I'm trying to add my airport express to my network. The airport utility shows a message that its gathering info about my network then suddenly an unexpected error message appears. Why is that?

i'm trying to add my airport express to my network. The airport utility shows a message that its gathering info about my network then suddenly an unexpected error message appears. Why is that?

Until Bob Timmons gets back to you, first decide what you would like the Express to do. I understand you want it for AirPlay remote speakers, which you can certainly do.
I am assuming that you are not using an Apple AirPort router; if that's not the case stop here and let me know.
If your existing router is not an Apple AirPort Base Station, the Express:
can "join" an existing wireless network as a client, for the sole purpose of streaming music. If that's what you want to do, do not connect it to your router with an Ethernet cable.
can "extend" an existing wired network to serve as an additional wireless access point, which can also stream music. If that's what you want to do, connect its WAN port to an available LAN port on your router using an Ethernet cable.
Then, "hard reset" the Express according to the instructions below, and configure it. The prompts should be self-explanatory. If you run into trouble, describe which of the above two configurations you decided upon, and the point at which you're getting the "unexpected problem".
To "hard reset" an AirPort Base Station: make sure it's powered up, then gently press and hold its tiny reset button. Don't apply any more force than required to feel a tactile click. Keep it depressed for five to ten seconds, long enough for its LED to flash amber rapidly. Release the reset button. Then, the LED will glow amber steadily for about a minute. Then, it will flash amber, slowly, about once every second or two, waiting for you to configure it with AirPort Utility.

Similar Messages

Why can't my Airport express be found by the airport utility?

Why can't my airport express be seen by the airport utility?

I have the same problem.
I have a Mac Pro OSx10.7.5, a Netgear router, A 1st gen Airport Express Model A1264 set up in Bridge Mode w/ LAN cable as Network 2 for Airplay, the iPad palys music and connects to the internet great through it. I want to extend Network 2 to another set of speakers in another room so I bought another AE A1264. "Like new"
So far I cannot get the computer to see the new AE at all. I have tried it wired to the router, wired to the Mac, wireless near the 1st AE, I've reset it and restarted multiple times. It just isn't showing up at all. ZIP. I get a slow blinking yellow light.
The Airport Utility "Configure Another"comes up with a Mac address I haven't seen before. I don't know if it's the new AE or not. In any case none of the passwords including " " for a password work. It spins and I get an error message that "An error occured while reading the configuration"
Even when it was new the first AE took some doing to be seen by my Mac which was plenty annoying since it should just pop up but it did eventually connect via LAN. Once I configured it it worked on my network.
These things have been a real pain. Please advise.

I have plugged my iphone 5s into windows computer, the computer picks up that its there and starts charging but keeps coming up with error message when i try connect to itunes... HELP!!!

I have plugged my iphone 5s into windows computer, the computer picks up that its there and starts charging but keeps coming up with error message when i try connect to itunes... HELP!!!

What does the error message say? (Precise text, please.)

Airport Express 802.11n not seen in utility scan

I have an Airport Express 802.11n and the Airport utility scan isn't seeing it. I've reset it back to factory and still not being seen. Help please

After a factory default reset, the AirPort Express is broadcasting a wireless network with a name like Apple Network xxxxxx.
If you are tying to configure the Express using wireless, you need to make sure that your Mac is logged on to this network first, before you open AirPort Utility.
It's also possible to connect an Ethernet cable from your Mac to the AirPort Express and then open AirPort Utility. Once the Express has been configured an updated, you can remove the Ethernet cable.

PROBLEM: Trying 2 add an AIRPORT EXPRESS to an already existing AIRPORT EXTREME network

I'm trying 2 add an AIRPORT EXPRESS to an already existing AIRPORT EXTREME network in my home.
I see the EXPRESS in ARPT UTILITY but when I click on "CONTINUE" or "MANUAL", the only option I'm given is to SWITCH networks, which I do not want to do.
I am using a MACBOOK PRO (MAC OS X 10.6.8)
Can someone offer me help with this?
Thanks!

