I'm trying to export an ID image as a jpg and don't know how to save it at 1920 x 1080.

Could use some advice on the following question:
I'm trying to export an image as a jpg and don't know how to save it at 1920 x 1080.

Thanks Eugene. I was taking the question literally—the OP wanted to directly save a .jpg at 1920x1080 from ID.
If the ID document is set up as 1920x1080 pixels you could export as PDF and open into PS at exactly 1920x1080 by setting the res to 72 in the import dialog.
Of course the converted PDF has no compression applied (at least to native ID objects) and would have some higher quality than an exported High quality JPEG.
But the OP needs a JPEG and if you want to compare compression artifacts, you would have to save the opened PDF as JPEG, close and reopened. With PDF there is the option of saving the opened PDF with Maximum quality, which is probably better than ID's JPEG export High quality. But If I compare the 2 methods in a layered PS file it's hard to discern a meaningful difference. See Compare.psd in this zip
http://www.zenodesign.com/forum/ExportTest.zip
Direct
PDF to JPEG

Similar Messages

New PC with Windows 8.1 trying to sync phone but receive following error message and don't know how to fix: iPhone cannot be synced. You do not have enough access privileges for this operation.

In downloading iTunes onto my PC (Dell XPS 8700) with Windows 8.1 trying to sync my iPhone but receive keep receiving following error message and I just don't know how to fix: iPhone cannot be synced. You do not have enough access privileges for this operation.
I would greatly appreciate help with this matter.

See if the user tip helps: https://discussions.apple.com/docs/DOC-6562

TS2446 Hello, I'm Bethany and I'm having trouble with my apple ID I tried to buy something from he app store and they assed me some questions and anyway i have locked my account and don't know how to unlock any help with be very helpful thanks.

Hello, I'm Bethany and I'm having trouble with my apple ID I tried to buy something from he app store and they assed me some questions and anyway i have locked my account and don't know how to unlock any help with be very helpful thanks.

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

HT1918 I am trying to set up my new replacement iphone 5 and i dont know how to transfer my back up to the new phone.

I am trying to set up a new iphone 5 replacement and i don't know how to get my back up to the new phone.

Well you would be first need to be using the ITUNES program. Not be on itunes the internet page. The program will usually be a music note icon on your desktop. IF YOU ARE GOING TO THE INTERNET = safari , internet explorer, firefox, etc ....your not using the program itunes. YOur surfing the web.
with that said , always make sure your running the latest version of itunes. If on a mac >in the upper left , next to the little Apple, click on the word itunes> check for updates.
windows users > where it says FIle EDIT View Controls Store Help across the top> select help > check up updates
>Then plug your phone in
> then when it appears in the itunes window , click on the iphone > it will bring up the option to restore from back up

Q1:Export drawingpane to image (gif,bmp,jpg) and Q2: printers

Hi
Q1:Does Java have functionality for exporting awt graphics in the drawingpane to an imagefile with some common imageformat, like gif, bmp or jpg?
Q2:Does Java ... for sending awt graphics in the drawingpane to a printer, so it can be viewed on regular paper?
Id like to add an export menu in my viewer and export the graphics to an imagefile.....and it would also be nice if I could use a printer function.

Hi,
there is no direct export function. However, it's easy enough to export to an image:
1.) Create a BufferedImage of the same size as your canvas
2.) Invoke getGraphics() on the image to obtain a Graphics instance
3.) Invoke paint(Graphics) on your canvas with the image's graphics
4.) Write the image using ImageIO.write(...). It supports all major image formats.
Exporting to a printer is a bit more tricky, I can't provide any 'solid' information on that right now as I don't have access to my source samples.

I am trying to scan multiple pages from my scanner using a Mac and don't know how to

Hi there,
I am trying to scan multiple pages using HP Deskjet 3070A (Print Scan Copy) and it is all wireless using a Mac OSX 10.6 Snow Leopard and it won't let me. And I am trying to send this document via email.
Can you offer advice as to how I can do this.
Much appreciated.
This question was solved.
View Solution.

Hi,
Please refer manual for the printer and page 26 from link below.
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

I have a clickfree backup drive and don't know how to restore my previous bookmarks? I tried to copy the places.sqlite file from the backup drive to my compute

I have a clickfree backup drive and my computer crashed. I restored it to factory settings and reinstalled Firefox but cannot figure out how to get my old bookmarks back. I tried to replace the new places.sqlite file with the one I had on my backup drive but still got nothing? I tried to use the restore option but it won't take the old places.sqlite file. Is there anyway to get my old bookmarks? I'm really not a techy person.....
Thanks

Bookmark Backups
Type '''about:support''' in the address bar and press enter.
Under the page logo on the left side you will see '''Application Basics.'''
Under this find '''Profile Folder.''' To it’s right press the button
'''Show Folder.''' This will open your file browser to the current
Firefox profile. Now '''Close Firefox.'''
Enter the '''bookmarkbackups''' folder. This is where Firefox makes backups
of your bookmarks. Look for the '''jsonlz4''' file you want to restore
(check the time / date / size). Right click on that file and select '''Copy.'''
Now go back to the profile folder where you started. Rename the file
'''places.sqlite''' by adding '''.old''' to it. Now right click in the folder
and select '''Paste.''' The file you just pasted here, rename it to
'''places.sqlite.''' After you are done, restart Firefox.
Edited to correct file name error.

