I NEED CLARIFICATION ON THIS CLAIM!!!!
====SOME .NET GUY WAS CLAIMING THE FOLLOWING IN A .NET BOOK. I NEED TO KNOW IF ANYONE HAS EXPERIENCED THE SAME=============
"One attempt to solve the problem of creating software that will work on multiple platforms
has been to use Sun Microsystems� Java programming language. To run Java, a
computer must have a Java Virtual Machine (JVM), which will interpret the Java byte
code at runtime. Because JVMs are available in browsers for multiple platforms, it would
appear that Java has solved part of the problem. In reality, however, there can be
incompatibility in the execution of the same Java byte code even on the same platform.
For example, in a recent Java project, I needed to use radio buttons but without any text
associated with them. I accomplished this by setting the radio button text to an empty
string. This approach worked, but in Microsoft Internet Explorer, when the radio button
with no text was selected, a small dotted-line box appeared next to the radio button
where the text would have been. The solution seemed simple: instead of not setting the
text of the radio button or setting the text of the radio button to an empty string, I explicitly
set the text of the radio button to null. This remedy worked for a time. Unfortunately,
when a new version of Netscape Navigator came out, setting the text of the radio button
to null not only didn�t work, but also actually caused the browser to end hard, displaying
an error message referencing some C++ source code. So much for Java�s crossplatform
compatibility."
That's a pathethic little example from the .NET guy.
I'm assuming he was using applets....
Most enterprise level java applications use a HTML based front end, with the likes of Struts. It's thin client, and doesn't require security permissions on the client PC to enable Java applets.
Also, he didn't say whether he used the Microsoft virtual machine in Internet Explorer, or the Sun plugin virtual machine. It could've been Microsofts problem with it's old VM only supporting Java 1.1.7b.
regards,
Owen
Similar Messages
-
Need clarification on issue with tablespaces
Hi All,
I needed clarification on this issue with tablespaces.I am following a guideline which says "Presently,The general rule of thumb is to concentrate on tablespaces that are 90% or greater used and have less than 2 GB of free space"
My Scenario:-Now i have tablesace which is 97.23 % and the free space is 10 gb.Please advise me that whats the best next step I can take in this respect?
I am very new to this and just following the guideline,so can you all please explain me some details about this.
ThanksWell, the guideline says "*and* have less than 2 GB of free space"
Since that tablespace as 10GB of free space, the guideline says that you do not need to concentrate on it. Eh ?
I would be careful with guidelines that are hard-coded in this manner. You need to know the context in which the guideline was set.
Assuming that your database/application doesn't grow suddenly by 1GB or larger (or create temporary segments / objects of 1GB or larger), the "2 GB of free space" might make sense. Then, again, it depends on the extent allocation type. What size are extents getting allocated.
You should check with your organisation's senior DBAs on what happens if you don't concentrate on a tablespace because it is outside the guidelines ! -
I need help with this script please ASAP
So I need this to work properly, but when ran and the correct answer is chosen the app quits but when the wrong answer is chosen the app goes on to the next question. I need help with this ASAP, it is due tommorow. Thank you so much for the help if you can.
The script (Sorry if it's a bit long):
#------------Startup-------------
display dialog "Social Studies Exchange Trviva Game by Justin Parzik" buttons {"Take the Quiz", "Cyaaaa"} default button 1
set Lolz to (button returned of the result)
if Lolz is "Cyaaaa" then
killapp()
else if Lolz is "Take the Quiz" then
do shell script "say -v samantha Ok starting in 3…2…1…GO!"
