I need help with a complex formula

I am a current student attempting to keep track of requirements for college along with my courses that I am taking. I have two tables. I am trying to put an X in Table2:A2 if the data from Table2:B2 AND Table2:C2 matches Table1:SUBJ AND Table1:CRS. The match in Table1 has to be in the same row since there are duplicates. So a check mark will appear in Table2 once I've taken the class and it shows up in Table1. Does anyone have a equation that would make this work?
Here's a link so you can download the spreadsheet in Numbers '09 and fool around with it.

My error.I was reading "The match in Table1 has to be in the same row since there are duplicates," and overgeneralizing. I was wondering about the "complex formula" part of the request.
Here's another go—with a 'complex' formula, and a couple of 'helper columns.'
Column D on both tables contains a simple formula that combines the subject and course number into a single string.
=B&" "&C
Table 1::Column A contains the more complex formula:
=IFERROR(IF(AND(MATCH(D2,Table 2 :: $D,0)>0,D2<>" "),"✓",""),"")
IFERROR traps the error that occurs when there's no match.
the D<>" " catches the rows where no subject and course number has been entered in the first table.
Descriptions and further examples of the functions used are available in the iWork formulas and Functions User Guide, The guide is downloadable via the Help menu in Numbers.
Regards,
Barry

Similar Messages

I need help with creating some formulas

I'm not sure if anyone around here can help me, but I'm trying to create a Numbers document and need some help with creating a formula/function.
I have a column of amounts and I would like to create a formula which deducts a percentage (11.9%) and puts the result in another column.
If anyone can help me, it would be greatly appreciated.

Here is an example that shows one way to do this:
The original data is in column A. In column B we will store formulas to adjust the amounts:
1) select the cell where you want to formula (in this case cell B2)
2) Type the "=" (equal sign):
3) click cell A2:
4) now type the rest of the formula which is: "*(100-11.9)/100" that is asterisk, then open parenthesis, 100 minus eleven point nine close parenthesis forward slash one hundred
The Asterisk is the multiply operator (times) and the forward slash is the division operator (divide)
now hit return. select cell B2 and hover the cursor over the bottom edge of the cell:
drag the little yellow dot down to "fill" the formula down as needed.

Need help with string field formula

Post Author: dshallah
CA Forum: Formula
What I am trying to accomplish:
The report has item numbers and each item number has the
potential to be associated with up to three u2018binsu2019. So the fields are u2018item
numberu2019, u2018bin1, u2018bin2u2019 and u2018bin3u2019.
I tried to write a u2018if thenu2019 statement that would only show
records that had a value of less than 1 in each u2018binu2019 field. When I try to
write the statement I get a message that says u2018A string is required hereu2019 and
it highlights the number 1 in my statement. I have a feeling itu2019s because the u2018binu2019
fields are string fields and not number fieldsu2026? So I am not sure the proper
procedure to correct this. Thus help is needed and appreciated.
Here is what I wrote:
if {IC_LOC_HIST.BIN_NAME_1} < 1 then
{IC_LOC_HIST.BIN_NAME_1}
What is correct way to write a statement that will show me
the zero values in each column of bin fields?
Thanks!

Post Author: bettername
CA Forum: Formula
You must have a non-numeric value in there somewhere - up in the top left of the formula editor window, it'll show you the variables you've passed to the formula, which should help track down what's going on.
You could try and check that the value is a number first by using something like:
if isnull({IC_LOC_HIST.BIN_NAME_1}) = false and isnumeric({IC_LOC_HIST.BIN_NAME_1}) = false and then "Error - Should be a Number!"
else
if isnumeric({IC_LOC_HIST.BIN_NAME_1}) = true and tonumber({IC_LOC_HIST.BIN_NAME_1})<1 then {IC_LOC_HIST.BIN_NAME_1})

Need help with Crystal Report Formula

IF {GfCnSpSpBio.GfCnSpSpBio_Spouse_ID} > 0 and {GfCnBio.GfCnBio_Key_Indicator} = "I"
Then
{GfCnBio.GfCnBio_Title_1} + " & " + {GfCnSpSpBio.GfCnSpSpBio_Title_1} + {GfCnBio.GfCnBio_Last_Name}
else if {GfCnBio.GfCnBio_Key_Indicator} = "I" Then
{GfCnBio.GfCnBio_Title_1} + {GfCnBio.GfCnBio_Last_Name};
I am trying to code a salutation. If the person is a individual and does nto have a spouse just put in Mr.Jackson. if the person has a spouse put in
Mr & Mrs Jackson. When put this in my report. I get a record with an individual who is not married and it still shows up as
&Stirr.
I am not sure what i am doing wrong in this code.

