I need help with getting an update for my 1st generation ipod shuffle.

I am trying to install iTunes and iPod software on my computer but the iPod cd is apparently not compatible with my version of windows. I need to download an update but I cannot get any support because my 1st generation iPod shuffle is not one of the selections available for support. Does anyone know how I can download the update I need?

Neil, I installed itunes but that hasn't helped the issue I am having with my 1st generation iPod. I have searched and searched but there is nothing that allows me to update my iPod, download to my iPod, all I see is iPhone or iPad, neither of which I happen to own, so I am still at square one with my problem. I can't get any Apple support because my iPod is not one of the choices, no mention of the 1st generation. It's as if it no longer exists and there is no support available. I tried plugging it into my usb port, hoping that something would pop up on the screen and give me guidance, but alas, that failed as well. I feel like this whole thing is an exercise in futility. Thanks for your attempt to assist me.

Similar Messages

Hi i need help with getting my homework for school

im in a nine week class that ends tommorw and need help go\etting my program working properly these are the requirements ofr the assignments:
Modify the Inventory Program by adding a button to the GUI that allows the user to move
to the first item, the previous item, the next item, and the last item in the inventory. If the
first item is displayed and the user clicks on the Previous button, the last item should
display. If the last item is displayed and the user clicks on the Next button, the first item
should display.
· Add a company logo to the GUI using Java graphics classes.
Modify the Inventory Program to include an Add button, a Delete button, and a Modifybutton on the GUI. These buttons should allow the user to perform the corresponding actions on the item name, the number of units in stock, and the price of each unit. An item added to the inventory should have an item number one more than the previous last item. Add a Save button to the GUI that saves the inventory to a C:\data\inventory.dat file. Use exception handling to create the directory and file if necessary. Add a search button to the GUI that allows the user to search for an item in the inventory by the product name. If the product is not found, the GUI should display an appropriate message. If the product is found, the GUI should display that products information in the GUI. Post final .class and .java files as an attachment.
this is what i have there are three java files im puttong in here
first is the panel frame
import java.awt.GridLayout;
import java.awt.BorderLayout;
import java.awt.FlowLayout;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.JButton;
import javax.swing.JLabel;
import java.awt.GridBagLayout;
import java.awt.GridBagConstraints;
import java.awt.Component;
import javax.swing.SwingConstants;
import javax.swing.Icon;
import javax.swing.JComboBox;
import javax.swing.JTextArea;
import javax.swing.JList;
import java.util.*;
import java.text.NumberFormat;
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
import java.net.URL;
import java.io.*;
import java.util.Scanner;
import javax.swing.JOptionPane;
import java.text.NumberFormat;
public class PanelFrame extends JFrame
     private JPanel buttonJPanel; // panel to hold buttons
     private JButton buttons[]; // array of buttons
     private JLabel label1; // JLabel iventory number
     private JLabel label2; // JLabel product name
     private JLabel label3; // JLabel product price
     private JLabel label4; // JLabel product in stock
     private String p_ProductName; // private variable for the employee name.
     private int p_UnitCount; // private variable for the hours worked.
     private double p_UnitPrice; // private variable for the hourly wage.
     private int p_ItemNumber; // private inventory number
     //create inventory object
     Inventory myInventory = new Inventory ();
// no-argument constructor
public PanelFrame()
super( "Panel Demo" );
//Add items to the inventory within the Invntory
          myInventory.addItem(new productinfo(1,"Html a Begginers Guide",14,29.99));
          myInventory.addItem(new productinfo(2,"Html 4 for Dummies",6,29.99));
          myInventory.addItem(new productinfo(3,"Visio Step by Step",7,24.99));
          myInventory.addItem(new productinfo(4,"APA Publication Manual",14,47.99));
          myInventory.addItem(new productinfo(5,"The Gregg Reference Manual",14,37.56));
setLayout( new FlowLayout() ); // set frame layout
// JLabel constructor with a string argument
          label1 = new JLabel( "Inventory Number:%s: %d\n ",p_ItemNumber );
          label1.setToolTipText( "This is Inventory number" );
          add( label1 ); // add label1 to JFrame
          label2 = new JLabel( "\n\nProduct Name: %s: %s\n", p_ProductName);
          label2.setToolTipText( "This is Product Name" );
          add( label2 ); // add label1 to JFrame
          label3 = new JLabel( "\n\nPrice : %s:$%.2f\n",p_UnitPrice );
          label3.setToolTipText( "This is product Price");
          add( label3 ); // add label1 to JFrame
          label4 = new JLabel( "\n\nQuanity %s: %d\n",p_UnitCount);
          label4.setToolTipText( "This is Quanity in stock: " );
          add( label4 ); // add label1 to JFrame
buttons = new JButton[ 4 ]; // create buttons array
buttonJPanel = new JPanel(); // set up panel
buttonJPanel.setLayout( new GridLayout( 1, buttons.length ) );
          String names[] = { "First", "Previous", "Next", "Last" };
          JButton buttons[] = new JButton[ names.length ];
          // create and add buttons
          for ( int count = 0; count < buttons.length; count++ )
          buttons[ count ] = new JButton( names[ count ] );
          buttonJPanel.add( buttons[ count ] ); // add button to panel
          } // end for
// setup the logo for the GUI ...image needs to be in same directory as source code
          URL url = this.getClass().getResource("book103.gif");
          Image img = Toolkit.getDefaultToolkit().getImage(url);
          // scale the image so that it'll fit in the GUI
          Image scaledImage = img.getScaledInstance(100, 100, Image.SCALE_AREA_AVERAGING);
          // create a JLabel with the image as the label's Icon
          Icon logoIcon = new ImageIcon(scaledImage);
          JLabel companyLogoLabel = new JLabel(logoIcon);
          companyLogoLabel.setBorder(BorderFactory.createEmptyBorder(3,3,3,3));
          // add the logo to the GUI
          getContentPane().add(companyLogoLabel, BorderLayout.WEST);
add( buttonJPanel, BorderLayout.SOUTH ); // add panel to JFrame
} // end PanelFrame constructor
} // end class PanelFrame

