I need an app or software that records the date/time each time a write something and press enter. This needs to be quick so I can continue writing right after I press enter, and the date/time is inserted for each word. Does this sort of software exist?
I need an app or software that records the date/time each time a write something and press enter. This needs to be quick so I can continue writing right after I press enter, and the date/time is inserted for each word. Imagine a spreadsheet - each time a write something in a cell and press enter to go into the next cell, I need the app/software to automatically insert the corresponding dat and time. Does this sort of software exist?
No one here is going to do anything about it. Send feedback to Apple.
http://www.apple.com/feedback/ipad.html
Basic troubleshooting steps.
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Similar Messages
-
every time i go to write something it stops, the circle goes round and then it starts writing, does my mac need servicing or what is going on
What model of iMac do you have?
How much memory is installed?
What version of Mac OS X are you running?
When did the issue start occurring?
Did you recently install any software updates or new software that coincide with the onset of the issue?
Your post contains very little information to work with, but here's what I would do if it were my system.
First check the status of your hard driveby launching the Disk Utility application that is located in the Applications/Utilities folder. Click on the Verify Disk option and observe whether it reports any major errors. You can also boot from the Install DVD that came with your system by holding down the 'c' key and then pulling down the Utilities menu bar item to select Disk Utility. Either way will work. If the disk checks out OK then click on the Repair Permissions option.
To get a more detailed picture of the SMART status (hard drive error logging) you can use an application like SMART Utility which can be downloaded here. Obviously downloading a new application could be a problem if you're system is 'hanging' whenever you try to write something, so this may not be an option.
http://www.volitans-software.com/smart_utility.php
If you find any significant errors, make sure you back up your data if you haven't already done so. If there aren't any significant errors then go into the System Preferences and click on Users & Groups. Try creating a new user account and then log into it to see if you have the same issues. Creating a new user for test purposes will help confirm whether you are dealing with some sort of software issue.
If a new user account resolves the issue then open the Activity Monitor application located in the Applications/Utiliteis folders and click on the CPU button. In the lower left corner you should see a summary listing the % User, % System, % Idle. What are these percentages? If the CPU idle percentage is near zero then you have a process running that is consuming your SPU time. To try and find it pull down the menu to select 'All Processes', then click on the %CPU column to sort by the percent that each process is consuming your CPU. The numbers constantly change, but do your best to see if there are one or two processes consuming the majority of the CPU time and post the names. Then do the same test in the new user account. I suspect you may have some process from a previously installed utility, virus checker, etc. that is keeping your system busy. I've included a screenshot from my system below. It doesn't have much going on, and as you can see in the lower left corner the CPU is basically idle most of the time. If I were to launch a CPU intensive app the numbers would change dramatically. -
My ios update keeps getting stuck on the Restoring iPhone software stage. I uninstalled iTunes and reinstalled it again, but still nothing. Now I can't even use my phone as it shows the plug into iTunes screen. Please help!!!! Thanks,
A Restore first downloads a new copy of iOS to your computer. On a slow Internet connection this can take a long time. How fast is your connection? How long would you expect it to take to download 900 MB?
That's assuming nothing is interfering with the download. Some firewalls and antivirus programs will block the download or slow it down. So you should temporarily disable your security software. Security software can also block the update after the iOS download is complete. -
My husband got a new ipad and set up his own apple id without looking into the implications of that. Now I want to sync this ipad with our itunes so we can access it on here, but our itunes has a different apple id. Any way to do this?
You should be able to accept this message, it will cause existing music, photos (not camera roll) and videos (also excluding those in camera roll) to be removed and replaced with those from this computer. All other user data on the iPad will be unaffected.
-
How to copy and paste the graphics from illustrator to MS word. What I tried is exporting in png with highest resolution and then inserting in to word. This loses a bit of resolution in comparison to direct copy and paste as EMF. But if I do a copy and paste, and then take a print of the document, all the graphs and text is printed upside down, flipped back.
Use the Pencil Tool
alex
adrian stock wrote:
> How to copy and paste a single pixel
>
> I want to copy a single pixel and then paste it in the
position of
> another pixel in the same image.
>
> (This is in effect changing the colour of the target
pixel, isn't it.
> But in my case copying an existing pixel seems simpler
than selecting a
> colour from the swatch or using the colour picker.)
