I need an update of Airport Utility.

I just bout a new Airport Extreme. When I started to set it up I got this dialogue box:
<This version of AirPort Utility doesn't support this AirPort wireless device and might improperly configure the device if you continue to use it. Check www.apple.com/support/airport for the latest version of AirPort Utility.>
First, there is no page for that address. Where do i find the update?
Thanks

If you are using Snow Leopard as per your profile you cannot update the airport utility anyway.. you must have Lion or Mountain Lion OS on the computer. The new utility is then available as part of the updated OS.. or you can download.
http://support.apple.com/kb/index?page=search&fac=Downloads&q=airport%20utility

Similar Messages

I have an Airport Express that I am trying to use connected by ethernet to my iMac G4 running Mac OS 10.4.11. I need to update the Airport software in order to use security option WPA2 Personal. I currently have Airport software v. 5.6.1.

I have an Airport Express that I am trying to use connected by ethernet to my iMac G4 running Mac OS 10.4.11. I need to update the Airport Express softwart in order to use security option WPA2 Personal to connect to the internet through my Airport Extreme. I currently have Airport Express software version 5.6.1. How can I update this software? (I can connect directly to my Airport Extreme by ethernet and download the update that way). Is a later version of A E software available for download anywhere? Any suggestions would be greatly appreciated.
Thanks.

Download and install AirPort Utility 5.4.2 for Mac OS X 10.4.11 "Tiger" here:
AirPort Utility 5.4.2
Once installed, launch AirPort Utility. It will tell you if a firmware upgrade is available for your Express.

Since updating my airport utility app to iOS 8, it can no longer see my base station and will not connect to wifi.

Since updating my airport utility app to iOS 8, it can no longer see my base station and will not connect to wifi. My son's 4s with an older version of the app sees it and connects fine, so I know it's working. The internet works fine for everyone else in the house but my

Please take a look at this Apple support document to see if it help solve your issue:
iOS: Troubleshooting Wi-Fi networks and connections
If this does not help, we would recommend that you post in the iPhone community support area, since you have an iPhone / iOS issue. The link is just below.
Using iPhone

After the Airport update today, Airport Utility no longer sees my new Extreme or my 2 new Airport Express relay stations (same network); however, my internet is working and all Airports are green?

After the Airport update today, Airport Utility 6.0 no longer sees my new Extreme or my 2 new Airport Express relay stations (same network); however, my internet is working and all Airports are green? I'm running Lion on my iMac and updated when Airport Utility prompted me to do so a few hours ago. After applying the updates is when Airport Utility stopped seeing my routers. But they are working? Thoughts?

Did you remember to completely power cycle the entire network?
You would want to do this after any update or change to the network.
If you did not do this yet......things are out of sequence.
Power off everything on the network.....all devices.....power down order is not important
Wait a few minutes
Start the modem first and let it run a minute or two by itself
Start the next device connected to the modem the same way
Work your way out on the network starting each device about a minute apart
Check the network

I just got a new Windows computer and need the download the airport utility for base station model A1408. Where do I find the download?

I just got a new Windows 7 computer and need the download the airport utility for airport extreme base station model A1408. Which download is it and where do I find it?

If you Google AirPort Utility for Windows 7......this is the first item that comes up:
AirPort Utility 5.6.1 for Windows - Apple

Cannot install update to Airport Utility

I've been having printing problems via Airport since updating to OS X 10.4.10. You can see my post about that under another thread: http://discussions.apple.com/thread.jspa?messageID=5183604
I decided to download and install the "AirPort Base Station Update 2007-002 for Mac," which was released 8-13-2007. It contains Airport Utility 5.2.1 updater. When attempting to install, I got an error message saying that I cannot install it because it requires Airport Utility 5.0 to be present.
So...I went to my Utilities folder and discovered that my version of Airport Admin Utility is 4.2.3! My Airport Setup Assistant is also 4.2.3. It says they were created in July of 2006.
I am running OS X 10.4.10, on an iMac that originally shipped in April 2007 with OS X 10.4.8. I would assume that it should have included Airport Admin Utility 5.0 when shipped or from an update.
I have searched the Apple website looking for a copy of Airport Admin Utility 5.0 to download and install so that I can update it to 5.2.1. No luck. I have no idea why I have an old version of these utilities that makes them non-update-able and I cannot seem to find the version I need in order to update it.
Any suggestions? Is there another download?
Thanks in advance for your help.
Toria