Hi, I have a similiar setup. When you click onto the express, and it asks you to switch networks, it's not actually asking you to "change" networks. It's just actually switching to the xpress. When the xpress comes up, you'll input the name of your existing network, which you set up and named for the extreme. You'll have to change the extreme to "participate in a network", which is what you'll also do for the xpress. In the extreme under the WDS tab, you'll input the wds mode as "wds main". And then put a check mark in the "allow wireless clients". Where it says wds remotes, you'll input the the airport id's for the xpress's. In each of the xpress's, you'll set up as participating in a wds network. In the xpress's, under the wds tab, you'll set the wds mode to remote, and check
mark in the allow wireless clients. You'll have to input the airport id of the extreme in the wds main block. Under the internet icon on top, in internet conect tab for connect using: airport (wds), connect sharing: off (bridge mode).
Remember to insure that the express's show the same channel as the extreme, if you're using 802.11n (80211b/g compatible). Of course the security that you decide to use should also be the same.

I am trying to sync Go Rock TRMS03SR Bluetooth Portable 3D Surround Speakers with my Airport Express or iTunes So I can play Music in Multiple rooms. I have a WiFi network, my living room speakers are connected directly to Airport Express.

I am trying to sync Go Rock TRMS03SR Bluetooth Portable 3D Surround Speakers with my Airport Express or iTunes So I can play Music in Multiple rooms. I have a WiFi network, my living room speakers are connected directly to Airport Express, so how can I get the wireless bluetooth speakers to play at the same time in my bedroom?

Did you ever get this to work? My guess is that the speakers are out of bluetooth range at that distance.

How can I get the Airport Express to handle all the PPPoE stuff?

Hi, I’m visiting my family in China, and now trying to help my dad, with his Airport Express and how to set up a PPPoE connection.
We have currently set up the Airport Express in bridge mode (not distributing IP adresses and selecting DHCP under the Internet tab in admin utility). The Airport settings on our two computers is set up to connect using PPPoE using the given login name and password. (ps! we can not see the Base station in Airport Admin Utility when using these settings, we would have to select a new location from the Apple menu to see it and make condigurations.)
What we want is to do, is to have the Airport Express connect to the ISP using a PPPoE connection and not through the computer.
I know there is a 'Connect using PPPoE' option in Airport admin util, letting me input account name and password. If I select this setting instead of DHCP, enable distribution of IP addresses and configure my Airport card to NOT connect using PPPoE, I will see my base station in the Airport admin util with the IP address of 10.0.1.1 (or similar) and my computer will have x.x.x.2. Next to the Airport icon in the menubar, a scrolling message will say 'Looking for PPPoE host' without anything happen. I am sure my account name and password is correct as they've both worked when using this computer to connect to PPPoE (like now)
How can I get the Airport Express to handle all the PPPoE stuff without using bridge mode?
Ps! Both me and my dad have iPhones whom we can’t seem to get to connect unless its been distributed an IP address cause there's as fars as I know, no options of inputing a PPPoE user name and password.

Any solutions to this? I'm in China also, in Beijing, trying to get my Airport Express to work with an ADSL modem.
Direct ethernet cable connection to my Macbook works fine.
When I configure the Airport Express with the ID and password that seems to be fine also – Airport Express shows a green light.
But I cannot figure out the settings to connect wirelessly from my Macbook to the Airport Express. I get a constantly scolling message: "Looking for PPPoEhost..."
thanks
Paul

When playing iTunes from 2006 MacBook via Airport Express remote stereo speakers, the music keeps dropping in and out

