I need a appilcation for a "sorter"
I am trying to make a flash movie that has a bunch of
buttons. On the click of one of these buttons, the value of one of
four variables increased by a specific amount. At the end, the one
with the biggest value determines the object shown on the last
frame. It is basically is a sorter to see which Harry Potter house
you would be more likley to go to.
How would i write the code for this or make this
simpler?
I abandoned this project, But thanks. I have a new problem.
On a Mouse Advoider game, on one of the levels, i have a ball that
bounces around infinitavely (I made a movie clip with the ball
going left and right and inside that made a movie clip going up and
down. The final object inside the up down Movie clip is a button
which is also the ball. I want it so be that whenever the mouse
hovers over this ball, the game restarts. So, i put
on (rollOver) {
gotoAndStop(1);
But when i test it, the movie clip restarts. How would i fix
this?
Similar Messages
-
I am about to publish a book to the iBook store through iBooks Author. Would I need to apply for some sort of copyright? I have no experience so please correct me if I am wrong. Thank you
Copyright is an important legal issue and certainly complex. But in general, a good place to start is registering your book with the Library of Congress. You can do it by mail, and they will grant you a Library of Congress control number which you can place on your copyright page. This will register your book as your copyright and is well worth checking out.
Though, and I'm not sure, but you may have to have an ISBN so some cost is involved.
Hope this helps. -
There is Red Icon at the top bar and it says I have a virus and things keep popping up saying I have a virus and need to do a scan and pay for some sort of software to complete the scan, someone told me that this is a virus in. How do I get rid of it?
This could well be the notorious Mac Defender - which is an annoying program that tricks you into thinking that your Mac is infected with a virus, when the only infection is Mac Defender itself.
When surfing the web never EVER click on a link that says "Free anti-virus scan" or "Scan now" - they are nearly always scams which will end up infecting your computer. Although Macs are resistant to viruses, they're not resistant to user stupidity.
If you Google "Mac defender" then you'll find plenty of sites with instructions on how to remove this minor nuisance. Take this as a warning that you need to be more careful in your surfing habits.
Bob -
I have multiple computers set up on homesharing under one itunes account. Can I use face time on all of them or do i need seperate accounts for each?
I'd suggest you consider a cloud-based file sharing service such as Dropbox for this sort of use. iOS is not designed to be synched with more than one iTunes library at a time, so attempting to use it as you describe, connecting a single iPad to multiple computers, almost certainly won't work as you intend and is likely to cause nothing but headaches.
Regads. -
I moved from the UK to the US with my iMac. What do I need to buy for the UK iMac to work in the US? A power convertor? A plug convertor? or Both? I had previously read that you only need a plug convertor (three prong to two prong). But I'm terrified that my iMac will blow up if I only use a plug convertor and not some sort of voltage convertor (Transformer).
I'm not really hardware tech savy - is it easy to pop out the UK power cable and plug in the US power cable? Or do I need to get someone like an iMac support guy to do this? And because of the voltage difference, is there something built into the iMac that takes care of the voltage difference for me? Thanks!!
-
Need a code for Customer exit for extractor 0WBS_ELEMT_ATTR
Hi Guys,
I need a code for following requirement.
I have appended some fields to standard extractor 0WBS_ELEMT_ATTR which normally takes data from PRPS table. But the new fields will be getting data from PRTE and PROJ table. with common keys. Following is my code which is not working. Please help me out, I am not good in abap. Please note some lines are commented.
Thanks,
H
CODE:::::
form 0wbs_elemt_attr tables i_t_data structure biw_prps.
data: it_wbs_prps like biw_prps occurs 0.
data wa_prps like it_wbs_prps.
data: begin of it_wbs_prps occurs 0,
PSPNR like prps-pspnr,
POSID like prps-posid,
PBUKR like prps-PBUKR,
IZWEK like prps-IZWEK,
USR10 like prps-USR10,
USR00 like prps-USR00,
USR02 like prps-USR02,
OBJNR like prps-OBJNR,
end of it_wbs_prps.
data wa_prps like it_wbs_prps.
data: begin of it_wbs_prps1 occurs 0,
PSPNR like prps-pspnr,
POSID like prps-posid,
end of it_wbs_prps1.
data wa_prps1 like it_wbs_prps1.
data: begin of it_wbs_prte occurs 0,
posnr like prte-posnr,
PSTRT like prte-PSTRT,
PENDE like prte-PENDE,
ESTRT like prte-ESTRT,
EENDE like prte-EENDE,
ISTRT like prte-ISTRT,
IENDE like prte-IENDE,
end of it_wbs_prte.
data wa_prte like it_wbs_prte.
data: begin of it_wbs_proj occurs 0,
PSPNR like proj-pspnr,
PLFAZ like proj-plfaz,
PLSEZ like proj-plsez,
end of it_wbs_proj.
data wa_proj like it_wbs_proj.
refresh: it_wbs_prte, it_wbs_proj.
*it_wbs_jest.
if i_t_data[] is not initial.
Get data from PRPS WBS Master Data
select pspnr posid PBUKR IZWEK USR10 USR00 USR02 objnr
into corresponding fields of table it_wbs_prps
from prps
for all entries in i_t_data
where POSID = i_t_data-POSID.
sort it_wbs_prps by posid.
