I'm trying to organize my movies with folders.  When I click "new folder", it either doesn't add any folder or adds a new folder as a "subfolder" of an existing folder.  Help!

I'm trying to organize my movies with folders.  When I click "new folder", it either doesn't add any folder or adds a new folder as a "subfolder" of an existing folder.  Help!

Thank you for the suggestion - I tried it but still didn't work.  When I click "New Folder" it gives me the pop-up to name the new folder, but doesn't put a new folder anywhere in my Project Library.

Similar Messages

  • Problem with folders when I click on some of these

    Hi, I've got a problem when I click on some of my added folders on a system form (Service Contract).
    I added five new folder. The three first are perfect, I don't have anything to say about it, but the last two one cannot be focused correctly.
    By example, suppose five folders: fol1, fol2, fol3, fol4, fol5 added respectively from fol1 to fol5. Suppose I click on fol2. Then if I click on fol4 or fol5, theses one will show the right controls (the panelevel is changed appropriately), but the "image" of the folder still stay on fol2. This doesn't happen when I'm in add mode, but in all other modes.
    Thanks in advance !!
    By the way, anyone know how to change the total width occupied by a group of folder ?
    François
    Message was edited by: Francois Robert-Nadeau
    Is it possible that it could have a maximum of folders that we can put on a system form ?

    The total width occupied by the group of folders is not changable, it's determined by the width of the caption. But however, the real visible 'folder' is determined by a rectangle. (Also see this image: http://zooi.ookvan.mine.nu/folders.JPG)
    And concerning your "pressed" status of your fol4 and fol5, (if you're not have more folders then 9, as Lita mentioned) Isn't there a event that catches the click or item_pressed event? Because if you set the bubbles event and set the BubblesEvent, SBO see you are saying "Hey, I'm done", and does nothing more. So it does not change the status of the folder item...
    Hope it helps...  Grtz, Rowdy

  • Hi, haven't used iMovie in years.  I shot some video with my cell phone camera (Samsung Galaxy S2).  When I tried to make a movie, the clips I downloaded played back sideways on iMovie.  Is there any way I an flip the video from horizontal to vertical?

    Hi, haven't used iMovie in years.  I shot some video with my cell phone camera (Samsung Galaxy S2).  When I tried to make a movie, the clips I downloaded played back sideways on iMovie.  Is there any way I an flip the video from horizontal to vertical?  Thanks.

    You actually want a vertical video??
    What would you show that on?!
    Rotating video or photos in iMovie 11:
    http://help.apple.com/imovie/#mov3a884fd3
    In earlier versions of iMovie you can also do this using Quicktime Pro 7:
    Open MOV file in QT Pro (QT 7.6.6)
    Window -> Show Movie Properties
    select "Video Track"
    select "Visual Settings" from lower window
    check "Preserve Aspect Ratio"
    Click on appropriate rotation icon (MOV rotates!)
    Click back on the open MOV in Player Window
    FILE -> Save
    You can also do this using TransformMovie, available here:
    http://www.macupdate.com/info.php/id/21859

  • HT1551 When i tried to purchase a movie, My Apple TV said it would take 11 hours to load. Any ideas about what to do or what is going on with that?

    When i tried to purchase a movie, My Apple TV said it would take 11 hours to load. Any ideas about what to do or what is going on with that?

    It always has a very high number at the beginning, but it never takes that long....
    However, it can take several hours....I've found this to be true on any device or computer I've downloaded movies or tv shows on - Mac, PC, iPad, Kindle Fire....you name it.
    However, even if it does take a long time, that does not prevent you from starting to watch it as soon as it has done a little downloading. Here is the Apple link for typical download times:
    http://support.apple.com/kb/HT1577
    Here is a link with Purchased Movie FAQs:
    http://support.apple.com/kb/ht1906#faq24
    Cheers,
    GB

