I need to provide red color to the texbox control in list tile

Hi,
I need to provide red color to the texbox control in list tile, please reply if any one knows how to do it.
Thanks,
Vijay.

Hi,
I am afraid that this kind of enhancements/modifications needs some developing which requires a deeper knowledge of Mobile development and sufficient project experience.
Unfortunately it is not possible to achieve this by doing "only" some customizing settings.
Regards,
Wolfhard

Similar Messages

  • I'm using numbers for my students grades. the passing grade is 30 points. what i want to happen is that very students with a grade of less than 30 will have their points it red color. does the IF function can do this? how?

    i'm using numbers for my students grades. the passing grade is 30 points. what i want to happen is that very students with a grade of less than 30 will have their points it red color. does the IF function can do this? how?

    Hi efren
    Conditional format will do this.
    Select the Cells, then Menu > Format > Show Conditional Format Rules
    Regards,
    Ian.

  • What is the reason for the Red color for the swap values?

    Dear experts,
                         May I know why the swap values displyed while executing the ST02 T-code are in Red color?

    System performance tuning is continuous work. Once you will change the parameter then you need to monitor the system if you continuous getting Red in St02 then you need to again fine tune the parameters. So, it is a continuous improvement that happens over time. If you want to analyze it then you can check ST03n about how much load is there on the system and based on that you can change the parameter.
    Thanks
    Sunny

  • AP's 1240 Change to Red Color in the WLSE

    Hi
    I work with the WLSE and I connect more APs 1240 in my network, but when I try to add these devices appear in red color or in other cases in yellow color. I check the IOS version of that Devices and does not appear to be that.

    No Msr, Thanks for your opinion, but That AP's was installed and worked in the network. I think That problem it's because the Ap's has interference. When I instal other Ios Version, I saw the Ap's change to yellow color and before that change I saw The Ap's int red color.
    Waht do you Think??

  • How can I change the red color of the news theme?

    I would prefer to use a different color for the news theme in iMovie.  Red doesn't look good with my pics.  How can I change it from red to another color?  Is that possible?

    try this
    import javax.swing.*;
    import java.awt.*;
    class Testing extends JFrame
      public Testing()
        setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        setSize(250,75);
        setLocation(400,300);
        JPanel jp = new JPanel();
        JToggleButton jtb = new JToggleButton("Toggle me");
        jtb.setUI(new MyUI());
        jp.add(jtb);
        getContentPane().add(jp);
      public static void main(String args[]){new Testing().setVisible(true);}
    class MyUI extends javax.swing.plaf.metal.MetalToggleButtonUI
      public Color getSelectColor(){return Color.BLACK;}
    }

  • How to get color in the final row of table view( table control)

    Hi,
    iam having a table control displayed with 10 records as output,in that i need to provide a color for the final row since it is total inorder to show difference from other records.
    Kindly advise me on this.
    Thanks & Regards,
    Nehru.

    Hi Nehru,
    Checkout [THIS|Re: set color for a particular row in table view] thread .
    [This |http://www.sapdesignguild.org/resources/htmlb_guidance/table.html#at] Might also help you.
    Regards,
    Anubhav
    Edited by: Anubhav Jain on Jan 4, 2009 7:34 AM

  • Re: my notebook doesn't display the red color

    I think I have the same or a similar problem.  I have a AMD A4-6210APU with radeon r3 graphics 1.8 ghz running 64 bit windows 8.1.
    Since updating the graphics driver last week I have noticed the colour red seems more pink or purple.  This is particularly notable as a lot of my buttons and icons contain scartlet as the principle colour.  I only purchased the laptop in August so I doubt this is due to a deteriation of the hardware and therefore seems to be an issue with either the display driver or the display settings.
    I have attempted to rectify the problem by resetting the display settings to default.
    This partidular model does not appear to have any contrast settings built into the controls, therefore I have no way to adjust the colours manually.