>
> What is the most efficient way of doing this?
>
> I tried to select one pixel with the marquee tool. Then
copied it with
> control-C, but then how do I select the target pixel and
paste with
> control-V?
>
> Thanks for your help.
>
> Adrian
> -
I am trying to redeem my iTunes account with a gift card and it keeps coming up with "the Gift certificate or prepaid card code you entered has not been properly activated. Please contact iTunes customer support for assistance" what does this mean?
It all comes down to contact iTunes customer support for assistance.
iTunes Customer Service Contact - http://www.apple.com/support/itunes/contact.html > Get iTunes support via Express Lane > iTunes > iTunes Store -
I just recently upgraded from a 4S to a 5C. I backloaded the 5 from Itunes and now everytime i plug into itunes, it asks if I want to set up as new or restore from a previous backup. Why is it doing this. I did it twice yesterday..... In addtion, those are the only options I have. I cannot do anything else unless I choose one of the two. Zero options. Phone works fine though.
I figure that either of those options will result in losing all SMS and data created since the last backup. Not a major loss, but ** annoying when nothing has changed and the time it will take to restore.
When was the last time you synced your iPhone with iTunes since the backup is updated as the first step during the sync process?
Is there anyway to recover this WITHOUT having to do a full restore or set up as new?
In a word, no.
If I do restore or set up as new, how do I know it's not going to do the same thing tomorrow (like a few other forums threads I've read indicate might happen)?
There is no way to know for certain but I've never experienced the same in the first place. I venture to say having to do this is the exception rather than the rule. -
When I download an app from the App Store, it jus shows "waiting" and doesn't download as it used to do earlier... Then after a day or 2 the app is downloaded... I dunno wuz d problem, can someone help me
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again.
You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your app preferences and device settings again. -
I have an Epson scanner that is apparently no longer supported because it is a PowerPC app. It's a very good scanner that worked fine until I upgraded to OS Mountain Lion on my MacBook Pro. Any suggestions on how I can continue to use it?
For that model, Epson has this information:
ICA Scanner Driver
07/17/12
Description: The latest Mac OS X ICA scanner driver for your Epson product is available only via Apple's Software Update. Here's how to get it:
1. Connect the all-in-one or scanner to your Mac and power it on.
2. Select the menu, then Software Update.
3. Follow the on-screen instructions to install the available updates.
Note: Software Updates may find multiple updates for your system. You may choose to install all or some of the updates by clicking on Show Details.
Compatible Systems: Mac OS X (v10.8.x) -
I have just purchased the iPhone 5s and my previous phone was backed up on iCloud. However when I restored this on my new phone my photos are still being restored after 4 days. Shows the amount there but no pictures? Is there anything I can do to get them back as my other phone has now been cleared. On my iCloud storage it still shows that my previous phone had all the info still?? I'm confused!
Many users have lost photos while preforming a restore from backup or upgrading the iOS. Recall, only photos in the camera roll are backed up to iCloud. There is a way to turn backups for camera roll on/off, perhaps these users had camera roll turned off.
See:
Settings>icloud>Storage & Backups>Manage Storage, tap the device's name and on the next screen, be sure Camera Roll is turned on.
IMPORTANT...
Photos should be regularly synced to a computer (like you store photos from a digital camera) using either USB via iTunes (on a mac use iPhoto or Aperture to move them to an album) or using photo stream. If using Photo stream, but sure to move the received photos to a permanent album. If you have been doing that, then you can sync those photos back to your device.
Or, you can find other apps in the app store that send camera roll photos to a service like Dropbox.
If you haven't been saving photos except relying on iCloud to store them in a backup, then that is risky, as many users have discovered. I'm afraid I have no advice in this case - there is no "cure". -
Does anyone know what the situation is for Israel? Does this mean that there is NO content whatsoever?
I googled
"Unable to find file floatui.htm in the Configuration/Floaters directory"
and posted the first Adobe forums link which popped up.
You can often find answers to obscure issues if you google a few keywords from an obscure error message. -
The interactive responsiveness of my Mac Mail has gone to **** since I installed Lion last week. I can type a whole line ahead before it echos the characters. What's with that?
Is spotlight finished re-indexing?