#------------Question 1-----------
display dialog "Around age 11, many boys left their fathers to become…" buttons {"Scholars", "Warriors", "Apprentices"}
set A1 to (button returned of the result)
if A1 is "Apprentices" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#----------Question 2--------
display dialog "Most children were taught
to read so that they could understand the…" buttons {"Music of Mozart", "Bible", "art of cooking"}
set A2 to (button returned of the result)
if A2 is "Bible" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#------------Question 3---------
display dialog "In the 1730s and 1740s, a religious movement called the_______swept through the colonies." buttons {"Glorius Revolution", "Great Awakening", "The Enlightenment"}
set A3 to (button returned of the result)
if A3 is "Great Awakening" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#-----------Question 4--------
display dialog "_______ was
a famous American Enlightenment figure." buttons {"Ben Franklin", "George Washington", "Jesus"}
set A4 to (button returned of the result)
if A4 is "Ben Franklin" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#----------Question 5-------
display dialog "______ ownership gave colonists political rights as well as prosperity." buttons {"Land", "Dog", "Slave"}
set A5 to (button returned of the result)
if A5 is "Land" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#---------Question 6--------
display dialog "The first step toward guaranteeing these rights came in 1215. That
year, a group of English noblemen forced King John to accept the…" buttons {"Declaration of Independence", "Magna Carta", "Constitution"}
set A6 to (button returned of the result)
if A6 is "Magna Carta" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#----------Question 7--------
display dialog "England's cheif lawmaking body was" buttons {"the Senate", "Parliament", "King George"}
set A7 to (button returned of the result)
if A7 is "Parliament" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#--------Question 8-----
display dialog "Pariliament decided to overthrow _______ for not respecting their rights" buttons {"King James II", "King George", "King Elizabeth"}
set A8 to (button returned of the result)
if A8 is "King James II" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#--------Question 9------
display dialog "Parliament named ___ and ___ as England's new monarchs in something called ____." buttons {"William/Mary/Glorius Revolution", "Adam/Eve/Great Awakening", "Johhny/Mr.Laphalm/Burning of the hand ceremony"}
set A9 to (button returned of the result)
if A9 is "William/Mary/Glorius Revolution" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#---------Question 10-----
display dialog "After accepting the throne William and Mary agreed in 1689 to uphold the English Bill of _____." buttons {"Money", "Colonies", "Rights"}
set A10 to (button returned of the result)
if A10 is "Rights" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#---------Question 11------
display dialog "By the late 1600s French explorers had claimed the ___ River Valey" buttons {"Mississippi", "Ohio", "Hudson"}
set A11 to (button returned of the result)
if A11 is "Ohio" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#------Question 12---------
display dialog "______ was sent to ask the French to leave 'English Land'." buttons {"Johhny Tremain", "George Washington", "Paul Revere"}
set A12 to (button returned of the result)
if A12 is "George Washington" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#---------Question 13-------
display dialog "_____ proposed the Albany Plan of Union" buttons {"George Washingon", "Ben Franklin", "John Hancock"}
set A13 to (button returned of the result)
if A13 is "Ben Franklin" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#--------Question 14------
display dialog "The __________ declared that England owned all of North America east of the Mississippi" buttons {"Proclomation of England", "Treaty of Paris", "Pontiac Treaty"}
set A14 to (button returned of the result)
if A14 is "" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#-------Question 15-------
display dialog "Braddock was sent to New England so he could ______" buttons {"Command an attack against French", "Scalp the French", "Kill the colonists"}
set A15 to (button returned of the result)
if A15 is "Command an attack against French" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#------TheLolQuestion-----
display dialog "____ is the name of the teacher who runs this class." buttons {"Mr.White", "Mr.John", "Paul Revere"} default button 1
set LOOL to (button returned of the result)
if LOOL is "Mr.White" then
do shell script "say -v samantha Congratulations…you…have…common…sense"
else
do shell script "say -v alex Do…you…have…eyes?"
#------END------
display dialog "I hope you enjoyed the quiz!" buttons {"I did!", "It was horrible"}
set endmenu to (button returned of the result)
if endmenu is "I did!" then
do shell script "say -v samantha Your awesome"
else
do shell script "say -v alex Go outside and run a lap"
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end ifUse code such as:
display dialog "Around age 11, many boys left their fathers to become…" buttons {"Scholars", "Warriors", "Apprentices"}
set A1 to (button returned of the result)
if A1 is "Apprentices" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
return
end if
#----------Question 2--------
display dialog "Most children were taught to read so that they could understand the…" buttons {"Music of Mozart", "Bible", "art of cooking"}
set A2 to (button returned of the result)
if A2 is "Bible" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
return
end if
(90444) -
Need clarification on select query Urgent!!!!!