    Hello @pittstop,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I have read your post on how your notebook doesn't display the red color on the screen, and I would be happy to assist you in this matter!
    To ensure that your system is installed with the correct graphics software, I recommend installing the original software and hardware drivers that first came with your computer. This can be done by following the steps in this document on Using Recovery Manager to Restore Software and Drivers (Windows 8). Once the software is installed, please update the chipset and graphics drivers Using HP Support Assistant (Windows 8).
    I would also encourage you to post your product number for your computer. Below is a is an HP Support document that will demonstrate how to find your computer's product number. In addition, it will also help if you indicate whether your operating system is 32 or 64 bit. The more information you can provide, the better!
    How Do I Find My Model Number or Product Number?
    Is the Windows Version on My Computer 32-bit or 64-bit?
    Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • Need to send Automatic mails when the report successful or Fail.

    Hello Experts,
    Created one report for reconciliation to check BW and R/3 figures.
    There are exceptions designed using reporting Agent settings on the same report.
    (When the values from R/3 to BW are matching it shows Green color and if the values are not matching report shows red color in the columns.)
    There are some mandatory variables for Company code, Period and Currency Type.
    Selections for  Company code and Period are fixed but We have three currency types (00,10,30)
    Reports needs to be executed for three currency types.
    Requirement is that
    when the report is executed for One currency type  (Ex u2013 00)
    If the key figure column shows Green color , Immediately mail has to be sent to necessary mail IDs saying the status successful.
    If the key figure column shows Red color , Immediately mail has to be sent to necessary mail IDs saying the status Failed.
    Like this the same report has to be executed for other two currency types and send the the same status as above phenomenon.
    Sending mails can be taken care by BASIS people with SMTP configuration.
    I want to know the development needs to be done from BW side.
    Are there are any settings in BW to send the message as Successful  when the report shows green color and message as failed when red color appears in the report.
    Regards,
    Siva.

    Hi,
    As i understand you need to set up an alert framework.
    Please check :
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b6d59590-0201-0010-5f9d-adb9f6b14d80?quicklink=index&overridelayout=true
    This can also be achieved using BEx broadcaster
    Please check :
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/efdbd593-0e01-0010-4eb1-a09ffedd550a?quicklink=index&overridelayout=true
    Hope this helps.
    -Vikram

  • Need to provide F4 functionality to customer field on SRM Screen

    Hi all,
    I was created 4 input fields on SRM WEB screen. I need to provide F4 functionality for the first field.if user clicks on the find button it has to show list of all values related to the above mentiones 4 fields. in this four fields one field is the key field. if user select on key field the corresponding values has to be populated in the reamining 3 fields along with the key field.
    how to achive this. is there any badi for this.pls suggest me the sample code if any thing is  there.

    Hello,
    If you are using custommer fields according to notes 672960 and 458591, the F4 option are self-generated when defining in the include (CI* or INCL_EEW_PD* ) a foreign key or a search help.
    Rgds,
    Pierre

  • Jasper Export to excel: changing background color of the cell/field

    Hi all,
    I have designed a report containing a set of 5 different fields. All these are STRING values.
    Among these are two fields named: BUDGETED and ACTUAL.
    I want to show the data corresponding to ACTUAL in red color if the value of ACTUAL is greater than BUDGETED when exported in excel format.
    The value itself should be displayed in red color or the excel cell should have a color red
    Can someone please help me in this? How can we implement the logic to compare these two values?
    Thanks in advance.

    You are using Jasper and you thought: hey, let me post a question in the Oracle Reports forum?

  • Request status in RED color.

