I moved some Pics from CD-R to I-photo but before I finished it said my library memory was full. What do I need to do?
I moved some Pics from CD-R to I-photo but before I finished it said that my i-photo library memory was full. What do I need to do
try turning on the mirroring option and see if anything changes the following link will show you how to enable mirroring display setting
http://www.ehow.com/how_5661153_set-display-macbook-mirror.html
Similar Messages
-
How can I save some pics from my Mac onto my Ipod touch?
How can I save some pics from my Mac to my Ipod Touch ?
Syncing photos with iTunes is explained here: http://support.apple.com/kb/HT4236
You'll have to choose the photos you want to sync in the photo pane in iTunes with your phone connected, then apply sync. -
My imac 10.6.8 hangs on the spinning wheel after installing Samsung Kies (KiesMac_2-0-0-13023_10_1).
I was able to restart ok after installation; I even moved some files from my
Galaxy 3 to the imac.
But on the next (and all subsequent) restart attempts, it hangs on the spinning wheel.
How to fix? Thanx in advance.Mac OS X: Gray screen appears during startup
-
I moved some pictures from my photo stream to an album in iPhoto. The photo stream icon didn't disappear and I can't edit the picture .
Welcome to the Apple Community.
Moving photos from photostream to your library just imports them, it doesn't remove it from photostream, therefore photostream won't disappear.
Photos in photostream can't be edited, you can only edit photos that have been imported from photostream. -
I loaded some pics from my SD card and then I loaded some from my iPhone. But I am unable to see the pics from my SDcard in iPhotos.
I think it is 7.1.1 - there was another update today which I've uploaded but it didn't make any difference. It's just the music libary on the 5 that's causing me problems.
-
HT4858 How do I copy pics from camera roll to My Photo Stream
How do I copy pics from camera roll to My Photo Stream?
You cannot do that, but could create a "Shared Photo Stream" by going to your camera roll, pressing the button "select" then selecting some photos, then clicking on the little arrow in the lower left corner, and pressing the iCloud icon.
-
hey guyys .if some 1 from firefox team can help it wud be great......I was using firefox 3.6.3 on Mac OS 10.5.8 and Today I installed firefox 3.0(besides application folder) but not in same application folder like firefox 3.6.3 ...so now i had 2 firefox version 3.6.3 and 3.0....I had 3.6.3 already open ..i closed it to... open 3.0 ....when i opened 3.0 it asked me to import settings i said no....it opened well.....then i close 3.0 and tried to open 3.6.3 version ...now it was a problem everything got lost sessions, bookmarks, add ons, etc....it went back to default ....when i had 2 profiles in 3.6.3.....can any pls help me on dis 1...is there a way to restore my sessions, bookmarks and add ons ??? I have uninstalled 3.0 version now....??? pls pls pls ....help
== This happened ==
Just once or twice
== todayIt turns out that the problem had to do with network accounts, even though it was not clear at first. Redirecting the program to the local machine's cache with a network home redirector script fixed the issue. Thanks anyway.
-
I am trying to copy some songs from my playlist to a CD but it changes the order of the songs during the conversion. I want the songs in alphabetical by name but iTunes arranges them alphabetically by artist.
The apparent order of a burned CD may depend upon how you have iTunes display it - https://discussions.apple.com/message/17827921
iTunes 10 for Mac: Disc burning overview - http://support.apple.com/kb/PH1746
iTunes 10 for Mac: If you have trouble burning a CD - http://support.apple.com/kb/PH1751
iTunes 10 for Mac: Create your own MP3 CDs - http://support.apple.com/kb/PH1748
iTunes: How to set the play order of songs on an MP3 CD - http://support.apple.com/kb/HT2455 -
I need to save some pictures from iPhoto to a SDHC photo card for a digital frame and was wondering if there is a way to shrink or compress file size for each picture as I have already cropped the pictures? Thank you
Yes, you do this when you export the images from the Library.
File -> Export
in the Size section, you don't need images larger than the frame size, so you can specify that and in the Jpeg Quality you can select the amount of compression used.
This User Tip
https://discussions.apple.com/docs/DOC-4921
has details of the options in the Export dialogue. -
the recent OS update has deleted all my pics from an app called "my photos" is there any way to get these back?
If the system just Restarted on it's own, Shut down while you were working on something then started back up all those changes, edits, you had done in that app, document, are gone.