Hi ,
i want clarification about this query , because i want improve performence to report in ST05 it is showing 1,40,250 time so i need to do some thing on this please any body help me out.
SELECT matnr werks dispo
FROM marc
INTO TABLE it_marc
WHERE matnr IN s_matnr AND
werks IN s_werks AND
dispo EQ p_dispo.
DESCRIBE TABLE it_marc LINES w_lines.
IF w_lines IS INITIAL.
MESSAGE e518(zv) WITH p_dispo.
ENDIF.
ENDIF.
thanks,
murali.SELECT matnr
FROM mara
INTO TABLE it_mara
WHERE matnr IN s_matnr.
IF sy-subrc eq 0.
SELECT matnr werks dispo
FROM marc
INTO TABLE it_marc
FOR ALL ENTRIES IN it_mara
WHERE matnr = it_mara-matnr
AND werks IN s_werks
AND dispo EQ p_dispo.
DESCRIBE TABLE it_marc LINES w_lines.
IF w_lines IS INITIAL.
MESSAGE e518(zv) WITH p_dispo.
ENDIF.
ENDIF.
I am sorry, but I comment also bad recommendations, if I find any. And the above example such
a bad recommendation.
SELECT matnr
FROM mara
INTO TABLE it_mara
WHERE matnr IN s_matnr.
The first select selects much more than you really need, while there is only a select single necessary.
DESCRIBE TABLE it_marc LINES w_lines.
IF w_lines IS INITIAL.
It is also not necessary to count 1000 of lines, if you want to know whether there was at least one records, a check
of a sy-subrc is much better. This should also be done in the original coding.
As said above, check what is in s_matnr and s_werks and what is suppossed to come back.
Siegfried -
Need clarification on Bigfile Tablespaces
In the following Oracle Documentation Lirbary PDF,
Oracle® Database
Concepts
10g Release 2 (10.2)
B14220-02
October 2005
section
Overview of Tablespaces
Bigfile Tablespaces (page: 3-5)
it says,
Benefits of Bigfile Tablespaces
* Bigfile tablespaces can significantly increase the storage capacity of an Oracle database. Smallfile tablespaces can contain up to 1024 files, but bigfile tablespaces contain only one file that can be 1024 times larger than a smallfile tablespace. The total tablespace capacity is the same for smallfile tablespaces and bigfile tablespaces. However, because there is a limit of 64K database for each database, a database can contain 1024 times more bigfile tablespaces than smallfile tablespaces, so bigfile tablespaces increase the total database capacity by 3 orders of magnitude. In other words, 8 exabytes is the maximum size of the Oracle database when bigfile tablespaces are used with the maximum block size (32k).
I need clarification on how to arrive at 8 exabytes ?
1024 x 32k x 64,000 ??
According to the exerpt above, there's no mention of maximum number of Operating System blocks per extent. Unless this was assumed knowledge ... how do I get 8 exabytes ?
And if "a database can contain 1024 times more bigfile tablespaces than smallfile tablespaces", then what's the upper limit on smallfile tablespaces ? -- was this sentence referring to the number of datafiles per smallfile tablespace ? ...
O_o
Thanks !
Message was edited by:
mvanleHi,
According to [url http://download-west.oracle.com/docs/cd/B19306_01/server.102/b14237/limits002.htm#i287915]Physical Database Limits page, a bigfile tablespace contains only one datafile or tempfile, which can contain up to approximately 4 billion ( 232 ) blocks. The maximum size of the single datafile or tempfile is 128 terabytes (TB) for a tablespace with 32K blocks and 32TB for a tablespace with 8K blocks. In resume, A bigfile tablespace is a tablespace containing a single datafile that can be as large as 128 terabytes (TB), depending on the block size of the tablespace. In conjunction with setting the initialization parameter DB_FILES to the maximum value of 65,635 the total size of the database can be more than 8 exabytes (EB)
>>how do I get 8 exabytes ?
