I need more than simple 3D for a video .....

Hi guys,
What else can we use, if simple 3D / perspective is not enough ?
I am in need of squeezing one end of a video so that it looks like you are viewing the video at an angle. Like a perspective view, if you know what I mean. Simple "tilt" doesn't do it, and I don't see any of the advanced perspective features anywhere, that photoshop has available.
thanks for your help,
Dave.

Use After Effects for doing special effects like that.
Cheers
Eddie
PremiereProPedia   (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ

Similar Messages

  • Need more than 90 minutes of continual video

    ,Need more than 90 minutes of continual video? Hi all,
    I'm using the Vado HD [first gen] as a "hidden cam" type of thing for a play that I am filming. I have 2 normal cameras set out in the audience, but I want to mount the Vado HD above the stage for a bird's eye view of a sword fight scene that I can cut to when editing footage. The problem is that the fight scene happens near the end of the play and there are no intermissions.
    Since the filesystem used on the Vado HD is FAT and not NTFS or HFS+, I run into the 4GB limit and the camera simply puts itself to sleep about 45 minutes into recording even though there is more space on the dri've and the battery is fine.
    Can I reformat the Vado HD with HFS+ or NTFS? [i use a Mac but can run windows via VMware Fusion if need be]. Is there any way to squeeze 90 minutes of video in one file on this camera? If I reformat the camera, will it mess it up? [i don't use any of the apps that were installed on the camera - i moved them from the vid camera to my laptop actually, so i don't care about losing anything valuable on the vid camera].
    Thanks for any tips you might have!
    /vjl/

    Could the reason be that you are capturing to an FAT32 format hard drive and it is only allowing you a limited maximum file size? Not sure but I think it is 4GB which would equate to 1/3 of a DV 13GB hour ...or about 20 minutes.
    If that is correct, and you should be able to tell because the capture window will display the file size limit as space available during capture, you could do one of two things:
    * reformat the drive as NTFS which removes the file size limitation (I have just done this on an external drive for exactly the same reason), but do look up online instructions for this and do it carefully.
    * if the material is not long continuous shots of over 20 minutes, switch on Scene Detect during capture; it's wise to cut material up into smaller chunks in any case as huge files become very unwieldy and handling them could slow your machine right down.

  • Need more than 2 states for MSO and rotation to work correct?

    Hi,
    I have a folio with images that I show in zoom mode with a MSO state.
    After finishing the vertical version of the folio I have created a horizontal version with all the same objects.
    I found that the active state stays only the same while rotating when there are more than 3 states?
    Is this a bug?
    Almute

    Sounds like a bug.
    For me too! Could you please report the bug?
    If you’re not cycling through the states you could set a blank state in the MSO that no button would trigger. That way you’d have a third state but nobody would know.
    Yes, I have duplicated the 2nd state (which is the zoomed version of the image) and have no button for this state.
    Now it seams to work.  - But it's much work now because the whole files with 150 pages already had been finished.
    Almute

  • HT4489 I need more space and quota for my iCloud calendar than only 25.000 events or 24 MB.. What should I do..?

    I need more space and quota for my iCloud calendar than only 25.000 events or 24 MB.. What should I do..?

    It can't be expanded.  You'll have to use a different calendar service if iCloud limits aren't enough.

  • Need to maintain more than one address for single customer.

    Dear All,
    I need to maintain more than one address for single customer, Is it possible? If so how can I maitain kindly send the details.
    Rgds
    Srinivasan.K.R.

    Dear Srinivasan,
    I don't think you can maintain the more than one address for single customer as per the standard.
    You can this options
    1.You can create different ship to parties as per the addresses.
    2.You can change the address manually while creating sales order for single customer.
    I hope this will help you,
    Regards,
    Murali.

  • Has anyone used more than one event for one project?