i would probably add this to your formula
( IF {GfCnSpSpBio.GfCnSpSpBio_Spouse_ID} > 0 and {GfCnBio.GfCnBio_Key_Indicator} = "I"
Then
{GfCnBio.GfCnBio_Title_1} + " & " + {GfCnSpSpBio.GfCnSpSpBio_Title_1} + {GfCnBio.GfCnBio_Last_Name}
else
if {GfCnSpSpBio.GfCnSpSpBio_Spouse_ID} = 0 AND {GfCnBio.GfCnBio_Key_Indicator} = "I" Then
{GfCnBio.GfCnBio_Title_1} + {GfCnBio.GfCnBio_Last_Name});
see if that works for you

Need help with a numbers formula

Hi I am looking for the formula in numbers to do the following apologies if I havn't explained this properly:
if I x is greater than y subtract z
eg
if A2 is greater than 7 subtract 1..... so if A2 was 9 B2 would be 8 but if A2 was 6 B2 would be 6

Hi tick,
As I read your statement, x is the numer in column A, x is a constant placed either in the formula or in a separate cell (not A or B), and z is the result in column B.
This example uses the constant 7, placed in a separate table:
Formula in column B:
=IF(A>Table 2::$A$2,A-1,A)
Here, the constant is written into the formula:
Formula in column B:
=IF(A>7,A-1,A)
Regards,
Barry

Need help with creating a formula for percentages

I am creating a fillable form for subcontractors to submit change requests. One of the sections on the form is for materials. Most subs will charge a markup which is a small percentage of the actual cost. Obviously, both amounts are variables. I want the subs to be able to enter the material cost in field 1, the markup percentage in field two, and then have field three calculate the dollar amount for them. Is this possible? Btw, I'm clueless on this, it's my first attempt at an adobe form. Thanks!!!

A more standard way is to use something like the following as the third field's custom Calculate script:
// Custom calculate script
(function () {
    // Get the field values, as numbers
    var v1 = +getField("price").value;
    var v2 = +getField("markup_percentage").value;
    // Calculate the value of this field
    event.value = v1 * (1 + v2 / 100);
This is assuming that a percentage of 20% is entered by the user as 20, as opposed to 0.2 or something else. Change the field values to match the actual fields in your form.
If the markup field is blank or zero, the total will simply be the same as the price value.

Need help with complex column creation command

Hello, all
I need help with a complex column creation command and SQL anywhere help is not sufficient for it.
Here is the situation:
I need to write a generic DDL "alter table" command, which can add/modify columns without knowing in advance if they already exist in the destination table.
Is there a command, which looks like:
alter table "table1" add (on existing modify) column1 <datatype> <default> ?
Thank you,
Arcady

Hi.
I don't think this is supported in alter table command. But you can code that inside an if statement which queries systables & syscolumns. Your code should be something like that:
if (select count(*) from sysobjects, syscolumns where sysobjects.id = syscolumns.id and sysobjects.name = 'some_table' and syscolumns.name = 'some_column') < 1
begin
alter table some_table add some_column numeric(12) not null
end
This is an example..
Andreas.

Help with writing a formula

Hi all,
I am creating a report, and need help with writing a formula...
I am creating a report that shows how many visits/touches our reps have made to various grade accounts. It is broken down by calendar week, and I currently have a weekly "goal" number set that the reps have to meet. That "goal" number increases each week to keep a running total. (example: week 1: 7, week 2: 14, week 3: 21)
I have created some different formulas and one is this:
SUM("Activity Metrics"."# of Activities" BY Date."Calendar Week")
What this shows me is how many "visits" there are per calendar week to customers, however it show me the total for all reps per week.
What I need is that total to show, but totaled for each rep individually.
What I was trying is this:
SUM("Activity Metrics"."# of Activities" BY Date."Calendar Week") BY Employee."Employee Name"
But...I keep getting an error.
Any suggestions?
I have the reporting book by Lairson, and have been referring to it...but my brain at this point is fried.
Thanks in advance for any help...(please forgive...I am new to OnDemand, and I am sure this is easy)

Thanks for helping!
I created this formula as a column: SUM ("Activity Metrics"."# of Activities" BY Date."Calendar Week"), it is called "total number of visits per week" and it shows the totaled number of visits that all the reps have done per calendar week. For example: Week 1: 10 visits, Week 2: 37 visits, Week 3: 20 visits.
What I would like to do is take that column and break it down further, to show instead how many visits per week by sales rep there have been
So what I was trying was to take the "total number of visits per week" (SUM ("Activity Metrics"."# of Activities" BY Date."Calendar Week")) and use "Activity Owner" (Employee."Employee Name") to break it down further.
What I need to use is the total number of visits each rep has per calendar week.
I think I am getting the error because you can't use "BY" twice in a formula?

