I NEED HELP My cellular data is not working! I called and went to Apple INC. And At

So after July 4th 2013 I experienced wi-fi problems. I wasn't able to keep connected and i kept getting kicked out my own wi-fi. I left it continue a while because i thought it was only temporary. But i noticed my cellular data with at&t hadn't been working properly for about a month. Then it started getting worse till the point now I cannot use nor wi-fi nor cellular data. I called Apple Inc., they thought it was a bug, and we took procedures for trying to fix it. We restarted it, and reset network settings. Finally they suggested calling or going into at&t. I called first and we did almost same exact procedures as apple. So I decided going into At&t, they changed my original sim card and was only recieving 1 bar of signal, but i was bad. I couldn't do anything. After they scheduled and appointment at Apple store, ugh! which was such bad service. People everywhere and rushed through my problem and he didn't even let me explain. He only suggested I buy their ipad exchaging mine. In which come on. I couldn't back up my photos and stuff that instant. I asked him to give me a minute and he never came back. Like what was the point of that appointmet? After leaving I walked about 2 streets down and all my cellular data bars and 3g were up. It only worked there and when i was driving home and got home nothing once again. Not even inside the store. i mean others wi-fi works in some areas and my cellular data was good until now . I know At&t told me they were not experiencing any technical issues and everything was good, so i know its not due to that. My siste's mini ipad is working fine, so is my sisters ipod. I really need help and someone to take time in reading this and or helping me.Please thanks!

Has any had you try a reset yet? Sometimes the WiFi & Cellular anntennas get wacky.
Hold Sleep/Wak & Home buttons until the screen goes dark and you see the Apple logo

Similar Messages

  • Umm I just got this iPhone 5 and cellular data is not working, can't access apps, heck can't even download any and Safari...ummm yeah not happening.  I'm with Sprint if that makes any difference.

    Umm I just got this iPhone 5 and cellular data is not working, can't access apps, heck can't even download any and Safari...ummm yeah not happening.  I'm with Sprint if that makes any difference.

    Are you in an area where there is no coverage?
    You can try a reset, hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.
    If that doesn't help, then yOu'll need to contact Sprint again.

  • HT1976 my cellular data is not working , how do i fix it

    my cellular data is not working
    when i turn it on it doesnt show
    but ym wirless network works
    i need help.
    thanks

    My cellular data stopped working when i update my iphone 5c to ios7.1 any help please

  • The Restriction option to NOT ALLOW CHANGES to Mobile or Cellular data does not work why is this ?

    The Restriction option to NOT ALLOW CHANGES to Mobile or Cellular data does not work why is this ?

    Hi there,
    You may want to try force closing all open apps and resetting the device as an initial troubleshooting step. Take a look at the articles below for more information.
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    Turn your iOS device off and on (restart) and reset
    http://support.apple.com/kb/ht1430
    Additionally, you may want to try completely disabling and re-enabling restrictions.
    -Griff W.

  • HT2731 I was ask for my secure question and they did not work. So I went into my account and tap on my secure question that I forgot my secure question. It replied back that it just sent me a email. The email never came. I did this three time. My email is

    I was ask for my secure question and they did not work. So I went into my account and tap on my secure question that I forgot my secure question. It replied back that it just sent me a email. The email never came. I did this three time. You have myy email as correct. I have check my account and it show as being correct.

    It's a really bad idea to post your email addresess - it's an invitation to spam - and I've asked the Hosts to remove them.
    This is a user-to-user forum and no-one on here can take any direct action. If your Yahoo address is not working that's something you would need to take up with Yahoo - have you checked it by sending yourself an email to it?
    Otherwise you will need to contact Support: go to https://expresslane.apple.com/ and click on 'iTunes' in the center column and then 'iTunes Store' in the right-hand column and proceed from there.