You can calculate the maximum amount of space (M) in a single Oracle database as the maximum number of datafiles (D) multiplied by the maximum number of blocks per datafile (F) multiplied by the tablespace block size (B):
M = D * F * B. Therefore, the maximum database size, given the maximum block size and the maximum number of datafiles, is:
65,535 datafiles * 4,294,967,296 blocks per datafile * 32,768 block size = 9,223,231,299,366,420,480 = 8EB.Cheers
Legatti -
BPM, Workflow and Netweaver - Need Clarification
Hi Guru,
I am new to workflow, BPM and Netweaver. I have several questions about those concepts.
1. What is/are the different between workflow and webflow. Which scenario should take workflow into consideration? Which scenario webflow can be applied to?
2. What is/are the different between workflow and BPM. If I am going to implement workflow in a company, do I need to implement business workflow as well as BPM?
3. I need clarification on Netweaver platform and concept.
4. What is/are the different between workflow in R/3 and workflow under Netweaver?
5. If I am going to implement workflow integrated with R/3 and Outlook email, do I need to buy new wrokflow for Netweaver and Netweaver platform or alternatively, I can use business workflow module under R/3 system?
Sorry for many questions asked. I am new to those products. I am now working on software selection for workflow technology. My company is going to implement new workflow to client. Thank you very much.
Cheers,Please ask only one (or closely related) questions per thread. This makes it a lot easier to get a good structure in the database of previously answered questions. While we are on the subject of previously answered questions, I think you should have a look at them....
My suggestion is therefore:
1. Close this thread
2. Read the Frequently Answered Questions. Before you ask (here are many workflow answers)
3. Search the forum.
4. Create new threads if you have questions afterwards. -
Need clarification for these names, R/3, WAS, NetWeaver
Hi All
I posted the question on WAS preview installation, then I realized I should have put it here. Here is the link to that post:
Need clarification for these names, R/3, WAS, NetWeaver
Thanks again for any input
Xueqing
Added the link to the first post
Message was edited by: xueqing HanHi Xueqing,
First of all, sorry for any confusion that we have caused you. I hope I can give you an answer that will clear up the confusion. Sorry, but it is a long explanation of the development of two application solution but history tends to be very long winded!
It is <b>not</b> true SAP R/3 Enterprise equals SAP Web AS, and I'll hopefully explain why:
In the beginning (at least in the client server world) SAP only ship SAP R/3. The technology layer under SAP R/3 was called SAP Basis. There was only SAP Basis under SAP R/3.
SAP then started to deliver other software solutions that were not included in or built on the SAP R/3 software. These included SAP Business Information Warehouse, SAP APO, SAP SEM, SAP CRM, and the list goes on.
These solutions needed to run on technology layer (like SAP R/3 did). SAP Basis was the obvious choice for this because of the common technology layer providing DB/OS abstraction and a coding environment.
<b>~2001:</b>
Later there came the need to have SAP Basis support the web and its web standards and other programming languages. This radically changed what SAP Basis was and we decided to rename the new technology layer to SAP Web Application Server (SAP Web AS). So the SAP Basis name was retired and SAP Basis 4.6D was the last release called SAP Basis.
The new release and the "technology change" means that all the applications mentioned above now ran on SAP Web AS. The first release of SAP Web AS was 6.10.
<b>~2002:</b>
SAP Web AS was first used in SAP R/3 Enterprise release .
The important fact is that SAP R/3 Enterprise runs on SAP Web AS. SAP R/3 Enterprise = SAP R/3 business applications + new business functions + SAP Web AS.
<b>~2003:</b>
I hope the above explanation is clear, because technology takes another major change. It was realized that SAP now had a collection of business solutions/applications (SAP R/3, mySAP CRM, mySAP SCM, etc) and a collection of technology solutions (SAP Web AS, SAP BW, SAP EP, etc). The technology requirements for the business solutions did not end at SAP Web AS, they needed portal, data warehouse, knowledge management capabilities, etc to develop business solutions on.