Get data from PRPS1 WBS Master Data
select pspnr posid
into corresponding fields of table it_wbs_prps1
from prps
for all entries in i_t_data
where POSID = i_t_data-POSID.
sort it_wbs_prps1 by posid.
Get data from PRTE Scheduling Data for Project Item
if it_wbs_prps1[] is not initial.
select posnr PSTRT PENDE ESTRT EENDE ISTRT IENDE
into corresponding fields of table it_wbs_prte
from prte
for all entries in it_wbs_prps1
where posnr = it_wbs_prps1-pspnr.
sort it_wbs_prte by posnr.
endif.
Get data from PROJ Project Master Data
if it_wbs_prps1[] is not initial.
select pspnr PLFAZ PLSEZ
into corresponding fields of table it_wbs_proj
from proj
for all entries in it_wbs_prps
where pspnr = it_wbs_proj-pspnr.
sort it_wbs_proj by pspnr.
endif.
loop at i_t_data.
clear: wa_prps1, wa_prte, wa_proj.
read table it_wbs_prps into wa_prps with key
posid = i_t_data-posid binary search.
read table it_wbs_prte into wa_prte with key
posnr = wa_prps1-pspnr.
read table it_wbs_proj into wa_proj with key
pspnr = it_wbs_proj-pspnr.
i_t_data-zzPBUKR = wa_prps-pbukr.
i_t_data-zzIZWEK = wa_prps-IZWEK.
i_t_data-zzUSR10 = wa_prps-USR10.
i_t_data-zzUSR00 = wa_prps-USR00.
i_t_data-zzUSR02 = wa_prps-USR02.
i_t_data-zzPSTRT = wa_prte-PSTRT.
i_t_data-zzPENDE = wa_prte-PENDE.
i_t_data-zzESTRT = wa_prte-ESTRT.
i_t_data-zzEENDE = wa_prte-EENDE.
i_t_data-zzISTRT = wa_prte-ISTRT.
i_t_data-zzIENDE = wa_prte-IENDE.
i_t_data-zzPLFAZ = wa_proj-PLFAZ.
i_t_data-zzPLSEZ = wa_proj-PLSEZ.
modify i_t_data.
endloop.
endif.
endform. " 0wbs_elemt_attrHi,
it_wbs_prps1 .
If you are going to use this internal table to check for a null condition, shouldn't you first assign the data package to it?
For example, it_wbs_prps1 = i_t_data[].
Because you are now using it_wbs_prps1 to select data from a table and it doesn't have any data.
Please check.
-RMP
Edit : Please ignore this. I didn't see that you are actually filling the internal table. Sorry!
Edited by: RMP on Oct 18, 2010 12:16 PM -
I go into a wiki created by my employer, and get the bar at top of page almost immediately telling me there are plugins needed. I click the button offered for finding plugins, and almost immediately am told no suitable plugins are found. Plugin help offered is useless, because I have no idea what plugins I need to look for. How can I find out what plugins are being detected as "missing"?
If there is no LR edits to keep, or if you don't want to keep the existing edits, you could delete the files from LR and import them again.
Since the file names on disk and file names in LR don't match, you will need to manually match them up by hand individually, if you want to keep the existing LR edits.
The easiest approach to this -- without doing any script programming -- is to go into each directory, one at a time:
Select the correct folder in the "folders" pane. Right-click "show parent" as necessary to see the directory tree.
Sort the LR Library by creation date.
Using the details view in File Explorer, sort the files by creation date (add to the viewed columns if necessary).
Assuming no more than 1 image per second, the files should line up. -
Need HDV encoding for backup and encoding in windows.
Need HDV codex for PC. rather than caputre back to tape then onto my PC with ASpect HD.
I would like to encode a project and store it on my pc with little to no loss in quailty. Is there any type of codex that will keep te HDV quailty but plays and encodes with WINDOW MEDIA ENCODER? and what are the settings?
I have done this with DV footage by going to export - Useing quicktime conversion: settings avi -Options - DVCPro. I can't seem to do them same useing HDV. I think the new FC6 can do this. but how?
thnaks for your help
Message was edited by: skatesurferdudeYou would need a utility that will encode to your desired format (AVI?). Such utilities would be Sorenson Squeeze, Autodesk Cleaner and Compression Master. Copy it to the Windows system after encoding. And yes, it will take a very long time unless you have a node cluster (render farm) of some sort so you are probably better off sending it back to tape and capturing it natively on the PC if you are wanting to work on the footage there. If you are just wanting to play the video on the PC then encode it.
-
Need Menu Exit for T-Code ME32K in ECC
Hello,
I need Menu Exit for Transaction ME32K in ECC version, It would be helpful if any one could tell me,
Deserving answer will be rewarded points
Regards
Rajeshhi
use this program to search for the BADIS and enhancements
& Report ZPJA_PM002 (V2) &
& Text Elements: &
& P_DEVC Show user-exits from development class &
& P_LIMIT Limit submit program selection &
& P_FUNC Show function modules &
& P_SUBM Show submit programs &
& S01 Selection data (TCode takes precedence over program name) &
report zpja_pm002
no standard page heading
line-size 158.
