I made A restor with erase from my IPad sitting and it's start and appear on screen apple logo with bar under it but noyhing happened still from 2 hour on this stution
I made A restor with erase from my IPad sitting and it's start and appear on screen apple logo with bar under it but noyhing happened still from 2 hour on this stution,,what can i do?
See if this page helps : http://support.apple.com/kb/HT4097 - it mentions 'showing the Apple logo with no progress bar or a stopped progress bar, for over ten minutes.'
Similar Messages
-
Hi When going from Develop module to print module a white boarder appears on screen which also prints via my epson r3000 printer. I can get round this by exporting photo to Elements and printing from there but can i get rid of the boarder and print from lightroom?
In the printer driver (accessed through the Page Setup button) set the Advanced tab to borderless. Then in the right hand panel under Layout set all the margins to zero.
-
i have the i phone four and just uploaded to my computer and now it will not work has the apple logo with a long oval bar under it
It may be that it is stuck loading. You will want to probably first attempt a Hard Reset (Home Button + Power Button for 5-10s until it restarts with an Apple Logo then let it load up) and see if this will get it working.
-
Yellow Tint Macbook Pro After Boot Up Screen(Apple Logo with White Background)
Hi guys
I have just recieved my macbook pro 13" 2012 base model, the screen is yellowish when compared to other macbook pros.
The strange issue is that I notice when I power it on, the screen is normal(white is white) at the boot up screen(white background with apple logo in the middle). But the screen will turn yellowish at that screen right before it finishes booting up(right before the screen logs in), like it has loaded a display profile. But thats is not the case though because my display profile is at default like others.
So the screen turns yellowish right before it finishes booting up and comes to my desktop screen.
Any suggestions please? this is my first macHi Colloc
I bought my macbook from the apple online store.
I found out that every macbook pro screen changes colour before the booting up process completes. I did a comparison with another macbook pro (same model) and it turned out like that too. but the thing is, during usage, it can clearly be seen that my screen has a stronger yellow tint compared to the other one.
I returned my macbook and got a refund for now. I really want one but not sure if I should try buying one again.
I sure yours is normal -
Boots to black in OS X mode (I believe 10.10.2? tough to check right now). I can boot into Windows 8 using Boot Camp without incident. I have booted to Disk Utility and run Disk and Permissions Repair. I have booted into Diagnostics, and no issues were found (ADP000 was the Reference Code given). I reset the PRAM, which gave a louder chime than I had been getting when failing to start up OS X, but otherwise no change. Feeling that my options were exhausted, I attempted to restore from Time Capsule, and it won't connect to Time Capsule, despite Time Capsule being the active router whose network I am connected to. Please advise.
(This is my girlfriend's computer, she tells me that she selected an option to perform an automatic update later, that night.)Install or Reinstall OS X from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
the Security button and set the Zero Data option to one-pass. Click on
the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless.
This should install the version of OS X that you had installed.
Be sure you only work on the OS X volume, not your Windows volume. I cannot tell you if you will still be able to boot the Windows volume after the above. You will need to find a fix for that. -
Apple logo with spinning wheel in Mac OS X 10.8.5
I have a 15 inch MacBook Pro with 4GB ram and 2.4 GHz Intel i5 and OS X 10.8.5 and everytime i boot up it gives an apple logo with the spinning wheel, after 3 or 4 boot try, it actualy boots normaly to mac os x normaly. I already repaired the permissions, reseted the PRAM, and still no use.
I often use heavy programs like Final Cut Pro 7 (.0.3), Firefox, EyeTV, and Soundtrack Pro.I already done this way and still no due
here's a list of things i've already done:
- Reset the PRAM
- Uninstalled some programs i didn't use, like the older versions of iLife, iWork and MS Office for Mac
- Repaired permissions
- Uninstalled most third-party content i didnt use, like the black barry files.
I also did a full backup and a full reinstall of the OS and software I used most such as the latest version of Adobe's CS6, and Sun Office suite and the MS Office for Mac, and the Final Cut Pro X suite and Final Cut Pro 7 suite. -
i've jail break Iphone 3GS. i tried to restore setting (erasing all data and media) without connecting to computer/itunes. When it starts it freezes by showing apple logo only. what is the solution. please help me out. Here i don't have iphone service center too.
Although not illegal, Apple discourages a user from modifying the iPhone OS in any manner, including "jailbreaking". Apple feels so strongly about this that discussing methods to assist a user trying to either jailbreak or "unjailbreak" an iPhone are prohibited.
-
I tried to reset my iPhone (3gs) with deleting all data. When it power off and automatically again on then it is showing Apple logo only. Not restore and startup my phone. iPhone alerming low charge and I tried to charge and not charging.