To address this SAP made the decision to combine all the technology solutions and tools into one single platform. This made complete sense for developers (SAP, Partners and customers). This single platform is called SAP NetWeaver. It includes all the old individual components of SAP Web AS, SAP BW, SAP KM, SAP EP, etc).
<b>~2004:</b>
I think you can guess what the next step is. Yes, the new release of SAP R/3. Since the release of SAP R/3 Enterprise and the release of SAP NetWeaver, SAP R/3's name changes. It is now called mySAP ERP as it includes a lot of applications that were previously sold separately (like SAP SEM, MSS, ESS, etc).
So now mySAP ERP runs on SAP NetWeaver (yes everything that was in SAP Basis and then in SAP Web AS is still there but SAP NetWeaver has so much more now).
Also with the release of SAP NetWeaver, SAP starts to stop using the old technology component names - you will not hear us talk about SAP Web AS, SAP BW, etc anymore, just SAP NetWeaver releases.
In addition all the other SAP business applications also run on SAP NetWeaver, so the latest version of mySAP CRM, mySAP SRM, and mySAP SCM all run on SAP NetWeaver.
So to simplify the explanation, it would be :
<b>Evolution of SAP R/3:</b>
SAP R/3 (up to release 4.6c) -> SAP R/3 Enterprise (releases 1.00 through 2.00 -> mySAP ERP (2004 onward)
<b>Evolution of Basis:</b>
SAP Basis (up to release 4.6d) -> SAP Web AS (up to release 6.40 which was included in SAP NetWeaver '04) -> SAP NetWeaver (2004 onward)
SAP NetWeaver and mySAP ERP have <u>their own release cycles</u>. mySAP ERP always has an underlying technology release that it is built on (this is a SAP NetWeaver release)
I hope this helps,
Mike.
<b></b> -
Need clarification regarding the test cable-diagnostics tdr command
Hello,
I've read about the test cable-diagnostics tdr command but I need clarification on the examples listed below to make sure that I am providing the right answer to my co-workers.
Example 1:
CXXX7SW17#show cable-diagnostic tdr int g0/20
TDR test last run on: July 16 10:23:00
Interface Speed Local pair Pair length Remote pair Pair status
Gi0/20 auto Pair A N/A N/A Normal
Pair B 72 +/- 10 meters N/A Open
Pair C 75 +/- 10 meters N/A Short/Crosstalk
Pair D 74 +/- 10 meters N/A Short/Crosstalk
Does this example mean that there's a cable length issue in the line which is causing the device that it's connected to not to work properly?
Example 2:
CXXX2SW140#show cable-diagnostics tdr int g0/21
TDR test last run on: July 16 09:16:22
Interface Speed Local pair Pair length Remote pair Pair status
Gi0/21 100M Pair A N/A Pair A Normal
Pair B N/A Pair B Normal
Pair C N/A Pair C Normal
Pair D N/A Pair D Normal
Does this example state that the cable line is okay for use?
Example 3:
CXXX1SW19#show cable-diagnostics tdr int g0/22
TDR test last run on: July 16 06:36:53
Interface Speed Local pair Pair length Remote pair Pair status
Gi0/22 auto Pair A 1 +/- 10 meters N/A Open
Pair B 39 +/- 10 meters N/A Open
Pair C 72 +/- 10 meters N/A Open
Pair D 1 +/- 10 meters N/A Open
Does this example mean that there isn't a device connected on the other end? No pin-contact?
Thank you very much for any help you could provide.
SI found this article here at supportforums that seemed like the best explanation I've read so far for TDR info.
Hope that helps. -
Message "not downloaded from server. You need to take this account online
After upgrading to 10.4.9, when I click on any of the old emails in my inbox I get the message "this message not downloaded from server. You need to take this account online in order to download it."
I can still read all email in any other mailbox.
I can read all email received after upgrading.
