I own Compaq Presario CQ62. Hang up while making video chat and watching videos in you tube

1.Compaq PresarioCQ62. 
2. Windows 7 32 bit. 
3. No error message. 
4. Re-installed OS before two days.
4. System hang up whenever making video call and watching online streaming videos. 

Hi,
Sorry, I'm talking about model, from there we may be able to find its specs. Please use the following example:
   http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&cc=us&docname=c00033108&dlc=en&product=1842189
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • Echo on my Win7 Compaq Presario CQ62-231NR

    I just bought a Compaq Presario CQ62-231NR Laptop running Windows 7.  The sound has a weird echo on it.  Does anybody know how to turn off that effect?
    Thanks in advance.
    Cheers,
    Burt
    Solved!
    Go to Solution.

    This uses the AC97 audio chip, apparently, (or compatible to) and uses the Realtek sound manager (usually soundman.exe) to configure it. You should be able to double click on the volume control icon in your taskbar (lower right hand corner, looks like a speaker) and go into the advanced options to play with that. Or just find the Realtek Sound Manager, either or.
    I am a Bestbuy employee who volunteers on these boards on my own time. I am not paid for posting here, and you should understand that my opinions are exactly that - opinions. I do not represent Bestbuy in any way.
    : Open Mailbox

  • Screen not working, Compaq Presario CQ62-215DX

    Hello,
    My Notebook screen is not working. My notebook boot up fine. the lights and the fan is working.  When I plug the external VGA to my lcd screen, it works fine. Only the notbook monitor is not working.
    which part in this case that needs to be changed?

    The display panel.
    http://www.ebay.com/itm/COMPAQ-PRESARIO-CQ62-215DX-LAPTOP-LCD-SCREEN-15-6-WXGA-/180579626928?pt=US_L...
    It is easier than you think to replace:
    http://www.youtube.com/watch?v=E0ggjZTRQhQ

  • Compaq Presario CQ62 laptop does not see SD card

    I have a Compaq Presario CQ62 laptop (Windows 7 64bit) that has a built in media card reader that has never worked.
    When I insert the SD card it makes the "USB Beep Up sound" that says it sees the card - but when I go to MY COMPUTER, there is no device listed for the SD card.  How do I read and write to an SD card with this laptop?

    I have done that.
    In DEVICE MANAGER I can see the SD Card show up under "Disk Drives" when the SD card is inserted, and disappear when it is removed.
    Under Storage>Disk Management the SD card shows up as drive 1 (main drive is drive 0) but no drive letter. 
    When I right-click on the SD card Drive 1 and try to change to a drive letter, I get an error message and it will not let me.  It will not let me format either. 
    The driver is from microsoft and is old - 6/21/2006. I did some google searching and read that a driver update would fix the issue. I uninstalled the card reader driver, got a new driver from HP and installed it, and when I inserted the SD card it loaded up the old driver...ugh.

  • I have a Compaq Presario CQ62-213AX but i can't get 5.1 surround over HDMI. How can i get this?

    My Compaq Presario CQ62-213AX should be able to output 5.1 surround over HDMI but in 'supported formats' only stereo is listed.
    This computer has a ATI Mobility Radeon™ HD 5430 and according to the specs,
    http://www.amd.com/us/products/notebook/graphics/a​ti-mobility-hd-5400/Pages/hd-5430-specs.aspx
    and here...
    "A special feature of the HD 5000 series is its ability to transmit HD audio formats (like Dolby True HD or DTS HD Master Audio) with up to 8 channels and 192 KHz / 24 Bit over HDMI 1.3a."
    http://www.notebookcheck.net/ATI-Mobility-Radeon-H​D-5430.23702.0.html
    it should work.
    My other HP laptop (DV7) is doing this fine so my system setup is OK.
    I have tried a full factory reset and have fully updated my system but it still doesn't work.
    Please tell me what i need to do to get it to work.
    Thanks,
    Tina.

    I can try-dunno how much help I'll be, though
    go here for Realtek drivers for surround sound
    http://www.realtek.com.tw/products/productsView.aspx?Langid=1&PFid=37&Level=5&Co nn=4&ProdID=144
    try this: go to Windows Sound, then playback devices, then click on speakers icon (should have realtek as default). Click on that, and click configure
    if realtek has a sound manager, try clicking on that, and a config dialog might appear
    sorry can't be much more help than that
    JB

  • Where to buy new screen? Compaq presario cq62-206SO

    Model Compaq presario cq62-206SO
    The best would be 100 usd or less for both shipping and the screen. I live in Norway.
    Note* I've looked on eBay but i can't find any screens there for my model
    This question was solved.
    View Solution.

    Try laptopscreen.com .  They ship world wide and the screens are usually less than $60.
    Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may click on the white star in the "Kudos" button for any helpful post to give that person a quick thanks. These feedback tools help keep our community active, so you receive better answers faster.

