I need to fix slowness, crashing and error messages upon sending

Using Mozilla Thunderbird for e-mail was working fine for about a year - then in the last month or so, it became extremely slow to send - often not sending at all - even short e-mails without attachments. I get errors such as not able to save to sent-mail and needing authentication, network issues, etc.

And your anti virus package is?

Similar Messages

  • Iphoto crashing and ERROR message when trying to EXPORT to slide show

    I am producing a simple Slide Show to be shown tomorrow at 8am.
    I created it in IPHOTO but an older version. I did some tests last night and today. Worked fine.
    Now that it is done I tried to EXPORT it to Quicktime, as a H.264 Quicktime movie.
    Dimension 1280x 720
    Stills only and no music. Classic with simple dissolves from one photo to next.
    Export and proceed and I leave it alone. After about 1/2 hour or so it crashes and give ERROR message and say
    "unable to process" or complete.
    I have tried several times and changed specs. Still crashes.
    What happened to Apple's Chat Support? Are then not online after a certain time?
    On an IMAC with 16 Gbs of RAM, and have space left on drive. this is not complex.
    anyone? It is due tonight so I can Hightail send it to AV people and it needs to be downloaded
    tonight or EARLY tomorrow for showing at 8am.
    thanks to anyone who can help.
    jc

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    For this step, the title of the Console window should be All Messages. If it isn't, select
    SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
    View ▹ Show Log List
    from the menu bar at the top of the screen.
    In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if iTunes crashed, you would enter "iTunes" (without the quotes.)
    Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    ☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    ☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    In the Console window, select
    DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
    (not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
    I know the report is long, maybe several hundred lines. Please post all of it anyway.
    ☞ If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    ☞ Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

  • App Store can no longer be opened.  Immediate crash and error message "App Store can not be opened because of a problem"

    App Store won't open, error message "App Store can not be opened because of a problem".  I haven't been able to update anything for a week or so.  I have used Disk Utility, Drive Genius, deleting the .plist, all to no avail.  My Mac Mail hasn't worked since the upgrade to Mavericks.  Mavericks can't see my LaCie Cloudbox.  Can any of these be solved by me? 

    I have the same error "XXXX App cannot be opened because of a problem". And I also cannot open iTunes and get the error "This copy of iTunes is corrupted or is not installed correctly.  Please reinstall iTunes."
    Only Apple apps seem to be at issue here...
    Repairing Permissions did not fix this.
    I noticed this after the last Software update. Is there no fix other than re-installing?
    Not happy that an Apple software update killed all my apps...

  • Muse 2014.3 Crash and error message - Image frame thinks it belongs to the page

    I am trying to update an asset in my assets panel, but every time I try to update the asset, relink the asset, or delete the object containing the asset Muse crashes with the following error message:
    "Link updated. Image frame thinks it belongs to the page. but the page disagrees."
    I've sent this file to the Adobe email and linked the forum per requested for this same file, and I've never heard back from Adobe.

    Please send your muse file at [email protected] along with this forum link in subject line. We will try to check the file and will update you over email.
    Thanks,
    Sanjit

  • Slow Speed and error message when clicking on Hub ...

    Hello
    I have just perchased my BT Home Hub 3. All blue lights are showing but I cannot access my Hub Manager. Eveytime I click on the icon the error message says 'Unable to connect to hub'.
    I am connected to the internet fine, although really, quite slow. Not sure whether this is problem on my behalf or BT as the Belkin I had previously also had trouble loading sites however it was somewhat faster.
    Any help would be really appreciated!
    Thank you.

    sorry here 
    ADSL Line Status
    Connection Information
    Line state:
    Connected
    Connection time:
    0 days, 03:10:15
    Downstream:
    2.094 Mbps
    Upstream:
    448 Kbps
    ADSL Settings
    VPI/VCI:
    0/38
    Type:
    PPPoA
    Modulation:
    G.992.1 Annex A
    Latency type:
    Interleaved
    Noise margin (Down/Up):
    15.7 dB / 22.0 dB
    Line attenuation (Down/Up):
    53.7 dB / 31.5 dB
    Output power (Down/Up):
    18.1 dBm / 12.4 dBm
    FEC Events (Down/Up):
    410264 / 149
    CRC Events (Down/Up):
    1575 / 119

  • I keep getting crashes and error messages when trying to use LiveCycle. So far, the most I have been able to is create and name 3 text boxes.

