I need button help...

I'm trying to set up something with multiple buttons on it.
When these buttons are clicked lines will appear on the screen. I
went through the process of making the buttons and I drew the lines
in the hit frame of the button, but when I test it nothing happens
when I click it.

The hit state within the button's is only the 'live'
clickable area and is not actually shown on the stage. You need to
trigger a movieclip to run using an onRelease event handler for the
buttons. Something like (in AS2.0):
linesMovieclip._visible = false;
mybutton.onRelease = function(){
linesMovieclip._visible = true;
Then have your lines within the linesMovieclip element.
Hope this helps.

Similar Messages

Need button help

hello all. i am new to this business, i have been
experimenting with flash for about a year, and am just getting my
bearings on things. i am building a website. my navbar is a movie
clip with buttons inside it. can i make my nested buttons control
my main timeline? it would seem as though i cant. here is my button
code located on my main timeline.
stop();
photo_btn.addEventListener(MouseEvent.CLICK, photopage);
function photopage(event : MouseEvent):void {
gotoAndStop("photo");
"photo" is the label of the frame that contains my photo
gallery. using that same formula works within my picture gallery
movie clip to navigate picture to picture using thumbnails as
buttons.
any help is very appreciated.
thanks...

ok let me try to clear up my situation. 'scene 1' has 4
layers: 'background', 'navigation bar', 'content', and 'actions'.
the navigation bar layer contains a movie clip called navbar. that
movie clip contains buttons. i am trying to get those buttons to go
to different frames in the 'content' layer of scene 1. for example,
clicking on the photo button (which is contained in a movie clip in
the navigation bar layer) will go to a frame in the content layer
(containing my picture gallery movie clip). the action script is
written in the action layer of scene 1, my main timeline.
i hope this clears up my situation, and thanks for your
help!

Hello..i have IPhone 4S i did reset to factory settings by fault and till now after a 2 hours there is nothing just a waiting icon in the middle of the screen and none of home or turn off button are response so i do need your help plz

hello..i have IPhone 4S i did reset to factory settings by fault and till now after a 2 hours waiting (as known it takes a 1 to 2 minutes maximum) there is nothing just a blank screen and a running waiting icon in the middle of the screen and none of home or turn off button are responsed so i do need your help plz & thanks in advance..

Try to reset it by holding the power an home buttons at the same time until you see the Apple logo, then release. If it won't reset, you'll probably have to force it into recovery mode and restore it, as explained here: http://support.apple.com/kb/ht1808.

HT4759 Please I need a help I cannot backup my ipad and can not get into the icloud storage. What would I do to get into my ipad? please I need your help

Please I need a help. I cannot backup my ipad and can not get into the iclous storage to delet them, because its read icloud storage is full. Please do you have a knowledge of how I can get rid of the message and get into the ipad?

Welcome to the Apple Community.
You might try a forced shutdown to begin with, hold down the top and home buttons together until the device shuts down, then restart it.

I Need Dire Help Making a Flash Form

Hello, I need some serious help creating a Flash Form.
I Have used a template from another site with the following
input boxes:
Name: __________
Email: __________
Comments: ____________
However, i had the script working fine, along with its php
script,
when i was trying to add more "text" boxes, i must have
messed the script up somhow.
When I submit that form, the name is send and email, but the
email is blank.. ie, there is no "comments"
here is the code:
on submit button:
on (release) {
// send variables in form movieclip (the textfields)
// to email PHP page which will send the mail
form.loadVariables("email.php", "POST");
sent email messege
onClipEvent(data){
// show welcome screen
_root.nextFrame();
and the php script (mailer.php)
php form email.pho
<?php
* PHP 4.1.0+ version of email script. For more
* information on the mail() function for PHP, see
http://www.php.net/manual/en/function.mail.php
// First, set up some variables to serve you in
// getting an email. This includes the email this is
// sent to (yours) and what the subject of this email
// should be. It's a good idea to choose your own
// subject instead of allowing the user to. This will
// help prevent spam filters from snatching this email
// out from under your nose when something unusual is put.
$sendTo = "[email protected]";
$subject = "My Flash site reply";
// variables are sent to this PHP page through
// the POST method. $_POST is a global associative array
// of variables passed through this method. From that, we
// can get the values sent to this page from Flash and
// assign them to appropriate variables which can be used
// in the PHP mail() function.
// header information not including sendTo and Subject
// these all go in one variable. First, include From:
$headers = "From: " . $_POST["firstName"] ." ".
$_POST["lastname"] . "<" . $_POST["email"] .">\r\n";
// next include a replyto
$headers .= "Reply-To: " . $_POST["email"] . "\r\n";
// often email servers won't allow emails to be sent to
// domains other than their own. The return path here will
// often lift that restriction so, for instance, you could
send
// email to a hotmail account. (hosting provider settings may
vary)
// technically bounced email is supposed to go to the
return-path email
$headers .= "Return-path: " . $_POST["email"];
// now we can add the content of the message to a body
variable
$message = $_POST["message"];
// once the variables have been defined, they can be included
// in the mail function call which will send you an email
mail($sendTo, $subject, $message, $headers);
?>
If anyone can see why the "comments" section is not being
sent?
Also: My original problem was how do you add more text boxes.
I want something like this:
Name:
Address:
Phone:
Mobile:
Email:
Website:
Comments:
Ive spent days and days trying to work out how to first make
a form that actually works, then add more text fields
Ive looked at many basic form tutorials, but they all seem to
only have 3 or 4 text fields.. Name, Email, Comments... etc
I haven't a clue how to edit the script both in action script
and php to add more fields easy.
I really need some help with this, its turning into a
nightmare for me.
I can provide someone with my .fla project file if they care
to take a look at what im doing wrong.
Thanks
Pan
ps. Please note: "$sendTo = "[email protected]";" =
this line i know i must put in my own email.