  • Can you overclock a compaq presario CQ62-219WM laptop?

    Is there a way to overclock my Compaq Presario CQ62-219WM? I really need a few more GHz...

    There is no way to overclock in hardware as with a desktop. There may be software overclocking options, visit www.overclock.net but any overclocking of a laptop is ill-advised and darn near impossible, anyway. The cooling system is built to work at stock speeds and canot be improved very much. If you want a faster computer, sell the one you have and buy a new one. If you want to try to game on the system you have it is a lost cause. The problem is not the CPU it is the GPU, which cannot be upgraded in any way as it is soldered to the motherboard.

  • HT201359 Why i can't find japan in the apple store while making apple id and using store country as a japan, i am unable to find it?? Help or send me link

    Why???Why i can't find japan in the apple store while making apple id and using store country as a japan, i am unable to find it?? Help or send me link

    You have already successfully made an Apple ID or you would not be able to post here in the ASC. You should not create another Apple ID, you should use the one that you have or you will create issues for yourself in the future.
    Open the iTunes app on your Mac. On the Home pane (little house) scroll to the bottom of the page and click on the flag in the lower right corner. Choose the Japanese flag.
    Then at the top of the page in the Quick Links on the right side choose Account. Do notcreate a new Apple ID fill in your current Apple ID and follow the on screen instructions.

  • Compaq Presario SR5722NL hangs

    Suddenly the computer started freezing in Windows. Only a reboot would mitigate this problem, but soon the PC would immediately freeze after or before logging in/loading Windows.
    So I thought the hard drive was failing, but now the computer even freezes in the BIOS.
    Is the motherboard defective? What would be a good replacement? I don't think HP will still offer support, right?

    Hello Nathan-NL,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand your computer is freezing even in the BIOS. I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at Notebook - HP ProBook, EliteBook, Compaq, Slate/Tablet PC, Armada, LTE.
    I hope this helps. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Error - Unhandled Exception While making AR invoice and AP invoice

    Hello Expert,
    while making AP Invoice from user's computer after entering 2/3 invoice   , SAP raises an error "
    and close SAP Business One but when user is connected through Terminal Server then there is no problem to add  document.
    while making AR Invoice from user's computer after entering 2/3 invoice   , SAP raises an error "
    and close SAP Business One but when user is connected through Terminal Server then there is no problem to add document.
    Please assist me regarding these issues.

    Dear Chintan,
    SAP Business One 9.1 (9.10.140) PL: 04  (32-bit)
    Regards,
    Mizan

  • My compaq presario desktop hangs after working for while.cpu fan also makes noise.?

    I did clean the dust but still fan makes noise and after starting the system it hangs.say may be after 10 min....what could be the problem ?

    The ST5402FH is circa 2008. Here's how to measure a fan. Although the example is for a 92mm, it's likely your CPU fan is 80mm. Use the guide to learn how to meaure the fan, so you can order it.
    The CPU fan is a 4 pin PWM fan. It's RPM is critical. Order too slow a fan, and your system will not boot. You can use the free HWMonitor to check the current RPM ranges. It will show 2 fans, just disconnect the rear case fan (3 pin) temporarily to determine which is the CPU fan.
    I am a volunteer. I am not an HP employee.
    To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
    The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
    (2) HP DV7t i7 3160QM 2.3Ghz 8GB
    HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
    Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Both Customs use Rosewill Blackhawk case.
    Printer -- HP OfficeJet Pro 8600 Plus

  • Compaq Presario CQ62 DVD not working after Windows 7 automatic install of upgrades

    The DVD in my Compaq CQ62 stopped working after Windows 7 automatically installed updates. The driver seems to be corrupted. When I open Device Manager, the DVD comes up as hp DVD RW AD-7701H SATA CdRom Device and the device status displays...A driver (service) for this device has been disabled.  An alternate driver may be providing this functionality. (Code 32).. There are two drivers installed--cdrom.sys from Microsoft,  File Version 6.1.7600.16385(win7_rtm.090713-1255) and PxHlpa64.sys File Version 2.03.32a from Sonic Solutions. If anyone knows the link to download the new driver or how to resolve this problem please let me know.

