I need to configure WSA Ironport for user to access FTP on port 2235
We have internal users who need to connect ftp on port 2235.
can anyone share the information on how to configure it
Hi,
First you need to make sure the traffic is going to the proxy server, i.e. WCCP is redirecting traffic or you're set up correctly fro explicit.
Then you need to mkae sure that FTP is allowed in the Protocols and User Agents and that port 2235 is in the HTTP connect Ports.
Thanks
Chris
Similar Messages
-
How to configure Email notification for User login's in Exchange Infrastructure?
How to configure Email notification for User login's in Client Machines?
Hi ,
Based on the description , you need to assign logon scripts to the end users via group policy and also use your exchange server as the smtp server in that logon script to relay emails to the internal recipients.
Thanks & Regards S.Nithyanandham -
Configuring group policy for user profiles in Windows Server 2012 R2 Domain
Requesting some experts advise on configuring group policy for user profiles.
We will be building new Windows Server 2012 R2 Domain Controllers (Domain of 400 users).
The settings which I am concerned:
1. Folder Redirection: Desktop, Documents, Favorites.
2. Quota for Folder Redirection - 1 GB per user.
3. Map a networked drive - 1 GB per user.
4. Roaming profile - (Will ignore if it does not suit our requirement).
The question is how outlook profile will be retained / automatically moved if the users move from once computer to other?
FYI, E-mails hosted on MS Office365 and OST file size of few users more than 25GB. So, in case the user moves from one computer to other, the entire mailbox will be downloaded via internet. This consumes high bandwidth if more than 3-4 users shift per day.
Thanks a lot for your valuable time and efforts.Hi,
>>The question is how outlook profile will be retained / automatically moved if the users move from once computer to other?
This depends on where our outlook data files are stored. If these data files are stored under
drive:\Users\<username>\AppData\Local, then these files can’t be redirected, for folder redirection can’t redirect appdata local or locallow.
However, regarding your question, we can refer to the following thread to find the solution.
Roam outlook profiles without roaming profiles
http://social.technet.microsoft.com/Forums/office/en-US/3908b8e0-8f44-4a34-8eb5-5a024df3463e/roam-outlook-profiles-without-roaming-profiles
In addition, regarding how to configure folder redirection, the following article can be referred to for more information.
Configuring Folder Redirection
http://technet.microsoft.com/library/cc786749.aspx
Hope it helps.
Best regards,
Frank Shen -
Need to configure output type for adobe form
Hello All,
I need to configure output type for Adobe Form thru NACE. What would be print program and how do I call my form from that program? and, what would be the FORM routine for that form in NACE?
I'm little confused, Pls I need your help.
Thanks in advance,
ChandraHi,
Just before few weeks we did this task.
Say for example if you want to print PO details through ADOBE form instead of normal sapscript layout or standard MEDRUCK, you can follow the following steps.
1. Design the form in SFP tcode, by passing the necessary inputs through form interface.
2. Then use tcode tcode NACE and select EF as application and click output types button on the application tool bar. Select NEU output type and double click processing routines on left side.
3. Then, in the right side of the screen we can see the calling program and the form (may be sapscript or smartform) whatever used.
4. For form names we have two options in NACE tcode.
One is Form and the otherone is PDF/Smartform Form. If you are using adobe form give your form name under PDF/Smartform and also select PDF under the type option in the same screen.
This worked perfectly for us. But pass the required parameters to the form from the routine used in standard program.
If any queries please post it. -
OIM 11gR2 PS1: Need to configure auto approval for self registration
Hi All
I need to configure auto approval for self registration in OIM 11g R2 PS1. I have done this in R1 but looks like it is different in R2.
Can you please guide me or point me to some blog/guide.
Thankscheck this link:
Developing Workflows for Approval and Manual Provisioning - 11g Release 2 (11.1.2.1.0) -
What role needs to be assigned to the user to access existing custom OData services?
Hi all,
What role needs to be assigned to the user to access existing custom OData services?
With SAP ALL its working. But cannot assign that to all users. Whats the specific role for this?
I tried with /IWFND/RT_GW_USER. But it says the role does not exist.
Thank you,
AchuHi,
As usual you need to build a role by yourself based on your requirements. In case of Odata services there are two different TADIR services that needs to be added. One corresponds to authorization to execute logic on backend server and the other one to access service on front end server. You can get specific services by tracing one call using ST01. For Fiori apps from SAP you get role templates. You can use them for inspiration.