*tables: enlfdir. "Additional Attributes for Function Modules
data: tabix like sy-tabix,
w_linnum type i,
w_off type i,
w_index like sy-tabix,
w_include like trdir-name,
w_prog like trdir-name,
w_incl like trdir-name,
w_area like rs38l-area,
w_level,
w_str(50) type c,
w_funcname like tfdir-funcname.
constants: c_fmod(40) type c value 'Function modules selected: ',
c_subm(40) type c value 'Submit programs selected: ',
c_col1(12) type c value 'Enhanmt Type',
c_col2(40) type c value 'Enhancement',
c_col3(30) type c value 'Program/Include',
c_col4(20) type c value 'Enhancement Name',
c_col5(40) type c value 'Enhancement Description'.
Work Areas: ABAP Workbench
data: begin of wa_d010inc.
data: master type d010inc-master.
data: end of wa_d010inc.
data: begin of wa_tfdir.
data: funcname type tfdir-funcname,
pname type tfdir-pname,
include type tfdir-include.
data: end of wa_tfdir.
data: begin of wa_tadir.
data: devclass type tadir-devclass.
data: end of wa_tadir.
data: begin of wa_tstc.
data: pgmna type tstc-pgmna.
data: end of wa_tstc.
data: begin of wa_tstcp.
data: param type tstcp-param.
data: end of wa_tstcp.
data: begin of wa_enlfdir.
data: area type enlfdir-area.
data: end of wa_enlfdir.
Work Areas: BADIs
data: begin of wa_sxs_attr.
data: exit_name type sxs_attr-exit_name.
data: end of wa_sxs_attr.
data: begin of wa_sxs_attrt.
data: text type sxs_attrt-text.
data: end of wa_sxs_attrt.
Work Areas: Enhancements
data: begin of wa_modsap.
data: member type modsap-member.
data: end of wa_modsap.
data: begin of wa_modsapa.
data: name type modsapa-name.
data: end of wa_modsapa.
data: begin of wa_modsapt.
data: modtext type modsapt-modtext.
data: end of wa_modsapt.
Work Areas: Business Transaction Events
data: begin of wa_tbe01t.
data: text1 type tbe01t-text1.
data: end of wa_tbe01t.
data: begin of wa_tps01t.
data: text1 type tps01t-text1.
data: end of wa_tps01t.
user-exits
types: begin of t_userexit,
type(12) type c,
pname like trdir-name,
txt(300),
level type c,
modname(30) type c,
modtext(40) type c,
end of t_userexit.
data: i_userexit type standard table of t_userexit with header line.
Function module developmnet classes
types: begin of t_devclass,
clas like trdir-clas,
end of t_devclass.
data: i_devclass type standard table of t_devclass with header line.
Submit programs
types: begin of t_submit,
pname like trdir-name,
level,
done,
end of t_submit.
data: i_submit type standard table of t_submit with header line.
Source code
types: begin of t_sourcetab, "#EC * (SLIN lügt!)
line(200), "#EC * (SLIN lügt!)
end of t_sourcetab. "#EC * (SLIN lügt!)
data: sourcetab type standard table of t_sourcetab with header line.
data c_overflow(30000) type c.
Description of an ABAP/4 source analysis token
data: i_stoken type standard table of stokex with header line.
data wa_stoken like i_stoken.
Description of an ABAP/4 source analysis statement
data: i_sstmnt type standard table of sstmnt with header line."#EC
keywords for searching ABAP code
types: begin of t_keywords,
word(30),
end of t_keywords.
data: keywords type standard table of t_keywords with header line.
function modules within program
types: begin of t_fmodule,
name like rs38l-name,
pname like trdir-name,
pname2 like trdir-name,
level,
bapi,
done,
end of t_fmodule.
data: i_fmodule type standard table of t_fmodule with header line.
& Selection Options &
selection-screen begin of block selscr1 with frame title text-s01.
parameter: p_pname like trdir-name memory id rid,
p_tcode like syst-tcode,
p_limit(4) type n default 100,
p_devc like rihea-dy_ofn default ' ',
p_func like rihea-dy_ofn default ' ',
p_subm like rihea-dy_ofn default ' '.
selection-screen end of block selscr1.
& START-OF-SELECTION &
start-of-selection.
if p_pname is initial and p_tcode is initial.
message e008(hrfpm). "Make entry on the selection screen
stop.
endif.
ensure P_LIMIT is not zero.
if p_limit = 0.
p_limit = 1.
endif.
perform data_select.
perform get_submit_data.
perform get_fm_data.
perform get_additional_data.
perform data_display.
& Form DATA_SELECT &
form data_select.
data selection message to sap gui
call function 'SAPGUI_PROGRESS_INDICATOR'
destination 'SAPGUI'
keeping logical unit of work
exporting
text = 'Get programs/includes' "#EC NOTEXT
exceptions
system_failure
communication_failure
. "#EC *
determine search words
keywords-word = 'CALL'.
append keywords.
keywords-word = 'FORM'.
append keywords.
keywords-word = 'PERFORM'.
append keywords.
keywords-word = 'SUBMIT'.
append keywords.
keywords-word = 'INCLUDE'.
append keywords.
if not p_tcode is initial.
get program name from TCode
select single pgmna from tstc into wa_tstc-pgmna
where tcode eq p_tcode.
if not wa_tstc-pgmna is initial.
p_pname = wa_tstc-pgmna.