    We are not sure what might have caused this issue. You may try removing the affected filter drivers and check. This has helped few.
    To do this, follow these steps:
    1. Click Start , type regedit in the Start Search box, and then click regedit in the Programs list.
    If you are prompted for an administrator password or confirmation, type your password, or click Continue.
    2. Locate, and then click the following registry subkey:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
    Caution There can be many instances of the registry subkey that is mentioned in step 2. You must make sure that you are in the appropriate registry subkey before modifying the UpperFilters and the LowerFilters values. To verify that you are in the appropriate registry subkey, make sure that the Default data value is DVD/CD-ROM and the Class data value is CDROM.
    3. In the right pane, right-click UpperFilters, and then click Delete.
    4. Click Yes to confirm the removal of the UpperFilters registry entry.
    5. In the right pane, right-click LowerFilters, and then click Delete.
    6. Click Yes to confirm the removal of the LowerFilters registry entry.
    7. Exit Registry Editor, and then restart the computer.
    Note After you remove the UpperFilters registry entry and the LowerFilters registry entry, you may lose functionality in certain programs such as CD recording programs. In this scenario, you must reinstall any affected programs.
    See which Windows updates are installed
    http://windows.microsoft.com/en-US/windows7/See-which-Windows-updates-are-installed

  • Compaq Presario CQ62 Fan runs constantly, at max speed during X11

    I have tried to follow the instructions in the wiki for fancontrol, but lm_sensors doesn't seem to even recongnize the fan.
    "sensors" output:http://hastebin.com/gorofawogi.hs
    Also, the temperture sensor reading seems to be erroneous, as my laptop is running nothing close to 88°C .
    Is there a fix to this? Or does my laptop just not support fancontrol?
    Interestingly enough, this issue occured after I cleaned my fan out. Could this be related somehow?

    I looked deeper into the wiki, and it seems that cpufreq and lm_tools have not been tested on my model of Compaq. The notion that it does not support fancontrol seems to be ever-looming.

  • How to get to the fan of Compaq Presario CQ62?

    I believe there is an issue with the fan of my laptop, and I opened up the back of it in hopes that I could get to the fan and take a peek to see if it was merely a cleaning issue.  I failed to find a way to actually get to the fan.  I removed all visible screws and still couldn't manage to figure out how to get to the fan.  Can anyone offer assistance or point me in the right direction of how to figure this out?  Thanks.

    You unscrew all the screws including the one under the battery.  Make sure you remove all RAM and Hard Drives.  Carefully pry up the key board (if you did miss some screws underneath the keyboard will not come up), DO NOT pry from the bottem or else you can break some of the keyboard wires.  There is one screw under the keyboard, take it out.  There are some wires under the keyboard that you can see pluged into the main circut board remove them all carefully ( the ribbions will come out by lifting the top where the ribbon is connected, and do not forget the one on the top left hand side (careful not to break the wires).   Now from unerneath remove all the doors and unplug the wireless card,  its about 1 1/2 by 1 inches.  Now carfully pry the shell aprt while its right side up ( the mother board is screwed into the bottem half of the shell).  The mother board has two screws holding it down take them out and unplug the wires on the right side and one on the bottem. Now lift the mother board on the right side and carfully slide it out, it may be slightly binded aroung the fan.  The fan is on the bottem of the mother board.  If you want to remove the fan you have to remove the heat sink so you need extra heat sink.
    I hear HP laptops have a lot of fan issues,  I had a HP pavillion 6000 that had fan problems, and now this one.  I sent it off to get the CPU fixed and came back like this.  I do not trust HP to fix my computers any more and do all maintanance my self. 

  • How do I get all the files from the hard drive in non-working Compaq Presario CQ62-411NR

    Spilled iced tea into the keyboard of notebook and after drying out it will not power on. If I try a hard restart it is indicated that i would lose all the info in the memory and I can not afford to lose the photos of my mother that are on the hard drive. Is there a way of getting the hard drive to work in some other fashion so that I can get my photos and other files.
    This question was solved.
    View Solution.

    Very happy to help.Valued family photos are a treasure.
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

Maybe you are looking for

  • Info Space creation error on top of .unx

    Hi All, Version of SAP BO Explorer installed in our machine is 4.0 SP2. BI Platform version is 4.0 SP5. Issue 1: While trying to create Information Space out of .unx, getting the below error: Failed to retrieve the data source details. The creation o

  • Authorization objects in PM notification

    Hello all, I would like to check if there is any possiblity to prohibit changing the line items of activities in PM notification thru security with authorization objects. I did checked with standard default objects and does not see anything related t

  • Db table for Status of Serial Number

    Hi, In IQ09 we will give Status Included and Status Excluded . In what table that status is storing ? that status belongs to serial number. like ELOK - Locked ESTO - In the warehouse. when you press F4 in STATUS INCLUDE selection field in the IQ09 T.

  • CSCue79218 - Add support for multiple managers for EIM/WIM users

    Hi Cisco BU, Which release of Cisco EIM/WIM will this feature be introduced in? Thanks, Yav

  • MRP Total Planning in Back Ground job(RMMRP000)  Doesn't work

    Hi Gurus I set a background job for Running MRP (RMMRP000) but it doesn't work but when I run MRP for products one by one,it works. Does any one know about Why it operates such a way and if it need Specific Setting in Customization. Thanks Babak Bolo