Cheers -
Need help with Java app for user input 5 numbers, remove dups, etc.
I'm new to Java (only a few weeks under my belt) and struggling with an application. The project is to write an app that inputs 5 numbers between 10 and 100, not allowing duplicates, and displaying each correct number entered, using the smallest possible array to solve the problem. Output example:
Please enter a number: 45
Number stored.
45
Please enter a number: 54
Number stored.
45 54
Please enter a number: 33
Number stored.
45 54 33
etc.
I've been working on this project for days, re-read the book chapter multiple times (unfortunately, the book doesn't have this type of problem as an example to steer you in the relatively general direction) and am proud that I've gotten this far. My problems are 1) I can only get one item number to input rather than a running list of the 5 values, 2) I can't figure out how to check for duplicate numbers. Any help is appreciated.
My code is as follows:
import java.util.Scanner; // program uses class Scanner
public class Array
public static void main( String args[] )
// create Scanner to obtain input from command window
Scanner input = new Scanner( System.in);
// declare variables
int array[] = new int[ 5 ]; // declare array named array
int inputNumbers = 0; // numbers entered
while( inputNumbers < array.length )
// prompt for user to input a number
System.out.print( "Please enter a number: " );
int numberInput = input.nextInt();
// validate the input
if (numberInput >=10 && numberInput <=100)
System.out.println("Number stored.");
else
System.out.println("Invalid number. Please enter a number within range.");
// checks to see if this number already exists
boolean number = false;
// display array values
for ( int counter = 0; counter < array.length; counter++ )
array[ counter ] = numberInput;
// display array values
System.out.printf( "%d\n", array[ inputNumbers ] );
// increment number of entered numbers
inputNumbers++;
} // end close ArrayYikes, there is a much better way to go about this that is probably within what you have already learned, but since you are a student and this is how you started, let's just concentrate on fixing what you got.
First, as already noted by another poster, your formatting is really bad. Formatting is really important because it makes the code much more readable for you and anyone who comes along to help you or use your code. And I second that posters comment that brackets should always be used, especially for beginner programmers. Unfortunately beginner programmers often get stuck thinking that less lines of code equals better program, this is not true; even though better programmers often use far less lines of code.
// validate the input
if (numberInput >=10 && numberInput <=100)
System.out.println("Number stored.");
else
System.out.println("Invalid number. Please enter a number within range."); Note the above as you have it.
// validate the input
if (numberInput >=10 && numberInput <=100)
System.out.println("Number stored.");
else
System.out.println("Invalid number. Please enter a number within range."); Note how much more readable just correct indentation makes.
// validate the input
if (numberInput >=10 && numberInput <=100) {
System.out.println("Number stored.");
else {
System.out.println("Invalid number. Please enter a number within range.");
} Note how it should be coded for a beginner coder.
Now that it is readable, exam your code and think about what you are doing here. Do you really want to print "Number Stored" before you checked to ensure it is not a dupe? That could lead to some really confused and frustrated users, and since the main user of your program will be your teacher, that could be unhealthy for your GPA.
Since I am not here to do your homework for you, I will just give you some advice, you only need one if statement to do this correctly, you must drop the else and fix the if. I tell you this, because as a former educator i know the first thing running through beginners minds in this situation is to just make the if statement empty, but this is a big no no and even if you do trick it into working your teacher will not be fooled nor impressed and again your GPA will suffer.
As for the rest, you do need a for loop inside your while loop, but not where or how you have it. Inside the while loop the for loop should be used for checking for dupes, not for overwriting every entry in the array as you currently have it set up to do. And certainly not for printing every element of the array each time a new element is added as your comments lead me to suspect you were trying to do, that would get real annoying really fast again resulting in abuse of your GPA. Printing the array should be in its own for loop after the while loop, or even better in its own method.
As for how to check for dupes, well, you obviously at least somewhat understand loops and if statements, thus you have all the tools needed, so where is the problem?
JSG -
Need to configure email alerts for app/web server shutdown
Hi,
I need to configure email alert notification, so that whenever application server or webserver is shutdown/restarted, an email is sent to the group/userid.
I am aware that in Peoplesoft, there is no parameter or functionality which sends an email notification whenever application server & web server restart & shutdown. This is where I need help.
Did anyone setup the email alert notification in any of your environments? If so, please let me know how did you do the setup?
Thanks,
SakkyPlease find the below sample batch program.
this helps to start the appserver automatically and if the status fails this will send email automatically.