this is the original part again with the code tag added
import java.awt.GridLayout;
import java.awt.BorderLayout;
import java.awt.FlowLayout;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.JButton;
import javax.swing.JLabel;
import java.awt.GridBagLayout;
import java.awt.GridBagConstraints;
import java.awt.Component;
import javax.swing.SwingConstants;
import javax.swing.Icon;
import javax.swing.JComboBox;
import javax.swing.JTextArea;
import javax.swing.JList;
import java.util.;
import java.text.NumberFormat;
import javax.swing.;
import java.awt.;
import java.awt.event.;
import java.net.URL;
import java.io.*;
import java.util.Scanner;
import javax.swing.JOptionPane;
import java.text.NumberFormat;
public class PanelFrame extends JFrame
private JPanel buttonJPanel; // panel to hold buttons
private JButton buttons[]; // array of buttons
private JLabel label1; // JLabel iventory number
private JLabel label2; // JLabel product name
private JLabel label3; // JLabel product price
private JLabel label4; // JLabel product in stock
private String p_ProductName; // private variable for the employee name.
private int p_UnitCount; // private variable for the hours worked.
private double p_UnitPrice; // private variable for the hourly wage.
private int p_ItemNumber; // private inventory number
//create inventory object
Inventory myInventory = new Inventory ();
// no-argument constructor
public PanelFrame()
super( "Panel Demo" );
//Add items to the inventory within the Invntory
myInventory.addItem(new productinfo(1,"Html a Begginers Guide",14,29.99));
myInventory.addItem(new productinfo(2,"Html 4 for Dummies",6,29.99));
myInventory.addItem(new productinfo(3,"Visio Step by Step",7,24.99));
myInventory.addItem(new productinfo(4,"APA Publication Manual",14,47.99));
myInventory.addItem(new productinfo(5,"The Gregg Reference Manual",14,37.56));
setLayout( new FlowLayout() ); // set frame layout
// JLabel constructor with a string argument
label1 = new JLabel( "Inventory Number:%s: %d\n ",p_ItemNumber );
label1.setToolTipText( "This is Inventory number" );
add( label1 ); // add label1 to JFrame
label2 = new JLabel( "\n\nProduct Name: %s: %s\n", p_ProductName);
label2.setToolTipText( "This is Product Name" );
add( label2 ); // add label1 to JFrame
label3 = new JLabel( "\n\nPrice : %s:$%.2f\n",p_UnitPrice );
label3.setToolTipText( "This is product Price");
add( label3 ); // add label1 to JFrame
label4 = new JLabel( "\n\nQuanity %s: %d\n",p_UnitCount);
label4.setToolTipText( "This is Quanity in stock: " );
add( label4 ); // add label1 to JFrame
buttons = new JButton[ 4 ]; // create buttons array
buttonJPanel = new JPanel(); // set up panel
buttonJPanel.setLayout( new GridLayout( 1, buttons.length ) );
String names[] = { "First", "Previous", "Next", "Last" };
JButton buttons[] = new JButton[ names.length ];
// create and add buttons
for ( int count = 0; count < buttons.length; count++ )
buttons[ count ] = new JButton( names[ count ] );
buttonJPanel.add( buttons[ count ] ); // add button to panel
} // end for
// setup the logo for the GUI ...image needs to be in same directory as source code
URL url = this.getClass().getResource("book103.gif");
Image img = Toolkit.getDefaultToolkit().getImage(url);
// scale the image so that it'll fit in the GUI
Image scaledImage = img.getScaledInstance(100, 100, Image.SCALE_AREA_AVERAGING);
// create a JLabel with the image as the label's Icon
Icon logoIcon = new ImageIcon(scaledImage);
JLabel companyLogoLabel = new JLabel(logoIcon);
companyLogoLabel.setBorder(BorderFactory.createEmptyBorder(3,3,3,3));
// add the logo to the GUI
getContentPane().add(companyLogoLabel, BorderLayout.WEST);
add( buttonJPanel, BorderLayout.SOUTH ); // add panel to JFrame
} // end PanelFrame constructor
} // end class PanelFrame

