I'm trying to edit an unused portion of a recorded region in a garageband recording
How do I edit out an undesired section of a recorded region?
MrFestus45 wrote:
How do I edit out an undesired section of a recorded region?
http://www.bulletsandbones.com/GB/GBFAQ.html#cutsection
(Let the page FULLY load. The link to your answer is at the top of your screen)
http://www.bulletsandbones.com/GB/GBFAQ.html#cutsectionnospace
(Let the page FULLY load. The link to your answer is at the top of your screen)
Similar Messages
-
How do I move clips in one pane of iMove (10.0.3) into the timeline? iMovie somehow doesn't realize I'm trying to edit the clips.
Try this:
Select a small portion of the clip in the event (Above the timeline)
Click and hold and drag that section into the timeline, it should snap into place but if you drag it above another clip, it will not replace it but will be placed on top and the sound from the other clip will still play. Also this will allow you to use Blue/Green screen modes as well as picture in picture.
The best way is to drag it to the far right -
How to select unused portions of my clips
I shot a song/dance show during two different performances and have edited the best parts of both together. Now I'm wondering if it's possible to select only the unused portions of each performance — not to delete, as others have posted about — but to actually use, for outtakes, or to create a complete video that won't be seen on the DVD I create.
Is this possible?When you drag clips or parts of clips from an Event to a Project, an orange coloured line is placed along the base of the clip in the Event for the parts selected. So, all the portions of clips (or full clips) that don't have the orange line will be the pieces that you've not used in the Project. So, the unused bits are easily recognizable.
You can now drag the unused portions to a new Project and then burn a separate DVD using iDVD. Or simply drag interesting segments from the Event to your original Project and use these at the end as out-takes. (NOTE: See CORRECTION below).
Note that the unused segments may be easier to identify and select if you drag the Event thumbnail slider to the far left position, so that each thumbnail represents half a second of video. The slider is positioned at the base of the Events Library on the far right. There is a similarly positioned slider for Projects.
Note also that when you trim or extend clips in the Project timeline, the orange line on the Event clip is shortened or lengthened accordingly, to match your adjusted selection. So, the unmarked segments in the Event are still a valid representation of your unused media.
John
CORRECTION:
I just remembered that when opening a new project, you will not see the orange lines, as they only appear when the original project is open. To overcome this, duplicate the original project (File>Duplicate Project when in Project Library view) then add the unused media to the end of that project. Now delete all the clips or part clips used in the original project. This will leave you with just the earlier "unused" media in the duplicate project. Sorry about any confusion!
Message was edited by: John Cogdell - added CORRECTION paragraph. -
Some of my photos in Iphoto turn blank (white) when I tried to edit the size like zoon in and out.Can someone help me on this?
As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there? -
As i stated the adressbar looks very unsharp, and i tried to edit it or fix it in anyway, but nothing happens. in 3.6 and chrome it is sharp and i have no problems
Update the video display driver to the latest version.
You can try to disable hardware acceleration in Firefox 4.0:<br />
Tools > Options > Advanced : General: Browsing: [ ] "Use hardware acceleration when available"
You can also try to set only the <b>gfx.font_rendering.directwrite.enabled</b> pref to false on the about:config page. -
I am trying to edit my music list and then sync it to my iPhone 5 so I don't run out of storage space. However, I see the check marks on the iTunes library but am unable to uncheck them? How do I manually edit what will be synced to my phone? (the check marks are not bolded, does this mean they are not in my library but only on my phone?)
You uncheck the music in your iTunes library on your computer and along with sync only checked songs and videos selected under the Summary selection for your iPhone sync preferences with iTunes, only checked songs in your iTunes library will be transferred to your iPhone or remain on your iPhone and the unchecked songs in your iTunes library that are currently on your iPhone will be removed when syncing.
Or make use of iTunes playlists and choose selected playlists, albums, artists under the Music selection for your iPhone sync preferences with iTunes and select the playlists below that you want transferred to your iPhone. -
how to install windows 7 on my macbook pro mid 2009 using usb. right now iam using mavericks 10.9 can any one please help me. I tried to edit plist in boot camp but it went wrong please help me.
Iam new to coding. please help me.try the solution posted by kunu here and report back
https://discussions.apple.com/thread/5105056?tstart=0 -
I am trying to re-print a portion of a photo enlarged through "poster" in the print dialog box. The original photo printed just fine with the exception of one "page." This is what I'm trying to re-print. I have gone into the Multi- page box clicked on 4 x 4 and then selected the pages I did not want to print. This isn't working as it prints some pages and doesn't print others. All in all it is using a tremendous amount of ink for this project. Additionally I am printing on fabric which involves a deal of time in that preparation. The waste factor is turning into a huge cost. It should just be a simple thing to tell the print dialog box what I want it to do and have it do it. Help, does anyone have a solution?