TCode does not include program name, but does have refereve TCode
else.
select single param from tstcp into wa_tstcp-param
where tcode eq p_tcode.
if sy-subrc = 0.
check wa_tstcp-param(1) = '/'.
check wa_tstcp-param+1(1) = '*'.
if wa_tstcp-param ca ' '.
endif.
w_off = sy-fdpos + 1.
subtract 2 from sy-fdpos.
if sy-fdpos gt 0.
p_tcode = wa_tstcp-param+2(sy-fdpos).
endif.
select single pgmna from tstc into wa_tstc-pgmna
where tcode eq p_tcode.
p_pname = wa_tstc-pgmna.
if sy-subrc <> 0.
message e110(/saptrx/asc) with 'No program found for: '
p_tcode."#EC NOTEXT
stop.
endif.
else.
message e110(/saptrx/asc) with 'No program found for: ' p_tcode.
"#EC NOTEXT
stop.
endif.
endif.
endif.
Call customer-function aus Program coding
read report p_pname into sourcetab.
if sy-subrc > 0.
message e017(enhancement) with p_pname raising no_program."#EC *
endif.
scan abap-source sourcetab tokens into i_stoken
statements into i_sstmnt
keywords from keywords
overflow into c_overflow
with includes.
WITH ANALYSIS.
if sy-subrc > 0. "keine/syntakt. falsche Ablauflog./Fehler im Skanner
message e130(enhancement) raising syntax_error. "#EC *
endif.
check I_STOKEN for entries
clear w_linnum.
describe table i_stoken lines w_linnum.
if w_linnum gt 0.
w_level = '0'.
w_prog = ''.
w_incl = ''.
perform data_search tables i_stoken using w_level w_prog w_incl.
endif.
endform. "DATA_SELECT
& Form GET_FM_DATA &
form get_fm_data.
data selection message to sap gui
call function 'SAPGUI_PROGRESS_INDICATOR'
destination 'SAPGUI'
keeping logical unit of work
exporting
text = 'Get function module data' "#EC NOTEXT
exceptions
system_failure
communication_failure
. "#EC *
Function module data
sort i_fmodule by name.
delete adjacent duplicates from i_fmodule comparing name.
loop at i_fmodule where done ne 'X'.
clear: i_stoken, i_sstmnt, sourcetab, wa_tfdir, w_include .
refresh: i_stoken, i_sstmnt, sourcetab.
clear wa_tfdir.
select single funcname pname include from tfdir into wa_tfdir
where funcname = i_fmodule-name.
check sy-subrc = 0.
call function 'FUNCTION_INCLUDE_SPLIT'
exporting
program = wa_tfdir-pname
importing
group = w_area.
concatenate 'L' w_area 'U' wa_tfdir-include into w_include.
i_fmodule-pname = w_include.
i_fmodule-pname2 = wa_tfdir-pname.
modify i_fmodule.
read report i_fmodule-pname into sourcetab.
if sy-subrc = 0.
scan abap-source sourcetab tokens into i_stoken
statements into i_sstmnt
keywords from keywords
with includes.
if sy-subrc > 0.
message e130(enhancement) raising syntax_error.
endif.
check i_stoken for entries
clear w_linnum.
describe table i_stoken lines w_linnum.
if w_linnum gt 0.
w_level = '1'.
w_prog = i_fmodule-pname2.
w_incl = i_fmodule-pname.
perform data_search tables i_stoken using w_level w_prog w_incl.
endif.
endif.
endloop.
if p_devc = 'X'.
loop at i_fmodule.
clear: wa_tadir, wa_enlfdir.
select single area from enlfdir into wa_enlfdir-area
where funcname = i_fmodule-name.
check not wa_enlfdir-area is initial.
select single devclass into wa_tadir-devclass
from tadir where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name = wa_enlfdir-area.
check not wa_tadir-devclass is initial.
move wa_tadir-devclass to i_devclass-clas.
append i_devclass.
i_fmodule-done = 'X'.
modify i_fmodule.
endloop.
sort i_devclass.
delete adjacent duplicates from i_devclass.
endif.
endform. "GET_FM_DATA
& Form GET_SUBMIT_DATA &
form get_submit_data.
data selection message to sap gui
call function 'SAPGUI_PROGRESS_INDICATOR'
destination 'SAPGUI'
keeping logical unit of work
exporting
text = 'Get submit data' "#EC NOTEXT
exceptions
system_failure
communication_failure
. "#EC *
sort i_submit.
delete adjacent duplicates from i_submit comparing pname.
w_level = '0'.
loop at i_submit where done ne 'X'.
clear: i_stoken, i_sstmnt, sourcetab.
refresh: i_stoken, i_sstmnt, sourcetab.
read report i_submit-pname into sourcetab.
if sy-subrc = 0.
scan abap-source sourcetab tokens into i_stoken
statements into i_sstmnt
keywords from keywords
with includes.
if sy-subrc > 0.
message e130(enhancement) raising syntax_error.
continue.
endif.
check i_stoken for entries
clear w_linnum.