I think I need help with driver (software) settings for D110a

I think I need help with driver (software) settings for D110a all-in-one
Product: D110a all-in-one
OS: Windows XP Professional
Error messages: None
Changes before problem appeared: None--new installation
The quality of photo images (mostly JPG files) in printouts is awful even though the files display beautifully on the PC screen. I am using
IrfanView software for displaying/printing. As far as I can tell, IrfanView is not the problem.
When I print the same images on a Deskjet 5150 attached to a different PC also running XP Pro and IrfanView, the quality of the printouts is at
least acceptable, Some would probably say good or very good.
It's dificult to explain in words the problem with the printouts. A picture of really pretty vegetables (squashes, tomatoes, watermelon, etc) comes
out much too red. Moreover, the red, which appears shaded on the screen, seems to be all one shade in the D110a printouts.
Something similar happens to a view of a huge tree in full leaf. On screen, there are subtle variations in the "greenness" of the leaves. In the
printout, all green is the same shade. In the same printout, the trunk of the tree is all a single shade of grey. It isn;t even obvious that the
trunk is a round, solid object.
I liken the effect to audio that disappears entirely when you lower the volume and gets clipped into square waves in even moderately loud passages.
I don't know whether the D110a driver software permits adjusting the parameters that appear to be set incorrectly, and if adjustments are possible,
how I would identify which parameters to adjust, how I would access them, or how I would adjust them. I'm hoping that someone can help. Thanks.
I forgot to mention that I have used the diagnostic application and it tells me that there are no problems.
e-mail me at [email protected]

brazzmonkey wrote:
Hi everyone,
I noticed the following message when network starts on my gateway
Warning: This functionality is deprecated.
Please refer to /etc/rc.conf on how to define a single wired
connection, or use a utility such as netcfg.
Then I realized the way network settings should be written in rc.conf has changed. But I can't figure out how this should be done.
Currently, my set up is the following (old way):
INTERFACES=(eth0 eth1)
eth0="dhcp"
eth1="eth1 192.168.0.10 netmask 255.255.255.0 broadcast 192.168.0.255"
ROUTES=(!gateway)
eth0 is on DHCP because the IP is dynamically assigned my ISP.
eth1 has a fix IP because it's on the LAN side.
No problem to use DHCP on eth0 with the new settings.
But for eth1, I don't know what I am supposed to write for gateway.
Wiki isn't clear on that one either, and it looks like many articles still refer to the old way.
Any guidance appreciated, thanks.
brazzmonkey,
you can't define 2 interfaces the old way (even though I saw some tricky workaround somewhere in the forums).
Use, f.e., netcfg:
Comment your old lines.
In /etc/rc.conf insert:
NETWORKS=(Eth0-dhcp Eth1-static)
DAEMONS=(..... !network @net-profiles ....)
In /etc/network.d create 2 files:
First one is named Eth0-dhcp.
Contents:
CONNECTION="ethernet"
DESCRIPTION="Whatever text"
INTERFACE=eth0
HOSTNAME="your hostname"
IP="dhcp"
DHCP_TIMEOUT=15
Second one is named Eth1-static.
Contents:
CONNECTION='ethernet'
DESCRIPTION='whatver'
INTERFACE='eth1'
HOSTNAME='hname'
IP='static'
ADDR='192.168.0.10'
GATEWAY='192.168.0.1' # your gateway IP
DNS=('192.168.0.1') # your DNS server
The names Eth0-dhcp and Eth1-static are not magic. They just must be the same in rc.conf and in /etc/network.d.
Hope it helps.
mektub
PS: netcfg must be installed.
Last edited by Mektub (2011-07-20 14:07:05)

