I need to grab the UPC for Each and place it under Case unit

Here's what I have....
Product:      UPC              Unit of Measure
12005         123456           EA
12005          789000          CS
I want it to look like this:
Populate the EA upc into CS upc, basically swap it.
Product:        UPC               Unit of Measure
12005          123456              CS
thanks.

I think you might have got it wrong. Let's try this again:
1) Create a formula named 'CS' with this code:
If {Unit of Measure} = "EA" then {UPC}
2) Create another formula named 'Display' with this code and place it on the Details section:
If {Unit of Measure} = "CS" then Maximum({@CS}, {@Grp1}) else {UPC}
-Abhilash

Similar Messages

TS2621 I have my data retrieval se to manual. When I get mail I get a popup on the screen for each and every e-mail asking if I want to view it or cancel and I have to cancel each one before I can resume any other actions on my ipad. How can I turn this o

I have my mail set to retrieve data manually. When I retrieve mail, I get a popup box for each and every e-mail message asking if I want to view or cancel and must either view or cancel each one before I can use other apps on the ipad. How can I turn these popups off?

Try reset iPad (not Restore)
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

I have Photoshop CS5Extended. I want CS6. I need to know the procedure for purchasing and download

Please help me.

If you click the Buy button you should then be presented with the screen section shown below. If you are not seeing that, try using a different browser.

How to allow the location for faces and places with iOS 4 on an iPhone 3GS?

I installed ios4 on my iphone 3gs, it went well, then the first time i open the camera app it asked me to allow tha application to know the location, firs i said no... now that i really know what this feature does, i would like to allow it, any idea how to allow it again? if i open the camera application again it doesn't ask for it again
thanks

Thanks "justinphilly", following is the solution:
Settings > General > Location Services > Scroll down to camera, and click yes.

Is there a way to get the details for each hit in the portal database WCR_WEBCONTENTSTAT?

Hi,
I need to get the details for each user hit.
Apparently, this table has the IMPRESSIONS column which returns the total number of hitcounts and VISITS which counts the number of unique user who accesses the portal. What I am trying to look for is to get all the details per hitcount. I need to find out how many time a specific user accessed a specific page or iview.
I also used the table WCR_USERPAGEUSAGE, which I get the information of the users counted in the VISITS column in the first table.
I could not get the specific user per hit.
Please enlighten me if this is possible and how to do this?
Thanks!

Hi Catherine,
Why not use the portal activity report iView?
In the portal activity report iView the 3rd option allows you to choose a page for example and see
the user who accessed it and how many times.
Thanks and BR,
Saar

How to reduce the time for each clips up to 0,04 seconds?

Hi, I'm trying to realize my first time laps. I've need to reduce the time for each clips up to 0,04 seconds, but it seems that the minimum time is 0,1 second. There's a solution?

And use a zip file. Many people can't open RARs.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Do I need a different apple id for each device? I have two iPads and an iPod but can only purchase things on the first one. When I go to verify the questions they say they are wrong.

Do I need a different apple ID for each device I have? I have two iPads and an iPod but I can only make purchases with the first one I purchased. It tells me the security questions are wrong but I know they are not because I wrote them down. I have also reset them and my password once. Please help if you can

You can not login into iTunes or the App Store using VPP credentials. You must purchase all apps/book/etc. from the VPP website. Then you can redeem the codes thru itunes/app store or import the codes thru apple configurator. Here is the url for the VPP website: https://volume.itunes.apple.com/WebObjects/MZFinance.woa/wa/login?cc=us
(It will not affect any of the apps you already have but the id can only be used for VPP.)
Cheers,
Alec

HT204053 Do I need a different Apple ID for each of my Apple computers?

Do I need a different Apple ID for each of my Apple computers?

Welcome to the Apple Support Communities
If all of those Macs are for your use, you have to use the same Apple ID on all of them, so you will be able to use all the applications and songs purchased with your Apple ID on them, apart from your iCloud information, in case you have an iCloud account

Get the Count for each row

I'm trying to get the count for each row to total count for each month
Something like this
Hardware | Jan
Monitors | 5
Processors | 137
Printers | 57
etc........
How can I write a query for this. I can get the Hardware column but don't know how to get the next column.

If you can provide more data like sample input DML statements it would have been wonderful..
Assuming is , you need a pivot. Here is an article on basic Pivot..
http://sqlsaga.com/sql-server/how-to-use-pivot-to-transform-rows-into-columns-in-sql-server/
something like this may be..
DECLARE @Input TABLE
Hardware VARCHAR(20),
[Date] VARCHAR(20)
INSERT INTO @Input VALUES('Monitor', '01/01/2014'), ('CPU', '01/01/2014'), ('Monitor', '01/03/2014')
, ('ABC', '01/01/2014'),('Monitor', '02/01/2014')
;WITH CTE AS
SELECT Hardware, LEFT(DATENAME(M, [Date]),3) AS [MonthName] FROM @Input
SELECT *
FROM
SELECT Hardware, [MonthName], COUNT(Hardware) AS Count FROM CTE GROUP BY Hardware, [MonthName]) a
PIVOT (MAX([Count]) FOR [MonthName] IN ([Jan], [Feb])) pvt
Please mark as answer, if this has helped you solve the issue.
Good Luck :) .. visit www.sqlsaga.com for more t-sql code snippets and BI related how to articles.