This is all about timelines. It seems there is a movieclip
named 'form' (or possibly an actionscript object, can't tell). Any
variables created on that timeline are sent.
So you could have your new textfields on another timeline.
Or you could have textfields with no instance name in the
form timeline.
Those are the first two things to look at. Post the FLA and
we can tell you more specifically.

Hi i have an ipad mini and i have not used it for 2 month or more. Today i have tried to use it i came across with a problem. my Ipad is blocked and it asks me to wait 23,401,418 :) what should i do need your help. thanks

hi i have an ipad mini and i have not used it for 2 month or more. Today i have tried to use it i came across with a problem. my Ipad is blocked and it asks me to wait 23,401,418 what should i do need your help. thanks

Have you charged ipad Try a Reboot press & hold power button & menu button hold both down until you see Apple Logo You may need to do this more than once. Bsydd uk

Need some help...in need of a different way.

Hi, I'm new to Java and need some help. I have 2 questions that are similar in nature.
1st Question:
In a program that I'm writting I have a do-while loop which at the end brings up a dialog box that asks the user to enter '1' for 'Yes' or '2' for 'No' to continue.
I would rather have the option of having the user enter 'y' or 'Y' for Yes and 'n' or 'N' for No.
Here is what I have currently:
int x;
String data;
do{
//Blah blah code
data = JOptionPane.showInputDialog(null, "Enter 1 for Yes or 2 for No");
x = Integer.parseInt(data);
}while(x == 1);
x++;
2nd Question:
In another part of my program I have a Case statement that asks the user to enter a number or a letter from a list of choices. They can enter '2' , 't', or 'T'.
I would rather have all of this in an if-else chain. Is this possibe? if so, how would I do it.
Thanks.

I would rather have the option of having the user enter 'y' or 'Y' for Yes and 'n' or
'N' for No. You can test the first letter of whatever the user inputs like this:String response = JOptionPane.showInputDialog(null, "Enter (Y)es or (N)o");
response = response.toLowerCase();
if(response.startsWith("y")) {
    // the user entered something starting with y
} else if(response.startsWith("n")) {
    // the user entered something starting with n
} else {
    // what are you going to do?
}JOptionPane also has versions that would allow yes/no buttons. Eg, see:
http://java.sun.com/docs/books/tutorial/uiswing/components/dialog.html

