REP-0503: You did not specify the name of a report

I am getting the above error while calling a report from a form in Oracle 9iDS.
I have created anode in the report node of the form(TESTREP1) this is same as my report rdf name which is stored in C:\temp\9ids folder, report_path points to this folder,OC4J is start, in the properties of TEST_REP1 in the form i have set:
filename C:\temp\9ids_test\test_Rep1.rdf
My code on a when-button-pressed trigger is
DECLARE
     repid report_object;
     v_Rep varchar2(100);
BEGIN
repid := FIND_REPORT_OBJECT('TEST_REP1');message(get_report_object_property(repid, PORT_FILENAME));
-- i can see this message showing the filename as
--C:\temp\9ids\test_rep1.rdf
v_rep := Run_report_object('TEST_REP1');
message('test report')
-- i can see this message but fails to run the report
--with REP-0503
exception
     when others then
     message('Error: '||sqlerrm);
END;
where am i wrong?
Regards,
Sumita

The following code also doesnt work
DECLARE
repid report_object;
v_Rep varchar2(100);
BEGIN
repid := FIND_REPORT_OBJECT('TEST_REP1');
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_DESTYPE, 'cache');
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_DESFORMAT, 'pdf');
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_COMM_MODE, ASYNCHRONOUS);
v_rep := RUN_REPORT_OBJECT(repid);
exception
     when others then
     message('Error: '||sqlerrm);
END;
In Java Console error message
<<<
Loading http://lra10241:8888/forms90/java/f90all_jinit.jar from JAR cache
connectMode=HTTP, native.
Forms Applet version is : 90290
oracle.forms.net.ConnectionException: Forms session <3> aborted: unable to communicate with runtime process.
     at oracle.forms.net.ConnectionException.createConnectionException(Unknown Source)
     at oracle.forms.net.HTTPNStream.getResponse(Unknown Source)
     at oracle.forms.net.HTTPNStream.doFlush(Unknown Source)
     at oracle.forms.net.HTTPNStream.flush(Unknown Source)
     at java.io.DataOutputStream.flush(Unknown Source)
     at oracle.forms.net.StreamMessageWriter.run(Unknown Source)
>>>>>
Please help its urgent

Similar Messages

  • REP-0503: You did not specify a name of the report

    would you tell me where I could find the detail help for report error message. thks!

    Hi,
    Though you can search for it in the online help its too slow and cumbersome to do so. Instead check
    1)whether this reports exist in the reports_path of your server..the path that its searching for reports you can get it using the showenv command of the rwservlet like
    http://youriasservername:port/reports/rwservlet/showenv?server=<your reports server>
    2) if you are calling this report from forms make sure that the dummy report object that you have inthe design time does have a report name.
    HTH
    Elango.

  • Excpetion "You did not specify the transaction currency burden amount".

    Hi,
    When I am running "PRC: Interface Supplier Costs" then its firing another Program i.e., "AUD: Supplier Costs Interface Audit". In the second Program's output I am getting a message "You did not specify the transaction currency burden amount".
    I created and approved an Expense PO and then I created an Invoice (matching that PO) and did the Payment for that Invoice and generated accounting. After that I ran "PRC: Interface Supplier Costs" to transfer the amount to my Project. The Program is ending up with the exception that "You did not specify the transaction currency burden amount".
    What could be the reason and how to solve it.
    Regards,
    Khan.

    Hi
    Check if your project is set up as burdened, and if the expenditure organization & expenditure type of the PO distribution are supposed to be burdened. Verify that burden multiplier is available in te active burden schecule.
    Dina

  • ERROR: "You did not complete the entire form.  Please enter your country."

    When I tried to download a song tonight, I got a message that said that my billing info had changed and that I needed to verify it before I could purchase any music. On the "Edit Payment Information" page, I put in all of my info (my address was missing), and hit done. I get the error: "You did not complete the entire form. Please enter your country." Well, the country field is not editable, and but it says "United States," which is the right country. I can't get passed it, so I can't download anything. I'm running the latest version of iTunes... but I haven't purchased anything since.
    The other thing that concerns me is that I didn't change any billing info, so this is a bit strange. Does anyone have any ideas of what's going on? Thanks!!