This is the another way of findting the status of the app server.
In the below program, by finding the "Done" value on the output screen we can decide if the server is running or not.
Hope you understand this, Kindly let me know if you need further information.
===============================
@echo off
REM Set a temporary variable
SET CONNECT
REM Check the status of the Application server
psadmin -c sstatus -d PSEPM | FIND "Done" > NUL
REM If the server is down boot the server
ERRORLEVEL 1 SET CONNECT= psadmin -c boot -d PSEPM
%CONNECT%
REM Check the server again for status
psadmin -c sstatus -d PSEPM | FIND "Done" > NUL
IF ERRORLEVEL 1 goto sendmail
goto end
REM Sending mail to Administrator
:sendmail
REM setting the path for email command
SET CONNECT= cd D:\PT849\bin\client\winx86
%CONNECT%
REM Below command will send mail to the Administrator
SET CONNECT= psemail -server < server ip> -from [email protected] -to [email protected] -subject "Server Down" -body "Hi, Server is down at this time, unable to boot."
%CONNECT%
:end
==============================
Edited by: Soundappan on Feb 19, 2011 10:39 AM
Edited by: Soundappan on Feb 19, 2011 10:40 AM -
HOW TO CONFIGURE MANAGER or APPROVER USER IN ACCESS REQUEST MANAGEMENT TO APPROVE OR REJECT REQUEST
hi sap gurus,
i configured grc 10 system successfully. I created one user: GR_AR_APP001 and assign following roles:
SAP_GRAC_ACCESS_APPROVER
SAP_GRAC_ACCESS_REQUEST_ADMIN
SAP_GRC_FN_BASE
SAP_GRC_FN_NUSINESS_USER
and I maintained GR_AR_APP001 in access control owners as "POINT OF CONTACT", "SECURITY LEAD" and "WORKFLOW ADMINISTRATOR"
but when i am creating access request for new user and defining MANAGER under user details tab as GR_AR_APP001.
the user GR_AR_APP001 is not receiving any request for APPROVE or REJECT in his WORK INBOX.
can u please guide me how to configure APPROVER or MANAGER to approve or reject request.
I will be very much thankful if you guide me successfully.Hi Colleen,
thanks a lot for your time.
PIC1: I created one user: GR_AR_APP001
and assigned all the GRC ROLES.
PIC2: I assigned owner type to GR_AR_APP001 user : POINT OF CONTACT, SECURITY LEAD and WORKFLOW ADMINISTRATOR in NWBC ACCESS CONTROL OWNERS
PIC3: I created one EUP 980 (copied from default EUP)
PIC4: I maintained default manager as GR_AR_APP001 user in 980 EUP
PIC5: I selected SAP_GRAC_ACCESS_REQUEST process id
PIC6: I created one agent id as ZGRAC_MANAGER11 in which I added approver user id: GR_AR_APP001
PIC7: I saved agent id
PIC8: I added agent id as ZGRAC_MANAGER11 in stage5 in manager stage.
PIC9: I saved
PIC10: I maintained EUP 980 (in which I configured manager as GR_AR_APP001 user) in stage 5 task settings
PIC11: Maintain Route Mapping, I clicked on next
PIC12 and PIC13: I saved and activated.
After this process I created one request for new account and selected the manager as GR_AR_APP001 and one request is created with request no 9000000030.
now I logged into system by user GR_AR_APP001 and checked, there is no request under his work inbox.
please guide me at least one procedure, how to receive request in approver work inbox so that I can learn other procedures to configure approver as per our organization requirement.
thanks for your support Colleen. -
Backend roles neeed for user to access ESS related services
Dear Experts-
Can any one of you please point me to a document or let me know what exact role need to be assigned for a user on backend for him to access all ESS related services in Standard deployment.read the note 857431
1129412 ESS: Authorizations and roles for WD services in ERP EHP3
844639 MSS: Authorizations and roles for WD services in ERP 2005
785345 Copying authorization default values for services
612585 New: Authorization default values for ext. services
The following roles were delivered for ESS with ERP 2005:
SAP_ESSUSER_ERP05: Single role, containing all non-country-specific
functions.
SAP_EMPLOYEE_ERP05_xx: Single role with the country-specific
functions. Each country version has its own
role (with xx = country ID). The corresponding
composite role is SAP_EMPLOYEE_ERP05. -
Help needed in configuring AirPort Express for Warcraft!