I appreciate any help.
G4 17 inch Mac OS X (10.4.9) 1 gb ramYou upgraded to 10.4.9 from what?
If you upgraded from Mac OS X 10.3 or earlier, the problem is that the conversion from Mail 1.x to Mail 2.x is broken. Take a look at the following thread to better understand the problem:
Help! "You need to take this account online in order to download it."
More specifically, if this is a POP account, the following procedure should allow you to fix the Inbox problem. A similar procedure should allow you to fix other mailboxes that might also be affected:
1. Quit Mail if it’s running.
2. Make a backup copy of the ~/Library/Mail folder, just in case something goes wrong while trying to fix the problem. You can do this in the Finder by dragging the folder to the Desktop while holding the Option (Alt) key down, for example. This is where all your mail is stored.
3. Create a new folder on the Desktop and name it however you wish (e.g. Inbox Old). It doesn’t need to have an .mbox extension.
4. In the Finder, go to ~/Library/Mail/POP-username@mailserver/INBOX.mbox/.
5. Move the files mbox and Incoming_Mail out of INBOX.mbox, into the Inbox Old folder just created on the Desktop. These files contain all the messages that were in the mailbox before the upgrade to Tiger, and maybe even some messages that had been deleted. mbox is the most important. Incoming_Mail may or may not be present.
6. Move any strangely-named Messages-T0x... folders to the Desktop (not into the Inbox Old folder). These folders are to be deleted after fixing the problem. They are temporary folders created during an import or an indexing process, and Mail should have deleted them when done. Their presence is a clear indication that something didn’t work as expected. If you’ve been using Mail after the conversion and have already tried to fix the problem by rebuilding the mailbox or something like that, they might contain messages that are neither in Messages proper nor in the mbox file, so keep them around until the problem is fixed.
7. Move everything else within INBOX.mbox, except the Messages folder, to the Trash.
The result of the above should be that INBOX.mbox contains the proper Messages folder only, and the Inbox Old folder on the Desktop contains the mbox and Incoming_Mail (if it exists) files only. Now, proceed as follows:
8. Open Mail.
9. The account’s Inbox should properly display in Mail as many messages as *.emlx files are in ~/Library/Mail/POP-username@mailserver/INBOX.mbox/Messages/. If that’s not the case, select the mailbox in Mail and do Mailbox > Rebuild.
10. In Mail, do File > Import Mailboxes, choose Other as the data format, and follow the instructions to import the Inbox Old folder that’s on the Desktop.
As a result of doing the above, some messages may be duplicated now. Andreas Amann’s Mail Scripts has a Remove Duplicates script that you may find useful.
Do with the imported mail whatever you wish. You may move the messages anywhere you want and get rid of the imported mailboxes afterwards.
If all is well and you don’t miss anything, the files on the Desktop can be deleted, although you may want to keep them for a while, just in case.
Take a look at the following article (also referenced in the thread I mentioned at the beginning of this post) to learn what you might have done before upgrading to minimize the risk of this happening, and what you may do after fixing the problem to avoid similar issues from happening in the future. DON’T do now what the article suggests, though, as that would make things worse in the current situation:
Overstuffed mailbox is unexpectedly empty
Ask for any clarifications or if you need further assistance.
Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder, i.e. ~/Library is the Library folder within the user’s home folder. -
Adobe Creative Cloud is needed to resolve this problem. However, it is missing or damaged
Creative Cloud will not run without throwing up a window "Adobe Creative Cloud is needed to resolve this problem. However, it is missing or damaged. Please download and install a new copy of the Creative Cloud". I download the app and run the installer, and it simply throws up the same window over again... "Adobe Creative Cloud is needed to resolve this problem. However, it is missing or damaged. Please download and install a new copy of the Creative Cloud". I'm stuck in a loop! Can someone help me urgently please? I'm on system 10.9.5
Hi tiff_meek,
You can try the steps:
For Mac
Go to Applications-->Utilities-->Adobe Installers.
Uninstall Adobe Creative Cloud.