How to get the texts for each line item for Sales order in a smartform

I'm createing a smart form in which i need to display certain texts for each line item of a sales order. How can i get those??
I'm trying with the table STXH and FM read_text... but i'm not clear how and what i'm getting... can anybody pls help me.....

Hi There,
But then i will be getting only the value. i want to link that against the particular material of the Purchase Order.
Like for ex:
PO No. Material Code        Line Item        Basic        Excise       Tax       Inv Value
0000001 5000251                010               100           16         4.64      120.64
0000001 5000252                020               200           32         9.28      241.28
Can u help me on this?
Regards,
Jitesh

Do we need to create Storage Bins for each Client?

Hi,
I have defined the storage bin structure etc which I could transport.
But does the creation of bins (using LS01N) need to be done separately for each client? If on the test client we dont have access to Create Bins then what is the right approach to get it done.
Thanks.

Thanks. I tried using LS05.
What entries should I make?
I entered Warehouse and Storage Type
The Default Session was showing as RLLS0500 and I left it as it is.
But I am getting Error message "Check you entry for manual storage bin creation".
Any suggestions?
Thanks.

Do we need separate Unattended service account for each SharePoint Server 2013 BI service applications?

SharePoint 2013 - I'm planning to use 'unattended service account' method of Secure Store Service - for Excel, Performance Point and Visio services. I'm about to create Active directory accounts for them.
Question: Do we need separate Active directory accounts for each service
DomainName\ExcelUnattendedAccount
DomainName\PPSUnattendedAccount
DomainName\VisioUnattendedAccount
(or)
Can I have just one Active Directory account DomainName\SharePointUnattendedAccount ?
Are there any drawbacks having a single account? Any best practice around this? For all the three services the data sources are going to be the same.
Subash.S

Security is the only reason you would separate accounts (as these accounts must have access to the source data). There should be no other drawbacks.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Need to grab the client's machine ID

I am working on a Web-Enabled Application and I need to grab the machine identification (Machine Name or TCPIP Address) of the client (MS NT). Does anyone know which package/class I need to use to do this? I have looked around, and cannot seem to find the one I need.
John

Not a problem,
BTW don't blame me if it doesn't work, as I've found with Java, it never quite works how the documentation says it should.
I would check that it return the actual IP address and not the 127.0.0.0 IP for localhost.
Chris

HT201272 How do I remove DRM-protected tracks? I've purchased iTunes match and followed all of the directions for redownloading and I still can't play some of my tracks on the DJay 2 app. Please help! Do I need to purchase these tracks all over again?

How do I remove the DRM-Protection from tracks so that I can play them on my DJay 2 app. I've followed the directions for removal and it's not working...
Will I have to purchase these tracks again?

Apple's official advice is here... HT2905 - How to find and remove duplicate items in your iTunes library. It is a manual process and the article fails to explain some of the potential pitfalls.
Use Shift > View > Show Exact Duplicate Items to display duplicates as this is normally a more useful selection. You need to manually select all but one of each group of identical tracks to remove. Sorting the list by Date Added may make it easier to select the appropriate tracks, however this works best when performed immediately after the dupes have been created. If you have multiple entries in iTunes connected to the same file on the hard drive then don't send to the recycle bin. This can happen, for example, if you start iTunes with a disconnected external drive, then connect it, reimport from your media folder, then restart iTunes.
Use my DeDuper script if you're not sure, don't want to do it by hand, or want to preserve ratings, play counts and playlist membership. See this thread for background. Please take note of the warning to backup your library before deduping, whether you do so by hand or using my script, in case something goes wrong.
(If you don't see the menu bar press ALT to show it temporarily or CTRL+B to keep it displayed)
tt2

Do we need to restart the Tomcat server each time when we modify servlets?

Hi Friends,
Do we need to restart the Tomcat server each time when we modify servlets. Or is there any otherway to achieve the functionalitly?
Thanks and Regards,
JG

JamesGeorge wrote:
Hi kajbj,
Java guys are mostly using TOMCAT,so for me it seems to be the best place.That's not correct. Most people who are writing stuff for the web might be using Tomcat, but there are lots and lots of Java applications that aren't for the web.
Is there any other reason behind your question.Yes, this forum is named "New to Java" and Tomcat questions shouldn't be asked here, even if people knows the answer to you question. You will probably get better and more detailed answers in a Tomcat forum. All othe guys there are actually using Tomcat, and they know the small differences between the different versions, and how they behave on different operating systems. They do also know if you need to make configurations changes, and where you should make them.
So in future, please ask questions in a forum that is specific to the product that you are using.

I need to grab the UPC for Each and place it under Case unit

Similar Messages

Maybe you are looking for