HT4199 I need help with getting my printer to print, PLEASE.

I need help with getting my printer to print, Please.

What have you done so far?
I suggest you connect it via a usb cable first. Once you get the printer working, move to wifi. You will have to use an existing printer usb cable or purchase a cable. Be sure to get the correct cable. Ask for help.
The warrenty indicates there is phone support. Give HP a call.
Warranty
One-year limited hardware warranty; 24-hour, 7 days a week phone support
Robert

Need help with a activation code for Adobe Acrobat X Standard for my PC,, Don't have older version serial numbers, threw programs away, only have Adobe Acrobat X Standard, need a code to unlock program?

Need help with a activation code for Adobe Acrobat X Standard for my PC, Don't have older Version of Adobe Acrobat 9, 8 or 7.

You don't need to install the older version, you only need the serial number from your original purchase. If you don't have them to hand, did you register? If so, they should be in your Adobe account. If not you really need to contact Adobe, though it isn't clear they will be able to do anything without some proof of purchase etc.

I need help with downgradeing my ios for my ipod touch 4th gen

i need help with downgradeing my ios for my ipod touch 4th gen

As has alwys been the case, you cannot go back.
Sorry

HT4946 how do i get a update for my first generaton ipod touch serial number

how do i get a system update for my first generation ipod serial number1c744z7dw4t

The 1G (first generation) iPod can only go to iOS 3.1.3 and you get that here.
Purchasing iOS 3.1 Software Update for iPod touch (1st generation)

How can I find an update for my 1st geation ipod touch to be able to get aps

I am trying to find an update for my 1st generatio ipod touch to allow me to use aps

You can get the last updae for the 1G here:
Purchasing iOS 3.1 Software Update for iPod touch (1st generation)

How do you get apps for the 1st generation iPod touch

How do I get apps for the 1st generation iPod touch?

By updating the iOS on the iPOd. The 1G can go as high as 3.1.3. That works with a lot of apps. But some apps require a higher iOS and/or newer iPod.
Purchasing iOS 3.1 Software Update for iPod touch (1st generation)

Ios 3.1.1 will not download for the 1st generation ipod touch

Why won't ios 3.1.1 download for the 1st generation ipod touch? It will start and then a second later stop.

Does it happen with the apps that came with the iPod?
Does it happen with all apps you have downloaded/installed?
Have you ried deleting the apps and redownload/install the apps? You will not be charged again if you are signed into the same iTunes account that originally purchased the apps.
Next would be to restore from backup
Last would be to restore to factory defaults/new iPod.

Hi like to check where to replace the free iPod nano for the 1st generation ipod

Hi
Like to check where can I replace the free iPod for my 1st generation iPod which can be found in your website. My email address [email protected]
Thank
Steven

Your local Apple Store, MacMall and do a Google search.

[solved]Need help with a bash script for MOC conky artwork.

I need some help with a bash script for displaying artwork from MOC.
Music folders have a file called 'front.jpg' in them, so I need to pull the current directory from MOCP and then display the 'front.jpg' file in conky.
mocp -Q %file
gives me the current file playing, but I need the directory (perhaps some way to use only everything after the last '/'?)
A point in the right direction would be appreciated.
thanks, d
Last edited by dgz (2013-08-29 21:24:28)

Xyne wrote:
You should also quote the variables and output in double quotes to make the code robust, e.g.
filename="$(mocp -Q %file)"
dirname="${filename%/*}"
cp "$dirname"/front.jpg ~/backup/art.jpg
Without the quotes, whitespace will break the code. Even if you don't expect whitespace in any of the paths, it's still good coding practice to include the quotes imo.
thanks for the tip.
here it is, anyhow:
#!/bin/bash
filename=$(mocp -Q %file)
dirname=${filename%/*}
cp ${dirname}/front.jpg ~/backup/art.jpg
then in conky:
$alignr${execi 30 ~/bin/artc}${image ~/backup/art.jpg -s 100x100 -p -3,60}
thanks for the help.
Last edited by dgz (2013-08-29 21:26:32)

I need help with the Security Update 2006-002!