    Hi,
    I have an opinion about Final Cut Pro X that hasn't changed since my first few days with it.  I waited to see if I would get used to it.  But, after a fair amount of time, I still am not comfortable with 'Events' and 'Projects'.  The separation of the media and projects creates more problems than solutions with my workflow.
    The purpose of it was to add flexibility for both the professionals and consumers using it, but my first impressions are still the same.  The new Event and Project system adds complexity to organization and archiving.  I wouldn't write this if it wasn't enough of a hindrance for me, that I encounter constantly.  I think the new Final Cut Pro X is incredible, but this issue is definitely important to me.
    Has anyone out there used more than 1 Event for 1 Project?  Some of us create more than 1 Project for an Event, to make different version of a video, or for brainstorming, or to make a part 1 and part 2 of a video, but I've never had more than 1 Event for 1 Project.  I don't need to use the media from multiple Events for the same Project.  And I've never used it for a reason.  I don't think someone will want to use their Hawaii vacation footage for a Denver vacation project, and a Florida vacation project.  I think we should bring back the connection between Events and Projects in a meaningful way. 
    This is a throw back to the older days, but that's not always a bad thing.  Let us keep our projects, or timelines, in the Events folder.  Make an area above the JPG section, and PNG section, and MOV section, and call it the Projects section.  Then we can easily find our Projects and add a new Project every time we need it, and organize our files quickly - without having to keep track of more windows. Final Cut Pro X is all about being more simplified than other video programs, and I think this goes right along with that idea.
    Thanks,
    - David

    My original fear was that FCPX was just going to be iMovie Pro... It so is not!
    People use the interface in different ways. I think that's what most of us like about it, it's flexibiity to accommodate different types of workflows.  For me, I use the Events browser mostly like I'd be using the Finder. All the imported clips I use are referenced by the hard disks on which they reside. I know where to find them in the Event Browser and I know where to find them in the Finder.  I use a lot of stock footage and therefore *reuse* a lot of stock footage from project to project. I'm not going to re-import duplicates into different events because I don't find that the least bit convenient and I do find it a terrible waste of precious HD real estate.
    But that's me.
    Some people like to load up everything they're going to use in a single project in a single event... I get that. You can command click your way through a bunch of clips, type E and everything is automatically arranged on your storyline in the order you selected the clips. That is *awesome*!! Instant storyline (/timeline.) Furthermore, for those that need to share projects, it's easier to bundle up the events and projects if they're all together (albeit in two different folders) on one disk (— at least they are always at the top level of the drive and easy to find.)
    Keeping your Events media in a different location (satellite drives) and keeping your current project on your *fastest* drive is probably the fastest way to edit (particularly if your satellite drives are Firewire or Thunderbolt [peer-to-peer interfaces don't hog system resources].) There is little cross interference in disk accesses that way. So essentially, you can keep FCPX dealing with original clip data that doesn't need to be quite as fast, reading and writing to slower drives on your system, while letting it plow through the heavy work on your fastest access drive (usually your internal HD.)
    By no means is FCPX "more simplified". It has a huge amount of power. It has all the best parts of Color, Soundtrack Pro and Motion built in. It allows you to explore *ideas* in real time rather than having to plan for them a week in advance [layout, round-tripping plans to Color, STP and/or Motion for titling or effects.]  You can grab and move around elements anywhere on your "palette" with simple mouse moves and an occasional key press. The list goes on. Bottom line, it doesn't matter how you organize your events or your projects. It's all about the finished product. And for me, I can turn that around in about 1/5th the time (not claiming it's great — but I think better results in 20% of the time, on average, than it would have taken in Studio.) [Not a professional video editor -- I'm a graphic designer, and I develop Motion graphics for FCPX to make all "you guys" look better.]

  • Can i create more than one instance for single database?

    HI
    anybody can tell me how to create more than one instance for single database(without using RAC)?
    thanks
    Kalanidhi

    Anandji,
    I sometimes think differently. I also think like what this person is asking..(although I have installed and administering 5 different RAC databases)
    The main doubt of mine is that we create multiple instances accessing the same storage area.
    Anyway the controlfiles of all instances will have the same information except the instance_names and instance id's.
    Hence I always think , why can't it be possible to to create another instance in the same system and point it to a controlfile which is copied from the other instance.
    Why can't the same files be shared between the two instances in a same system ?
    I know I am thinking a little bit confusing...
    Anyway I need to test that also...
    Mahesh.

  • PS CC Says I need more than 512 Vram ...