Help with difficult numbers formula

I need help with a formula im trying to create in numbers on my iPad. I'll try to explaine the best I can and attach images to help.
Ive created a spreadsheet to do rotas for work. Currently it calculates the shifts each person does and adds it to the total for that persons week in the end column and the total for the day in the bottom row. If the shift is equal to or more than 8 hours long then an hour needs to be deducted as they have a lunch hour that is unpaid for. This is currently done by a hidden row under each persons row that calculates the shift for that person on that day with the given conditions. Also is a 'H' (for holiday), 'RDO' (for requested day off) or 'X' (for unable to work this day) is placed in any of the cells the formular will return value 0. What I am wanting to do is to get rid of all the hidden rows and still have the total calculated in the end column for that person and the day in the bottom row. Is there a way of doing this without having to copy the formula in the hidden cell and adding them in series for each day to achieve the total? I hope this makes sense. Ive attached images to try and help with the explanation.
Thanks in advance

Hi Gary,
I believe that it is generally good practice to choose several smaller formulas over large and complex ones. As you noted in your question you could add your daily IF()s to get the result you want but it would be an unwieldy construction. I also suspect that the daily hours for each employee could be useful info.
I hope things are working out for you.
quinn

Need help with writing a rule

Need help with some rules. I want to book a number to a specific Entity at a Specific Custom 4 only. I don't want this formula to work at all C4 levels. How can this be done?
for example if Entity is "XBM1123" and we use C4 for tracking and the tracking level I want to book it to is IMPORT, how can this be done for a specific account 4400221
I have my formula as
If pov_value = "<Entity Currency>" or pov_value = "<Entity Curr Adjs>" Then
If HS.Entity.Member = "XBM1123" or HS.Custom4.Member = "IMPORT" then
HS.EXP "A#4400221= A#4521111 + A#3526644 + A#635210"
End If
End if
this did not work. I got hte following error
Calculate started.<BR>Error executing VBScript Microsoft VBScript runtime
error, Line 259:Object doesn't support this property or method:
'HS.Custom4.Member'.<BR>Calculate finished.<BR>Error executing
VBScript %0.
I then changed it to the below and it still did not work
If pov_value = "<Entity Currency>" or pov_value = "<Entity Curr Adjs>" Then
If HS.Entity.Member = "XBM1123" then
HS.EXP "A#4400221.C4#IMPORT= A#4521111 + A#3526644 + A#635210"
End If
End if
error
Invalid Custom1 member
specified for this function.
Invalid Destination specified for this function:
A#4400221.C4#IMPORT.

You are close.
Try:
If pov_value = "<Entity Currency>" or pov_value = "<Entity Curr Adjs>" Then
    If HS.Entity.Member = "XBM1123" then
       HS.EXP "A#4400221.C4#IMPORT= A#4521111.C4#IMPORT + A#3526644.C4#IMPORT + A#635210.C4#IMPORT"
    End If
End if
or replace IMPORT with with Top_C4 or what ever member you need to copy to C4#IMPORT.
Rule of thumb, to be on the safe side and for most simple calcs, is if you mention a dimension on the left side, you need to define it on the right side as well.

Project Server 2013: I am using Project Server Permission Mode and need help with permission assignments?

Hi
Project Server 2013: I am using Project Server Permission Mode and need help with permission assignments?
How can I change Permissions for the individual users to see specific projects or all projects in project center and to see specific quick launch items?
For Example: if i have 4 users, A, B, C and D. what i want is:
User A can see everything and act as a project manager or Admin.
User B can view all projects in project centre but can change the schedule or resource assignment etc.
User C can only act as approver of projects and can view all projects in project centre.
User D can only view specific projects for which permissions are given.
can i have some expert help in sorting and understanding permission modes... as i was playing with project server mode permissions and can't figure out how to apply the above scenario to set of my user.
Thanks in Advance
Cheers
AJ
Ajay Kumar

