I need to Average multiple months.

I am new to spreedsheets and I am makeing a sheet for my work and I need help.
I am trying to average multiple cells as I enter new numbers in the cells per week.
For example $100.00 in cell A1 200.00 in cell B1,C1:L1 are all blank until I enter new numbers. I want to calculate in cell C20 to average all the cells in the ones with $100.00,200.00 and the ones that are still blank. I'm trying to average my income per month and I want to see the average change when I enter new numbers. I tried to do this, I have 12 cells labeled Jan thru Dec using =Average(A1:L1). When I did this it divided the number I entered in cell A1 by 12. I want it to average just A1 then when I enter a number in B1 it will average A1 and B1. and so on and so forth.
There is got to be a formula for this.
Please help.
Rick

Hi CJ,
First of all, if you're using row 1 and column A for calculations, make sure that these are not Header row and column cells. Open the Inspector and go to the Table inspector. Click on the Headers & Footer buttons until none of the three are highlighted (blue).
Entering 100 in B2 and 200 in C2 and =AVERAGE(B2:M2) in another cell (D21, to keep the same relative position as you used, plus two other cells just to check), gave the correct 150 result.
Entering 300 into D2 changed the average to 200, as it should.
Entering a text character (a) in E2 made no change (AVERAGE() ignores text).
Entering a zero in F2 changed the average to 150, as it should.
If it's not a Header Row problem, the next best possibility is that your "blank" cells actually contain a zero.
Regards,
Barry

Similar Messages

Multiple Months restriction

HI all
we need to have multiple Months restriction on different measures in a single report.
how can that be done

Hi Vinay,
Please try it out like this once.
Create a 5 Restricted keyfigures like this.
In Each Restricted Keyfigure mainatain No.of Blocked Invoices, Calmonth Variable , Unit Measure characteristic value.
Use Standard Customer exit variable for Current data or Current month. You need to install through Business content.
I hope in this way you can meet your requirement.
Please let me know whether i came up with required solution?
Regards,
Chandu.
Edited by: chandu guduru on Sep 17, 2009 7:28 AM

IS_U billing- for multiple months

HI
I've a issue to run billing for more than one month. While doing billing theough EASIBI, system is not allowing to check 2/3 months billing orders and complete billing at a time.
Currently, i am able to check only one month billing orders once, complete the billing and then go for the next month.
My Q is, how can i do the billing for multiple months at a time?? do i need to go for any coding changes in ABAP?
Highly appreciate anybody's solution for this. It's very important for me.
thanks in advance.
DGR

hi,
your issue if I understand correctly is that you are creating billing orders for several months and now want to bill them all at one go.If I am correct then kindly follow the below steps otherwise revet back again
1. tran el01 create billing orders for several months.
2. tran el31 check with your installation number whether the billing orders are created and with status billable.
3. tran el28 give your installation no. as selection criteria ,you will get a popup subscreen giving u the list of all the billable billing orders.kindly select from the oldest date otherwise it would give errors later.
4. enter the meter reading for all the billing orders.you will see the entry for the oldest mr date,press shift+f6,to enter dates for the next billing order.
5. when finished with all entry save and execute tran easibi. giving bill by date as the newest mr date which u entered.
hopefully it will execute successfully.
cheers,
Rakesh..
PS: if you dont want to go to tran el01 many times to create multiple billing orders try tran EL06

Unposting Journals for Multiple Months

Hello,
Is there a way to unpost Journals for multiple months? Through Workspace and the client, you are only able to select one month at a time. I have a need to unpost multiple journals for all 12 months ( 3 journals * 12 months = 36). This is a reocurring process on our Forcasting scenarios and I'm looking for the most efficient way to get this done.
Thanks
Tony

I would ask qhy you are posting and unposting journals to a forecast scenario? If you need to have the data from journals, you can do that with rules, and avoid the journals altogether.
--Chris

Average multiple channels

Hello,
I have a set of 5 acquisitions data of Force and Acceleration in time domain.
I have to plot the five curves of acceleration vs force. (no problem for this)
Than I need to average the five acceleration data at increment of 1 N.
At the end I should have a column with Force ( 1, 2, 3,..... N) and a column of the averaged acceleration data.
Is it possible with Diadem or I have to use Excel?
Thanks

Hi Giova,
I would recommend either the "Channel Functions >> Linear Mapping" or the "Statistics >> Reducing Classification" ANALYSIS dialog, depending on exactly which X (Force) values you have-- the former for interpolation between measured values and the latter for turning multiple measured values into a single representative "1N" measured Y value, and so on.
Ask if you have further questions,
Brad Turpin
DIAdem Product Support Engineer
National Instruments

We have multiple devices in the family, including now 4 iphones, all who share the same Apple ID. I want to stop this, but need thoughts on multiple IDs as Findmyphone works well as same ID?!