    Despite having uninstalled, reinstalled, change compatibility, run as admin and a host of other "fixes", LC keeps crashing, closing out and otherwise failing to operate. At this point the most I have been able to accomplish has been inserting 3 text boxes and then naming them. As soon as I change the caption name on the 3rd box (or sooner) the program stops working and I get the wonderful message from windows telling me, the program has stopped. I needed the extra input from Windows because, you know, when the program crashes I was just thinking it was naptime.  2.5 hours I have spent so far trying to fix this. Someone please help me!!

    I am not sure what you mean by "Flash Player for steam"; the only Flash Player installers I know is the ActiveX (for Internet Explorer) and the plugin (for other browsers); you can find both at http://helpx.adobe.com/content/help/en/flash-player/kb/installation-problems-flash-player- windows.html#main-pars_header
    [topic moved to Flash Player forum]

  • More Crashing and Error Messages

    Does someone know what is going on with Final Cut Pro 10.0.6? I know that I am NOT the ONLY ONE out here with this continual problem.
    I'm using the SugarFX Rolling Credits and FCP hates it. In fact, FCP doesn't seem to like any of my Third-Party plug-ins. What in the world is going on here?
    This is now the latest "thing" that is popping up regularly whenever I try to do anything with a plug-in. Is a RE-INSTALL of FCP X a possiblity? I've also had problems with Magic Bullet Looks and other stuff. Apple obviously has no concern about these issues. I've seen nothing from them addressing these matters and if I've missed something somewhere, please tell me where to look for a solution!
    Thanks. And BTW, my discs are fine. Everything on my system is in good working order.

    TGTWEETY wrote:
    Is a RE-INSTALL of FCP X a possiblity?
    Yes. I'd suggest uninstalling boh FCP and all your plug-ins. Reinstall FCP and reinstall your plug-ins one at a time to see whether there is one that is causing a conflict for the others.
    Russ

  • Troubleshoting help needed:  My iMac keeps crashing and restarting with a report detail: "spinlock application timed out"  What can I do to fix this?timed out"

    Troubleshooting help needed:  My iMac keeps crashing and restarting with a notice: "Spinlock application timed out"  What can I do?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the page that opens.
    Select the most recent panic log under System Diagnostic Reports. Post the contents — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports.

  • I need help fixing itunes crashes on my old mac

    i need help fixing itunes crashes on my old mac

    Thanks for your reply,
    I have both the silver discs specific to my iMac and Mac Pro models that you receive with your Mac, and a general copy of Snow Leopard that you buy from the store.
    I used the silver disc that is specific for my iMac to install the drivers, and Boot Camp 3.0 on my iMac. But with the Mac Pro, the software is older and only has Boot Camp 2.0, thus I'm wondering if I can simply use the software on the general copy of Snow Leopard I own, or does the silver disc contain specific drivers for my Mac Pro that I need?
    I'm under perhaps the wrong impression that the silver discs that you get with your Mac purchase contain drivers for your specific Mac model which you can't get from the general Snow Leopard disc.
    Thanks.

  • I updated to iTunes 12 and didn't like it. Followed advice to revert to 11.1. Now my iphone won't sync and error message says I need iTunes 11.2 or higher. Apple Download choices didn't have anything between 11.1.5 and 12. What can I do?

    I updated to iTunes 12 and didn't like it. Followed advice to revert to 11.1. Now my iPhone 5 won't sync and error message says I need iTunes 11.2 or higher. Apple Download choices didn't have anything between 11.1.5 and 12. What can I do? Using iTunes 12 is not an option. Many features I used for audiobooks have disappeared.

    The version immediately prior to 12 was 11.4.0.18. Here are direct download links from Apple's servers:
    iTunes 11.4.0.18 for Windows (32-bit) - iTunesSetup.exe (2014-09-09)
    iTunes 11.4.0.18 for Windows (64-bit) - iTunes64Setup.exe (2014-09-09)
    tt2

  • Every time I click on something in GarageBand and error message pops up that says "Error code 25974 was returned by the Audio driver." How do I fix this problem?

    Every time I click on something in GarageBand and error message pops up that says "Error code 25974 was returned by the Audio driver." How do I fix this problem?

    Every time I click on something in GarageBand and error message pops up that says "Error code 25974 was returned by the Audio driver." How do I fix this problem?