Hi Ajay,
Please refer to this link for detailed explanations about PS2013 security model.
http://technet.microsoft.com/en-us/library/cc197638(v=office.15).aspx
Actually, it will take a couple of days to explain in detail the security model that is a fundamental and tricky aspect of every PS implementation. But basically, you NEVER set permissions for a single user. You have groups in which your insert users. Groups
define "what users can do". Then you associate groups to a corresponding category. Categories define "what user can see". Thus the association of a group with a category will set "what the user can do on the objects he can see". Then, for more advanced security
level, you can use the RBS that will consist in "branches" in which you'll insert users. Based on those branches, you'll customize categories to fine-tune what user can see (for projects and resources) depending on the RBS branch and level.
I'd advice you to start "playing" in a test environment with the default categories/groups that might probably cover your need.
Concerning your 4 users:
user A : add him to the "administrator" group. Be careful that you're mentionning either project manager or administrator, which are 2 groups/categories with totally different permissions level.
user B : basically can see everything and change everything? it could be in the project manager group, assuming that there are no project visibility restrictions on the category via the RBS.
user C : waht do you mean by "approver"? Workflow approvals? Then it will be the portfolio manager group. Task update or timesheet approval? Then it is another long topic: please refer in the documentation to the "status manager" and "timesheet manager"
concepts. There are not related to the security model. In a few words, the status manager is the owner of the project plan, is defined for each task and approves tasks updates. The timesheet manager is an attribute defined for each resource in its parameters
and approves resource timesheet.
user D : you have to define which permission level must be given to this user. Basically it could be a team member that will see only projects he's in the project team. Note that team member cannot interact with the project plan in another way than submitting
timesheets and/or tasks updates which must be approved.
Once more, those are large and complex subjects that require a deep dive into your business model and tons of tests in a test environment.
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS

Need help with Pivoting rows to columns

Hi,
I need help with pivoting rows to columns. I know there are other posts regarding this, but my requirement is more complex and harder. So, please give me a solution for this.
There are two tables say Table 1 and Table 2.
Table1
name address email identifier
x e g 1
f s d 2
h e n 3
k l b 4
Table2
identifier TRno zno bzid
1 T11 z11 b11
1 T12 z12 b12
1 T13 z13 b13
2 T21 z21 b21
2 T22 z22 b22
As you can see the identifier is the column that we use to map the two tables. The output should be like below
output
name address email identifier TRno1 zno1 bzid1 TRno2 zno2 bzid2 TRno3 zno3 bzid3
x e g 1 T11 z11 b11 T12 z12 b12 T13 z13 b13
f s d 2 T21 z21 b21 t22 z22 b22
Also we do not know exactly how many TRno's, zno's, etc each value in the identifier will have. There may be only 1 TRNO, zno and bzid, or there may be four.
All the values must be in separate columns, and not be just comma delimitted. There are also other conditions that i have to add to restrict the data.
So, can you please tell me what is should use to get the data in the required format? We are using Oracle 10g. Please let me know if u need any more information

Something like this ?
SCOTT@orcl> ed
Wrote file afiedt.buf
1 select a.name,
2 a.address,
3 a.email,
4 b.* from (
5 select distinct identifier
6 ,max(trno1) trno1
7 ,max(zno1) zno1
8 ,max(bzid1) bzid1
9 ,max(trno2) trno2
10 ,max(zno2) zno2
11 ,max(bzid2) bzid2
12 ,max(trno3) trno3
13 ,max(zno3) zno3
14 ,max(bzid3) bzid3
15 ,max(trno4) trno4
16 ,max(zno4) zno4
17 ,max(bzid4) bzid4
18 from (select identifier
19 ,decode(rn,1,trno,null) trno1
20 ,decode(rn,1,zno,null) zno1
21 ,decode(rn,1,bzid,null) bzid1
22 ,decode(rn,2,trno,null) trno2
23 ,decode(rn,2,zno,null) zno2
24 ,decode(rn,2,bzid,null) bzid2
25 ,decode(rn,3,trno,null) trno3
26 ,decode(rn,3,zno,null) zno3
27 ,decode(rn,3,bzid,null) bzid3
28 ,decode(rn,4,trno,null) trno4
29 ,decode(rn,4,zno,null) zno4
30 ,decode(rn,4,bzid,null) bzid4
31 from (select identifier,
32 trno,bzid,zno,
33 dense_rank() over(partition by identifier order by trno,rownum) rn
34 from table2)
35 order by identifier)
36 group by identifier) b,table1 a
37* where a.identifier=b.identifier
SCOTT@orcl> /
NAME       ADDRESS    EMAIL      IDENTIFIER TRNO1      ZNO1       BZID1      TRNO2      ZNO2       BZID2      TRNO3      ZNO3       BZID3      TRNO4      ZNO4       BZID4
x          e          g          1          T11        z11        b11        T12        z12        b12        T13        z13        b13
f          s          d          2          T21        z21        b21        T22        z22        b22
SCOTT@orcl> select * from table1;
NAME       ADDRESS    EMAIL      IDENTIFIER
x          e          g          1
f          s          d          2
h          e          n          3
k          l          b          4
SCOTT@orcl> select * from table2;
IDENTIFIER TRNO       ZNO        BZID
1          T11        z11        b11
1          T12        z12        b12
1          T13        z13        b13
2          T21        z21        b21
2          T22        z22        b22
SCOTT@orcl>Regards
Girish Sharma