Hi Pat,
Yes I marked the question as Assumed Answered. I needed to move on. I have never taken part in a forum and couldn’t wait any longer for any input so not wanting anyone to waste the time answering me, I marked the question as assumed answered. I guess this was the wrong thing to do and I apologize to the forum.
I did go another route and loaded and enlarged the photo in Photoshop Elements, Then cropped the photo to the area I needed to reprint. I probably should have done this in the first place!
Again, my apology to the forum for my lack of patience in waiting for a reply.
Diane Harris
Sent from Windows Mail -
I am trying to edit footage in PE12 from 2 different cameras and the output looks terrible
I am trying to edit footage in PE12 from 2 different cameras. One is a canon HD video camera taking AVCHD at 1440x1080 at 29fps. I am also using a canon 70D DSLR taking a MOV at 1920x 1080 at 29FPS
I want to make a 2 camera angle video. When i import both videos into PE12 and edit them together (i am dropping in footage and editing them back to back on video/audio 1) and start rendering, the output video is horrible. there are no straight lines and its blurry. the source video looks great...I am wondering if the difference in size of the 2 videos are messing up the project. is there anything i could do to make the final video look better?
I am very new at using this program and any information would be helpful...
thanks in advance,
jasonjason
Both 1440 x 1080 HD anamorphic 16:9 (pixel aspect ratio = 1.33) and 1920 x 1080 16:9 (pixel aspect ratio = 1.0) have the same
display, that is, 1920 x 1080. Whether you use a project preset for either, the space established by the project preset in the Edit area
monitor is 1920 x 1080 for editing. So, we achieve the goal of a 1920 x 1080 Edit area monitor space in selecting the project preset cited
above, that is
NTSC
DSLR
1080p
DSLR 1080p30
On the export side of things, it has long been suggested that 1440 x 1080 HD anamorphic content be exported with preset for 1920 x 1080 16:9
instead of 1440 x 1080 HD anamorphic 16:9 since both give the same display (1920 x 1080) and the choice 1920 x 1080 16:9 avoids the use of
a format that depends on a 16:9 flag to stretch the 1440 x 1080 for display after encoding. The latter has implications regarding issue of the player and recognition
of the 16:9 flag.
So, we should be OK on the import and export choices.
What about what happens between import and export. You wrote
I tried this solution and it seemed like it helped at first but when the final project was done, it looked bad again.
How did the final product look bad....was it the 1440 x 1080 HD anamorphic 16:8, the 1920 x 1080 16:9, or both that presented poorly in the export
which I am assuming was Publish+Share/Computer/AVCHD with Presets = MP4 H.264 1920 x 1080p30?
Depending on your further details, I have some suggestions for the Timeline content prior to export to file.
Please review and consider.
Thanks.
ATR -
I am trying to Edit a PDF and it keeps telling me to buy Acrobat Pro but I already have it and am paid up to 15 May 2015
Hey christopherc53009480,
Could you please let me know what version of Acrobat you have purchased.
Also, please share the screenshot of the message that pops on your screen as I need to analyze the exact issue.
Hope to hear from you.
Regards,
Anubha -
I am trying to edit my website which, was composed on iweb about 2 years ago. I have the website stored on my hard drive. When I open iweb, I can't figure out how to load the website into iweb for editing purposes. Any help would be greatly appreciated! Thanks
You need to migrate to a modern, supported webpage development application and leave iWeb behind. It hasn't been supported for 2 years now and was behind the curve feature wise when it was dropped by Apple.
One app that many have migrated to because it is very similar to iWeb in the GUI and features is Everweb. It has a demo version that you can try. Text and photos from you current published site can be copied and pasted into Everweb to help the migration over.
There are other possible candidates. Just search the iWeb forum for "iWeb alternative" or "iWeb replacement" to get a list of topics discussing them. -
I recently had some 8mm film transferred to DVD. I am trying to edit the film clips using Premier Elements 4.0. so I can reburn the films on a single BluRay disc. Some of the film clips copy into the project but others don't. I tried copying the VOB filed onto my hard drive and then changing the file extensions on the VOB files to MPEG but this was no help. Some of the VOB files contain numerous film clips but my software does not appear to be able to recognize them as such. I need to know if replacing my old Premier Elements with the new Version 13 would solve this problem or not. Any advice would be greatly appreciated!
BobBob
What do you have now.....
What computer operating system do you have?