    Just in case this ever happens to anyone else, here is how to fix the problem (THANKS, ITUNES SUPPORT)!!
    1) Sign out of the iTunes Store by choosing Sign Out from the Store menu in iTunes.
    2) Visit Apple's My Info website:
    http://myinfo.apple.com
    3) Choose your country and preferred language. Then enter your iTunes Store account name and password and click Continue.
    4) Choose Address Book from the menu on the left. On the Edit Address Book page, look at your shipping addresses at the bottom. If you have multiple shipping addresses, remove any out-of-date or duplicate addresses by clicking Delete. Also, make sure the state or province field is filled out correctly for each address. To edit an address, click Edit.
    5) Now choose Phone Numbers from the menu on the left to look at your phone numbers. The area codes should be in the area code fields and the phone numbers should be in the phone number fields. If an area code is missing, or if it is in a phone number field, your account information may not save properly.
    6) Make any other necessary corrections, then click the Save Changes button.
    7) Click Log out in the upper-right corner.
    When you make your next iTunes Store purchase, you will be asked to review your billing information. At that point, you can change your information or simply click Done. After that, you should be able to purchase items.

  • 3GS 3.0.1 - Cannot send mail, You did not specify any recipient

    Whenever I send a message from iPhone with MobileMe account and then resync the account with server (Push is off), the very same message, already sent with success, appears in Outgoing folder and error pops up saying:
    *Cannot send mail, You did not specify any recipient*
    See the picture below:
    http://gitarzysta.com/iphone/error1.jpg
    It cannot be deleted, either - error message pops up saying: *Unable to move message*
    http://gitarzysta.com/iphone/error2.jpg
    Important: it was sent and received successfully. It is just either iPhone, MobileMe or both that have problems to sync correctly.
    On my Mac that I sync with this MobileMe account all is fine.
    What can be wrong? There was an old topic here, from 2008, where several users of 3G had exactly the same issue, but no root cause or solution was provided.
    Thanks!
    Message was edited by: gitarzysta

    Try deleting and manually recreating the account on your iPhone.
    If you transferred the account settings from your Mac via the iTunes sync process - selected under the Info tab for your iPhone sync preferences with iTunes, deselect this for your iPhone sync preferences followed by selecting Apply before doing so.

  • Cannot Send Mail - You did not specify any recipients

    Hi all,
    I have an email stuck in my outbox which has the "This message has not been downloaded from the server" issue I have seen on this forum. Everytime I go to my email folders list, I get the 'Cannot Send Mail - You did not specify any recipients' error message. I am unable to trash it, move it as I get the 'Unable to Move Message' error.
    Any ideas how I can remove this message and clear my outbox!?
    Thanks,

    Me too! This is very annoying. I LOVE Apple but this new 3G keeps on throwing curveballs at me. I, too, deleted my e-mail account from my iPhone to get rid of this "unsent message" but with Apple you shouldn't have to do that! Certain that it will happen again, I'm interested if anyone comes up with any fixes so that next time we don't have to delete/add e-mail account.

  • HT5699 i can't buy  a song because it ask me for security questions and i answer and it says you did not  provide the right answer

    i can't buy  a song because it ask me for security questions and i answer and it says you did not  provide the right answer

    Go back to the article you asked this question from and pick a method of contacting Apple. Posting in these boards isn't one of them.
    (103148)

  • Genius - You did not complete the entire form

    When I try to sign in to Genius with my Apple ID it gives me the message:
    You did not complete the entire form
    The only bit to fill in is the Apple ID. I tried using me.com but that didn't work either.

    pscurran wrote:
    Jeez I have survived such tricky stuff with this kit! I had the same problem here. I did'nt see it either and probably never would have! Thought that was AOL. Are Apple forms becoming more cryptic or I am becoming more stupid? I hope not, on both counts. Thank you. Paul
    No, it's been that way for years, ever since Apple & AOL agreed to let AOL members access the store from AOL.

  • "You did not have the privilege to make changes"

    Hey all, I am new to the mac scene, and successully managed to transfer my itunes library from PC format to Mac format with the songs all stored on a USB Hard drive which works great.
    However I have tried to rip a CD today and I get the following message:
    "Error occured while converting the file - You did not have the privilege to make changes"
    Why is this happening? Ive read that it may be a permission issue on the USB HD?
    I have only had my mac for 1 day so my knowledge is very limited.
    EDIT - Actually, could this be to do with how the USB is formatted? NTFS.
    If so, will I have to buy another USB Hard Drive and literally drag and drop everything from the old one to the new one, formatted the correct way?
    Thanks
    James

    Jolly Giant wrote:
    baikey_uk wrote:
    could this be to do with how the USB is formatted? NTFS.
    yes.
    Mac OS X can natively read from, but not write to, NTFS formatted drives.
    If so, will I have to buy another USB Hard Drive ... formatted the correct way?
    that would be ideal. format the drive for Mac (HFS+).
    alternatively, you could try installing the _*NTFS 3G*_ driver on the Mac.
    JGG
    Thanks for that, I will download and install later.
    Are there any limitations to using the above driver as against buying a new USB HD?