  • Markers on clips don't move with project when switching media drives

    Here's an odd one. I'm editing a project in Premiere Pro CS6 and in order to avoid carrying drives back and forth between two editing locations, I cloned the footage drive and have one duplicate drive in each location. I'll call them location A and B.
    I have no problem relinking clips when I move back and forth from location to location. That's all working great, as expected.
    When I am reviewing clips at edit location A, I've been placing a marker on the hero moments to make them easier to find later when editing. The strange (or perhaps perfectly normal) thing is that when I move to edit location B and relink the clips, all of my markers that I made at location A are gone.
    The same thing happens when creating markers on clips at location B. When I move to location A, the markers made at location A are there, but the new ones added at B are gone... until I return to location B.
    In other words, it seems like markers are not saved as part of the project, but are saved within each clip file. If that's true, what I'm experiencing would make sense. Even though I'm relinking the clips when I change edit locations, the markers are part of the footage files on each of my duplicate drives and do not move with me when I change locations.
    I just wanted to confirm this is "how premiere pro works," or see if there is a preference checkbox or workaround I'm not aware of. Maybe I've found a bug? If this is just how it is, I'll have to come up with an alternate way to mark footage I'm reviewing, or just move the drives with me when I move, which I'd love to avoid.
    Thanks for any thoughs on this anyone has.
    Billy Sheahan
    Chicago, IL

    Wes, my deepest apoligies for not responding to your kind answer sooner. I had moved on, thinking it was just one of those things, until another editor colleague of mine, found my original question recently and emailed me to find out if there was a solution.
    It appears that even with Premiere Pro CC, copying the XMP sidecar files to the second media drive remains the answer. Sadly my editor friend did most of his pre-edit clip marking in one city and traveled several states away to begin the edit and when he arrived, all of his marks were, of course, not there.
    It would be great if somehow the metadata could be tied to the project, rather than the sidecar XMP files. Perhaps not technically feesible, but it would certainly make more sense from an editing standpoint to not have to be copying sidecar files every time you move to a edit location with duplicate media drives.
    I will most likely write a feature request to see if this can be achived in future versions of Premiere.
    Thanks again for your support and reply.
    Billy

  • IPhoto will not open with pictures when I click on the icon.  It does show that it is open on top toolbar. What happened to my photos?

    iPhoto will not open with pictures when I click on the icon.  It does show that it is open on top toolbar. What happened to my photos?

    Did you run any updaters recently, i.e. like just before this happened?  Try this first fix: make a duplicate copy of the library and try the following:
    1 - delete  the iPhoto preference file, com.apple.iPhoto.plist, that resides in your Home/Library/Preferences folder. 
    2 - delete iPhoto's cache file,, Cache.dbt, that is located in your Home/Library/Caches/com.apple.iPhoto folder. 
    3 - reboot, launch iPhoto and try again.
    NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto.  You'll also have to reset the iPhoto's various preferences..
    OT

  • Im trying to put music on my iphone. when i click music all it says is "itunes match is on" and only lets me click a box that says "sync voice memos" what do i do

    Im trying to put music on my iPhone, when i click music all kt says is itunes match is on and has a box for me to click sync voice memos nothing else what do i do

    Correct.  When you purchase devices, they would have stated the OS they needed to work, on the box.  This can be overlooked, but it is very important to check when purchasing. 
    You current OS, is so old, that they technology build into the new devices, is not something your OS understands.  It didn't exist when your OS was created, and therefore you need to upgrade the OS to work with the newer technology of these devices.
    10.6 software is not downloadable.  You must purchase a DVD disc.  You can order it from the on-line apple store
    - http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard.

  • I'm trying to back up my iphone from when I last backed up and it won't sync any of my songs.  How do I sync it?

    I'm trying to back up my iphone from when I last backed up and it won't sync any of my songs.  How do I sync it?  Also, if I set up my phone as a new phone, will I lose all of my messages?

    My 4S stopped automatically backing up at night when I updated to the new OS. I cannot manually force it to either. Possibly an issue with the new OS??

  • When I add a new bookmark, and the (star) Page Bookmarked window appears - is there any way to expand the size of that window so that I can see my entire list of folders when adding a new bookmark to an existing folder?

    When I add a new bookmark, and the (star) Page Bookmarked window appears - is there any way to expand the size of that window so that I can see my entire list of folders when adding a new bookmark to an existing folder? The endless scrolling technique is far too tedious when trying to add a new bookmark, because the window is simply too tiny. Is there maybe a plug-in that will let me grab the corner of that window and re-size it? Thanks!

