I need to apply for a student loan and I am told that the version of firfox is not supported It recommend I download an older version: Mozilla Firefox 3.5.x and 3.6.x How do I do this?
I'm told to download an older version of firefox that supports the application for federal student loan. They want me to download: Windows 7 - Mozilla Firefox 3.5.x and 3.6.x
The fafsa.gov site does not currently support Firefox newer than version 3.6.x. That is their choice.
You can install Firefox Portable version to use only on that site and use your installed current Firefox version for everything else. Firefox Portable is not produced by Mozilla (but is based on Firefox released versions) and is not supported on this site -- has its own support forum (see below). Firefox Portable installs in a separate folder on your hard drive so that it does not interfere with your currently installed Firefox version settings or personal information (bookmarks, passwords, etc.). You can also install Firefox Portable on a USB/thumb/pin/jump drive.
*Firefox Portable general information: http://portableapps.com/apps/internet/firefox_portable
*Firefox Portable 3.6.22 download links: http://portableapps.com/apps/internet/firefox_portable/localization#legacy36
*Firefox Portable user forum: http://portableapps.com/forums/support/firefox_portable
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]
Similar Messages
-
how do you repair the EFI systems partitions when you mac tells you that the live file system is not supported?
I don't have good news. You will need to repartition and reformat the hard drive in order to determine if the drive is still OK or if it needs to be replaced. If your computer is a 2011 model or later do the following:
Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
This should restore the version of OS X originally pre-installed on the computer.
If your computer is pre-2011 model, then locate the original installer discs that came with the computer. Then do this:
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
with your computer. Insert the disc into the optical drive and restart the computer.
After the chime press and hold down the "C" key. Release the key when you see
a small spinning gear appear below the dark gray Apple logo.
2. After the installer loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the Utilities menu.
After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
size.) Click on the Partition tab in the DU main window. Set the number of
partitions to one (1) from the Partitions drop down menu, click on Options button
and select GUID, click on OK, then set the format type to MacOS Extended
(Journaled, if supported), then click on the Apply button.
3. When the formatting has completed quit DU and return to the installer. Proceed
with the OS X installation and follow the directions included with the installer.
4. When the installation has completed your computer will Restart into the Setup
Assistant. Be sure you configure your initial admin account with the exact same
username and password that you used on your old drive. After you finish Setup
Assistant will complete the installation after which you will be running a fresh
install of OS X. You can now begin the update process by opening Software
Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1. You can now download a version of OS X from which to upgrade from your Purchases page in the App Store. -
I put a Tesco sim (02 carrier) in 2 unlocked phones, Both phones are now locked to 02, 02 blame apple, I connect the iphone to itunes and it states that the new carrier (orange) is not supported, Isk this of both 02 and apple, who's phone is this and what right do you have to lock a previously unlocked phone? very angry
Where did you get these phones?
These and other forums are full of people with iPhone unlocking problems - the net result is that, as others have said, is:
If you bought them from Apple they will be (and stay) unlocked.
If you bought them PAYG from CPW then they will lock to the first SIM activated.
Any other contract or PAYG phone iPhone bought from the networks WILL be locked by them too.
However, all is not lost. The original purchaser can request for the phones to be unlocked by Apple, via the carrier. The carriers usually charge around £20 to do this, or gratis if you're out of contract.
You are the original purchaser, right? If not, you need to get in touch with that person and pray they'll help you out. -
I'm trying to create a new apple-id but when typing the email adress I want to use I'm told that the particular email adress is not allowed When searching I can't find same being used anywhere. How do I find out where that particular email adress is used so I can delete it there and use it for my new apple-id?
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Also
If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased. -
When I try to connect the Air with my iPhone to create an Hotspot, it drops the connection and gives an error message in the iPhone saying that the device (MacBook Air) is not supported. What can i do about it?
The problem has been fixed with the most recent OS X software update.
-
I am attempting to update to the new os x mavericks and while completing the download it prompts me to choose a disk. I have chosen the only option I am provided and am then told that the update cannot be installed on "untitled 1" what am I supposed to do?
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Click the Clear Display icon in the toolbar. Then try the installation again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name or email address, may appear in the log. Anonymize before posting. -
I updated my IPhone from IOS 4.3 to IOS 6.0.1 and since I do that the IPhone keep rebooting please advice, I updated my IPhone from IOS 4.3 to IOS 6.0.1 and since I do that the IPhone keep rebooting please advice
I am assuming you updated to version 5.1.1, not 5.0.1 since no legitimate version of 5.0.1 is available.
Where is this iPhone from and what means did you use to unlock it? -
Hi!
I'm trying to have an analog square wave input determine where data gathered from a second analog input channel is stored. I want data to be stored to one array during the high signal period of the square wave and data to be store to another array during the low signal period of the square wave. The square wave I'm using is of constant frequency (8.3 Hz). I believe I need to use an analog input wave as opposed to a onboard clock or other timing mechanism because my square wave is also being used to modify the input going into my experimental setup. Thus the data storage needs to be correlated to the timing of the data modification in the experiment. I tried to use the retriggerable property node function, but receive error 200452, which I think means that my PXI card (6115) can't support this retriggerable function. So I'm looking for other ways to accomplish alternating data storage in response to an incoming analog square wave. Any help would be GREATLY appreciated... Thanks! (I'm also quite new with LabView so toddler-type explanations would probably be most useful )
-Shari
(LabView version 8.6)
Attachments:
Pulsed_Acq_Switch_Simplified.vi 47 KBHello Shari,
I am looking at your situation and it seems very intriguing. after downloading your file I have a couple questions to ask if you don't mind answering.