** If it says application is running in the background then open Activity Monitor and close the process of Creative cloud.
Once the creative cloud is uninstalled then follow the below mentioned steps:
Please go to Library
1. Click on Finder then Click on Go and Go to folder
2. Type /Library and click on Go
3. Go to Application Support and Adobe and then delete OOBE folder.
4. Redo Step 1
5. Type ~/Library and click on Go
6. Go to Application Support and Adobe and then delete OOBE folder.
7. Go to https://creative.adobe.com/products/creative-cloud?promoid=KLYVF
Download Adobe Creative cloud, Install it.
If the above steps do not work. Try enabling root user account and then try to open Adobe Creative cloud.
Enable root user: Enabling and using the "root" user in Mac OS X
Thanks,
Nikhil Gupta -
I need to connect my iPad to a projector and have USB ports. What do I need to do this and where can I get the suitable fittings? I really need to have more than one USB connection port. Help
You can connect via a cable or wireless using an Apple TV.
http://ipad.about.com/od/iPad_Guide/a/How-To-Connect-Your-Ipad-To-Your-Tv.htm
Connect an iPad to a Television or Projector
http://www.everymac.com/systems/apple/ipad/ipad-faq/how-to-connect-ipad-to-tv-te levision-projector.html
Connecting iPad iPhone or iPod to TV or Projector
http://www.disabled-world.com/assistivedevices/computer/ipad-tv.php
iPad Accessories: Connections for a TV or Projector
http://www.dummies.com/how-to/content/ipad-accessories-connections-for-a-tv-or-p rojector.html
You may be interested in AirPlay on the Apple TV:
http://www.apple.com/airplay/
Alternately, there are Apple Digital AV Adapters for hardwired connections:
http://support.apple.com/kb/ht4108
If your location does’t have wifi to use with the Apple TV, use a portable router.
Portable routers http://compnetworking.about.com/od/routers/tp/travel_routers.htm
Cheers, Tom -
My Mac was updated to Ÿosemite OS and since then the PS5 software doesn't open. I need help on this subject please.
They error message I get is "An unexpected and unrecoverable problem has occurred. Photoshop will now exit."
This only started after I upgraded my OS to Yosemite.The upgrade has been know to break Photoshop CS5 installs. An Uninstall/Reinstall may be necessary.
-
I have a new laptop and want to access my itunes library but can't as I need to authorise this computer. Anyone know how to do that?
Press CTRL+B to enable the menu bar.
tt2 -
I need to know which update(s) I can apply to help stabalize the system.
Typing the body of the thread message in the title, huh? -)
I am working on a MacBook Pro (13-inch, Mid 2009) with boot camp running Windows 7 pro 64-bit. Windows crashes quite often now-a-days and I need to get this fixed. I heard that updating boot camp can help. Currently I am running Version 3.0.4 (322).
Only Apple could hamstring and tie Mac OS to Windows. There isn't any other than whether you can download the drivers into Windows (you can) but Apple puts a block on the installer setup even if your mac does not support it.
Windows 7 needs at least Boot Camp 3.1 and 3.3 is what you should already have. And you are not getting security updates if you don't have at least 10.6.8 as was pointed out. --- you arent using Software Update as you should. And you should backup and clone Mac (and Windows) as well.
You need Mountain Lion to use Boot Camp 5.x which supports Windows 7 & 8 and 64-bit.
I would upgrade to Lion if you can realizing that Rosetta and PowerPC are no longer supported though.
Mac 101: Using Windows on your Mac via Boot Camp
https://support.apple.com/kb/HT1461
http://www.apple.com/support/bootcamp/
Helpful Apple Support Resources (Forum Overview)
Boot Camp Support
Boot Camp Manuals
Boot Camp 5.0 Drivers
http://support.apple.com/kb/DL1638
Frequently asked question
http://support.apple.com/kb/HT4818
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.6.pdf
http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.6.pdfcreate a Windows support software (drivers) CD or USB storage media
http://support.apple.com/kb/HT4407
The Boot Camp Assistant can burn Boot Camp software (drivers) to a DVD or copy it to a USB storage device, such as a flash drive or hard drive. These are the only media you can use to install Boot Camp software.
https://support.apple.com/kb/HT4569
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.8.pdf
Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
http://www.apple.com/support/bootcamp/
Is there a download of the Boot Camp 5 Support Software if I'm not using OS X Mountain Lion v10.8.3?