  • I just updated to ios 6.1 and now my cellular data is not working

    I just updated to ios 6.1 and now my cellular data is not working

    UPDATE: Ok, I just got back from the Apple store and I've performed a full restore. The good news is that the restore did allow cellular data to work again, restoring as new and restoring an iCloud backup both worked fine. I also tried everything Apple suggests on the http://support.apple.com/kb/TS3780 an only restoring had any effect. Even though that worked for me, I went Ahead and went to the Apple store because this problem had already occurred with me, but only intermittently (requiring frequent resets); the 6.1 update seemed to just make it more 'permanent' so to speak. after the tech tested it with a known-good SIM compared to a new iphone 5, he observed the same stalled cellular data, so my iPhone was swapped out. Hope this helps.
    Cheers

  • I have received a replacement iphone 5, updated to ios 7.0.2 and my cellular data will not work.

    is anyone else experiencing network issues after updating to IOS7? I have sprint, and two of my other roommates have sprint as well, and their 3G seems to be working fine( slowly, but functioning). Is there anythnig besides doing network resets and updating the profile by dialing ##873283#-- that I can do to remedy this issue? Certainly a phone of this caliber should have working data, when not on wifi as well.
    Thanks for all the help guys!!
    Michael Finn

    Hopefully you won't have to make a trip to the Apple Store.
    Reset the device:
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't help, tap Settings > General > Reset > Reset All Settings
    If that does not help, restore the software >  iTunes: Restoring iOS software

  • Need help when I sign in not working

    ''locking this thread as duplicate, please continue at [https://support.mozilla.org/en-US/questions/978554 /questions/978554]''
    I did try to follow the update things but could not get that. So how can I get my sign in working?
    XXX
    please help me get my sign in working
    <sub>edit: removed personal information for your protection. (philipp)</sub>

    when I sign in not working. I did try to folow the update but could not get that.
    XXX
    please help me get my sign in working
    <sub>edit: removed personal information for your protection. (philipp)</sub>

  • Need help! my zoom is not working

    Hello everyone!
    I dont know if anyone can help me. My zoom was working fine until last week. Now, when i get in the CAMERA application, i can see the "+" sign in the screen, but the "-" sing just disappear. Can anyone help me? 
    Thank you!
    S.

    maybe your zoom is set to the farthest position ?
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

  • Problems with upgrading my iphone to v6 - I am not happy!  It deleted all of my apps, so I had to reload them.  Now many of the apps do not work - they keep asking for my apple ID and PW but then never open.

    I kept getting reminders to update my iphone to v6, so I did so and I am not happy!  It deleted all of my apps, so then I had to reload them.  Now many of the apps do not work - when I try to open them they keep asking for my apple ID and PW and when I enter this it just goes away and never opens.  Anyone else had this issue?

    Happened to me once awhile back. The exact same thing. What I did to get everything working again was open up itunes on PC and click on "Apps" section (not the one in your iphone section, but the one in the "Libraries" section near the top). Then proceed to totally delete all of the apps that aren't working (if it asks if you want to send to recycle bin click yes). Re-sync phone, which will remove them from the phone. And, finally, re-install them. It was a pain, but the only thing that worked. Hope it works for you. Good luck!

  • Since i have down loaded the new software my wifi does not work I have been to a apple store and they said it is a hard ware issue I do believe it is not my fault has the wifi workded before cheers Ben..

    Since I have down loaded the new software my wifi does not work. I have been to a apple store and they said its a hardware issue. My phone was fine before the down load.

    What is your technical support question for these user to user technical support forums?

  • Help! HTML Data set not working in IE (but in all other browsers)

    Hi there,
    I am totally desperate - I built a master/detail region page using a HTML data set.
    http://www.atcongress.com/programme/continuousLearningByName.html
    It works fine in Firefox/Safari/Chrome/Opera.
    Only IE7 and IE8 give me grief - displaying javascript errors; apparrently it is not able to bind the HTML data table to the data set:
    The IE Javascript Error Console displays "
    'Spry.Data.HTMLDataSet' ist Null oder kein Objekt
    This is in German but you'll get the idea I presume?! Translation would be something like
    'Spry.Data.HTMLDataSet' is Null or not an object"
    Anyway, the source HTML data table uses spry as well. This works fine on all browsers. Maybe because the HTML is on the same page?
    http://www.atcongress.com/programme/continuousLearningTable.html
    Any ideas? Do you need more info?
    Please help - the system needs to go out to test users any day now!
    Andreas
    This is the entire message from the IE8 javascript error console:
    Meldung: 'Spry.Data.HTMLDataSet' ist Null oder kein Objekt Zeile: 30 Zeichen: 1 Code: 0 URI: http://www.atcongress.com/programme/continuousLearningByName.html Meldung: 'Spry.Debug' ist Null oder kein Objekt Zeile: 961 Zeichen: 41 Code: 0 URI: http://www.atcongress.com/_spryAssets/SpryData.js Meldung: 'Spry.Data.initRegionsOnLoad' ist Null oder kein Objekt Zeile: 4855 Zeichen: 65 Code: 0 URI: http://www.atcongress.com/_spryAssets/SpryData.js

