I open a app 5 minutes later the sound cuts off then It comes back like 1 minute later but only the app soundtrack no sound effects?

I have a warranty on best buy but they had supposibly "fixed it" yrs I have turned it off and on best buy restarted my ipod it worked for like 3 days then started
Doing it again please help

See:
iOS: Troubleshooting applications purchased from the App Store
Contact the developer/go to their support site if only one app.
Restore from backup. See:
iOS: How to back up              
Restore to factory settings/new iPod

Similar Messages

  • When I goto app store and select updates and then purchased it spins the hour glass and then go's back to home screen, anyone know the fix?

    When I goto app store and select updates and then purchased it spins the hour glass and then go's back to home screen, anyone know the fix?

    ATtempt to power off your device and power it back on, if that doesn't work reset all settings should resolve it for you

  • My Mac won't fully start up.. I push the power button, the apple sign pops up and the loading circle and then  a bar loading and as soon as the bar is done loading the computer cuts off again. It's like it attempts to start up like it's updating something

    My Mac won't fully start up.. I push the power button, the apple sign pops up and the loading circle and then  a bar loading and as soon as the bar is done loading the computer cuts off again. It's like it attempts to start up like it's updating something and then after the bar is full, it shuts off. Please help

    Hpullen wrote:
    A1278 and I'm not sure about the OSX
    http://support.apple.com/kb/HT4132 How to identify MacBook Pro models
    http://support.apple.com/kb/HT1159 Mac OS X versions (builds) for computers

  • Help! After restoring my computer from Carbonite, My e-mails are corrupted. Each one multicorruptedplies a bajillion times! I erase them from the folder, erase them, then they come back. I have three mailbox accounts,each one does the same.

    eHelp! After restoring my computer from Carbonite, My e-mails are corrupted. Each one multiplies a bajillion times! I delete them from the folder, empty trash, them, then they come back. I have three mailbox accounts,each one does the same.

    This is the Mac App Store forum.
    For your specific issue, you'll get more feedback in the Snow Leopard forum.
    https://discussions.apple.com/community/mac_os/mac_os_x_v10.6_snow_leopard

  • HT1688 my iphone just completey shut off, and wont come back on, even when connected to the charger

    my iphone completely turned off and will not come back on, even when connected to the charger. how can i turn it back on?

    Hello ozzy9294,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Display has no backlight or dark screen
    Toggle the ringer switch to see if the unit vibrates. If it does, it could be that iPhone is getting power, but is not displaying any image.
    Try turning iPhone off and then on again.
    While connected to the iPhone charger, try to reset the iPhone.
    If the low-battery screen appears, charge the iPhone.
    Best of luck,
    Mario

  • HT1688 My new iphone 5c has started blacking out then the apple appears and then it comes back on.  What is causing this?

    Is anyone else having the same problem...  My iphone 5c will be working fine, then fade away and the apple will appear.  It takes a minute and then the phone is back up and working?  What is causing this to happen?

    Phone is under warranty. Take it back to the store for exchange.

  • How can I have 2 versions of Numbers but only 1 app?  Read

    This is the weirdest thing I ever saw. It's driving me crazy and making me look like  fool.
    In an earlier post I mentioned that something happened to my numbers.  The window looked very different from this afternoon when I created 2 new spread-sheets.  I must have sounded crazy to qinn below in my answer.
    Now I clicked the Numbers icon in the dock and it opened to my original Numbers 09 (2.3).  So I tried to open a sheet I created a few hours ago and it says I can't open that file, I need a later version of Numbers. OMG
    Just a though so I opened the finder, went to the applications folder and I only have ONE Numbers.app.  So I clicked on that and low-and-behold the new 3.2.2 opened!!!!!!!
    How can I have 2 versions of numbers but only one app????  I thought I was going crazy.  Now I know something isn't right.
      HELP PLEASE!!!
    Allen

    Hi Allen,
    Look in your Applications folder for an other folder "iWork '09".
    Breathe.
    Know that you are not alone. Wayne made a user tip and it is not just for you.
    Need newer version of Numbers to open file
    quinn

  • Audio cuts off then video moments later for Jabber users when content is shared during a multipoint VC

           If a presentation* is being shown from a VC end point/or by Jabber, the audio cuts off, then the video of the Jabber user freezes. The call has not ended on our end we can still hear and see them. A few moments later their video on our end freezes and the audio is lost. The call is finally terminated a few moments after.
           When this happens to the Jabber participant they either have to restart Jabber or in some case have to reboot their PC
           The Jabber participant can be cut off from their class 2 to 3 times  throughout the duration of the class
           This happens over all the MCU\blades, so doesn’t  appear to be blade specific
           Only appears to happen in multi –point conferences not in point to point calls
    *Presentation: This can be anything from a word document, to a PowerPoint presentation to a web browser
    The warning they receive says:
    The application has encountered a terminal problem.
    Location:
    Message: assertion failed. (link_ret = = GST_PAD_LINK_OK)
    Domain: <no domain>

    Is this problem specific to Jabber clients, or Jabber Guest? If the former, you'll have better luck over on the Jabber client forum:
    https://supportforums.cisco.com/community/4551/jabber-pilot-support

  • Hi, I have an iphone4 and all of a sudden none of the apps (except the ones that came with the phone) will open. The screen goes black then it goes back to the homescreen. Any ideas? Thanks in advance!