Anybody who can help me? I really need your help

I've tried to execute J2ee tutorial examples.
I don't know why this sample didn't execute...I've already finished to set up J2EE and enviornment variables.
I was trying this part from j2ee tutorial titled as "Packing Web modules".
Whenever I type "asant create-war" to make web modules in command window. I always got error.
Packaging Web Modules(From J2ee tutorial for your information)
A web module must be packaged into a WAR in certain deployment scenarios and whenever you want to distribute the web module. You package a web module into a WAR using the Application Server deploytool utility, by executing the jar command in a directory laid out in the format of a web module, or by using the asant utility. This tutorial allows you to use use either the first or the third approach. To build the hello1 application, follow these steps:
In a terminal window, go to <INSTALL>/j2eetutorial14/examples/web/hello1/.
Run asant build. This target will spawn any necessary compilations and will copy files to the <INSTALL>/j2eetutorial14/examples/web/hello1/build/ directory.
To package the application into a WAR named hello1.war using asant, use the following command:
asant create-war
This command uses web.xml and sun-web.xml files in the <INSTALL>/j2eetutorial14/examples/web/hello1 directory.
To learn how to configure this web application, package the application using deploytool by following these steps:
Start deploytool.
Create a web application called hello1 by running the New Web Component wizard. Select FileNewWeb Component.
In the New Web Component wizard:
Select the Create New Stand-Alone WAR Module radio button.
In the WAR File field, enter <INSTALL>/j2eetutorial14/examples/web/hello1/hello1.war. The WAR Display Name field will show hello1.
In the Context Root field, enter /hello1.
Click Edit Contents to add the content files.
In the Edit Contents dialog box, navigate to <INSTALL>/j2eetutorial14/examples/web/hello1/build/. Select duke.waving.gif, index.jsp, and response.jsp and click Add. Click OK.
Click Next.
Select the No Component radio button and click Next.
Click Finish.
Select FileSave.
A sample hello1.war is provided in <INSTALL>/j2eetutorial14/examples/web/provided-wars/. To open this WAR with deploytool, follow these steps:
Select FileOpen.
Navigate to the provided-wars directory.
Select the WAR.
Click Open Module.
I guess this step is for checking my system about setup information. I not sure how to change it.
the result from execution of ansnt command in dos
D:\J2ee\j2ee-1_4-doc-tutorial_7\j2eetutorial14\examples\web\hello1>asant create- war Buildfile: build.xml
j2ee-home-test:
BUILD FAILED D:\J2ee\j2ee-1_4-doc-tutorial_7\j2eetutorial14\examples\common\targets.xml:10: T he j2ee.home property is not properly set in <INSTALL>/j2eetutorial14/examples/c ommon/build.properties.
Set the j2ee.home property to the location of your Application Server installati on.
On Windows, you must escape any backslashes in the j2ee.home property with anoth er backslash or use forward slashes as a path separator. So, if your Application Server installation is C:\Sun\AppServer, you must set j2ee.home as follows:
j2ee.home = C:\\Sun\\AppServer
or
j2ee.home=C:/Sun/AppServer
j2ee.home is currently set to:
Total time: 0 seconds
D:\J2ee\j2ee-1_4-doc-tutorial_7\j2eetutorial14\examples\web\hello1>
I've installed J2ee sdk in C:\Sun\AppServer
PATH: %J2EE_HOME%\bin;%JAVA_HOME%\bin;
CLASSPATH: %J2EE_HOME%\lib\j2ee.jar;C:\Java\jre1.6.0_05\lib\ext\QTJava.zip;C:\oraclexe\app\oracle\product\10.2.0\server\jdbc\lib\ojdbc14.jar
J2EE_HOME: C:\Sun\AppServer
JAVA_HOME: C:\Sun\AppServer\jdk
I've installed J2ee with administration 4848, HTTP: 8089 HTTP: 8090
I guess this could refer the target.xml and build.properties. So, I've tried after changing some value, which is fit for my setup.
but, still doesn't work.
targets.xml
<path id="classpath">
<fileset dir="${j2ee.home}/lib">
<include name="j2ee.jar"/>
</fileset>
</path>
<target name="j2ee-home-test" >