    More info on my trial & error process -  error still in this case...
    I cleaned up the code in both the problematic file and the source file that they validate fine now wit the W3C validator:
    http://validator.w3.org/check?uri=http://www.atcongress.com/programme/continuousLearningBy Name.html&charset=(detect+automatically)&doctype=Inline&ss=1&outline=1&group=0&No200=1&ver bose=1&st=1&user-agent=W3C_Validator/1.1
    Data source file:
    http://validator.w3.org/check?uri=http%3A%2F%2Fwww.atcongress.com%2Fprogramme%2Fcontinuous LearningTable.html&charset=%28detect+automatically%29&doctype=Inline&ss=1&outline=1&group= 0&No200=1&verbose=1&st=1&user-agent=W3C_Validator%2F1.1
    I'd also like to mention again that the source html file also contains an HTML data set and spry code. No problems there.
    In  order to make sure that is not a problem of referencing external data I  also tried copying and pasting the source data table into the  problematic file so that it can be used as a local data source. Still  the same.
    Apparently the probem is the master/detail region part.  The working HTML spry file uses a standard HTML table whereas my  problematic one uses a master/detail region
    ANY help would be greatly appreciated!

  • Need Help.. Mighty Mouse not working in Windows & Internet connection prob

    This is my situation.. The new Imac G5, after i installed windows on it. it can detect the mighty mouse but it need a passcode for it. i've tried a few passcode. such as (1111,0000,123456) but it still can't, can someone give me a clue about this situation..?? but the mighty mouse is connected when i'm running mac os X.. n after that i've another problem.. which is the internet connection will disconnect every half an hour when i'm running a windows.. i think that is my internet connection.. but i've already tested the wireless internet connection in my house by using another notebook and it works and not disconnected.. can somebody help me for this problem..?? i will be very happy to hear any solution from you all.. thx a lot before..

    Welcome, you should be posting in the intel forum, I'll ask to have your post moved there. You need to pair your mouse with your computer. Open Bluetooth Setup Assistant and follow the instructions, you will b given a code for the mouse.

  • I NEED HELP!! SOMETHING'S NOT WORKING!

    When I go to a chatrooms or game sites that use java all I get is a box with something in the corner where it should be loading. My java is enabled already checked that out. What should I do?

    Hey Boom,
    The exact way in which you open your Java console depends on the browser and Java virtual machine you're using.
    If you're using IE and the default (Microsoft) JVM, you'll need to go to Tools/Internet Options and click on the Advanced tab. There, you'll find a section titled "Microsoft VM". The first option should be "Java Console Enabled (requires restart)". Check that, close all browsers, and re-launch IE. You'll then be able to select "Java Console" from the "Views" menu from then on (NOTE: this menu option won't appear until you enable the console by performing the first step).
    If you're using Netscape, you're running a Java plug-in. When the plug-in becomes active, the Java icon (the steaming coffee cup) will appear in your system tray (where your clock gets displayed on the task bar). You can just right click on that icon and select "show console". You can also launch the "Java plug-in" control panel (from the Start Menu/Control Panels menu) and click "show Java console").
    Both of these methods assume you're using browser from within Windows. If you're using *nix, you'll probably have to do something closer to the "Netscape" technique, but I can't provide explicit instructions.
    Hope this helps!
    Kreitler

  • S5 updated to Lollipop 5.0, now cellular data does not work

    My Galaxy S5 phone automatically updated to Lollipop 5.0 last night and now I am having connectivity issues using cellular network.  I click on my chrome icon and the internet page comes up.  I type in a web address and it will just keep showing the loading "circle".  Eventually it will time out and exit me back to the home screen.  If the page does load, it only does a partial load.  If I scroll to the bottom of the page where the load ends, it will kick me back out to the home screen or continue to load without actually loading. I have turned the wi-fi off.  I have toggled airplane mode.  I have toggled celluar mode.  I have pulled the battery. I have wiped the cache partition.

    Having the device searching in global mode for a signal can cause the battery to drain more quickly than if it were only looking for the CDMA or LTE networks for voice and data. I would also make sure that the display is set to auto, and that you're only using the vibrate function when you need to in order to make the battery last longer through the day.

Maybe you are looking for