describe table i_stoken lines w_linnum.
if w_linnum gt 0.
w_prog = i_submit-pname.
w_incl = ''.
perform data_search tables i_stoken using w_level w_prog w_incl.
endif.
endif.
restrict number of submit program selected for processing
describe table i_submit lines w_linnum.
if w_linnum ge p_limit.
w_level = '1'.
endif.
i_submit-done = 'X'.
modify i_submit.
endloop.
endform. "GET_SUBMIT_DATA
& Form DATA_SEARCH &
form data_search tables p_stoken structure stoken
using p_level p_prog p_incl.
loop at p_stoken.
clear i_userexit.
tabix = sy-tabix + 1.
i_userexit-level = p_level.
if i_userexit-level = '0'.
if p_incl is initial.
i_userexit-pname = p_pname.
else.
concatenate p_pname '/' p_incl into i_userexit-pname.
endif.
else.
if p_incl is initial.
i_userexit-pname = p_prog.
else.
concatenate p_prog '/' p_incl into i_userexit-pname.
endif.
endif.
Include
if p_stoken-str eq 'INCLUDE'.
check p_level eq '0'. " do not perform for function modules
*(2nd pass)
w_index = sy-tabix + 1.
read table p_stoken index w_index into wa_stoken.
check not wa_stoken-str cs 'STRUCTURE'.
check not wa_stoken-str cs 'SYMBOL'.
read table i_submit with key pname = wa_stoken-str.
if sy-subrc <> 0.
i_submit-pname = wa_stoken-str.
i_submit-level = p_level.
append i_submit.
endif.
endif.
Enhancements
if p_stoken-str eq 'CUSTOMER-FUNCTION'.
clear w_funcname.
read table p_stoken index tabix.
translate p_stoken-str using ''' '.
condense p_stoken-str.
if p_prog is initial.
concatenate 'EXIT' p_pname p_stoken-str into w_funcname
separated by '_'.
else.
concatenate 'EXIT' p_prog p_stoken-str into w_funcname
separated by '_'.
endif.
select single member from modsap into wa_modsap-member
where member = w_funcname.
if sy-subrc = 0. " check for valid enhancement
i_userexit-type = 'Enhancement'.
i_userexit-txt = w_funcname.
append i_userexit.
else.
clear wa_d010inc.
select single master into wa_d010inc-master
from d010inc
where include = p_prog.
concatenate 'EXIT' wa_d010inc-master p_stoken-str into
w_funcname
separated by '_'.
i_userexit-type = 'Enhancement'.
i_userexit-txt = w_funcname.
endif.
endif.
BADIs
if p_stoken-str cs 'cl_exithandler='.
w_index = sy-tabix + 4.
read table p_stoken index w_index into wa_stoken.
i_userexit-txt = wa_stoken-str.
replace all occurrences of '''' in i_userexit-txt with space.
i_userexit-type = 'BADI'.
append i_userexit.
endif.
Business transaction events
if p_stoken-str cs 'OPEN_FI_PERFORM'.
i_userexit-type = 'BusTrEvent'.
i_userexit-txt = p_stoken-str.
replace all occurrences of '''' in i_userexit-txt with space.
i_userexit-modname = i_userexit-txt+16(8).
case i_userexit-txt+25(1).
when 'E'.
clear wa_tbe01t.
select single text1 into wa_tbe01t-text1 from tbe01t
where event = i_userexit-txt+16(8)
and spras = sy-langu.
if wa_tbe01t-text1 is initial.
i_userexit-modtext = ''. "#EC NOTEXT
else.
i_userexit-modtext = wa_tbe01t-text1.
endif.
i_userexit-modname+8 = '/P&S'. "#EC NOTEXT
when 'P'.
clear wa_tps01t.
select single text1 into wa_tps01t-text1 from tps01t
where procs = i_userexit-txt+16(8)
and spras = sy-langu.
i_userexit-modtext = wa_tps01t-text1.
i_userexit-modname+8 = '/Process'.
endcase.
append i_userexit.
endif.
Program exits
if p_stoken-str cs 'USEREXIT_'.
i_userexit-type = 'Program Exit'.
i_userexit-txt = p_stoken-str.
replace all occurrences of '''' in i_userexit-txt with space.
append i_userexit.
endif.
Submit programs
if p_stoken-str cs 'SUBMIT'.
check p_level eq '0'. " do not perform for function modules
*(2nd pass)
check not p_stoken-str cs '_'. " ensure not SUBMIT_XXX
w_index = sy-tabix + 1.
read table p_stoken index w_index into wa_stoken.
check not wa_stoken-str cs '_'. " ensure not SUBMIT_XXX
replace all occurrences of '''' in wa_stoken-str with space.
read table i_submit with key pname = wa_stoken-str.
if sy-subrc <> 0.
i_submit-pname = wa_stoken-str.
i_submit-level = p_level.
append i_submit.
endif.
endif.