Yes, you can download the Boot Camp 5 Support Software here.
http://support.apple.com/kb/DL1638
How do I use the Boot Camp 5 Support Software I downloaded from the web page?
The download file is a .zip file. Double click it to uncompress it.
Double-click the Boot Camp disk image.
Copy the Boot Camp and "$WinPEDriver$" folders to the root level of a USB flash drive or hard drive that is formatted with the FAT file system (see question below for steps on how to format).
Install Windows, leaving the flash or hard drive attached to the USB port of your Mac.
Installation of the drivers can take a few minutes. Don't interrupt the installation process. A completion dialog box will appear when everything is installed. Click Finish when the dialog appears.
When your system restarts your Windows 8 installation is done.
Note: If the flash drive or hard drive was not attached when you installed Windows and was inserted after restarting into Windows 8, double-click the Boot Camp folder, then locate and double click the "setup.exe" file to start the installation of the Boot Camp 5 Support Software.
How do I format USB media to the FAT file system?
Use Disk Utility to format a disk to use with a Windows computer. Here's how:
Important: Formatting a disk erases all the files on it. Copy any files you want to save to another disk before formatting the disk.
Open Disk Utility.
Select the disk you want to format for use with Windows computers.
Click Erase, and choose one of the following from the Format pop-up menu:
If the size of the disk is 32 GB or less, choose MS-DOS (FAT).
If the size of the disk is over 32 GB, choose ExFAT.
Type a name for the disk. The maximum length is 11 characters.
Click the Erase button and then click Erase again.
Which versions of Windows are supported with Boot Camp 5?
64-bit versions of Windows 8 and Windows 7 are supported using the Boot Camp 5 Support Software. If you need to use a 32-bit version, you need to use Boot Camp 4 Support Software, and you must use Windows 7. 32-bit versions of Windows 8 are not supported via Boot Camp. For a complete list of Windows OS support, click here. -
how do i associate a different apple ID with my ipad? I need to do this bc my gmail account was hacked and a hoax email sent out from it. so i opened a new gmail account and want to associate this new email with my ipad
To check if you have a virus, you can download ClamXav
also, go to Applications>Utilities>Activity Monitor and see if there's anything that you don't recognize, and check your sent email to see if you've been sending emails without your knowledge.
Maybe you are looking for
-
How does one get rid of opaque strip?
I cannot begin to express how much I hate this so-called "improvement". How does one rid the screen of the tiresome opaque strip at the bottom? As to the new icons, Apple seem to have employed an incompetent child to design them.
-
How to switch from Regular CC Membership to Educational Membership
I've been a member for about a year and a half paying full price for the CC membership, however I'd like to switch to the student CC plan. I'm Homeschooled, we previously bought Adobe CS5 with an educational discount after providing proof via a lette
-
JAAS implementation vs. ACL implementation
Hello friends. I'm wondering if I can get some general advice on what I should be pursuing for a security implementation. We have a web application (STRUTS/Hibernate/Tomcat) that will have an increasing need for more complicated rules governing who c
-
Skype for Windows 8 will not work
Hi. I have a HP laptop with Windows 8 already installed. It'When I first got the laptop my skype worked fine but a few weeks ago I logged out and it won't work. This message appears everytime I try to log in: "Ooops... there was a problem. Please res
-
Texting bill at 20 Cents a text is a TOTAL INSULT
For many years, my wife and I pay about $96 a month - $1152 a year to carry Verizon cellphones on a Retiree / Senior Plan (with a government discount - I do lots of volunteering). ALMOST ALL CELL CARRIES OFFER FREE TEXTING AS PART OF THEIR PACKAGES