I've tried hours and a trip to the Apple Store to resolve this problem, and no luck so far.
We have two Airport Expresses -- one is an older "g" version (from 2006), one is a newer "n" version (a couple of years old).
We have one older MacBook (from June 2006) (so it can only use "g" wireless and also cannot be upgraded to OS X 10.7 "Lion").
We have one MacBook Air and an iMac (both less than a year old), an iPad (about 2 months old), and a recently acquired AppleTV (in the past few weeks).
We also have two iPhones that do use our local wireless network on occassion.
We have stereo speakers that are currently connected into one of the Airport Expresses.
For years (until the past few weeks) I played music from iTunes on my first generation MacBook to the speakers with no problems (using the older "g" Airport Express). Recently, however, when playing music remotely over the speakers we have gotten fairly regular (though at random intervals) drops of the music in and out (drops are for a second or two each). So far, here's what we've tried to do:
(1)     Went to the Apple Store, where they thought the problem might be compatability between the g and n equipment in our house. They suggested that we get an Airport Extreme and use that as the base so that 2.5 GHz and 5 GHz networks could each be set up, allowing the two systems to play nicely. Spent a couple of hours setting everything up. No dice.
(2)     The skipping happens even when (a) I turn off the Apple TV; and/or (b) turn off the older Airport Express and just use the Extreme and the "n" Express (with the "n" Express as the connection to the stereo).
(3)      When I have the wireless network drop-down menu selected on my MacBook, the skipping occurs immediately after the computer is "looking for networks" (as shown at the top of the menu). The computer does this at random intervals on a regular basis. The skipping, however, will occur even if the menu is not selected.
(4)     Here's the weirdest part. The skipping has even occured when playing iTunes from our newish iMac, with the older MacBook shut down, with the older Airport Express shut down. In this case, the skipping only appears to occur when we have the wireless network drop-down menu selected and again, it occurs when the computer is "looking for networks" which occurs at random intervals. In this situation, the skipping only seems to occur when the menu is selected.
At this point, if I can't find another solution, I'm going to return the Airport Extreme, and just give up playing music over our stereo speakers from the MacBook (and instead transfer music to the iMac and play from it). But I thought I'd try a last-ditch effort to ask for help to see if anyone could figure out what might be causing the problem. I would chalk it up to the problems of using my old "g" network MacBook on a newer "n" system (though I'm not about to spend $1K+ to upgrade my laptop just for this), but for (4) above, which seems to indicate something else is going on.
Any help would be most appreciated!

Unfortunately, your description of the problem and the placement of both your main and AirPort Express routers does lend itself to believe the problem is most likely Wi-Fi interference. If it isn't the microwave or portable phones, it could be obstacles like walls between the routers that may be preventing the stream from consistently reaching the Express.
In your configuration, the stream will first travel to the main router, and then, from the main router to the AirPort Express. If, for example, you started the stream in the same room as the Express, that stream would have to travel across several rooms at least twice.

Apple TV doesn't show up in iTunes when AirPort Express is running at the same time - Can't play music on both Apple TV and AirPort Express speakers together

Hi there!
I am trying to play music from my Mac on multiple speakers, Apple TV and AirPort Express. But as soon as the AirPort Express station is plugged in, the Apple TV does not show up in iTunes anymore. When trying the same using iPhones Remote app it works perfectly.
Does anyone of you have an idea why iTunes does not show me both Apple TV AND AirPort Express? (it has nothing to to with the IP adress as the adresses are different).
Thanks for any help!

As my english isn't too good I made a screenshot to show you what I mean.
As you can see in the image below iTunes only shows me the computer speakers and the AirPort Express. But at the bottom you can see that iTunes actually recognized 3 different speaker (Mac, AirPort, Apple TV 2). Why does the Apple TV not show up in the multiple speakers window? Any ideas?

I just purchased a wireless connection for my Tivo but the signal strength from my airport express does not allow the tivo to load data. How do I increase the signal strength?

I just purchased a wireless N network adapter for the TIVO premier and am trying to use my apple airport express to connectand it is in the another room. I am only receiving one bar of strength on my network adapter. How can I raise the signal strength of my airport express.