<available file="${j2ee.home}/lib/j2ee.jar" type="file" property="j2ee.jar.present" />
<fail unless="j2ee.jar.present">
The j2ee.home property is not properly set in <INSTALL>/j2eetutorial14/examples/common/build.properties.
Set the j2ee.home property to the location of your Application Server installation.
On Windows, you must escape any backslashes in the j2ee.home property with another backslash or use forward slashes as a path separator. So, if your Application Server installation is C:\Sun\AppServer, you must set j2ee.home as follows:
j2ee.home = C:\\Sun\\AppServer
or
j2ee.home=C:/Sun/AppServer
j2ee.home is currently set to: ${j2ee.home}
</fail>
</target>
<target name="clean" >
<delete dir="${build}" />
<delete dir="${dist}" />
<delete dir="${assemble}" />
<delete file="${ear.name}" />
<delete file="${war.name}" />
<delete file="${war.file}" />
<delete file="${client.jar.name}" />
</target>
<path id="db.classpath">
<fileset dir="${db.root}/lib">
<include name="*.jar"/>
</fileset>
</path>
<target name="create-db_common"
depends="init,start-db,delete-db"
description="Create database tables and populate database." >
<sql driver="${db.driver}"
url="${db.url}"
userid="${db.user}"
password="${db.password}"
classpathref="db.classpath"
delimiter="${db.delimiter}"
autocommit="false"
onerror="abort" >
<transaction src="${sql.script}"/>
</sql>
</target>
<target name="delete-db"
description="Deletes the database tables." >
<sql driver="${db.driver}"
url="${db.url}"
userid="${db.user}"
password="${db.password}"
classpathref="db.classpath"
delimiter="${db.delimiter}"
autocommit="false"
onerror="continue" >
<transaction src="${delete.sql.script}"/>
</sql>
</target>
<target name="ping-db"
description="Checks to see if Derby is running." >
<java classname="org.apache.derby.drda.NetworkServerControl"
fork="yes"
resultproperty="db.ping.result">
<jvmarg line="${db.jvmargs}" />
<arg line="ping" />
<classpath refid="db.classpath" />
</java>
<condition property="db.running">
<equals arg1="${db.ping.result}" arg2="0" />
</condition>
</target>
<target name="start-db"
unless="db.running"
description="Starts the Derby databse server."
depends="ping-db">
<sun-appserv-admin
explicitcommand="start-database" />
</target>
<target name="stop-db"
description="Stops the Derby database server."
depends="ping-db"
if="db.running">
<sun-appserv-admin
explicitcommand="stop-database" />
</target>
<target name="admin_command_common">
<echo message="Doing admin task ${admin.command}"/>
<sun-appserv-admin
command="${admin.command}"
user="${admin.user}"
passwordfile="${admin.password.file}"
host="${admin.host}"
port="${admin.port}"
asinstalldir="${j2ee.home}" />
</target>
<target name="create-jdbc-resource_common">
<antcall target="admin_command_common">
<param name="admin.command"
value="create-jdbc-resource
--connectionpoolid ${conpool.name} ${jdbc.resource.name}" />
</antcall>
</target>
<target name="delete-jdbc-resource_common">
<antcall target="admin_command_common">
<param name="admin.command"
value="delete-jdbc-resource ${jdbc.resource.name}" />
</antcall>
</target>
<target name="deploy-war">
<antcall target="admin_command_common">
<param name="admin.command"
value="deploy ${war.file}" />
</antcall>
</target>
<target name="undeploy-war">
<antcall target="admin_command_common">
<param name="admin.command"
value="undeploy ${example}" />
</antcall>
</target>
<property environment="env" />
<target name="listprops"
description="Displays values of some of the properties of this build file">
<property file="../../common/admin-password.txt" />
<echo message="Path information" />
<echo message="j2ee.home = ${j2ee.home}" />
<echo message="j2ee.tutorial.home = ${j2ee.tutorial.home}" />
<echo message="env.Path = ${env.Path}" />
<echo message="env.PATH = ${env.PATH}" />
<echo message="" />
<echo message="Classpath information" />
<echo message="classpath = ${env.CLASSPATH}" />
<echo message="" />
<echo message="Admin information" />
<echo message="admin.password = ${AS_ADMIN_PASSWORD}" />
<echo message="admin.password.file = ${admin.password.file}" />
<echo message="admin.host = ${admin.host}" />
<echo message="admin.user = ${admin.user}" />
<echo message="admin.port = ${admin.port}" />
<echo message="https.port = ${https.port}" />
<echo message="" />
<echo message="Domain information" />
<echo message="domain.resources = ${domain.resources}" />
<echo message="domain.resources.port = ${domain.resources.port}" />
<echo message="" />
<echo message="Database information" />
<echo message="db.root = ${db.root}" />
<echo message="db.driver = ${db.driver}" />
<echo message="db.host = ${db.host}" />
<echo message="db.port = ${db.port}" />
<echo message="db.sid = ${db.sid}" />
<echo message="db.url = ${db.url}" />
<echo message="db.user = ${db.user}" />
<echo message="db.pwd = ${db.pwd}" />
<echo message="url.prop = ${url.prop}" />
<echo message="ds.class = ${ds.class}" />
<echo message="db.jvmargs = ${db.jvmargs}" />
</target>
build.properties ��
j2ee.home=
j2ee.tutorial.home=
asinstall.dir=${j2ee.home}
admin.password.file=${j2ee.tutorial.home}/examples/common/admin-password.txt
admin.host=localhost
admin.user=admin
admin.port=4848
https.port=8181
domain.resources="domain.resources"
domain.resources.port=8080
# Derby configuration settings
db.delimiter=;
db.root=${j2ee.home}/derby
db.driver=org.apache.derby.jdbc.ClientDriver
db.datasource=org.apache.derby.jdbc.ClientDataSource
db.host=localhost
db.port=1527
db.sid=sun-appserv-samples
db.url=jdbc:derby://${db.host}:${db.port}/${db.sid};create=true;
db.user=APP
db.pwd=APP
db.jvmargs=-ms16m -mx32m
Is there anyone who can tell me how to change it? I really need your help....
Thank you in advance.