Need help with a currently "in-use" form we want to switch to Adobes hosting service

Hi, I am in desperate need of help with some issues concerning several forms which we currently use a paid third party (not Adobe) to host and "re-distribute through email"...Somehow I got charged $14.95 for YOUR service, (signed up for a trial, but never used it)..and now I am paying for a year of use of the similar service which Adobe is in control of. I might want to port my form distribution through Adobe in the hopes of reducing the errors, problems and hassles my customers are experiencing when some of them push our "submit button". (and I guess I am familiar with these somewhat from reading what IS available in here, and I also know that, Adobe is working to alleviate some of these " submit" issues, so let's don't start by going backwards, here) I need solutions now for my issues or I can leave it as is, If Adobe's solution will be no better for my end users...
We used FormsCentral to code these forms and it works for the most part (if the end-user can co-operate, and thats iffy, sometimes), but I need help with how to make it go through your servers (and not the third party folks we use now), Not being cruel or racist here, but your over the phone "support techs" are about horrible & I cannot understand them or work with any of them, so I would definitely need someone who speaks English and can understand the nuances of programming these forms, to please contact me back. (Sorry, but both those attributes will be required to be able to help me, so, no "newbie-interns" or first week trainees are gonna cut it).... If you have anyone who fits the bill on those items and would be willing to help us, please contact me back at your earliest convenience. If we have to communicate here, I will do that & I can submit whatever we need to & to whoever we need to.
I need to get this right and working for the majority of my users and on any platform and OS.
You may certainly call me to talk about this, and I have given my number numerous times to your (expletive deleted) time wasting - recording message thingy. So, If it's not available look it up under [email protected]
(and you will probably get right to me, unlike my and I'm sure most other folks', "Adobe phone-in experiences")
Thank You,
Michael Corman
VinylCouture
Phenix City, Alabama 36869