Perform routines (which reference external programs)
if p_stoken-str cs 'PERFORM'.
check p_level eq '0'. " do not perform for function modules
*(2nd pass)
w_index = sy-tabix + 1.
read table p_stoken index w_index into wa_stoken.
if not wa_stoken-ovfl is initial.
w_off = wa_stoken-off1 + 10.
w_str = c_overflow+w_off(30).
find ')' in w_str match offset w_off.
w_off = w_off + 1.
wa_stoken-str = w_str(w_off).
endif.
check wa_stoken-str cs '('.
w_off = 0.
while sy-subrc = 0.
if wa_stoken-str+w_off(1) eq '('.
replace section offset w_off length 1 of wa_stoken-str with ''
replace all occurrences of ')' in wa_stoken-str with space.
read table i_submit with key pname = wa_stoken-str.
if sy-subrc <> 0.
i_submit-pname = wa_stoken-str.
append i_submit.
endif.
exit.
else.
replace section offset w_off length 1 of wa_stoken-str with ''
shift wa_stoken-str left deleting leading space.
endif.
endwhile.
endif.
Function modules
if p_stoken-str cs 'FUNCTION'.
clear i_fmodule.
check p_level eq '0'. " do not perform for function modules
*(2nd pass)
w_index = sy-tabix + 1.
read table p_stoken index w_index into wa_stoken.
if wa_stoken-str cs 'WF_'.
if wa_stoken-str cs 'IF_'.
break-point.
endif.
if wa_stoken-str cs 'BAPI'.
i_fmodule-bapi = 'X'.
endif.
replace first occurrence of '''' in wa_stoken-str with space.
replace first occurrence of '''' in wa_stoken-str with space.
if sy-subrc = 4. " didn't find 2nd quote (ie name truncated)
clear wa_tfdir.
concatenate wa_stoken-str '%' into wa_stoken-str.
select single funcname into wa_tfdir-funcname from tfdir
where funcname like wa_stoken-str.
if sy-subrc = 0.
i_fmodule-name = wa_tfdir-funcname.
else.
continue.
endif.
else.
i_fmodule-name = wa_stoken-str.
endif.
i_fmodule-level = p_level.
append i_fmodule.
endif.
endloop.
endform. "DATA_SEARCH
& Form GET_ADDITIONAL_DATA &
form get_additional_data.
data selection message to sap gui
call function 'SAPGUI_PROGRESS_INDICATOR'
destination 'SAPGUI'
keeping logical unit of work
exporting
text = 'Get additional data' "#EC NOTEXT
exceptions
system_failure
communication_failure
. "#EC *
loop at i_userexit.
Enhancement data
if i_userexit-type cs 'Enh'.
clear: wa_modsapa.
select single name into wa_modsapa-name from modsap
where member = i_userexit-txt.
check sy-subrc = 0.
i_userexit-modname = wa_modsapa-name.
clear wa_modsapt.
select single modtext into wa_modsapt-modtext from modsapt
where name = wa_modsapa-name
and sprsl = sy-langu.
i_userexit-modtext = wa_modsapt-modtext.
endif.
BADI data
if i_userexit-type eq 'BADI'.
clear wa_sxs_attr.
select single exit_name into wa_sxs_attr-exit_name from sxs_attr
where exit_name = i_userexit-txt.
if sy-subrc = 0.
i_userexit-modname = i_userexit-txt.
else.
i_userexit-modname = 'Dynamic call'. "#EC NOTEXT
endif.
clear wa_sxs_attrt.
select single text into wa_sxs_attrt-text from sxs_attrt
where exit_name =
wa_sxs_attr-exit_name
and sprsl = sy-langu.
i_userexit-modtext = wa_sxs_attrt-text.
endif.
modify i_userexit.
endloop.
get enhancements via program package
clear wa_tadir.
select single devclass into wa_tadir-devclass from tadir
where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = p_pname.
if sy-subrc = 0.
clear: wa_modsapa, wa_modsapt.
select name from modsapa into wa_modsapa-name
where devclass = wa_tadir-devclass.
select single modtext from modsapt into wa_modsapt-modtext
where name = wa_modsapa-name
and sprsl = sy-langu.
read table i_userexit with key modname = wa_modsapa-name.
if sy-subrc <> 0.
i_userexit-modtext = wa_modsapt-modtext.
i_userexit-type = 'Enhancement'. "#EC NOTEXT
i_userexit-modname = wa_modsapa-name.
i_userexit-txt = 'Determined from program DevClass'."#EC NOTEXT
i_userexit-pname = 'Unknown'. "#EC NOTEXT
append i_userexit.
endif.
endselect.
endif.
endform. "GET_ADDITIONAL_DATA
& Form DATA_DISPLAY &
form data_display.
data selection message to sap gui
call function 'SAPGUI_PROGRESS_INDICATOR'
destination 'SAPGUI'
keeping logical unit of work
exporting
text = 'Prepare screen for display' "#EC NOTEXT
exceptions
system_failure
communication_failure
. "#EC *
sort i_userexit by type txt modname.
delete adjacent duplicates from i_userexit comparing txt modname.
format headings
write: 'Enhancements from main program'. "#EC NOTEXT
write: /.
uline.
format color col_heading.
write: / sy-vline,
(12) c_col1, "Enhanmt Type
sy-vline,
(40) c_col2, "Enhancement
sy-vline,
(30) c_col3, "Program/Include
sy-vline,
(20) c_col4, "Enhancement name
sy-vline,
(40) c_col5, "Enhancement description
sy-vline.