ok,
First of all make sure your tutorial folder is installed from the root:
C:\javaeetutorial5
or
D:\javaeetutorial5
it makes things so simple.
Secondly:
set your jee tutorial home
JAVAEE.TUTORIAL.HOME =
C:/javaeetutorial5
Thirdly: check in:
C:\javaeetutorial5\examples\bp-project
make a copy of the build.properties.sample save it as build.propropties, as a property file,
edit the properties file as in:
build.properties
As follows:
# uncomment the property javaee.home, and add the path
# to your GlassFish Java EE 5 SDK installation
javaee.home=c:/Sun/SDK
javaee.tutorial.home=c:/javaeetutorial5
# Uncomment the property j2ee.server.username,
# and replace the administrator username of the app-server
javaee.server.username=admin
# Uncomment the property j2ee.server.passwordfile,
# and replace the following line to point to a file that
# contains the admin password for your app-server.
# The file should contain the password in the following line:
AS_ADMIN_PASSWORD=admin1234and so fourth. Some of the settings as the application server name is all done for you
and then test it again.
Take care of editing the property file. It can give you headache.
Note also that this is for application server 9.1 - JEE5.
eve

My iphone 4 has switch of itself, and cant switch on its blankout , i need some help to solve this matter, My iphone 4 has switch of itself, and cant switch on its blankout , i need some help to solve this matter

i need some help! my i phone has switch off totally blank as if there is no baterry, i cant wsitch on anymore, i live in Africa whereby there is no any apple offises arroung, i want to find a solution thats why i am asking for the help

Plug in iPhone with Wall Charger for 10 minutes, it may turn on itself. If not, keep on Wall Charger and Reset, hold both Home and Power buttons until the iPhone begins to restart. This usually takes less than 20 seconds of holding both buttons.

Please I Need A Help ,

Hi , I Using Blackberry Curve 9220 ,
, I Buy This Blackberry From Someone ,
But I Do Not Know Him , And I Never Saw Him Again ,
So The Problem Is , Enterprise Activation Password ,
Where Can I Get The Activation Password ?
I Really2 Need Help Here ,
I Cannot Open The Appworld , Bis( FB , Twitter Application , BBM )
So What Should I Do Right Now ?
Please , Help Me , I Really2 Need Your Help , Y_Y

Hi and Welcome to the Community!
First off, if you are not an enterprise subscriber, then the Enterprise selection is not relevant to you...rather to use the proprietary BB services (including Push email capability, BBM, etc.), you must have an adequate data plan from your carrier. The carriers host BIS (BlackBerry Internet Service) for their BB users. Typically, BIS is not available via generic data plans. Many carriers call what is necessary The Blackberry Data Plan. Whatever they call it, it is the carrier who delivers BIS to their BB users -- contact them for assistance. Once you have a Push-email enabled BIS-capable data plan on your BB (at whatever fees your carrier will charge, btw), your BB-proprietary services will function (e.g., you will have Personal/Internet Email added to the email setup wizard, your BBM will function, etc).
http://www.blackberryfaq.com/index.php/What_do_I_need_a_Data_Plan_for%3F
With hundreds of carriers in the world, each with dozens of different data plans, it's impossible to tell you specifically what any service plan might actually provide. Only the carriers can answer that question. The best thing to do is to decide what services you desire, and then talk to your carrier about obtaining (from them) a data plan that enables what you desire.
BUT...your potential problems do not end there (they may not even start there!!). See this:
B05099 Steps to take before selling or after buying a previously owned BlackBerry smartphone
If the person who sold it to you did not properly complete ALL of the SELLER steps, you may never be able to get this BB working on any network. Further, it is completely possible that the BB is reported as lost or stolen, which will preclude its functionality for ever.
So, here's some more information for you...
Any BB can be used on any carrier that runs the same radio frequencies that the BB is capable of (and I've no idea if your's are such). But, to bring a BB onto a carrier network that they did not sell to you, there are several hurdles to cross:
1) The carrier must say "yes" to the fact...they own their network and have every right to say what devices will be allowed to connect to it. If they say "no", then that's the end of it.
2) You must be sure that your BB is properly unlocked from it's originally manufactured-for carrier...see this helpful thread for details:
http://supportforums.blackberry.com/t5/General-BlackBerry-Functions-and/Unlocking-your-BlackBerry-Gu...
3) You must get all of your voice level services functioning on the carrier, before you even try anything about data
4) You must subscribe, from the carrier, to an adequate data plan to enable the BB-proprietary services you desire
5a) If the carrier directly supports your specific model BB, then you can proceed with registering the BB onto their network, generating the proper Service Book delivery to your BB, and proceeding to function.
5b) But, if the carrier does not directly support your specific model number of BB, then the challenges are much greater as most carrier systems will not deliver, to the BB, the necessary service books to enable the BB-proprietary data services, even if you do subscribe to them.
So, depending on all of that, your BB may or may not ever fully function on that carrier network. It can be quite tricky to accomplish, especially if 5b applies. So take a look at all of that and decide how you wish to proceed. Most folks wind up just buying a new BB if 5b applies.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