Well, thanks for writing back...just so you know...I started using Adobe products in 1987, ...yeah...back then...like Illustrator 1 & 9" B&W Macs ...John Warnock's Helvetica's....stuff like that...8.5 x 11 LaserWriters...all that good stuff...I still have some of it working on a mac...much of it was stuff I bought. some stuff I did not...I'm not a big fan of this "cloud" thing Adobe has foisted upon the creatives of the world...which I'm sure you can tell...but the functionality and usefulness of your software can not be disputed, so feel free to do whatever we will continue to pay for, ...I am very impressed with CC PS on the 64 bit PC and perhaps I will end up paying you the stipend that you demand for the other services.
So I guess that brings us to our problem.. a few years back and at the height of the recession and near bankruptcy myself, I was damn lucky and hit on something and began a small arts and crafts supply service to sell my products online to a very "niche market" ...I had a unique product and still sell that product (plus others) online...My website is www.vinylcouture.com...Strange? Yes...but there is a market it seems, for everything now, and this is the market I service...Catagorically, these are 99%+ women that use these "adhesive, sticky backed vinyl products" to make different "craft items" that are just way too various and numerous to go into... generally older women, women who are computer illiterate for the most part...and all this is irrelevant to my problem, but I want you to have every bit of background on this and especially the demographic we are dealing with, so we can get right to the meat of the problem.
OK...So about two years ago, I decided to offer a "plain sheet" product of a plain colored "stick back" vinyl... it is available in multiple quantities of packs ( like 5 pieces, 10 pieces, 15 pieces, in a packi & so on)...and if you are still on my site.. go to any "GO RIGHT TO OUR ORDER PAGE" button, scroll down a little...and then to the "PLAIN VINYL" section...you will see the Weebly website order process.) You can back out from here, I think,..but, anyway this product is available in 63 colors + or - a few. So then the problem is, how do they select their individual colors within that (whatever) pack?... .
So my initial idea was to enable a "selection form" for these "colors" that would be transmitted to me via email as 'part" of the "order process".. We tried getting our customers to submit a " a list" ( something my competitiors still do, lol, poor bastards)......but that..is just unbelievable..I can't even begin to tell you what a freakin' nightmare that was...these people cannot even count to 10, much less any higher... figuring out what colors to list and send me... well, lets just say, it wasn't working......I had to figure out a better way...Something had to be done.
So after thinking this all out, and yeah...due to my total ignorance, i figured that we could make a form with Live Cycle Designer (Now Forms Central)...(back then something that was bundled with Adobe Acrobat Pro), I believe, and thats what this thing was authored in... and it would be all good...LOL!
Well not so simple...as you well know, Adobe Acrobat would NOT LET YOU EMAIL anything from itself.....it just wouldn't work (and I know why, and all that hooey), but not being one to take NO for answer,.I started looking for a way to make my little gizmo work.. So I found this company that said they can "hijack" (re-direct actually) the request to email, bypass the wah-wah, and re-transmit it to the proper parties.....for less than $100 a year, I think...its called http://pdf-fillableforms.com/.
A nice gentleman named Joseph Silva helped us program the thing to go to his servers and back out. Please dont hassle them...I need them...for now..it basically does work...try it...you should get back a copy of the form that you filled out...good luck however, if you're on MAC OSX or similar...
I have included a copy of both of our forms (and feel free to fill it out and play with it)...just put test somewhere on it...(and you must include YOUR email or it will balk)..they are supposed to be mostly identical, except one seems to be twice as large....generating a 1.7 meg file upon submission, while the other one only generates a 600K file or so...thats another issue for another day or maybe you can advise on that also...
OK so far so good......In our shop, once Grandma buys a 10 pack (or whatever), Only then she gets to the link on her receipt page ro the relevant "selection form" ,(this prevents "Filling and Sending" with "no order" and "no payment", another early problem we had)... which they can click on and it will usually download and open up on their device if all goes well...Then our little form is supposed to be fillable and is supposed to ADD UP all the quantities, so grandma knows how many she is buying and so forth right on the fly, and even while she changes her mind..., and IT'S LARGE so grandma can see it, and then it TOTALS it all up for them, ( cause remember, they can NOT add).., except there is a programming bug (mouse-click should be a mouse-up probably or something..) which makes you click in the blank spaces to get to a correct TOTAL...about 70-80% of our customers can enable all these features and usually the process completes without problems for them especially on PC's running Windows OS and Acrobat Reader X or XI...at least for most... Unfortunately it is still not the "seamless process" I would like or had envisioned for the other folks out there that do have trouble using our form.... Many folks report to us the following issues that we know of. First of all it takes too much time to load up...We know its HUGE...is there anyway that you can see, to streamline this thing? I would love for it to be more compact...this really helps on the phones and pads as I'm sure you well know.
Some just tell us,"it WON'T work"....I believe this is because they are totally out of it and dont even have Adobe Reader on their machine, & don't know how to get it ( yes, we provide the links).....or it's some ancient version....no one can stop this one...
It almost always generates some kind ( at least one time) of "error message" which we do warn them about..., telling one, basically that "Acrobat doesnt even like this happening at all, and it could be detrimental to ones computer files", blah-blah...(this freaks grandma out really bad)...& usually they end up not even trying to send it... and then I get calls that even you wouldn't believe...& If they DO nut up and push the Red "Submit Form" button, it will usually send the thing to us (and also back to them at the "required email address" they furnished on the form, thats what the folks at the "fillable forms place" do) so, if it's performing it's functions, why it is having to complain?. What are we doing wrong?....and how can I fix it?...Will re-compiling it or saving it as a newer version of "FormsCentral" correct any of these problems ?
Ok, so that should keep you busy for a minute and we can start out with those problems...but the next thing is, how can I take advantage of YOUR re-direct & hosting services?, And will it get rid of the error messages, and the slowness, and the iOS incompatibilities ? (amazingly, the last iOS Reader version worked almost OK.. but the newest version doesnt seem to work with my form on my iphone4) If it will enable any version of the iOS to send my form correctly and more transparently, then it might be worth the money...$14.95 a MONTH you say. hmmmmm...Better be good.
Another problem is, that I really don't need 5000 forms a month submitted. I think its like 70-100 or less....Got any plans for that? Maybe I'm just not BIG ENOUGH to use Adobe's services, however in this case, I really don't care whose I do use as long as the product works most correctly for my customers as well as us. Like I said, If I'm doing the best I can, I won't change anything, and still use the other third party, If Adobe has a better solution, then i'm all for that as well. In the meantime, Thanks for any help you can provide on this...
Michael Corman
VinylCouture.com
(706) 326-7911