format reset.
uline.
format lines
loop at i_userexit.
set line colour
case i_userexit-type.
when 'Enhancement'.
format color 3 intensified off.
when 'BADI'.
format color 4 intensified off.
when 'BusTrEvent'.
format color 5 intensified off.
when 'Program Exit'.
format color 6 intensified off.
when others.
format reset.
endcase.
write: / sy-vline,
i_userexit-type,
sy-vline,
i_userexit-txt(40),
sy-vline,
i_userexit-pname(30),
sy-vline,
i_userexit-modname(20),
sy-vline,
i_userexit-modtext(40),
sy-vline.
endloop.
format reset.
uline.
user-exits from development class of function modules
if p_devc = 'X'.
write: /.
write: / 'User-exits from function module development class'."#EC
*NOTEXT
write: 157''.
uline (90).
write: 157''.
loop at i_devclass.
clear wa_modsapa.
select name from modsapa into wa_modsapa
where devclass = i_devclass-clas.
select single name modtext into corresponding fields of wa_modsapt
from modsapt
where name = wa_modsapa-name
and sprsl = sy-langu.
format color 3 intensified off.
write: / sy-vline,
(12) 'Enhancement',
sy-vline,
wa_modsapa-name,
sy-vline,
wa_modsapt-modtext,
sy-vline.
endselect.
endloop.
uline (90).
format reset.
endif.
describe table i_fmodule lines w_linnum.
write: / c_fmod , at 35 w_linnum. "#EC NOTEXT
write: 157''.
if p_func = 'X'.
display fuction modules used in program
uline (38).
write: 157''.
loop at i_fmodule.
write: sy-vline,
i_fmodule-name,
sy-vline,
i_fmodule-bapi,
sy-vline.
write: 157''.
endloop.
uline (38).
endif.
describe table i_submit lines w_linnum.
write: / c_subm , at 35 w_linnum. "#EC NOTEXT
write: 157''.
if p_subm = 'X'.
display submit programs used in program
uline (44).
write: 157''.
loop at i_submit.
write: sy-vline,
i_submit-pname,
sy-vline.
write: 157''.
endloop.
uline (44).
endif.
issue message with number of user-exits displayed
describe table i_userexit lines w_linnum.
message s697(56) with w_linnum.
endform. "DATA_DISPLAY
reward points if it helps
gunjan -
Why does Merge Join needs its sources to be sorted
Hi,
Can anyone explain why Merge Join needs its sources to be sorted ?
I saw an explanation in another thread that this is the way to not load all the data to memory, but isnt the data that is about to be merged already all in memory becuase the SORT component waits for all the rows to arrive ?
Why are there no options for Full cache, Partial Cache and No Cache like in the Lookup component ?MERGE Join is one of Join algorithms in SQL Server needs sorted inputs and efficient for large set of records.
You may refer the below(Craig
Freedman) link to understand the MERGE JOIN algorithm in details.
http://blogs.msdn.com/b/craigfr/archive/2006/08/03/merge-join.aspx
http://technet.microsoft.com/en-us/library/ms137653.aspx
Nope
This is SSIS forum and I guess poster is asking about MERGE JOIN transformation in SSIS
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs -
Large RAC cluster advice needed - 16 nodes for 120,000 TPS?
So we are doing some modeling on a system that we are getting ready to build. Our current estimate indicates we will need to plan for about 120K transactions per second. Another guy did the research and thinks we need to plan to have 16 nodes of IBM 3850s which will be 256 cores and about 256gigs of ram to support the TPS. This sounded a little over the top so I decided to do some of my own research and I found:
http://www.oracle.com/us/corporate/press/018144
And that indicates a HP with two Intel® Xeon® x5570 quad-core 2.93 GHz processors was able to do 10,529 TPS. This makes me feel like the hardware that was suggested (sixteen x3850s) is way overkill.
Does anyone have any ideas or whitepapers on this sort of planning?
Edited by: bolesj on May 7, 2009 10:42 AMHi,
Did u thought about using database machine (Oracle/Hp)?
http://www.oracleracsig.org/pls/apex/f?p=105:206:3383923510465954::NO
Or take o brief look on webseminar presented by Bohan Chen (Yahoo). He uses a RAC system with 16 nodes.
http://www.oracleracsig.org/pls/apex/f?p=105:206:3383923510465954::NO
Regards,
Rodrigo Mufalani
http://mufalani.blogspot.com -
Need Printer driver for F4240 on Vista
I've been using this printer for years with no trouble. All of a sudden, it stopped working. My system said it needed a driver. For the life of me, I cannot find one. The installation disk that came with the printer does no good. None of the HP assisting utilities does any good for locating a driver. Can somebody PLEASE help me? I don't have time to investigate, purchase, and install another printer. I need a driver for the F4240 now. Thank you in advance for any help you can offer.
Hello , and welcome to the HP Forums! I see you're having issues regarding your drivers. I would like to help! Do you have any issues making a copy? I'd recommend starting with a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would also recommend downloading and running the HP Print and Scan Doctor. Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums! -
I need a preloader for my website
Hi Experts.
Can someone point me to good tutorials and/or instruction videos that solve the following problem?