I need heed help for Handle the JButton

hi, guys
I am writing a small program
It has name and number field.
It also has the first, privious, next , last and add buttons.
i want to load the myData.txt file to the name and number field.
and I want to make the buttons handle the events.
and when the application is closed, it will save the data into the files.
I can assign the the add button to save the files, and save the data when it is closed, but I can not make it save more than one record.
i need ur help to the rest of the buttons, and load the file back to the field.
andy suggestion would be great!
Thank !
here codes
   import javax.swing.*;
   import java.awt.event.*;
   import java.awt.*;
   import javax.swing.event.*;
   import java.io.*;
    public class buttonAction extends JFrame
      private JLabel nameL;
      private JLabel numberL;
      private JTextField name;
      private JTextField number;
      private JButton first;
      private JButton prev;
      private JTextField current;
      private JButton next;
      private JButton last;
      private JButton add;
      private JButton exit;
      private final int winw = 410;
      private final int winh = 200;
       private buttonAction()
         super("Wage Calculate");
         setSize(winw, winh);
         setDefaultCloseOperation(JFrame.DO_NOTHING_ON_CLOSE);
         addWindowListener(new Closing());
         setLayout (new BorderLayout());
         loadData();
         buildPanel();
         buildButtomButtons();
         setVisible(true);
       private void buildPanel()
         nameL = new JLabel("Name:");
         numberL = new JLabel("Number:");
         name = new JTextField(10);
         number = new JTextField(5);
         JPanel panel =new JPanel();
         panel.setLayout(new GridLayout(2,1));
         panel.add(nameL);
         panel.add(name);
         panel.add(numberL);
         panel.add(number);
         add(panel, BorderLayout.NORTH);
       private void buildButtomButtons()
         first = new JButton("First");
         prev = new JButton("Prev");
         current = new JTextField(5);
         current.setEditable(false);
         next = new JButton("Next");
         last = new JButton("Last");
         add = new JButton("Add");
         exit = new JButton("Exit");
         JPanel button = new JPanel();
         first.addActionListener(new ButtonListener());
         prev.addActionListener(new ButtonListener());
         current.addActionListener(new ButtonListener());
         next.addActionListener(new ButtonListener());
         last.addActionListener(new ButtonListener());
         add.addActionListener(new ButtonListener());
         button.add(first);
         button.add(prev);
         button.add(current);
         button.add(next);
         button.add(last);
         button.add(add);
         add(button, BorderLayout.SOUTH);
        // save the data into the file when the application is close
       public class Closing extends WindowAdapter
          public void windowClosing(WindowEvent e)
            try {
               PrintWriter out = new PrintWriter (new FileWriter("myData.txt"));
               out.println (name.getText());
               out.println(number.getText());
               out.close();
                catch (IOException ee) {
               // Happens if the file cannot be written to for any reason
                  JOptionPane.showMessageDialog(null, "Could not save the file " + ee.getMessage());
            System.exit(0);
       private void loadData()
         try {
            BufferedReader fileReader = new BufferedReader(new FileReader(new File("myData.txt")));
            String lineRead = fileReader.readLine();
              // I need help how to load the data
             catch (FileNotFoundException e)
               e.printStackTrace();
             catch (IOException e) {
               e.printStackTrace();
        //handle the first, previous, next, last, add buttons
       private class ButtonListener implements ActionListener
          public void actionPerformed(ActionEvent e)
            Object button = e.getSource();
            if (button == add)
               try
                  PrintWriter out = new PrintWriter (new FileWriter("myData.txt"));
                  out.println (name.getText());
                  out.println(number.getText());
                  out.close();
                   catch (IOException ee)
                  // Happens if the file cannot be written to for any reason
                     JOptionPane.showMessageDialog(null, "Could not save the file " + ee.getMessage());
                    //I need help for the first, privious and last buttons
       public static void main(String[] args)
         buttonAction pr = new buttonAction();
   }