  • You did not get my point!

    I think you did not get the point!
    I mean that every thing is ok on settings, but when i back up the contact from the phone to uploaded in the icloud.com
    I go directly to iCloud and no contact inside it!
    My que is how to upload the contacts from my iphone 5s to my account on icloud.com?

    I believe I understood you, but back up has nothing to do with whether you can sync contacts or not.
    Contact syncing requires you enable syncing at settings > iCloud > contacts, if that isn't working follow my previous suggestions.
    You can't visit iCloud.com from a mobile device.

  • I have converted/copied my itunes oto mp3 format to play on my PC. unfortunatly I didi not specify a different folder fro the mp3's. I therefore have itunes side by side with my mp3's all in the same folder. How can I remove the mp3's into another folder.

    I have converted my itunes on my imac to mp3 format so i could play them on my pc. unfortunatly  i did not specify a seperate folder for the mp3's to be sent to once converted.
    i now have itunes and mp3's side by side in the itunes media folder. this has the effect of doubling my library.
    how can i get rid of the mp3's from this folder en mass, other than erasing them one by one, there are 7000!!!

    Click on 'Music' in the iTunes sidebar. Look to see whether you have a 'Kind' column:
    If you haven't, choose 'View Options' from the 'View' menu and check 'Kind':
    Now go to the Music list again and click on the label of the 'Kind' column. This will group all your AACs and MP3s together. Locate the MP3s: click on the top one. Hold the shift key and click on the bottom one to select them all. If you want to save them drag them to a folder on your Desktop. Then hit 'Delete'. IMPORTANT: when promted, choose to have them moved to the Trash, otherwise they will be removed from the list but kept in the actual library.

  • Due to NAS issues, when I started a new time machine backup it did not have the old backups available. My question is do I need to delete them or will time machine automatically reclaim the space?  Only one Sparse Bundle, same name.

    Due to NAS issues, when I started a new time machine backup it did not have the old backups available. My question is do I need to delete them or will time machine automatically reclaim the space?  There is only one sparse bundle but when I enter time machine I don't see my historic backups.  I use a synology DS212 for my time machine.  Started a new backup which is 218gb but it says 618 gb is occupied  therefore it looks like 2 or 3 backups are still on the disk. Before my NAS issues the last backup was in 2014.  As you can see there is a second sparse bundle from 2012.  Not sure what that is.

    This is an old message now, but what happened to me similarly was:
    I had a major computer crash and through complicated pathways ended up reinstalling (Mavericks) as a new user (long story).
    At least I had good Time Machine backups on an NAS drive (Synology DS212j), or so I thought - when I started Time Machine up again, the old backup file was gone, replaced by a new one using my "new computer" name. The old file was gone both by directly mounting the NAS drive and by clicking "Enter Time Machine".
    It's like I had {OldShareName}.sparsebundle and then it was replaced by {NewShareName}.sparsebundle, all of the old info vanished.
    (I have spent a week finding old files elsewhere and have completed a satisfactory self-restore. It pays to "archive" [my own variation of] as well as "back-up".)
    My belief is that if this were a wired-netword-drive, e.g. plugged right into my iMac with a USB cable, then the old file would have remained.
    But this is an NAS drive, connected directly to my Airport wireless router, and I don't know the significance of the fact that it stores its Time Machine backups as "sparsebundle" files rather than simply as plain(er) files.
    As usual when things get complicated with computers (not just Apple computers) there was never a warning message. Something like "YOU'RE ABOUT TO DELETE A TIME MACHINE BACK-UP FILE!!!" would have made my life a lot simpler.
    BTW, I did try a "restore from Time Machine" option the first thing I had my "new computer" (old hardware, 2009 iMac) up and running, using Migration Assistant, and it ran for many hours and then failed in the wee hours - what that has to do with anything I'm not sure.
    I'm not sure that I have a question about this other than "why do these things happen to me?", but it's a warning. Apart from that I've been very happy with the stability and reliability (but not the cost or set-up complexity) of NAS vs. directly-cabled external drives.
    Charles

  • HT1386 I bought a new Mac.  I  previously had my iPhone and iPad synched to my PC.  I can't get my playlists transferred and when I try to synch my iPad I get the following message: The iPad "name" cannot be synched. You do not have the privilege to make

    I bought a new Mac.  I previously had my iPhone and iPad synched to my PC.  I set up iTunes but my playlists did not come over from my PC.  I can redo that without a problem...BUT...I just tried to synch my iPad with my Mac and I got the following message: The iPad "name" cannot be synched.  You do not have the privilege to make changes.  I deauthorized my PC and have authorized my Mac...it just won't synch.  Help!!