  • I'm wondering if anyone has noticed frequent crashing of apps that never crashed before, error messages in their internet connections, and anything else that just doesn't seem right?

    I'm wondering if anyone has noticed frequent crashing of apps that never crashed before, error messages in their internet connections, and anything else that just doesn't seem right?
    I am not able to upload or download any apps.  This has just happened since the 3rd of this month.

    The iPad does not upload apps.
    If you're having problems purchasing or downloading apps using the App Store app tell us what exactly happens when you attempt to purchase an app and what, if any, error messages to your get.

  • TS1702 i have the original ipad it is running iOS 5.1.1 - i tried to install Procreate and error message said this application needed iOS 6 - went back to itunes and downloaded iOs 6 and installed it on computer then resynced the ipad - but doesent update

    i have the original ipad it is running iOS 5.1.1 - i tried to install Procreate and error message said this application needed iOS 6 - went back to itunes and downloaded iOs 6 and installed it on computer then resynced the ipad - but doesent update to 6  - anyone have a suggestion???

    I contacted apple and they checked and yes the originsl ipad cant support ios 6 - so cant use procreate have also checked the procreate website and it appears they advised itunes of this - ideally there should end up being two versions of procreate - one for ios 5 and one for ios 6 -
    dont want to sell the current ipad and get another - at this stage - for the amount of usage it gets not worth the expense
    thanks

  • Help Needed With Scripting and Error Messages

        I am working to build a script to change orders in SAP using Java. I begun by recording steps and combining them.  I am having issues with the Warning and Error Messages.  Can someone help me write language to have the script enter through the warnings or errors if they pop up, but move to the next step if nothing pops up?? Some orders have the message, some do not, some have multiples... etc...
    Thanks!!

    Hello Jamie.
    Getting popup you can use an Loop like below (this is now for Excel VBA coded):
    For Each subWindow In Session.Children
                If subWindow.Name = "wnd[1]" Then
                    On Error Resume Next
                    Session.FindById("wnd[1]").sendVKey 0
                    Session.FindById("wnd[1]/usr/btnANSWER_YES").press
                    Session.FindById("wnd[1]/usr/btnSPOP-OPTION2").press
                End If
            Next
    For Messages in SAP session statusbar like this:
    If Session.FindById("wnd[0]/sbar").Text <> "" Then ...
    To catch error Messages defined by messagetype you can use this:
    If Session.FindById("wnd[0]/sbar").messagetype = "S" Then ... 'sucess messagetype
    If Session.FindById("wnd[0]/sbar").messagetype = "I" Then ... 'Information messagetype
    If Session.FindById("wnd[0]/sbar").messagetype = "E" Then ... 'Error messagetype
    Aso...like we have in SAP
    Hope this help a bit to achieve your requirements.
    Best regards,
    Holger

  • I tried to rollback to ff3.6.17 and it crashed, with error message that it's a corrupt file--how can I get it?

    FF4.0 hangs, so I wanted to rollback to FF3.6.17. But when I attempt to install, it also crashes, with error message that it's a corrupt file. What's the solution? I'm about to leave Firefox if I can't find one!

    See this User Tip by turingtest2
      https://discussions.apple.com/docs/DOC-6562

Maybe you are looking for

  • Apple mobile device service failed to start

    After months finally let itunes auto update its self. this didn't work due to the next error: Service 'Apple Mobile Device Service' (Apple Mobile Device Service) failed to stat. Verify that you have sufficient privileges to start system services. Tha

  • Export km repository

    hi i have doubt can we export km repository if yes how can we achieve that

  • Network preferences reverts to modem

    I Have Verizon Fios on 2 computers. One computer cannot connect any more. It is a G3 running system 10.1. In system preferences the set up is a modem port. I can't change it to built in ethernet as it keeps reverting to modem port. The apply now butt

  • Can I use my old Garageband Jam Packs with Logic Pro X?

    I'm in the process of moving all of my Logic X Library content to an external hard drive and it occurred to me that I still have 4 GarageBand Jam Packs that I might be able to use in Logic X. Does anyone know if there is any real difference in the lo

  • Is it possible to create a guide on labview interface to tell user how to use my program?

    Basically this is the image of the project I'm working on and i want to know if I am able to create a guide that pop out telling the user which button does what when I run the program.  Solved! Go to Solution.