are you trying to load a multi line textfile int a JTextField? If you try to load this in a while loop as you read the file, it will zoom through the file, and you will probably only see the last line of the file (or nothing if the last line is blank) in the jtextfield. Consider using a JTextArea or some other component that can hold multiple lines. Also your file reading method calls look wrong to me. You appear to read a line, then continually check if that one read line is null, and if not do a while loop, that looks to loop forever. Look at the java I/O examples for how to do this right.
Good luck

ALV List in the same Column for the row CELL i need button or value

Hi,
In my ALV list for the same column I need Button or Value for the different rows (CELL) depending upon my condition.
as well as I have to make read only of 3 rd column CELL based on my first column dropdown value CELL for this Row Only.
Depends upon the value in column 1 / row 2   I have to read only the CELL of   column 5 / row 2   ie for the same row.
Depends upon the value in Column 1/ row 3    I have to   EDITABLE or   Button   the CELL of column 5 / row 3 ie for the same row
How to do the logic for this.
I tried and got it for the entire column only.
But my requirement is for the sepecific cell in the column.
Kindly help to proceed further.
Thanks in advance.
Dav

Here is how you can make a particular cell in the row read-only based on certain conditions.
In my example I am displaying the flight details in an ALV. Here I am checking the airline id and if it is "AA' I am making the cell in the column airline id as readonly. In my example I am putting a check and readonly on the same column. However you can do this for different columns as well.
In order to achieve this you need to add a new context attribute 'READONLY' of type abap_bool to the context node which is bound to data node of ALV.
The method where I populate the node has the following code to populate the data.
data: lr_input_node type ref to if_wd_context_node,
        lr_flight_node type ref to if_wd_context_node,
        lv_cityfrom   type s_from_cit,
        lv_cityto     type s_to_city,
        ls_from       type bapisfldst,
        ls_to         type bapisfldst,
        lt_flights    type table of bapisfldat,
        ls_flights    type bapisfldat.
data: lt_final type if_mainview=>elements_node_flighttab,
        ls_final type if_mainview=>element_node_flighttab.
* Instantiate the variable lr_input_note to the node NODE_FLIGHT
lr_input_node = wd_context->get_child_node( name = 'NODE_FLIGHT' ).
* Instantiate the variable lr_flight_note to the node NODE_FLIGHTTAB
lr_flight_node = wd_context->get_child_node( name = 'NODE_FLIGHTTAB' )
* Get the attributes CityFrom und CityTo
lr_input_node->get_attribute( exporting name = 'CITYFROM'
                                importing value = lv_cityfrom ).
lr_input_node->get_attribute( exporting name = 'CITYTO'
                                importing value = lv_cityto ).
* Fill the stuctures ls_from and ls_to
ls_from-city = lv_cityfrom.
ls_to-city   = lv_cityto.
* Call the function BAPI_FLIGHT_GETLIST
call function 'BAPI_FLIGHT_GETLIST'
   exporting
     destination_from       = ls_from
     destination_to         = ls_to
   tables
     flight_list            = lt_flights.
Now I am going to check if the airline id is 'AA' and based on that I will fill the readonly context attribute.
loop at lt_flights into ls_flights.
    MOVE-CORRESPONDING ls_flights to ls_final.
    if ls_flights-airlineid = 'AA'.
      ls_final-readonly = abap_true.
    else.
      ls_final-readonly = abap_false.
    endif.
    append ls_final to lt_final.
endloop.
Finally bind the data to the context node.
* Bind the data to the node NODE_FLIGHTTAB
lr_flight_node->bind_elements( lt_final ).
Now you need to do the ALV configuration settings.
* create an instance of ALV component
DATA:
    lr_salv_wd_table_usage TYPE REF TO if_wd_component_usage.
lr_salv_wd_table_usage = wd_this->wd_cpuse_alv( ).
IF lr_salv_wd_table_usage->has_active_component( ) IS INITIAL.
    lr_salv_wd_table_usage->create_component( ).
ENDIF.
* get ALV component
DATA:
    lr_salv_wd_table TYPE REF TO iwci_salv_wd_table.
lr_salv_wd_table = wd_this->wd_cpifc_alv( ).
wd_this->alv_config_table = lr_salv_wd_table->get_model( ).
CALL METHOD wd_this->alv_config_table->if_salv_wd_table_settings~set_read_only
    EXPORTING
      VALUE = ABAP_FALSE
* set visible row count
DATA:
    lr_table_settings TYPE REF TO if_salv_wd_table_settings.
lr_table_settings ?= wd_this->alv_config_table.
lr_table_settings->set_visible_row_count( '10' ).
DATA:
    lr_column_settings TYPE REF TO if_salv_wd_column_settings,
    lr_column          TYPE REF TO cl_salv_wd_column.
lr_column_settings ?= wd_this->alv_config_table.
DATA: lr_input_field TYPE REF TO cl_salv_wd_uie_input_field.
lr_column = lr_column_settings->get_column( 'AIRLINEID' ).
CREATE OBJECT lr_input_field EXPORTING value_fieldname = 'AIRLINEID'.
lr_column->set_cell_editor( lr_input_field ).
lr_input_field->set_read_only_fieldname( value = 'READONLY' ).
CALL METHOD lr_column_settings->delete_column
    EXPORTING
      id     = 'READONLY'