    I bought a new Mac.  I previously had my iPhone and iPad synched to my PC.  I set up iTunes but my playlists did not come over from my PC.  I can redo that without a problem...BUT...I just tried to synch my iPad with my Mac and I got the following message: The iPad "name" cannot be synched.  You do not have the privilege to make changes.  I deauthorized my PC and have authorized my Mac...it just won't synch.  Help!!

  • OAS: The request did not specify a valid virtual host.

    Hi,
    we install the OAS 3.01 on our system (NT 4.0 sr 4 Worstation).
    we start the AdminListener with:
    oswctl start ADMIN
    the listener starts sucessfully.
    trying accessing on the ADMIN-Page with the IE 4.0
    (http://[IP-adress]:8888)
    the following message occured:
    The request did not specify a valid virtual host.
    any idea ???
    Thank
    Martin
    null

    Dennis Bourgeois (guest) wrote:
    : Peter Siket (guest) wrote:
    : : Martin Behrmann (guest) wrote:
    : : : Hi,
    : : : we install the OAS 3.01 on our system (NT 4.0 sr 4
    : Worstation).
    : : : we start the AdminListener with:
    : : : oswctl start ADMIN
    : : : the listener starts sucessfully.
    : : : trying accessing on the ADMIN-Page with the IE 4.0
    : : : (http://[IP-adress]:8888)
    : : : the following message occured:
    : : : The request did not specify a valid virtual host.
    : : : any idea ???
    : : : Thank
    : : : Martin
    : : Hi Martin,
    : : we learned that OAS 3.01 only accepts hostnames. The only
    way
    : to
    : : enable communication is to supply a hosts-file with the
    : : appropriate entry. I don't know why but so it works.
    : : Peter
    : Martin,
    : I'm running OAS 4.0.8 but here is a thought... In 4.0.8 if you
    go
    : to the network properties for your listner and add the IP
    address
    : there then it works. I also found that if you are using
    : something like a Cisco domain controller to do load balancing
    : you
    : will want to list the IP address of the Domain Controler in
    there
    : as well.
    : Dennis
    If you access using the hostname, this will be passed onto the
    Application Server in addition to the IP address. The
    Application Server will use the hostname details to determine
    the listener files to use under the $ORACLE_HOME/ows path. This
    means you can more than one set of OAS files and therefore in
    theory service two different hostname addresses mapped to the
    same IP address.
    Nigel.
    null

  • Windows cannot access the specified device, path, or file. You may not have the appropriate permissions to access the item.

    Hi, i'm a Windows 7 user of HP Pavilion dm4.
    It has been weeks since iTunes works properly on my computer. I'm here to seek help from professionals or people who had encountered it before. Whenever I double-click on iTunes, it prompt me a message "Windows cannot access the specified device, path, or file. You may not have the appropriate permissions to access the item." But another thing is, i'm the only adminstrator on this laptop. If I don't have permission, who has? Sigh.
    I had tried uninstalling and installing iTunes from official website many times but to no avail.

    Hi,
    Also, please make sure your current user is a administrator account and have permission to open the file.
    Right-click the file or folder, and then click Properties.
    Click the Security tab.
    Under Group or User names, click your name to see the permissions you have.
    Have you installed 3rd software in you computer? please turn off them temporarily to check if this issue still occurs.
    Here is an article you can refer to.
    http://support.microsoft.com/kb/2669244
    Andy Altmann
    TechNet Community Support

Maybe you are looking for

  • NI PCI-1588 Windows XP Accurate Timing Device

    Hi, I see this product has been discussed on this forum here before so I hope you can help me! (Maybe Tom) I need to log socket messages to and from an electronic trading platform with microsecond accurate timestamps and would also like to be able to

  • Can I use an old Quick Time license number?

    I bought Quick Time pro a few years ago and I just upgraded to a new iMac. Can I use that old license number? Or do I have to pay to upgrade to the latest version of the Pro software? Thanks.

  • All of my passwords disappeared 11/14/14 after Firefox update to 33.1.1.

    Am in panic mode as I am computer illiterate. Is there a way to recover them & if so, can a dummy do it?

  • Animation in Photoshop

    Hi, I have made my first animation in photoshop using rotoscoping technique, drawing on top of a quicktime video. I have made a new layer for every frame, and set the limit to every 2 frames. Everything was fine and I was about to export the animatio

  • Purchase Order prices picked up the wrong price

    Hello All, After we created an A/P invoice with 3% discount on the total, the same items on new purchase order shows a lower price. For example, itemcost is 10.44, but it shows on PO for 10.13. Looks like 3% has been applied to each single item. But