    Gurus-
    I am loading the data from Data Stage to BW.
    First load went thru with out any errors. When Data Stage team scheduled load for second time then I see Red indicator in "Request Status" as well as in "Status" tab.
    When I go to details tab I see RED in "Extraction (messages) : Errors occured", Transfer (IDOCS and TRFC) :Errors occured and "Susseq. Processing (message)".
    When I expand " Extraction (messages)" I see "1000 Records sent (1000 records  received)" in red color.
    and if I expand "Transfer ( IDOCS and TRFC)  "it says "Data Package 1 : arrived in BW ; Processing : 2nd processing step not yet finished "" in red color. all the Info IDOCS are in green color.
    But I see Transfered and added records in mange screen of DSO. Can I activate the DSO by changing the indicator to green from red?
    Pls suggest with ur valuable suggestions..

    Hi,
      In the monitor right click on the data package1 and do a manual update.
    Jaya.

  • Red color for negative values with $ symbol in Excel

    Hi All,
    We have a custom XML Publisher Report developed using XML rtf template. There is a number field in that template and the field is number formatted with $. i.e. output will look like this.
    $100
    $200 ...
    the issue which we are facing is when that number field is having negative value, then it is displayed in red color.
    and the client dont want that red color to appear in excel.
    ex:
    -($100) is displayed in red color in the excel output. This should be displayed in black color.
    Can anyone help me on this..
    Thanks
    gtungala

    In excel, under format cells, under category -> Number, look under Negative Numbers to see if the selected option is a number format in red. I think selecting a regular format (in black) should fix the issue..
    Thanks!

  • How can I change the color of the new tab button?

    Hi,
    I was wondering if there was a way to change the color of the new tab button, list all tab button, and tab groups button. I have been searching for personas that don't make it hard to see those particular buttons for days now, but since I can't seem to find any I was hoping there was a way to change those buttons' colors to make them more visible with the personas.
    [http://i54.tinypic.com/2ui9351.jpg Here's a picture of the situation]
    I want to change those 3 buttons (and the "show more bookmarks" button that appears when the window is too small to show them all) to white or some other more visible color. I know there's a way to change the background of those buttons, but I'd prefer if I could change the '+' button itself in the new tab button for example. Is there any way to do it? Because it's so hard to find personas that don't make it hard to see text or buttons.
    Thanks.

    jus an example
    Ian F
    Since LabVIEW 5.1... 7.1.1... 2009, 2010
    依恩与LabVIEW
    LVVILIB.blogspot.com
    Attachments:
    Blinking_Indicator_2003.vi ‏27 KB

  • Changing the color of the text in a Menu control with CSS

    I want to change the text color of the Menu control in JavaFX. When I create a MenuBar in Scene Builder - it comes with 3 Menu controls by default ("*File*", "*Options*", "*Help*"). I have tried assigning a separate CSS id for each Menu control and using various combinations of properties to influence the text color, but can't seem to get it right whatsoever. What I want to achieve is, i.e., display *"File*" in black, instead of default white.
    FXML here:
    <?import java.lang.*?>
    <?import java.net.*?>
    <?import java.util.*?>
    <?import javafx.scene.control.*?>
    <?import javafx.scene.layout.*?>
    <?import javafx.scene.paint.*?>
    <AnchorPane id="AnchorPane" maxHeight="-Infinity" maxWidth="-Infinity" minHeight="-Infinity" minWidth="-Infinity" prefHeight="400.0" prefWidth="600.0" xmlns:fx="http://javafx.com/fxml">
      <children>
        <MenuBar id="modBar" layoutX="176.0" layoutY="122.0" styleClass="modBar">
          <menus>
            <Menu id="modItem" mnemonicParsing="false" styleClass="modItem" text="File" />
          </menus>
          <stylesheets>
            <URL value="test.css" />
          </stylesheets>
        </MenuBar>
      </children>
    </AnchorPane>CSS here:
    .modBar
        -fx-background-color: white;
    .modItem
        -fx-color: black;
    }I have also tried extracting the caspian CSS and playing with various properties related to *.menu* and *.menu-bar*, but still can't see the one responsible for the color of the text in menu controls?
    Any help would be greatly appreciated.

    I think I have found the answer (just sad that it took me half a day):
    .menu .label
         -fx-text-fill: black;
    }

Maybe you are looking for