HT4759 I paid to rent a film and don't know how to download it to watch tryed everything

I can't get films downloaded to watch so annoyed

iTune Store>Movie>Download (see bottom right). Tap to enlarge image.

HT201359 Trying to verify my Apple ID account and don't know how too

I'm trying to verify my Apple ID account and it sends me to my email to verify it but it doesn't indicate where to verify it.

You may find this Apple document helpful.
Apple ID: Associating and verifying email addresses with your Apple ID

I'm trying to take the bookmarks from my iphone 4 to my linux laptop and don't know how.

I know how to sync perfectly fine, but am fearing if I do it might just wipe the ones off my phone.
So how do I transfer them from my phone to laptop?

Do you mean delete the music from your phone, or copy the purchases over to your computer's iTunes ?
If delete then you can enable the left-hand sidebar that used to show automatically on previous versions via option-command-S on a Mac, control-S on a PC - you can then select the Music category under the phone 'device' on that sidebar and use the right-hand side to select and delete music from it.
If you want to copy your iTunes purchases over to your computer's iTunes then File > Devices > Transfer Purchases should copy them over (if you are using a PC and the drop-down menus aren't showing then control-B should get them to do so)

Trying to do smartserve on line, pop ups are blocked, don't know how to unblock them

How do I unblock pop ups

See this: <br />
https://support.mozilla.com/en-US/kb/Pop-up%20blocker#w_pop-up-blocker-settings

I'm trying to export a raw image from lightroom 5.6 to Photoshop cc 2014 2.1. I right click to export menu in lightroom as I've always done to export to Photoshop. Photoshop opens, but it can't open file, window opens to find a file to open. I'd like t

I'm trying to export a raw image from lightroom 5.6 to Photoshop cc 2014 2.1. I right click to export menu in lightroom as I've always done to export to Photoshop. Photoshop opens, but it can't open file, window opens to find a file to open. I'd like this to export my lightroom images to edit in photoshop as it has always been able to do for me. What fix do you recommend?

Hi Ashley Clavette,
The Initial view setting works perfectly when the file is opened in Acrobat after setting the desired Initial View.
When you upload the file onto Wordpress, and view it on that website in the browser...it might be using a different pdf handler program which might be causing this issue ( it would be helpful, if you could provide the screenshot) , however when you download the pdf again from wordpress server...and open in Acrobat/Reader...then what exactly happens ? Does the pdf opens in the desired Initial View setting?
Rahul

I want to use Get Panel Image in Labview 5.0.1 and need details on how to save the BMP data generated

I am trying to generate an application that saves a copy of its front panel on completion. This is easy to do using an invoke node with Print VI to HTML but this does not work in an .exe format. I have seen elsewhere that you have to use the Get Panel Image method, but no details are supplied in LV 5.0.1 documentation of how to use the "image" data (1-D Unsigned Byte array) that is generated. I want to save this in a format that can then be read as a bitmap in any standard graphics package. Any assistance?

Hi,
If you'd upgrade to LV5.1 or 6 you could use the 'standard' vi's for this.
You need a VI called "Write BMP File.vi". It's not shipped with LV5.0.1.
This vi only uses 3 subVI's, so perhaps someone at NI can convert it and
send it to you (sorry, I won't, it's copywrited).
If you cannot get this VI anywhere, you'll need to figure out the BMP file
format yourself. It's not too complicated, but still could take some days.
Perhaps someone figured it out before LV5.1 was released.
Regards,
Wiebe.
"RDK" wrote in message
news:[email protected]..
> I want to use Get Panel Image in Labview 5.0.1 and need details on how
> to save the BMP data generated
>
> I am trying to generate an application that saves a copy
of its front
> panel on completion. This is easy to do using an invoke node with
> Print VI to HTML but this does not work in an .exe format. I have seen
> elsewhere that you have to use the Get Panel Image method, but no
> details are supplied in LV 5.0.1 documentation of how to use the
> "image" data (1-D Unsigned Byte array) that is generated. I want to
> save this in a format that can then be read as a bitmap in any
> standard graphics package. Any assistance?

Anyone know how to Save an Java Image to gif or png file?

I'm trying to build a Map Edito for game, I want to import some images which and a lot of tiles in each of them. I want to cut each tile 24x24 out, then save it in an invidual file.
Anyone know how to save to file? any easy way?
I know there is somehthing call JPEGEncoding to save into jpeg...
thanks!

Java Advanced Imaging does it nicely, take a look.
I do not remember the extact syntax right now, but have used it in the past.

My ipad 3 is frozen on the plug into itunes page. I have tried to follow advice I have found on these pages but I don't know how to connect the ipad to my mac (there is no usb port on an ipad). If anyone could help it would be appreciated.

My ipad 3 is frozen on the plug into itunes page - it won't turn off or on - just stuck. I have tried to follow advice I have found on these pages but I don't know how to connect the ipad to my mac (the advice is to connect ipad to mac and there is no usb port on an ipad). If anyone could help it would be appreciated. Going nuts.

I think you should probably also read the iPad User Guide. You didn't say what version of iOS your iPad is running, so here's the links to both the iOS 6 and iOS 7 (PDF) versions:
iPad User Guide for iOS 6
iPad User Guide for iOS 7

I'm trying to export an ID image as a jpg and don't know how to save it at 1920 x 1080.

Similar Messages

Maybe you are looking for