Need help with JTextArea and Scrolling

import java.awt.*;
import java.awt.event.*;
import java.text.DecimalFormat;
import javax.swing.*;
public class MORT_RETRY extends JFrame implements ActionListener
private JPanel keypad;
private JPanel buttons;
private JTextField lcdLoanAmt;
private JTextField lcdInterestRate;
private JTextField lcdTerm;
private JTextField lcdMonthlyPmt;
private JTextArea displayArea;
private JButton CalculateBtn;
private JButton ClrBtn;
private JButton CloseBtn;
private JButton Amortize;
private JScrollPane scroll;
private DecimalFormat calcPattern = new DecimalFormat("$###,###.00");
private String[] rateTerm = {"", "7years @ 5.35%", "15years @ 5.5%", "30years @ 5.75%"};
private JComboBox rateTermList;
double interest[] = {5.35, 5.5, 5.75};
int term[] = {7, 15, 30};
double balance, interestAmt, monthlyInterest, monthlyPayment, monPmtInt, monPmtPrin;
int termInMonths, month, termLoop, monthLoop;
public MORT_RETRY()
Container pane = getContentPane();
lcdLoanAmt = new JTextField();
lcdMonthlyPmt = new JTextField();
displayArea = new JTextArea();//DEFINE COMBOBOX AND SCROLL
rateTermList = new JComboBox(rateTerm);
scroll = new JScrollPane(displayArea);
scroll.setSize(600,170);
scroll.setLocation(150,270);//DEFINE BUTTONS
CalculateBtn = new JButton("Calculate");
ClrBtn = new JButton("Clear Fields");
CloseBtn = new JButton("Close");
Amortize = new JButton("Amortize");//DEFINE PANEL(S)
keypad = new JPanel();
buttons = new JPanel();//DEFINE KEYPAD PANEL LAYOUT
keypad.setLayout(new GridLayout( 4, 2, 5, 5));//SET CONTROLS ON KEYPAD PANEL
keypad.add(new JLabel("Loan Amount$ : "));
keypad.add(lcdLoanAmt);
keypad.add(new JLabel("Term of loan and Interest Rate: "));
keypad.add(rateTermList);
keypad.add(new JLabel("Monthly Payment : "));
keypad.add(lcdMonthlyPmt);
lcdMonthlyPmt.setEditable(false);
keypad.add(new JLabel("Amortize Table:"));
keypad.add(displayArea);
displayArea.setEditable(false);//DEFINE BUTTONS PANEL LAYOUT
buttons.setLayout(new GridLayout( 1, 3, 5, 5));//SET CONTROLS ON BUTTONS PANEL
buttons.add(CalculateBtn);
buttons.add(Amortize);
buttons.add(ClrBtn);
buttons.add(CloseBtn);//ADD ACTION LISTENER
CalculateBtn.addActionListener(this);
ClrBtn.addActionListener(this);
CloseBtn.addActionListener(this);
Amortize.addActionListener(this);
rateTermList.addActionListener(this);//ADD PANELS
pane.add(keypad, BorderLayout.NORTH);
pane.add(buttons, BorderLayout.SOUTH);
pane.add(scroll, BorderLayout.CENTER);
addWindowListener( new WindowAdapter()
public void windowClosing(WindowEvent e)
System.exit(0);
public void actionPerformed(ActionEvent e)
String arg = lcdLoanAmt.getText();
int combined = Integer.parseInt(arg);
if (e.getSource() == CalculateBtn)
try
JOptionPane.showMessageDialog(null, "Got try here", "Error", JOptionPane.ERROR_MESSAGE);
catch(NumberFormatException ev)
JOptionPane.showMessageDialog(null, "Got here", "Error", JOptionPane.ERROR_MESSAGE);
if ((e.getSource() == CalculateBtn) && (arg != null))
try{
if ((e.getSource() == CalculateBtn) && (rateTermList.getSelectedIndex() == 1))
monthlyInterest = interest[0] / (12 * 100);
termInMonths = term[0] * 12;
monthlyPayment = combined * (monthlyInterest / (1 - (Math.pow (1 + monthlyInterest, -termInMonths))));
lcdMonthlyPmt.setText(calcPattern.format(monthlyPayment));
if ((e.getSource() == CalculateBtn) && (rateTermList.getSelectedIndex() == 2))
monthlyInterest = interest[1] / (12 * 100);
termInMonths = term[1] * 12;
monthlyPayment = combined * (monthlyInterest / (1 - (Math.pow (1 + monthlyInterest, -termInMonths))));
lcdMonthlyPmt.setText(calcPattern.format(monthlyPayment));