    I suggest you install the "Add Bookmark to Here2" extension, then you can expand the the list but you will not see the bookmark itself in the list if that is what you wanted. At the top you have three major folders you can select one of them and scroll up and down. Below that you have your most recently used folders and you can select one of them instead and scroll up and down. You can see the folder the bookmark is in -- they get added to the bottom
    If you really want to see the bookmark within the folder the same extension allows you to bring the bookmark to the folder from say the bookmarks sidebar that is why it is named as such. I use it but mainly i use the dialog.
    Please continue reading about bookmarks and some related extensions at
    * http://kb.mozillazine.org/Sorting_and_rearranging_bookmarks_-_Firefox
    * https://addons.mozilla.org/firefox/addon/add-bookmark-here-2/
    * http://dmcritchie.mvps.org/firefox/firefox.htm#addbookmarkhere2
    * http://dmcritchie.mvps.org/firefox/kws.htm
    If you are not using tags at all, you can remove a whole lot of confusion by removing them from the dialog via the extension.

  • I'm missing a lot of my pictures on my phone after going to the cloud. You cab see that the were there but it's just a grey tile now.  When I click on it it just spins loading. Any help would be appreciated.

    I'm missing a lot of my pictures on my phone after going to the cloud. You cab see that the were there but it's just a grey tile now.  When I click on it it just spins loading. Any help would be appreciated.

    I, on the other hand, had no brightness issues on the 4S after upgrading to iOS 6, and no change in (good) battery life.  If could be something else, an app or background process that is less efficient with iOS 6?  Could be anything.

  • HT1491 i rented movie on ipad. when i click play it says cannot open. any suggestions?

    i rented movie on ipad. when i click play it says cannot open. any suggestions?

    At this point I would contact iTunes by:
    https://getsupport.apple.com/ServiceOptionAction.action
    iTunes > iTunes store > connecting and downloading > movie rentals > chat or email with iTunes.
    They should tell you what to do or how to fix it.

  • HT3576 Ok so i have this iPod touch (3rd gen) and i'm trying to update it through iTunes and when i click  check for update it keeps saying this version of iPod software (2.2.1) is your current version. what do i do? how do i update it?

    Ok so i have this iPod touch (3rd gen) and i'm trying to update it through iTunes and when i click  check for update it keeps saying this version of iPod software (2.2.1) is your current version. what do i do? how do i update it?

    You have a 1st generation iPod Touch. It can not be upgraded beyond iOS 3.1.3, it is available at the link below.
    http://support.apple.com/kb/HT2052

  • HT1390 I've rented & downloaded a movie on my computer in itunes, but it does not show up on my Apple TV.  Everything else shows up on Apple TV, including my computer's movie library.  When I click on the movie in Apple TV it says I've already rented it.

    I've rented & downloaded a movie on my computer in itunes, but it does not show up on my Apple TV.  Everything else shows up on Apple TV, including my computer's movie library.  When I click on the movie in Apple TV it says I've already rented it and asks if I want to rent it again.  No, I just want to watch it.

    Unfortunately I have to if I download it on my computer.  I have rented itunes movies before directly using the Apple TV and it worked just fine and I could stay in the living room.  Without clicking that icon on my computer, there was no way to watch it.

  • I am using a jvc video camera and i am trying to upload the videos to iMovie. when i click "upload on pc" on the camera,nothing shows up on iMovie. I clicked on "Import from camera" on iMovie but nothing came up. Just my webcam.

    i am using a jvc video camera and i am trying to upload the videos to iMovie. when i click "upload on pc" on the camera,nothing shows up on iMovie. I clicked on "Import from camera" on iMovie but nothing came up. Just my webcam.

    I would say that odds are high that you have a bad cable. Maybe that is why they returned it.
    I would suggest trying a different firewire cable.
    You can find Firewire cables inexpensively at monoprice.com. You need a 4 pin to 9 pin firewire cable.
    Here is a link.
    http://www.monoprice.com/products/subdepartment.asp?c_id=102&cp_id=10301
    Other things to check:
    Is your camera plugged in to wall power (not to batteries only). Must be hooked to an AC power source to import.

  • Im trying to purchase an iphone 6 but when I click the check out button it says that my cart is empty basically my iPhone 6 disappears off my cart

    Im trying to purchase an iphone 6 but when I click the check out button it says that my cart is empty basically my iPhone 6 disappears off my cart

    I tried powering down and re-starting the iPhone (as suggested at http://support.apple.com/kb/TS1275). This seems to have cleared the "...not connected to the Internet" problem, and iOS 6.1 is now in the process of downloading.
    Thanks very much for your feedback.

Maybe you are looking for