    I was using Photoshop last night just to prep a couple of photos for class submission (3 pictures, just reducing their size for web consumption), and I got the message stating that I needed more than 512 Megs of Vram, which was odd to me, as I have 1024 Dedicated available on my video card. I don't run a dual monitor setup any longer, but I do have an ASUS PBs278 that's running at 2560 X 1440. My current graphics card is an ATI Radeon 6800 HD, and my windows 7 system is running on 8 gigs of ram. Up till within the last week, CC has worked just fine, but the other day on boot, it took an unusually long time to get into the software. It eventually did, and I'm wondering if that was an update or some such that's now made the software decree that if it doesn't have the 512 it thinks it should have, the 3d functions won't happen. I don't know if it's a consequence of the larger quantity of pixels being pushed, or if it's the video card getting too old to support CC at such a high resolution now, but some help would be amazing.

    Windows 7, 64 bit. I haven't been able to replicate the error, but I have the new drivers as well. I hope this just ends up being a fluke.

  • How, using Adobe Connect can increase the number of participants in the meeting? I need more than 25 people.

    Hi, I use licensed Adobe Connect. Earlier in the meeting could involve up to 100 people. Now only 25. How, using Adobe Connect can increase the number of participants in the meeting? I need more than 25 people.
    Thanks for your help.

    The purchasing option through adobe.com only allows up to 25 attendees. If you need more than that, you will need to purchase through a reseller. You can find one that is able to sell in your part of the world, here: Adobe Connect Partners. Just reach out to one of the Global Partners.

  • I need more than the maximum allowed 30 profiles - how do I change this?

    I need more than the maximum allowed 30 profiles - how do I change this? Once I reach 30 profiles and I try to add one - it just deletes one automatically thus only allowing a maximum of 30. Please help.

    You are talking about 30 Firefox Profiles on the same Windows Logon User Account?
    I never saw that as a limit myself. I had 53 Profiles at one time, although I haven't done that since Firefox 3.0. It was causing an extended launch time and I started using "remote" Profiles that weren't controlled by the Profile Manager and weren't in the '''profiles.ini''' file; launched by command line. Like this in the Target line for the desktop shortcut: <br />
    ''' "C:\Program Files\Firefox_4.0_zip\firefox.exe" -Profile D:\Mozilla\Active-Profiles\4.0_10-15-10-N '''

  • NEED more than 15 menu item in Context Menu ????

    Hi,
    I really need to have more than 15 menu item displayed on Context Menu. I desperately need some workaround or ideas to achieve this
    My client has invested thousands of dollar in Flex Project, he definitely need more than 15 menu item.If this project failed , client will NEVER think to invest in flex.
    Had I been  aware of this limitation before I would have thought some solution by now.This comes as a surprise to me at the last moment ,just fews days before Prod Date.
    I cant also user java Scrip heck  as my Flex application is running inside Dot net Container , I do not access to the luxury of java script
    Pls gents help me get rid of this ...PLEASE provide some ideas.
    Thanks in advance.
    Thanks,
    Dharmendra

    Thanks Natasha,
    I got your point  but as for as I  know grouping like Quality is not possibel in Flax Context menu. I also cant go for window style menu(file,edit) because I need them to be displyed on DataGrid right clk . I am designing a trade datagrid where in trader can see all trades and he can approve/reject etc by just right clk and  selcting proper menu item form Context Menu.
    In case of window style (acrobat.com) menu trader will have to reach to  menu instead of  getting all options on mouse right clk
    I will have to think other alternative wich provides same ease as cotext menu.(God knows what is that )
    Once again thanks for suggestion.
    Regards,
    Dharmendra

  • Creating more than one account for a single user

    I was wondering, if I creat more than one account for me (the only person that uses my powerbook) is that going overboard? I mean, lets say I am logged into the standard account and I want to learn more about the bash shell and using terminal which I am new to, if I **** something up will the whole system be toast or will only things in that account be messed up? Like could I then just log into my admin account and delete the other messed up one? Or no? My theory was that this was a way of keeping my comp safe from myself, being that I am new to macs and moreso that I am new to the unix side of things and want to start learning the command line without worrying about screwing up my whole system. I would just use the standard account for everyday use (like what I do now) or experiment with terminal, and when I need to download something or change some settings that requires me to be logged in as admin then I would log in and download what I need then log out and use it in the standard account...am I just wasting my time? Is what I am doing any "safer" than just having one admin account and thats it?
    Thanks for all the help! It feels good to be a part of the goodguys team =)
    Thanks again!