There are several things that might help, not all of which would be feasible depending on your situation: (1) Move the TiVo unit and AirPort Express closer together. (2) Use another AirPort Express to "extend" the network of the first AirPort Express. Put the second AirPort Express half way between the first AirPort Express and the TiVo unit. (3) In the general case, Power-Line equipment might allow the TiVo unit to get a good signal, but it's likely that the Ethernet port of your AirPort Express is probably connected to your broadband modem, so that solution wouldn't work for you. (4) Changing the band or channel that the AirPort Express is using might help. If the TiVo unit is connection on the 5 GHz band, try one of the three-digit channels, which are allowed to use higher power.

Airport express just stopped extending the network

I have an airport express that I have been using for 3 years to extend the network in my house.
All of a sudden it started flashing amber. I've tried soft resets, hard resets, factory resets, and I can't get it to extend the network anymore.
I have 3 other expresses in the house that still extend the network, but this one won't.
Everytime I go run airport utility, it sees the express, and will actually allow me to JOIN the network (I get a solid green light, everything is good) but everytime I ask it to EXTEND the network, it gives me an error message and says it can't do it.
It's an old extreme, that I bought refurbished, so I might be able to accept it's old and needs to be replaced, but then why can I join the network, but not EXTEND the network?
Any thoughts would be appreciated.

Apple's instructions to "extend a wireless network" are on the main forum page and also here:
http://support.apple.com/kb/HT4259
Although the example pictures an AirPort Extreme as the "extending" device, the setup for an AirPort Express would be exactly the same.

Can Two Airport Express be connected to an Airport Extreme?

I have two Airport Express units and one Airport Extreme. One of the Airport Exp's is working to extend the Wi-Fi network for 8702.11b-g and I'd like to use the other to connect a Samsung Blue Ray via the ethernet port. Can the Extreme support two Express units in a mixed mode like I'm describing? The second isn't being recognized by the Airport Utility.
Below is my Mac environment.
(2) MacBook Pro's one with OSX10.7 and the other 10.6
(2) iPhone 4gs
(1) iPad 2
(2) Airport Express 1st gen (extending the wireless network) and 2nd gen I what to connect to the Samsung
(1) Airport Exteme Base station
Thanks for your help in advance.

As in other similr threads re the airport utility 5.6 is only one that can see all variants of airports as old as Graphite/Snow while 6.0 makes nice pics it won't see them to you get the WDS Remote airport ids set up in your main base router and vice versa-your main extreme base should be set up to run in 802.11b/g/n mode or g/n if oldest is 802.11g...other than that the only pain is airport express dongle routers are buggy, need firmware to be at least 6.0 inside them, not the airport util, and you are better off setting up manually as the tools do not set up WDS correctly without starting from scratch rebooting and resetting most all the routers- which if you just cant get going you might try...be sure you put primary extreme base main as the main router as "participating in WDS network" then the other 2 can simply be manually configured with same net name base main has and passwords and also you must install the airport ids (Mac address of the wifi ports which is usually 1 less than the airport ehternet mac address)... once you put in the exxpresses or older routers as extend a WDS NETWORK as a Remote (not a relay) you can definitely do what you state---you can hang your device off one of them via ethernet or USB and or wifi client and attach others as wiffi clients-unless you explcitly state which Macnooks will connect via access control ;osts of upi enab;e access cpmytp;(but then you need to add every devices MAC address in to whichever touter you want them to be able to be a client of-a pain but makes the most secure and traffic shaped network if you are limited on your wan port speed--i have 25/25 FIOS and get all of it direct eithernet to the main express and almost all near the exrress main within like 50 feet but I have to extend my net about 120 tp 150 foot radius around the main extreme 802.11n bae so I do exactly what you ask if you can do--with an express and an old Snow--and works pretty well surprisingly except the Snow goes belly up every couple days needs a power cylce--i am cheap so i will do it til it dies...you can just roam as I do with your laptops about your home then and link up to the nearest remote WDS airport or wind up on the extreme if you wander into the hub area...
--Not recommending this but if if you are very compulsive and usually use similar iPads or books in same rooms always and dont move them around much from the rooms they get used in (or if you just dont have enough coverage and are Wan limited on speed) you can specify each laptops Mac address so only those will bind to the wifi ports on say the older or slowest router-keep in mind that each remote adds a hope and so essentially cuts speed to 50 percent but I still get 16 mb/sec with a SNOW extending my 802.11n Edtreme base as a remote and I can get about 20 mb/sec on the other remote router express dongle (hate the things-had 2 break on me forever)....but like the airtuunes feature even though usually I use Apple TV to play music on steeo as its the old one with memory--great deal at 499 now 99-doh! good luck hope i made sense..