Thanks, Duane.
I have the round Airport Extreme 802.11 b/g model.
I am now a bit confused because Apple's info on the update says it is for "the AirPort Extreme Base Station with 802.11n, _AirPort Extreme Base Station_ and AirPort Express Base Station."
My round one is the one underlined above, so I thought the update was for my model when reading about it on Apple's website at:
http://www.apple.com/downloads/macosx/apple/application_updates/airportbasestati onupdate2007002formac.html
Thanks,
Toria

Airport Express b/g no longer working after update to Airport Utility 5.3.1

after updating to this the other day, my AE b/g no longer works - like many others on the forum, i get the flashing amber / yellow blinkie light situation. i can hard reset it and get it to initially show up in AU 5.3.1, but once i try to join it to my wireless network (i use it with my laser printer) it never takes, disappears from AU, and sits there flashing relentlessly.
seems pretty clear that it's related to the 5.3.1 update - it was working fine for nearly 2 years without any issues prior to this. i find it hard to believe it had a total failure related to this - in fact, i just finally updated yesterday after being asked to for 2 weeks, and that's when it stopped working, no question about it.
any ideas on getting it to work? i've tried everything on these forums to no avail. or am i stuck waiting on AU 5.3.2?

I just solved the same issue. First I reset my whole network from scratch by hard resetting all devices (1 AEBS N and two AXg). Then I started configuring my main base station and added the other devices to the network one by one. (I have a WDS). Only after setting all the devices to channel 6, did the green light stay on.
Apparently when you configure a AX to participate in an existing WDS network and you enter the existing network name in the configuration panel of Airport Utility, it creates a separate network with the same name. In order to force it to join the existing network, make sure their Airport ID numbers are entered under the WDS tab in Airport as WDS remotes.
Check this thread for the details: http://discussions.apple.com/thread.jspa?threadID=1440997

Updated to Airport Utility 5.3.2 - now can't see my time capsule disk!

I updated to 5.3.2 of the Airport Utility through software update but, after rebooting both my Mac and Time Capsule, I can now no longer access my Time Capsule's disk. Airport Utility says 'no disks found'
A similar thing happened after the update to 5.3.1 but I could still see the disk in Disk Utility, and once I'd verified it, it all worked OK again.

Okay guys. I called apple support, and the guy there fixed it for me. Reset the TC, and go through AirPort Utility again. The disk is there! Very happy that it was that easy, but bummed that they let the firmware go out like that. Seems like they'd catch that sort of thing.
The support guy was great, though. Very quick.
Good luck, hope this works for everybody!
-B

Installed the latest update, now Airport Utility doesn't see Airport

I ran the latest update, now my Airport Utility claims to not see my Airport Extreme although I'm still on my network.? Any suggestions before I completely reset the AE to factory settings and start over.

I purchased a new Airport Extreme last week, I run a home network with a G5 desktop and a G4 Laptop running 10.4.10. It took me a while to set it up as I entered the wrong password for my ISP SBCGlobal. After I finally had it going I had a couple of occasions where Airport Utility did not see Airport but I still had the solid green light on Airport. I am not sure what I did that resolved the problem but I know I did a restart one time and my Airport showed up. I may have also reset my base station and re-entered my info but I no longer have the problem.

Having problems updating my Airport Utility

Right now I am running version 5.5.1. Every time I use it It asks if I want to upgrade to 5.5.2. When I say yes it updates some Mac pro firmware and not my airport utility.
It does not upgrade the utility and if I try again it just upgrades the firmware all over again??
Help!!
Thanks
Dan Page

Although I am a Mac user, I do see that sort of panel from time to time, but not usually with the iPod software. With networks there are three parts (simply speaking): our end, Apple's end and the ISP (and what is in between).
If that downloads all (or almost all) there is the last check back to confirm size/data are OK. It sounds as if that is failing. It may of course be Apple's problem as thousands of others worldwide may be trying to download the file at the same time. For me, this one came down in one go and was installed with no problem: indeed, the changes are working really well.
I have found (again, I emphasise I am a Mac user) that most of my problems like that are with my ISP, and there are some, but fewer, from Apple's end. My usual method, after three or four frustrating goes like this, is first to restart the router (which will give me a different IP number) and then, if that fails, to go to bed and try the next day, which usually works as the ISP has woken up.

I upgraded my Airport Express from g to n and now my older desktop running 10.5.8 cannot connect even when I supply the correct password. Do I need to update the airport in the 10.5.8 system? What version is recommended?