What I should do now?Something has gone wrong. Turn your phone off, then force it into recovery mode:
Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new. In your case, select "new". -
I erase all content and settings in ipod. Now the iPod won't turn on. The Apple logo with black background is the only thing that appears.
put it into recovery mode
See here
http://www.apple.com/support/ipodtouch/assistant/restore/
Then restore
http://support.apple.com/kb/HT1414 -
my ipod touch wont turn on ive tried restoring it but every time i do it just says its waiting for the ipod to respond. meanwhile my ipod is no longer a black screen but the apple logo with a loading bar underneath that after leaving for 8 hours hasnt moved.
Try:
- Another cable
- Another USB port
- Reboot the computer
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My ipod touch is stuck up at Apple Logo, I have tried to update and restore through ITunes but no use, It stuck up again at Apple Logo with no Error, after restoring ITunes showes your ipod is restore but still apple logo won't go, Due to new Laptop, I do not have any backup, therefore i have tried to select new Ipod touch and goes through step by step procedure but no use, Please help what to do?
i tried reseting my ipod today and had a similar problem... it wont be recognized by itunes, the only thing i havent tried is putting it into DFU mode, or the state that it is in when u recieve it telling u to connect it to itunes.i recommend putting it into DFU mode. http://www.youtube.com/watch?v=34v8HMC9B98 this should better explain it. if i find another way, ill keep u updated
-
I used software update last night and my iMac didn't restart afterwards. I spun the little "dashed" wheel for a bit and then replaced the Apple Logo with a slashed circle symbol. I"ve tried several fixes without success and would like to know what my best approach might be.
I've tried to boot into single user mode but that failed the same as above. I've tried disk verify and repair permissions using Disk Utility, again without success in fixing the problem.com.apple.iokiast.IOUSBMassStorageClass
is a Apple kext file and likely necessary.
What you can do is backup your Users folders to another external drive (not TimeMachine) first so you have your files outside of TM. Disconnect this drive for safety reasons.
Then hold c and boot off the OS X 10.6 installer disk and simply reinstall OS X on top of the installed version, then use the 10.6.8 Combo Update here
http://support.apple.com/kb/DL1399
That should replace the troubled kext file with a fresh version.
This shouldn't bother your files or third party programs unless they have kext files or other "hooks" into OS X, if these programs fail, then just reinstall them from fresh sources and/or update to reinstall their missing parts.
Consider cloning your boot drive to a external HFS+ journaled formatted drive with Carbon Copy Cloner. -
my ipod toch 2g 3.1.3 is stuck on apple logo withe the shutdown ring after that i restore to the original settings and its not tern on plese if somone can halp my plzzzzzz
Did you already try to connect in recovery mode iPhone and iPod touch: Unable to restore or DFU mode Apple - Support - Discussions - DFU/Recovery mode
-
iPhone 4s will not boot after trying to install ios7 beta 4. Stops at apple logo with progress line under it. how can I reset it or get it back up to do a restore then try the iOS 7 beta 4 install again. Issue was probably caused by disconnection
Obviously since you have iOS 7 you're a developer. As a developer, you signed a NDA with Apple not to discuss the iOS on a public forum. Please log in to the Developer Forum using your credentials and ask for help there, lest you risk having your credentials terminated.
Thanks, and best of luck to you.
GDG -
I am trying to restore my iphone but it has been stuck at the apple logo with the progress bar and it shows no signs of loading at all. What should I do?
Hello kuukua.b,
Thanks for using Apple Support Communities.
Please try to restart and reset your iPhone by following the steps below, and then resume your restore process.
Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/ht1430
Take care,
Alex H.
Maybe you are looking for
-
Open file in excel from labview
I need a way to open an existing Excel file, that may or may not be open already. I am using the attached "Open Specific WorkBook.vi" from the examples. My LabVIEW program must be able to either open a specifc Excel workbook and worksheet even if i
-
when i send a PDF file to out side print, some of the things I aded dose not print. Is there a way I can "close" the PDF when i finish the work- so' every thing will be printed for sure
-
What is the best Videoing Chatting program to use for my Macbook Pro?
I have had Skype for a while now and recently I updated to Skype 5, and the call qaulity is absolutely miserable, it keeps being blurry and freezing and it's a pain to try and talk through. So I was wondering is there any changes or fixes I can do to
-
Trying to update the First Gen Ipod to the newest IOS if possible!
Hello Im trying to update two older verison's IPod First Gen. The one is verison... 4.2.1 (8C148) its a 8GB model number MCC086LL serial Number 1D034SRL75J I dont know if this information is needed but i put it up here anyway. The other one is veriso
-
Acrobat 10.0.2 consistently crashes when authenticating Adobe ID
My installation of Acrobat 10.0.2 consistently crashes when attempting to authenticate an Adobe ID using any of the functions for team collaboration. This has become extremely annoying. Does anyone have an idea what might be the culprit? This is part