Error on Airport Express when using to extend Airport Extreme Base Station

I have had continual problems trying to get my Airport Express (n) to extend my Airport Extreme Base Station. The signal it is receiving is "good". The settings are correct (as far as I can tell) and it was working for a brief period of a month or so.
Now it is not working and I have a red 1 in a circle (like an update is needed... but it will not take me to an update) on the Sirport Express in my Airport Utility.
Under "Status", it says "Extended Network" with a green crcle, but the main circle on by the name is flashing green, and will not send a signal.
Also in "Status", it says this: "This AirPort base station was unable to extend the wireless network. Make sure the wireless network you're trying to extend was set up and is working correctly, that you entered a matching wireless network password into this device, and that this device is in range of the wireless network."
I have done all of those and yet..... STILL not working. Ugh.
Any thoughts? Procedures?
Thanks in advance.

At this point, I would suggest that you perform a "factory default" reset on the AirPort Express. In its default mode, the Express will broadcast an unsecured wireless network with a network name of something like: Apple Network NNNNNN.
Your Mac should recognize that there is a "new" AirPort Express present. You will find this on the dropdown menu from the AirPort icon on the OS X menu bar. Select the Express from the dropdown menu and the AirPort Utility should automatically start up to allow you to configure it.

Should airport express be configured with the same network as my existing router

Should airport express be configured with the same network name as my Verizon router.

Carolyn1962 wrote:
I am new to apple,used to windows.Apple store advised airport express in order to boost my DSL router.In order for it to be most effective should it be under the same settings.Still learning
A router signal can not be boosted as all routers put out the maximum allowed by law. However, proper placement of a secondary router will enable it to "repeat" or extend the signal.
An Airport can "extend" the WiFi created by another Airport. It can not extend a non-Apple WiFi. You need TWO Airport units, one to function as the main radio and the other to function as an extender. I used two Express units.
Configuration is simple if you start from a factory default condition. Connect the main Airport to AC power and finally to the Internet modem (or modem/router). Open Airport Utility on your Mac or other computer and accept all of the recommendations. After confirming that it works, insert your desired administrative and WiFi passwords.
Then connect the extender to AC power. As before, open Airport Utility on your Mac or other computer and accept all of the recommendations. No need to add password info.
Do not expect the Airport to respond instantly to the configuration commands. BE PATIENT!

IMac + Airport Express + eMac all at the same time?

I may be trying to do something that isn't possible (but it seems it should be!)
Upstairs I have a 24" white iMac running Leopard, with an ADSL connection.
One floor down I have an Airport Express connected to my stereo, which works, albeit at quite low volume.
Another floor down I have an eMac running Tiger, which connects to the internet via my iMac upstairs. This also works fine.
My question is this: I would like to have the iMac, the stereo and the eMac all running at the same time, but I don't know how to do it. It's a case of the airport express or the eMac, but not both. Maybe it isn't possible?
I'd appreciate any help.
Thanks

You need to configure the AirPort Express (AX) to join the network created by the iMac. Follow the directions in KB 302153, AirPort Express: How to join an existing wireless network in client mode.

I'm trying to add my airport express to my network. The airport utility shows a message that its gathering info about my network then suddenly an unexpected error message appears. Why is that?

Similar Messages

Maybe you are looking for