if ((e.getSource() == CalculateBtn) && (rateTermList.getSelectedIndex() == 3))
monthlyInterest = interest[2] / (12 * 100);
termInMonths = term[2] * 12;
monthlyPayment = combined * (monthlyInterest / (1 - (Math.pow (1 + monthlyInterest, -termInMonths))));
lcdMonthlyPmt.setText(calcPattern.format(monthlyPayment));
catch(NumberFormatException ev)
JOptionPane.showMessageDialog(null, "Invalid Entry!\nPlease Try Again", "Error", JOptionPane.ERROR_MESSAGE);
} //IF STATEMENTS FOR AMORTIZATION
if ((e.getSource() == Amortize) && (rateTermList.getSelectedIndex() == 1))
loopy(7, 5.35);
if ((e.getSource() == Amortize) && (rateTermList.getSelectedIndex() == 2))
loopy(15, 5.5);
if ((e.getSource() == Amortize) && (rateTermList.getSelectedIndex() == 3))
loopy(30, 5.75);
if (e.getSource() == ClrBtn)
rateTermList.setSelectedIndex(0);
lcdLoanAmt.setText(null);
lcdMonthlyPmt.setText(null);
displayArea.setText(null);
if (e.getSource() == CloseBtn)
System.exit(0);
private void loopy(int lTerm,double lInterest)
double total, monthly, monthlyrate, monthint, monthprin, balance, lastint, paid;
int amount, months, termloop, monthloop;
String lcd2 = lcdLoanAmt.getText();
amount = Integer.parseInt(lcd2);
termloop = 1;
paid = 0.00;
monthlyrate = lInterest / (12 * 100);
months = lTerm * 12;
monthly = amount *(monthlyrate/(1-Math.pow(1+monthlyrate,-months)));
total = months * monthly;
balance = amount;
while (termloop <= lTerm)
displayArea.setCaretPosition(0);
displayArea.append("\n");
displayArea.append("Year " + termloop + " of " + lTerm + ": payments\n");
displayArea.append("\n");
displayArea.append("Month\tMonthly\tPrinciple\tInterest\tBalance\n");
monthloop = 1;
while (monthloop <= 12)
monthint = balance * monthlyrate;
monthprin = monthly - monthint;
balance -= monthprin;
paid += monthly;
displayArea.setCaretPosition(0);
displayArea.append(monthloop + "\t" + calcPattern.format(monthly) + "\t" + calcPattern.format(monthprin) + "\t");
displayArea.append(calcPattern.format(monthint) + "\t" + calcPattern.format(balance) + "\n");
monthloop ++;
termloop ++;
public static void main(String args[])
MORT_RETRY f = new MORT_RETRY();
f.setTitle("MORTGAGE PAYMENT CALCULATOR");
f.setBounds(600, 600, 500, 500);
f.setLocationRelativeTo(null);
f.setVisible(true);
}need help with displaying the textarea correctly and the scroll bar please.
Message was edited by:
new2this2020

What's the problem you're having ???
PS.

Need help with trim and null function

Hi all,
I need help with a query. I use the trim function to get the first three characters of a string. How do I write my query so if a null value occurs in combination with my trim to say 'Null' in my results?
Thanks

Hi,
Thanks for the reply. What am I doing wrong?
SELECT trim(SUBSTR(AL1.user_data_text,1,3)),NVL
(AL1.user_data_text,'XX')
FROM Table
I want the XX to appear in the same column as the
trim.The main thing you're doing wrong is not formatting your code. The solution may become obvious if you do.
What you're saying is:
SELECT trim ( SUBSTR (AL1.user_data_text, 1, 3))
,       NVL ( AL1.user_data_text, 'XX' )
FROM    Tablewhich makes it clear that you're SELECTing two columns, when you only want to have one.
If you want that column to be exactly like the first column you're currently SELECTing, except that when that column is NULL you want it to be 'XX', then you have to apply NVL to that column, like this:
SELECT NVL ( trim ( SUBSTR (AL1.user_data_text, 1, 3))
            , 'XX'
FROM    Table

I need help with a complex formula

Similar Messages

Maybe you are looking for