We have multiple devices in the family, including now 4 iphones, all who share the same Apple ID. I want to stop this, but need thoughts on multiple IDs as Findmyphone works well as same ID?!

I don't know if I'm asking this all in a way that can be understood? Thanks ED3K, however that part I do understand (in the link you provided!)
What I need to know is "how" I can separate or rather create another Apple ID for my son-who is currently using "my Apple ID?" If there is a way to let him keep "all" his info on his phone (eg-contacts, music, app's, etc.) without doing a "reset?') Somehow I need to go into his phone's setting-create a new Apple ID and possibly a new password so he can still use our combined iCloud & Itunes account?
Also then letting me take back my Apple ID & password, but again allowing us (my son and I) to use the same iCloud & Itunes account? Does that make more sense??? I'm sincerely trying to get this cleared up once and for all----just need guidance from someone who has a true understanding of the whole Apple iCloud/Itunes system!
Thanks again for "anyone" that can help me!!!

Is there a way to view multiple months simultaneously?

Is there any way that iCal can allow multiple months to be viewed simultaneously (similar to a year or multi-month wall calendar?).
(Or even a, gulp, third party piece of software?)
-Ty

Hi Ty,
There's not a way I know of in iCal. You might find something that does it here:
http://www.hawkwings.net/plugins.htm#ical
I'd supply some feedback to Apple.:
http://www.apple.com/feedback/ical.html
Best wishes
John M

Do I need to export multiple sizes for all standard print sizes? i.e.Say I crop the image in LR to 6'5" x 9' to fit within an 11" x 14" (overall) mat of a framed print.. Now let's say I want to reprint that same image in a 12" x 16" size ... to fit within

Do I need to export multiple sizes for all standard print sizes? i.e.Say I crop the image in LR to 6'5" x 9' to fit within an 11" x 14" (overall) mat of a framed print.. Now let's say I want to reprint that same image in a 12" x 16" size ... to fit within a mat of with overall size of 20" x 24"? Or will the 1st export be "locked" at 6.5" X 9" (proportionately)?

So, for the first one Export it cropped to 6.5 x 9 - and in the Export Dialog box there is a capability to rename the file for exported output - which would allow you to add something like the crop or intention to the base name of the file. e.g. for _IMG0846.nef - setup the output filename to _IMG0846-65x9 for 11x14.jpg and output it at, say 300 or 360 dpi. So, it has a unique name and purpose in your output folder.
For best results, now, re-crop the picture in LR - just open the crop [R] dialog again, reframe the image to the new ratio, 12x16 and Export again - with an adjustment to the filename. e.g. _IMG0846-12x16 for 20x24.jpg
So, now you have two clearly identified image files in your output area and you can provide those to whomever is printing for you, etc. Discard them when you're done since you always have the original to return to to re-frame again as necessary.
This way you get output sharpening and resolution (in pixels) optimized for your output print size. Maybe not super important for smallish prints-but more important for larger ones. Output at 100 quality.

I am trying to average multiple cells including some blank cells. How do I get numbers to assess a blank cell as zero and include that cell in the average?

I am trying to average multiple cells including some blank cells. How do I get numbers to assess a blank cell as zero and include that cell in the average?

Hi rkcfizzle,
Blanks
Blanks = 0
1
1
2
2
0
3
3
2
1.5
AVERAGE ignores blank cells (Column A)
Formula in Footer Cell A6
=AVERAGE(A)
If you want to include blank cells as zero, type this formula in B2 (and Fill Down)
=IF(A2<>0,A2,0)
Numbers 3 will change the formula to
=IF(A2≠0,A2,0)
Yeah, right! but that is Numbers 3.
And the answer (6/4) is 1.5. Correct!
Regards,
Ian.

Using the checking register template I've made multiple months and I want to total the data, is there a way I can link the sums?

Same as topic.