I am building a website that will have many images and several movies created in my CAD software as ".avi" files, then re-saved as Quicktime ".mov" files. The largest movie is 60.8KB. They will be located on more than one page on the site.
Here's a link to the site in progress: http://www.integra-living.com/rht
I need a preloader that runs automatically as my site splash page opens, and loads all that stuff while displaying a progress indicator of some sort.
I also need tips on whether the best strategy is to use CSS, Action Script, or some other coding that will work for most browsers and does not subvert optimization or do other mysterious bad things.
Thanks very much for any help.
Richard TalbottUnless I'm misunderstanding what you're trying to do, you don't need a preloaded for embed movies. The page will load without any delay. It's not until the user chooses to play a movie will it begin downloading / streaming it from the server. Even if the video is a large file, internet users are use to this type of scenario where they choose to play a movie, ala youtube and others, that if their connections are slow there may be delays in video playback. With all that said, I have seen and used page loaders where visitors will be expecting to wait a while for a result to happen, I just don't think this scenario warrants it.
-
I need an arrow or some sort of icon that points and moves to alert the website user to scroll down. Are there such widgets or is there a method to make an image move on its own. Also, how to get my muse webpage to automatically scroll down?
Thank you for your help, but I believe my questions remains unanswered -- mainly, because my English isn't the good.
Here's what I am asking:
1. I need something that is animated that blinks or flashes to alert the viewer to scroll down the page. I would put the wording: Scroll Down for more (and then an arrow blinks or gently moves up and down to alert the user to move down).
2. is there a way that the entire homepage on it's own moves downward?
Sorry for my poor English.
From: The Arthematics <[email protected]>
To: preston reed <[email protected]>
Sent: Tuesday, February 24, 2015 9:42 PM
Subject: I need an arrow or some sort of icon that points and moves to alert the website user to scroll down. Are there such widgets or is there a method to make an image move on its own. Also, how to get my muse webpage to automatically scroll down?
I need an arrow or some sort of icon that points and moves to alert the website user to scroll down. Are there such widgets or is there a method to make an image move on its own. Also, how to get my muse webpage to automatically scroll down?
created by The Arthematics in Help with using Adobe Muse CC - View the full discussionIf I understood correctly. You can place arrows on each section of the page and use "fade-in" and "fade-out". And maybe you want this widget Anchor + – Adobe Muse Widget Directory to automatically scroll down. If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7227429#7227429 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7227429#7227429 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Help with using Adobe Muse CC by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624. -
Adaptiv Computing Controller / do i need NFS Mounts for Application Server?
Hello,
i got a question about the Adaptiv Computing Controller.
Do i need NFS Mounts for the Application servers?
Or can i handle this from the SAN too?
Can anybody help me here?
Thankshttp://ww2.cs.fsu.edu/~rosentha/linux/2.6.26.5/docs/DocBook/libata/ch07.html#excatATAbusErr wrote:
ATA bus error means that data corruption occurred during transmission over ATA bus (SATA or PATA). This type of errors can be indicated by
ICRC or ABRT error as described in the section called “ATA/ATAPI device error (non-NCQ / non-CHECK CONDITION)”.
Controller-specific error completion with error information indicating transmission error.
On some controllers, command timeout. In this case, there may be a mechanism to determine that the timeout is due to transmission error.
Unknown/random errors, timeouts and all sorts of weirdities.
As described above, transmission errors can cause wide variety of symptoms ranging from device ICRC error to random device lockup, and, for many cases, there is no way to tell if an error condition is due to transmission error or not; therefore, it's necessary to employ some kind of heuristic when dealing with errors and timeouts. For example, encountering repetitive ABRT errors for known supported command is likely to indicate ATA bus error.
Once it's determined that ATA bus errors have possibly occurred, lowering ATA bus transmission speed is one of actions which may alleviate the problem.
I'd also add; make sure you have good backups when ATA errors are frequent
Maybe you are looking for
-
Problem with installation of Adobe Air 2.6
Hi, I've got a problem with installation of Adobe Air 2.6 under Mageia 2 Linux. The installation stops with an error. Here's the install.log: [Adobe AIR Application Installer:8550][ERR] Application Installer end with exit code 7 [setup:11894][INFO] R
-
Grey bar on top of page onYouTube ios safari.
Ok, so suddenly I have a big ugly grey bar on top of the page when I try to look at youtube on safari on the ipad. The grey bar is displaying the YouTube app icon, with a button to open the app ( because I have the app installed, I imagine it would s
-
Password protecting a swf: effective or not?
hi. I've created a password variable w/input text on the first frame of a swf to enable private viewing of a swf; so if you dont know the password you cant procedd to frame 2, to see the whole thing. Is this effective?
-
MAC & PC Video conversion MOV to AVI error
Hello i have a big problem and hope someone can help me: I have to convert around 16 (1h) clips from .mov to avi. Im currently working on a mac but my client only uses pc and he had problems with .mov files. thats why im tryng to reconvert to .avi wh
-
Hello, what do I have to do to resolve the unknown error message (-42032) ?
Hello, When I open iTunes, I have a pop-up saying "Unknown error happen (-42032). Do someone know how I can resolve this incident ? Do I have to re-instal iTunes Many thanks in advance for your answer. Philippe