    Ghost,
    First, I don't subscribe to the "one should not use an admin account" philosophy. For someone who is the owner and main user of any given machine, I see the use of anything but an admin account a bit anal, totally unecessary, and needlessly complicating.
    On the other hand, I don't see the need for more than one admin account on any given machine. Yes, I see exceptions to this, and many people favor having a second admin account as a "backup," but I have never had more than one admin account on any of my machines, and have never encountered a situation where one would have helped.
    In short, I like the idea of having a "main" admin account that is used most of the time, and then having "secondary" accounts (all non-admin) for any additional users that might log in.
    Now, any limitations that apply to you as a GUI user of an account, admin or not, will apply to you at the command line as well. In other words, you can't get yourself into any more trouble at the command line than you can within the GUI. In fact, you might even be better protected at the command line than you are in the GUI. I say this because any action that would ordinarily "elevate" you above the standard capabilities of a non-admin user require the use of "sudo." Avoid the use of sudo, and you can avoid any problems.
    That doesn't mean that you wouldn't be able to do something stupid that might wreck an account that contains "all of your stuff," and on which you depend. It is not likely that you would damage your System, but it is entirely conceivable that you might, for example, accidently delete or overwrite your entire HOME folder. Oops!
    If you simply don't trust yourself with the command line, a second account might be a good place to experiment. Maybe create it as a non-admin account at first, with the option to change it to an admin account at a later time, when you want to learn how to use "sudo" to do more powerful things. By then, you will understand what not to do. Eventually, you will have the confidence to use the command line in your own account, which will have been an admin account all this while.
    Scott

  • More than 3 AR for one Sales Order in relationship map

    Hello,
    i would need some advice on the following: If you have more than 3 Invoice for one Sales order these are not shown seperately in the relationship map. SAP could reproduce the issue and refers to it as normal system procedure at the moment. They adviced me to post a thread here.Is there any way you could make the invoices be seen one by one.
    SAP Version 8.81 PL 5
    Thanks a lot for any advices on this topic
    Vanessa
    Edited by: Vanessa Schürer on Jan 16, 2012 2:45 PM

    Welcome to the forum.
    If you have any suggestions you post them on sap's new idea collaboration page. You do bring up a good point and hopefully in 8.82 it will be resolved as the relationship map was not originally on the road map. Hopefully they can develop this feature.

  • Why do we need more than one retained earnings accounts & what is the use?

    Hi FI Experts,
    Why do we need more than one retained earnings accounts, what is the precise use of two?
    I know the retained earnings account is used to carry forward the balances during the year end to the balance sheet and there by making the p&L A/cs balances as zero.
    I guess the second one is used for different valueations for example  as depreciation accounts for different valuations will have different retained earnings accounts.
    Kindly correct me if I am wrong and eloborate on the use having more than one retained earnings accounts.
    with regards
    Ramesh Y

    Hi,
    Well, separate retained earnings accounts are used for parallel financial reporting, it means when you need to report in accordance with, for example, local GAAP and IFRS or US GAAP at the same time. Several retained earnings accounts  are necessary when the company chooses account based approach for parallel reporting. (GL accounts are broken down into several groups, for example you use different accounts for IFRS valuation, for local GAAP and they are also shared accounts common for both principles.)
    m.

  • Business graphics need more than one category

    Dear All,
         We have a issue for business graphics need more than one category about web dynpro abap.
       Our data:
       plant   month   qty
      1000   201101  10
      1000   201102  30
      2000   201101  30
      2000  201103   40
    Now we need one category for "plant" and other category  for "month", Data is qty.

    Hello Bill,
    could you explain bit more about your requirement? How would you like the graph to be renderded with two categories. Can't you club Plant and Month into one single category (1000-201101) and display it?
    BR, Saravanan

Maybe you are looking for