Will someone talk me through how to configure my AirPort Express so that I am able to play Warcraft? The downloader is telling me that I'm behind a firewall, however I have configured my Firewalls on my computer to allow Warcraft, and it's still not really working.
I'm not the most tech-savvy, any help would be greatly appreciated.Thank you Duane and others.
This is a very interesting discussion group with a lot of AX users having problems for one reason or another. The main frustration is with, at least for me, the intermittent functionality. As opposed to my wireless laptop, which connects with the network each and every time I turn it on, the AX is good about 75% of the time. And in turn, if iTunes or the Airport Utility can't see the AX there's absolutely nothing you can do to get it to, short of rebooting the laptop, restarting iTunes, etc.
My next plan is to move AX rather close to the wireless router to ascertain if signal strength is the issue.
And I have 'one' last question, are there people out there that have 100% success all the time using AX, especially for streaming iTunes?
Thanks again. -
Script needed to query last logon for users within an AD security group
Hi all,
I'm looking for a vbscript that will query a specific AD security group, and export the following information into an Excel document:
1. Full name of the user.
2. A timestamp of the last logon for each user.
Any help would be great.At the moment I'm using a batch script to attempt to query a few different security groups. Below is a line from the script:
dsquery group -samid <group name> | dsquery * -filter "&(objectClass=person)(ObjectCategory=user)" -attr cn lastLogonTimestamp
There a two issues with the command.
1. The results aren't being pulled from the security group specified.
2. The timestamp is in an unreadable format. I've understand this needs to be converted?
The Powershell option looks handy, but sadly the clients environment is Server 2003 based with no Powershell option. -
Do i need to configure failover group for load balancing? srs3.1
hello
we are installing ssrs3.1 on two sunfire v210 for 20 sunrays
do i have to configure a failover group in order to have load balancing?
thxthx a lot..
finally yes it needs the failover to work with load balancing -
Need functional module or table for user type
Hi all,
I need table or a functional module for getting the user type. plz helpHi,
Can you explain your requirement in a bit more detail. You can also provide all the relevant information regarding this topic.
Hope this will help.
Thanks,
Samantak. -
Nokia need an official, approved method for users ...
1. Not allowing people to discuss methods on here is not helpful.
2. Official advice appears to be contact your Nokia Care Point - these are not Nokia reps but approved third parties - in many countries they are not offering such a service, in other they may insist on a ridiculous charge, or the user has to send the phone away and be without for potentially weeks.
Nokia needs to offer a simple, automated if possible, method to allow people to downgrade Belle to Anna, and previous versions should they wish.Mozilla doesn't have any add-ons to restore the previous look of Firefox. That's why add-ons like [https://addons.mozilla.org/en-US/firefox/addon/classicthemerestorer/ Classic Theme Restorer] were created. What would be the point of a developer making an add-on to simply revert the UI that they made?
Please don't suggest any third-party addons, apps, themes or whatever. If I cared to install any of those then I may just as well download chome.
Honestly, there is no "Mozilla-approved" way to restore the default look in 28. Downgrading to 28 is a workaround although keep in mind this isn't a solution that Mozilla promotes as it wants users to stay on the current release for bug fixes and security risks. Even then, you'll be subject to security risks even on Linux. There's a few ways to go about this
*Downgrade to 28
*Use the userChrome.css file to move the reload button
*Use the Classic Theme Restorer
*Switch to an alternative browser
Maybe you are looking for
-
No GR/IR items cleared after GR/IR clearing by F.19 and SM35
Hi experts, After I execute the GR/IR clearing program through F.19 and then post the batch through SM35, I found the GR/IR open items have not been cleared, even though they match the clearing conditions. I test to create a PO, make the invoice rece
-
Itunes application not opening due to an unknown error (13010)
itunes not opening due to an unknown error (13010) Mac OS 10.4.11
-
I have a subreport for which I have made a Command. The Command does some joins and returns a really big result, if it is run as a stand alone SQL. However, when it is run as a subreport, it does not return that much data (since it is restricted by t
-
How to skip and restart a failed worker using ADCTRL command line?
To skip and restart a failed worker, we can start adctrl, use hidden option (7 or 8 depending on the version). Is it possible to do the same from command line? Thanks in advance. S. Sundar
-
System not resuming from stanby mode ---Solaris10
Dear Frnds, I have a weird issue with solaris 10. We bought a new Sun Ultra45 workstation and i installed solaris 10 in that. The problem is when it goes to standby mode i am not able to resume the system.The only thing i can do is to manually reboot