-
I have just connected my Ipad to my mac and went to upload all the pics from my mac onto my ipad but doing so it has overwrote everything on my ipad and therefore the pics on my ipad have gone!!!
Help - I have tried the restore but it didn't put back my photos it just started to sync the ones that had overwrote my old ones!!!I took the orginal photos on my iphone over the past couple of years and bit by bit i uploaded them onto my sony lap top in albums... Nothing to do with itunes...
A few months ago as my laptop didn't seem as reliable so i uploaded all the pics onto my ipad from my laptop, it was today where i thought i will upload more from my phone onto the mac then onto my ipad but insted it overwrote all the pics on my ipad.
I had tried to do the back up and it didnt work the photos were lost.
Then my ipad later today was driving me insane and wouldnt delete any of the pics so i just restrored it back to factory settings.
My laptop has had issues so i have in restored all that to.
I will now in the future just upload from my phone straight to my mac and not mess about wanting pics on my ipad.
I appricate your help but i am pretty sure i have lost all of my photos... My kids 1st day at school the lot... -
I have a macbook 13in mid 2010, im trying to update it from 10.6.4... i update it and restart i but when it finishes restarting, it says its still 10.6.4 and i need to update? please help!
Try downloaded the Mac OS X 10.6.8 Update Combo v1.1 standalone updater and installing it.
-
I get the message "Install Adobe Flash" can't be opened because it was not downloaded from the Mac App Store. This is the first time I have gotten the message. What do I need to do?
Hi Sandra,
you'll need to edit the security settings to install programs 'Mac App Store and identified developers'
Open the Systems Preference and go to Security & Privacy. There will be a section in the 'General' tab for 'Allow apps downloaded from:" The default selection is 'Mac App Store'. Change this setting to 'Mac App Store and identified developers".
This screenshot is taken on OS X 10.10 (Yosemite), so it may look slightly different if you're on a different OS X version.
Maria -
I'm trying to download a film from iTunes but an icon keeps coming up to say manage settings. What do I need to do so I can download the film?
In order for this to work you will need to connect to the computer that she syncs with normally, change her settings to manually manage her music, add back the music she wants then manually add the music from your computer.
-
Retrieving some pics From Vaults
Hello,
How can i retrieve some pictures (a whole project) from a vault? I have never used this so want to be careful the vault does not replace my current pictures not yet in the Vault. Can I selectively pic the projects to restore or is there a good way to retrieve pictures form the vaults that will avoid me doing other damage in the process?
Grateful for nay help with this.When you restore from the vault Aperture first makes a copy of your current library (as 'Library Name'_Old) and then reads in the vault library. The resulting library contains ONLY the images from the vault any images in the library that was active when you restored from the vault are not in this library, there's no merging or combing of libraries. But remember Aperture made a copy of the current library called 'Library Name_Old' so you didn't loose anything the original library is still there under the modified name.
My suggestion if you only wish to restore some pictures or a project or two would be to:
Create a new empty library.
Restore the vault into this library
Export the project(s) you want to add in
Switch to the library you want to put the project(s) into
Import the project(s)
Remember also only managed files are saved to the vault. If you had referenced files in the original library only the metadata and any adjustments you made to the files will be in the vault. You made need to reconnect the referenced files especially if they have moved.
Maybe you are looking for
-
Help with Security - please!
I have an applet whose codebase is http://www.our_site.com:7777/web_reports/graph/sExcelWriterApplet.jar that needs to do two things normally prohibited in Java: Run Excel (located at C:\Program Files\Microsoft Office\Office10\excel.exe) Store and re
-
How eo add default page in portal under home tab in portal
Hi All, I have to make one welcome page for my portal the reason behind is that when i log on to portal under Home role theare is no page assigned so blank view is available that looks very dull.. What i want to achive is that to createIview and assi
-
After installing ios6 on my ipad 2 I can't stream video on Netflix and it locks up my router
After installing ios 6 on my ipad 2 I can't stream video off Netflix and when I try to it locks up my router is there a fix for this?
-
When a folder in the library contains subfolders, and LR is set to show files in subfolders, when the parent folder is selected, and all pictures are exported, they all end directly in the export folder. It would be great to have an option to recreat
-
How do I enlarge the Print on my hp2540 printer,It prints very small