Security update has really screwed up the two systems I've installed it on:
1) My G4 PowerBook refused to reboot after the update, getting only as far as the initialApple screen. Rebooting with a 10.4 install disk and using Disk Utilities to try to repair the disk either results in an "Unable to unmount disk" error, or if Repair does proceed, it is unable to repair the disk. I get a "Invalid node structure" error message, then a "Rebuilding B-Tree" message, then a "The Voluma Macintosh HD could not be repaird" message, and Repair quits with a "Error: the underlying task reported failure on exit" message.
2) On my Dual 2 GHz G5 desktop, Safari appears to be unable to load more than six URL:s in 6 tabs; I read about 20 webcomics all organized in a bookmarks folder, and my usual practice is to select "Open in tabs" to open them all at once. Heretofore Safari has opened all the tabs and all the URLs without a hitch. After the update it will open all the ttabs but only about the first six sites load - all the rest just sit there spinning their wheels.
Also it has hosed iChat on my Dsktop. iChat will open, but will not send or receive chats, and will not open the buddy window.
Also Also, the system frequently hangs, seizing up anywhere from 30 seconds to a few minutes, then resuming normally. Safari seems to be the culprit, but I can't really tell.
I need an update to recover from the effects of the last update.

I'm not very knowledgeable on macs yet being a new user (switcher) However, there appear to have been too many problems for too many people and too many systems associated with this update for it to be co-incidental. Take a look through the topics since the update appeared. My computer is brand new. The update did something that screwed something in the startup file (or whatever) The nice man in India helped me get the computer going by removing all sorts of wonderous things, this after his colleague in Cork had sent me all sorts of stuff to my work address to try out when I got home, like pram and nvram (which only made things worse) and other things. Now my computers fixed. Except that there's now no printer, it won't find the drivers off the install discs and any driver I load from canon isn't recognised or a script isn't recognised. I bought this thing to get away from problems like this on PCs!!!!
iMac Intel 20" Mac OS X (10.4.4)

Need help with "Nokia Software Updater"...Plz

hi
plz help me
every time i try to install
and it gave me this MSG
" Error 2738.Could not access VBScript run time for custom action."
my Lap work with W.vista
and i have N95-8GB
plz i need a help to update my phone

Please do a search on this forum for "6280 software update" and you will have your answer.
Many people have written here about Nokia software updater that tries to flash their 6280 phones with V6.10 (intended for the 6288) and then breaks their phones.
I myself was busy downloading the firmware for a friends 6280 that was just minutes away from being flashed with 6.10 when I came across messages on many sites telling about the issue with the software updater and 6280 phones. I managed to save that 6280 from sure doom.
If you also searched before hand you would not have this trouble.
You need to take the phone to a nokia Service centre to have it flashed now and get it into a working state.

Need help with output type EDI for ERS

All,
I want to be able to run and ERS settlement and have the invoices created sent via EDI/XML to the supplier.   I have several questions on the set up.
1) I have output type ERS6 which is defined as ERS EDI. I assume because it does not start with Z* this is SAP standard, so I shouldn't have to modify any of this.
2) I've added my supplier to this output type.
3) I assume I need to create a partner profile for this supplier? If so can someone tell me the message type to use?
Is there any set up I'm missing in this process?   I've executed ERS but do not get an idoc and I'm fairly certain it's because I haven't done the partner profile set-up.
Thanks for your help.
Sandra

Hi,
You don't have to modify thise setup unless you have any customized requirement.
You are missing partner profile setup.Carry out the setup and run MRRL tcode to create the idocs
Enter the following values using tcode WE20.
Field                                       Value
Message type                         GSVERF
Partner type                             LI (vendor)
Partner function                        LF (vendor)
Port                                         SUBSYSTEM ( Port to your middleware)
Output mode                            such as Collect IDocs
Basic type                                GSVERF01
Application                                 MR
Output type                                ERS6 or the type you have defined
Regards,
Karuna

I need help with getting an update for my 1st generation ipod shuffle.

Similar Messages

Maybe you are looking for