We can go into the finer points of source and your intentions, but for now it would appear that you are using SD 4:3 source media to get to a HD 16:9 result. Lots to discuss in this regard.
What was given to you on the DVD disc? DVD-VIDEO 4:3 or something else?
If DVD-VIDEO on DVD disc, you should expect to find on the disc a folder named VIDEO_TS. That is your target for your video files.
If you were given a DVD-VIDEO on DVD disc, then all you want from it are the video files, specifically
VTS_01_1.VOB, VTS_01_2.VOB, and so on through that series until possibly getting to
VTS_02_1.VOB, and so on. How many files you have beyond the VTS_01_1.VOB file will depend on the size of the DVD-VIDEO.
Does the above scenario apply to you?
The alternative might be someone giving a DVD disc (data disc) which contains just the VTS files mentioned which were copied from
the VIDEO_TS Folder. So, you do not get the whole VIDEO_TS Folder, just the essential video files. Does this scenario apply to you.
I see no need to replace your Premiere Elements 4 with a later version unless you have a huge project and need a later version that will be a 64 bit application running specifically on Windows 7, 8, or 8.1 64 bit computer.
Consider...Premiere Elements 4 and if you have DVD-VIDEO on DVD....
1. Place the DVD disc in the burner tray
2. Open Premiere Elements 4 and set the project preset for NTSC DV Standard (assuming you are working in a NTSC setup)
3. Go to
Get Media
"DVD, Digital Camera, Mobile Phone, Hard Drive Camcorder, Card Reader"
"Adobe Premiere Elements - Media Downloader" and its Advanced dialog.
Set the Source in the latter dialog for the drive which has your DVD disc inserted in its tray
You should see your VTS_01_1.VOB thumbnail in the "Adobe Premiere Elements - Media Downloader" Advanced dialog.
With this VOB selected, click on Get Media to get the file from there into the project.
Should work fine.
Complications may be involved if the people who processed your footage gave you something other what is described above.
Please review and consider, and then we can plan our project strategy accordingly.
Thank you.
ATR -
i have recently moved from the uk to australia and cancelled my uk debit before the payment was processed for songs i bought in itunes. i have tried to edit my billing info with australian debit details but the site says 'invalid card' how can i fix this?
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
i hope someone gets this who can help me. i don't find anything helpful in the help section of icloud. i'm using my 4th generation itouch for about 3 weeks with the ical. but today when i tried to edit an event or add an event a window would pop up and say "event can't be saved" or "no calendar chosen" or something like "this event doesn't belong with this calendar" and stuff like that.
can you please help me fix this?You could repartition your drive to have a different OS X with the older iTunes there, and the newer iTunes on the existing partition. Back up everything beforehand. See Kappy's advice in this thread. Partitioning my Hard Drive
-
I am using Lightroom 5 and am hapy about it, but recently I hav encountered a problem when trying to edit an image in another program, i.e. Elements. I used the clone tool, saved the result and went back to Lightroom to open the image there. I did find a second copy, but this is identic with the one I already had in Lightroom, and I can see noe result of the clone process.
At the moment I would say it is uncertain whether Acrobat is completely ignoring the change, or whether the changes you are making aren't affecting the ink density. I have a suggestion for a test you could make to see which is the case.
When editing in Photoshop just add a box or mark on the image, for your tests.
- If this box does not appear in Acrobat, you know Acrobat is not seeing the edit
- If this box does appear in Acrobat, you know the problem is that your tool for changing ink densities is not taking effect.
Maybe you are looking for
-
Over the past several days I've had issues with calling several toll free numbers which end up in the Cincinnati area. Called the toll free provider and they don't see an issue but said they look like dropped calls coming into their network from an
-
How do I export a trimmed video?
I select only the part of the clip that I want to keep, then use the trim to selection menu item, then finalize project, then export, but the exported video still contains the trimmed parts (the parts that I removed using trim to selection)...
-
Hi Experts! Can anyone tell me the BAPI to Display the Delivery Status for a particuler sales order no or document no. Thank U...
-
SQLWRITER (hr = 0x80004005. SQLSTATE: HYT00, Native Error: 0)
Hello, I have installed on my Microsoft SBS 2003 server: 1. MSSQL server 2008 R2 We use this SQL server services: SQL Server (ACRONIS) (Acronis backup software) SQL Server (MSSQLSERVER) 2. Microsoft SQL server desktop engine (service SBSMONITORIN
-
Removing bookmarked sites from the Start Screen
I use to be able to hold my thumb on a bookmarked site on my Start Screen and a menu would pop up giving me the option to remove it from the Start Screen. Since upgrading I can't do that. So how do I remove a bookmarked site from the Start Screen?