Currently in your program you are only taking one sample of data at a time, this could lead to uneven sampling. Would you like to sample at a consistent rate (say 10 Kilosamples of data a second?) if so what type of card are you using?
Also, Do you want your data to be in a 2-D array of data?
Best Wishes,
Daniel -
I'm attempting to download and play a digital copy from the Jurassic Park Trilogy (for now, only Lost World). I'm able to play the iTunes extras, but attempts to play the actual movie returns the dialog "This movie requires QuickTime, which is not supported by this version of iTunes."
I'm confused as to why a movie I just downloaded from iTunes an hour ago isn't actually compatible with iTunes?!?!? (Yes, it was downloaded from the iTunes store. The Jurassic Park Trilogy provides redemption codes, not an actual file.)
(Its worth saying, the movie plays just fine in QuickTime itself.)Try restarting your iTunes in 32-bit mode, as per the following document:
iTunes 10.4 for Mac: Older media files may require iTunes to reopen in 32-bit mode -
When I open it, it closes and I am told that the DEP is blocing it?
When I try to open Firefox, it immediately shuts down and says, Firefox has stopped working-windows is checking for a solution. When I look in to this is says that the DEP (Data Execution Prevention is not allowing it through. It provides information on how to fix the problem but this does not help. Firefox is not listed as an executable program, therefore it does not allow me block the DEP for it. I have tried removing the program and reloading it several times, and the it will load up temporarily and then start the same problem again.
I misread your message. I thought it said I did not have burn support with the Samsung hardware.
When the CD goes in it says You inserted a bland CD. choose an action from the popup menu or click ignore
open finder
open itunes
open disk utility
make this action the default
eject ignore ok
However, when I am making CDs. I am in itunes. That is where my recordings areI haven't tried to do it from this vantage point.
I don't know how to make a screen shot on a mac.
I go to my playlist and click on the little gear icon at the bottom left and I leave things as they are - preferred speed - maximum. I leave it on audio CD - and then I select BURN.
When I tried this the other day, I could not get it to burn, no matter how hard I tried - everything I could think of, using a different CD, force quitting everything I was not using, restarting the computer, unplugging the CD hardware and plugging it back in after a little while, nothing worked. I got that message that said my player was being used by another application every time I tried to make the CD. This took over an hour. I don't know of another way to make a CD on the mac; I was not using another program or application. Now it seems to be working fine. I am burning another copy of something I gave away.
I wish I knew what caused this. It was a real problem Saturday morning. -
Cannot get updates for iTunes, why?
Go to http://www.apple.com/itunes/download then download and install the latest version.
-
My computer is an HP Pavilion dv7
EgisTec, who now provide the HP Simplepass application, have made an update of the scanner software for Firefox 4, for details see https://support.mozilla.com/questions/814397
-
can someone please help me because i really need this now
Hi gump68,
Thanks for visiting Apple Support Communities.
You may find the steps in this article helpful if iTunes is not installing on your PC:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
All the best,
Jeremy -
An Incompatible Browser Has Been Detected need Windows 7 - Mozilla Firefox 3.5.x and 3.6.x
I'm trying to apply for FASFA student aid. When I click on the "apply now" button the "An Incompatible Browser Has Been Detected" page displays. The Mozilla Firefox requirements for Windows 7 is the 3.5.x and3.6 x version. I had already downloaded the 5.0. Have probably made a mess of things, I think I disabled the 5.0 but need the 3.5x etc. to be able to complete the FASFA form.
You could install the portable Firefox version 3.6 to avoid a conflict with the newer version. If you can contact the person running the page itself, you could advise him that Firefox is now up to version 6, and version 7 will be available soon.
* http://portableapps.com/apps/internet/firefox_portable#legacy -
I need to apply for a job but I'm told I need to enable cookies and java script, how do I do that? I can't find it in system preferences
I just updated to the new operating system which i'm starting to think was a bad idea, because it reset all my settings and I don't know how to fix them.so when I go to safari>preferences>security>uncheck box labled enable java script links on webpages don't work and pictures and links son't want to appear on websites. this made it so webpages don't want to work past loading the content in text format. I have to check enable java script to go the webpages to work right so images and links work again but when I try to apply for this job the error message pops up saying I need to enable cookies and java script.
SO I GUESS MY QUESTION IS IF JAVA SCRIPT IS ALREADY ENABLED HOW TO I ENABLE COOKIES?
Maybe you are looking for
-
What to look for when buying a second hand 8220 flip
Hi, I'm temted to buy a secondhand (2-3 month old) 8220 flip phone and although the seller seems OK in her emails, You never know. What must I look for in order to be reasonably sure of my purchase? Also, this phone is locked to Rogers, can it be unl
-
I have a new Canon Mark III and Preview will not open the RAW files. It had no problems with the D5's RAW's. I'm using OSX 10.4.11 with latest Quicktime (7.4.1). Maybe Apple isn't up to date with the newest RAW files? ? ? or maybe I'm doing something
-
Premiere Elements 13 issue with the mouse on MAC OSX Yosemite 10.10.1 When I select a clip of video and move to a different place in my time line, Premiere Elements 13, will not release the clip from the mouse. The clip follows my mouse movements and
-
My phone doesn't make and receive calls. It doesn't have coverage where other iPhones with the same network do. Please, let me know how way I sort this problem out?
-
Tiles no longer appear in new tab and unable to repin new
When i open a new tab its just white no outlines of tiles nothing just blank ive reset my history so its public and ive tried clicking the gear to set it but it just opens the rest of the options none one them are for "To turn on the new tab page, cl