Hi Sandra,
The Checking register's design assumes all transactions will be recorded on the single Transactions table.
With a single Transactions table, it's relatively easy to pull a summary by month into separate Accounts Categories tables for each month and to use a separate calculation for the overall totals rather than linking the separate sums together.
More detail about "I've made multiple months" might be useful to recommending a solution.
Regards,
Barry

Item supply/demand can't display the po_line that need-by is multiple

item supply/demand can't display the po_line that need-by is multiple,i means that if the po_line have multi line_locations ,it can't be displayed in the supply/demand windows.
how to deal this problem?

To add detail to Mikeyc7m's last post
If the folder has a default value for author then only an adminstrator could check files into that folder. This is because non administrators can not spoof their user name to be someone else's. With the default value being someone else they will never be able to check in (unless they are an admin who can spoof who the user is and in this case it will look like the user checked in a file and not the admin which is a different problem but still a problem).

Need to create multiple PA documents during billing

Hello,
We have the following scenario.
When we create a billing document from an SD order, we need to create multiple PA documents based on the condition types. We have maintained those condition types to different value fields in KE4I.
For e.g, for a line item in an order, we have Basic Price = 100, Discount = 20
When we do billing for the above line item, we want to create two PA documents, one for the Basic Price and one for the discount. Note that the above Basic prive and Discount are mapped to different value fields and different cost element groups.
Thank you.
Bala

Hi,
This functionality is not possible not does it make any sense. SD conditions are mapped to value fields via KE4I. If you have not activated summarization (tcode KE2S) then for every SD item you will get a COPA document. Each COPA document will contain all the values fields filled via the SD conditions displayed in one line item.
Imagine if you have a SD billing document with 20 items, each items containing 10 conditions. Then you will get 200 COPA documents as per your requirement !!! This does not make any sense neither from technical point of view nor from business point of view.
regards
Waman

Need to store multiple session values in flex

Hi,
I need to store multiple session values in flex based on the user who logged in.
For Example, if a user logged in as an administrator and in another windows another user logged in as guest, i need to maintain two seperate session for the two different users.
Is it possible for maintaining different sessions.
Expecting your valuable response.
Thanks
Jude Paul

Look at Shared Objects. You can store this information in them by creating a unique object for each type of user.

Do we need to have Multiple Vendor Roots in PPOCV_BBP for Multiple back end

hi Gurus,
Do we need to have multiple vendor root orgs in PPOCV_BBP, when
we have mutliple backends to be linked to the same SRM server ?
Please do provide your valuable inputs.
Best Regards
Prashanth

Hi
Ideally, you should have only one Root node for Vendor.
Please refer to these links.
<b>http://help.sap.com/saphelp_srm50/helpdata/en/b4/9de8cc7d4b11d2b423006094b92d37/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/62/fb7d3cb7f58910e10000000a114084/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/e5/1c6d3e40753f7ce10000000a114084/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/56/54f137a5e6740ae10000009b38f8cf/frameset.htm</b>
<u>Also refer to transaction - BBPMAININT in SRM Web page for Business Partners.</u>
Hope this will help.
Please reward suitable points, incase it suits your requirements.
Regards
- Atul

Acquiring 4 channels at 10kHz using PCI-6070E card and Labview 7.0. I need to average a signal that is time-locked to an analog trigger. Is their an available vi to accomplish this?

I am acquiring 4 channels of data, sampling at 10 kHz. I am using a PCI-6070E board. I need to average a biological signal time-locked to an analog trigger that occurs at about 3/second. Is there a vi that will accomplish this?

If you are looking for a way to do a "retriggerable" acquisition, there is a shipping example called Acquire N - Multi-Analog Hardware Trig.vi that accomplishes this. However, please note that this example achieves this effect by reconfiguring the task for each trigger in software. This means there is a delay between reconfigurations. If a trigger signal comes during this reconfiguration, it will be missed. This delay is system dependent on how fast your computer can execute the reconfiguration code. The 6070E does not support hardware retriggerable acquisitions.
However, if you are wanting to acquire continuously and then do some post-acquisition analysis, I couldn't find any examples that accomplish this, but it wouldn't be too hard to build one yourself. Y
ou would probably want to include your trigger signal as an additional input channel. Then once you've acquired all of your data, in software you can scan through the data acquired for the 5th channel and then segment your data according to that signal. I hope this information helps.

I need to Average multiple months.

Similar Messages

Maybe you are looking for