If it is not a drive problem, maybe it is a runaway application. This article shows how to use Activity Monitor to check for that:
Runaway applications can shorten battery runtime -
My computer died and I had to buy another one. Now I can't sync my ipod classic. What is the deal with this? I added songs about three months ago and it was fine. Now it won't sync. It says it can't sync because there is a duplicate file.
There are server problems right now with iMessage effecting some users. See http://www.apple.com/support/icloud/systemstatus/.
-
i can no longer log into my ichat linked to my gmail. right after opening up ichat, receive the following message: lost connection with jabber. the server has unexpectedly disconnected. how to troubleshoot? thanks.
Hi,
There can be many reasons why the Login is "up the creek".
Any break in the network at your end whilst logged in will cause an issue.
A sort of discrepancy between what iChat thinks the state should be and what the server thinks.
If they don't agree the server will refuse to accept.
A Crash at the server end which does not log you out properly will also do it.
Any file at any time can be come corrupted.
Luckily with the iChat .plists they are recreated if removed with an iChat Restart.
If it were AIM you can also get your Account Suspended and this will not log you in.
(It tends to happen from Chat rooms where people notify AIM about bad behaviour (as they see it) and you have to apply to get Un-suspended).
Most of the big IM services use multiple servers.
Sometimes these go out of Sync.
In the case of AIM this happens when they remove Old unused Screen Names from people's Buddy List prior to making them available for re-registration. I am not sure if this happens at Google.
You seem to be talking about an account that has worked at Work and having new computer at home.
As I mentioned the Priority thing you have not said that it has coincided with the new computer logging in (this will kick the work Computer out of Google whether you are logged in on the Web Mail page or in iChat)
IN addition to that iChat stays partially logged in for Off Line IMs
This is done in the background by a support app called iChatAgent
If your Computer is ON but ichat is not started people can still send you Messages.
Instead of saving these on the server until you login iChat will start up.
Depending if the home Mac is effecting the Work Login it may be holding sway over your Login.
Using your girlfriend's login may have booted her Off Line where she normally uses the name/login.
The AIM Side can be specifically set to allow Multiple Logins and therefore NOT allow them. If this happens you get a warning and messages to do something about it.
You do not get these in any Jabber or Google Login as the Priority setting is supposed to take care of it.
If the Login works at the Web Mail Login and on one computer then the .plist on the work computer is the most likely issue.
There is a small chance that a Corrupt Buddy Pic (Home Folder/Library/Caches/com.apple.iChat/Pictures) may be the cause.
Set this folder to icon view and also use the Finder's View Menu > Show View Options and select icon view.
This should show all pics as their icon.
Check that all display properly.
At this point I would try a COMBO version update install of the last Update you did over what you have.
This often corrects hard to trace things
The 10.5.8 COMBO is here
11:28 PM Monday; June 20, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb( 10.6.7)
Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
my itunes keeps opening on its own without me opening it, it will happen again and again even after i close it. how do i fix it to make it stop doing this as it is extreemely annoying
If it is doing it while your device is plugged in, it is because it is set to automatically sync. Please go to: Preferences>Devices, and select the option to "Prevent iPods, iPhones, and iPads from syncing automatically." Also, I hate to be "that guy", but you spelt extremely wrong. Just a pro tip.
Maybe you are looking for
-
The wife's ibook g4 had some problems handling Leopard, so I switched back to 10.4. The installer saved the old system, however when I try to open a folder such as documents I get a message that I don't have permission. I tried changing ownership and
-
Can'[t print on C3150 - All-in-one
I can print from any other program, test page etc... but not from ID CS3 or from Acrobat (a pdf made in CS3), pulls paper in as if to print, then nothing else... I've tried all settings I think. Any ideas, or where to go for help. I called this a LJ3
-
I need immediate assistance please!!
I was updating the software for my Nokia 6133, and when it was on step 2, which is the installation of the updated version, my computer lagged and it force-shut the updater. This is WHILE my phone connected to it, updating, and it said if your phone
-
We recently upgraded from CF7 Standard to CF9.0 Enterprise. After working out several bugs, we have everything working correctly except the following. Undelivered mail messages are not being routed to the mail/Undelivered folder. I have to assume the
-
How can I manage a vendor approval process in SAP?
Please guide With regards to vendor approval Process & also share if u have case study