HT1222 I need some help.... I Have the iPhone 4S and downloaded the new software (6.0) and everything seems great so far except when I try to open a link in safari from a different app (messages, Facebook, ext..) it glitches and won't load. Any advice?

I need some help.... I Have the iPhone 4S and downloaded the new software (6.0) and everything seems great so far except when I try to open a link in safari from a different app (ie..messages, Facebook, ect..) it glitches and won't load. The blue loading bar will just jump back and forth and the page will not load properly if at all....

It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
http://www.adwaremedic.com/kb/baddns.php
http://www.adwaremedic.com/kb/hackedrouter.php
If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

Need urgent help. I have been trying to resolve this problem to no avail. I am able to preview my sp

Need urgent help. I have been trying to resolve this problem to no avail. I am able to preview my sprymenu on my local browsers opera, google crome, and IE but when it is uploaded, the sprymenu squashes to the left hand side.

Please get your checkbook ready. (Only kidding.)
Have you ever done a hard factory reset of your Airport Express base? If not, then try it. Push down the reset button with a pen, then keep it depressed as you plug AX into the wall and keep holding it down until the green light blinks 4 times and then turns amber. Then let go. Unplug your broadband modem for a couple of minutes and shut down your Mac. First restart the modem, then the Mac. Use Airport Setup Assistant to set up a new network from scratch.
In System Prefs > Network > Show > Network Port Configurations drop n drag Airport to the top of the list and deselect all port configurations that you do not use.
That's a start.

I am new to mac air. Today i installed (unsuccessfully!) MAPLE16 on my mac book air. Now since it does not work properly (it also does not appear in applications) i decide to delete it. I could not remove it from launchpad . i need urgent help

i am new to mac air. Today i installed (unsuccessfully!) MAPLE16 on my mac book air. Now since it does not work properly (it also does not appear in applications) i decide to delete it. I could not remove it from launchpad . i need urgent help from your side.

Any third-party software that doesn't install by drag-and-drop into the Applications folder, and uninstall by drag-and-drop to the Trash, is a system modification.
Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
I never install system modifications myself, and I don't know how to uninstall them. You'll have to do your own research to find that information.
Here are some general guidelines to get you started. Suppose you want to remove something called “BrickMyMac” (a hypothetical example.) First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickmyrmac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, contact the developer. While you're waiting for a response, download BrickMyMac.dmg and open it. There may be an application in there such as “Uninstall BrickMyMac.” If not, open “BrickMyMac.pkg” and look for an Uninstall button.
You generally have to reboot in order to complete an uninstallation.
If you can’t remove software in any other way, you’ll have to erase and install OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
You may be advised by others to try to remove complex system modifications by hunting for files by name, or by running "utilities" that purport to remove software. I don't give such advice. Those tactics often will not work and maymake the problem worse.

I need button help...

Similar Messages

Maybe you are looking for