I recently replaced my Airport Express (11g) to one running 11n. My iMac running 10.4.11 uded to work fine with 11g but now cannot connect to the 11n Airport Express. I can see the network listed and it asks for a WAP2 password, but when I supply the password it fails to connect.
Do I need to upgrade the airport software on the iMac, and to which version.
Bill Pratt

Tesserax,
Thank you for the suggestions. I tried first setting the radio mode to 802.11b/g compatible using the Option key hint that you supplied, but I got the same error message when I tried to join the network from my older Mac. (I apologize for saying in error that it was running 10.5.8, it was actually running 10.4.11--the last version that still supported Classic--and is a G4 PPC machine.)
The attempt to login to the network from the PPC machine gave me the standard log-in prompt, but I noticed that it asked for the WAP password, and my two other machines--both Intel MacBooks--get asked for the WAP2 password. The first time I noticed this I was still thinking the "error in trying to join the network" was a function of the 802.11n setup.
When your first suggestion didn't work, I reset the base station back to the original 802.11n (b & g compatible) but got the same error message--asking for a WAP password--so I went back into the setup, and selected the WAP/WAP2 Personal menu selection, restarted the base station, and was able to successfully join the network!
Your tip led me to the right place to fix my problem, Thank You,
Bill Pratt

I have a software update to airport utility 6 but I get an error message and a red exclamation mark in my software update.

Hi,
I tried several time to install the airport utility 6.0 but it will not install.
Every time i get an error message with a red exclamation mark.
I even tried to install the 5.4 utility but then I get the same error message.

I had to reinstall Lion, that solved the problem but it was a **** of a job.
Hans

TA26978 My airport Utility is stuck I cannot close it or update it

I am able to view my time capsule box using the airport utility. However, I cannot get it to close. It never appears with a minus sign to close the app. I have restarted my iPad several times I'm using the latest OS and I'm trying to update the AirPort Utility.

At this point, I think that you will need to contact Apple Support or take your iPad to an Apple Store to let them have a look...if you have one in your area.
The iPad support area may be able to help as well. This is not an Apple AirPort Extreme or AirPort Express issue, as AirPort Utility is part of the iOS operating system.
Using iPad

Updated airport utility will not work on older Airport Extreme

I have a mid-2011 Macbook Air with OS 10.9.4. So that's up-to-date. I recently updated my Airport Utility to version 6.2. I have an old Airport Extreme. The new Airport utility will not work with the old Airport Extreme. Apple will not let me download the older Airport Utility, because I have a newer one installed: classic Catch-22. Any ideas? I need to find out my SSID to connect with a new Denon AVR receiver. Is there any way to find out my SSID with Airport Utility?

You must first uninstall AU 6.2 before you can install an older version. This may be removed by the mods so get it while you can:
AirPort Utility 5.6.1 on OS X 10.9 Mavericks | Corey J. Mahler
Installing the Old AirPort Utility (Version 5.6) on Mountain Lion | frank.is

Are you having problems with Windows XP Pro and Airport Utility Updates?

I was having problems with my wireless laptop setting up my Bonjour Printer. I checked to make sure I had downloaded the latest updates to Airport Utility and Bonjour. Check. After doing this I noticed I couldn't see my Airport Extreme through the Airport Utility. After much frustration and bringing my entire network crashing down around me, I got help from a knowledgeable guy from Cox Cable in San Diego. He helped me get my trusty iMac Power PC online. It saw my Airport Extreme but no answers were forthcoming in any forums about my XP issues. Here is what finally solved my problem. I uninstalled all Airport Utility and Bonjour Programs. I then went back to Airport Utility 5.3.1 for Windows. It installs Bonjour Printer services with this download. Everything is working perfectly again. I have my Canon Pixma MP500 connected to the USB port on my AEBS and Bonjour walked right through the setup process. I suggest that if this works for you, turn off all Airport Utility and AEBS firmware updates until you see that whatever issue Apple created with these updates gets fixed.

Well... it worked! :D
I'm pretty sure the extra 512 memory stick was the problem, that would explain why it was being inconsistent with its type of failures before. I'm going to reinstall it later and run memtest86 and try and see if i can get it to work at all somehow without causing problems, cuz 1.5 was already low enough...
DryHeat, yeah it was with SP2 but I got it installed now so no worries
Thanks a lot!

I need an update of Airport Utility.

Similar Messages

Maybe you are looking for