    Hi,
    I have an iphone 4 and all of a sudden none of the apps will work, except the ones that came with the phone. When I open them the screen goes black then it goes back to the homescreen.
    Also when I plug the phone into itunes it only gives me the option to either restore or eject the phone. Up until today I never had any problems, I sync it regularly and all the software (inc itunes) is up to date. The last time I backed it up was about a month ago when I got the phone, (a replacement as my other iphone4 had loads of problems) so I don't want to have to restore it and lose everything off it!
    Any ideas? Thanks in advance!

    Sounds like the device was dropped at some point and damaged as a result.
    Take it to Apple for evaluation and a replacement.

  • A camera icon (with the ends cut off) is on my lock screen, and it wont open the camera app. how do i fix this?

    A camera icon (with the ends cut off) is on my lock screen, and it wont open the camera app. how do i fix this? does anyone else have this problem with the iphone 4s?

    What do you mean "with the ends cut off"?
    You swipe the screen upwards starting on this icon to open the camera app.

  • When I listen to music on my iPhone and pause it, if I come back to it later, the playlist has started over. I have a 4S running on iOS 7.0.4. Is there any way to keep this from happening so that my playlist will start off where I last was?

    When I listen to music on my iPhone and pause it, if I come back to it later, the playlist has started over. I have a 4S running on iOS 7.0.4. Is there any way to keep this from happening so that my playlist will start off where I last was?

    Dear Jody..jone5
    Good for you that can't update your iphone because I did it and my iphone dosen't work for example I can't download any app like Wecaht or Twitter..
    Goodluck
    Atousa

  • HT202159 I was downloading a app from the app store and it downloaded about 85% then gave an error message download failed but when I reopen the app store to the purchases the resume button show but when i click it the same error comes up failed to downlo

    I was downloading a app from the app store and it downloaded about 85% then gave an error message download failed but when I reopen the app store to the purchases the resume button show but when i click it the same error comes up failed to download

    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Select
    /var/log ▹ install.log
    from the hierarchical list on the left. If you don't see that list, select
    View ▹ Show Log List
    from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
    If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

  • I bougth a macbook used from another person. I already set all accounts to my apple id, but only in APP STORE, when I try download the new version of a app, it request the old apple id from the another guy. I already terminate the session and init another

    I bougth a macbook from anotner person.
    I already change th apple id in all places.
    But only in app store when I choose download the new release of a app, it request the password of the old apple id, and i can't switch this apple id to my apple id.
    Where i should change for this?

    The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You — not the previous owner — must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
    1. You don't own another Mac.
    If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
    If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the previous owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
    To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
    If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
    2. You do own another Mac.
    If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can boot from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
    Once booted in Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
    After partitioning, quit Disk Utility and run the OS X Installer. You will need the Apple ID and password that you used to upgrade. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
    Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
    3. Other issues
    If you see a lock screen when trying to boot from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another authorized service provider to be unlocked. You may be asked for proof of ownership.
    If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
    If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to  authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
    When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information.

  • Every time I start Safari, uTube audio I was on last comes in loud and clear, but not the video. How can I stop this annoying overlap of sound? Thanks

    Everytime I start Safari, uTube audio I was on lat time comes in loud and clear, but not the video. How do I stop the annoying overlap of sound? Thanks.

    Try troubleshooting the Flash plug in...
    Troubleshoot Flash Player | Mac OS

  • The specific ringtone I assigned to a contact is not working. Only the default ringtone sounds off.

    I'm using an iPhone 5s. The app I'm using on my iPhone is simply titled Ringtones with an orange music note inside a grey circle. I have assigned certain app created ringtones to specific contacts. However when one of those contacts calls me ONLY the main / general / default ringtone sounds off. I know the tones work because if they are assigned as the default ringtone that specific tone plays. I have tried other ringtones that were included on the iPhone (NOT app created) and those work when assigned to contacts. So it seems it's only the app created ringtones are not working when assigned to specific contacts. So far I've tried to correct the problem by:
    1) Removing ringtones from phone and then downloading them again.
    2) I've tried rebooting or performing a soft reset (pressing and holding the home button &amp; power button until the apple logo appears).
    Anyone have any other suggestions?

    Hello Gemese,
    After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning audio issues:
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

Maybe you are looking for

  • HP Photosmart B110a wireless problems !!

    OK I've trawled every forum and wasted an awful lot of time courtesy of HP !! Have a MacBook Pro, iPhone4 & 3GS + iPad2 ; all connected via a Netgear 834bg, all software/firmware up to date. It has to be said I'm fairly Tech Savvy and can solve/hack

  • Can't open any files in Photoshop Elements 9 and 11

    I have Photoshop Elements 9 and 11, and right now I cannot open any files at all in either one. I keep getting this same error message every time: "Your request cannot be completed because the file format module cannot parse the file". Anybody have a

  • [SOLVED] Cannot get japanese fonts working in console

    First time with Arch. Did a clean install yesturday with Plasma as my choice of GUI. I have everything work, except for getting Japanese font support in consoles. First, fonts worked inside Dolphin, but looked terrible. So I added the infinality repo

  • Site files moved to new (identical) server; now iWeb gives "Publish Error"

    Our school district just replaced the web server where our teachers publish iWeb sites. All user accounts, passwords, IP addresses, and content moved over just fine, but now when teachers try to publish updates to their existing sites on the new serv

  • Where is the ConnectPool class?

    I am using WSAD 4.0.3 and wanted to use the Microsoft JDBC driver. But when I try to set the WS server up with connection pooling I am at a loss as to what the com.microsoft.ETC is to the ConnectionPool class. What is it called and where is it? Thank