I plugged in my iphone to restore it but while restoring itunes shutdown itself . if my iphone is not connected to the mac itune works but when i connect my iphone to my mac itunes does not open at all.
i plugged in my iphone to restore it but while restoring itunes shutdown itself . if my iphone is not connected to the mac itune works but when i connect my iphone to my mac itunes does not open at all.
Hi Arjun sache,
Welcome to Apple Support Communities.
It sounds like you're seeing an issue with iTunes shutting down unexpectedly when your iPhone is connected to the Mac. Take a look at the article below, it provides a lot of great troubleshooting tips that may be able to resolve the issue for you.
iTunes: May become unresponsive when connecting iPhone, iPad, or iPod touch
http://support.apple.com/kb/ts3219
I hope this helps.
-Jason
Similar Messages
-
Verizon signal is strong but get error message "Ipad is not connected to the Internet" When I try to use Safari.
Wireless works but my Verizon account does notSome things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
Please help!! Going crazy. My iPad will not work connected to the wifi. I have an iPhone 4S and its working fine. Any suggestions??
If those things don't work I'd take it into the apple store and have them look at it. I've not heard of wifi antennas 'breaking' but that sure sounds like it.
I had my laptop repaired once and then the wifi stopped connecting unless I was in the same room as the router. Turns out the tech hadn't reattached the antennas. Thing is, I doubt you were in the 'guts' of your iPad so they had to have gone non-functional on their own. And beyond a normal person's ability to fix. -
not familiar with macs. whenever the airport express is connected to my router, it messes up connectivity for my PC.. bought this to be able to print to a canon pixma mp6120. will it work for that?
How is the express connected to your router? It does have to be connected if you intend to print through it.
The best method of connection is ethernet to WAN port of the express.. assuming a new one. The worst method is wireless. When you do wireless connection it can mess up other computers. So my recommend is to test with ethernet even if the printer is not nearby and see if the problem goes away.
The Express has to be bridged.. and has to be setup to create a wireless network in this setup..
Post screenshots from the airport utility if you cannot get it to work.
The express will enable you to print over the network to a printer plugged in by USB.. mostly!! It is far from foolproof.. it is also limited in lots of ways.. ie print only in one direction.. no info from the printer will get back to the computer. It is a poor way to do things..
You should return the express and buy a wireless printer.. that is far better solution to your problem. Printers remember are cheap.. it is the ink or toner that costs heaps. -
Wiped our old iPad 1 clean, now can't install iOS from iTunes using laptop PC (W Vista). iTunes does not "see" the device. Tried uninstalling and installing iTunes on laptop. Also bought new USB cable. The iPad is charging, but that's all it does. Just want to get it operating again for browsing and e-reading.
OK. You merely erased the content and settings. The IOS is still there.
If it has NEVER been jailbroke, here are some standard repair procedures. From what you've already stated, my guess is that you'll end up with Recovery Mode described in the last paragraph.
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, read this. -
I have a 16GB iPhone 3GS. Tried synching my phone through iTunes (11.0.1 I think... on a 2009 Macbook Pro). Now when I connect to iTunes, it says it does not recognise the content on my phone. Is this because my phone (and laptop) are too old?
Also, when I tried to Restore the settings, an Error Message pops up that says " The iPhone software update server could not be contacted. The requested resource was not found.
I'm trying to free up space on my phone by removing [literally] thousands of old photos which were originally synched to the phone, because I had forgotten to uncheck the photos button when I synched it ages ago.
I have also tried synching it on my 24" iMac (running OSX Snow Leopard). But again, when I try restoring the phone through itunes, it says the file is corrupted. It sggests unplugging the device, and then plugging it in again. I have done this numerous times with no success.
I'm guessing it must be because my phone (and versions of iTunes, and OSX) are all too old.
Please can anybody help.
Cheers,
Dan_nz.There are multiple reasons that lead to issue. You should read the troubleshooting guide to get the right solution to solve the issue: iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support
-
iPad Mini 2 goes ballistic when being charged -- in other words, it hangs abruptly ; does not type properly. Moreover, in some instances open apps peculiarly force quit without the screen being touched whatsoever.
Hi, RomeroSalsa.
Thank you for visiting Apple Support Communities.
I understand that you are experiencing an issue with the responsiveness of your iPad mini while charging. I would need a little more information on how you are charging the device to provide a better answer. While the steps below are not exactly labeled for this issue, they may help resolve the issue.
If the battery doesn’t charge
If the battery doesn’t charge, unplug your device and try these steps:
Look at the connector at the bottom of your device and make sure it’s free of debris.
If you're using a USB power adapter, make sure it's plugged in all the way and the power outlet is working. If you're connecting to a computer, make sure it's on and can charge your device. To charge an iPad, you might need to use a USB power adapter and plug into a power outlet.
Try a different USB cable, USB power adapter, or USB port.
If everything seems to be working, reconnect your device and wait for 30 minutes.
If your device still doesn’t charge, try to restart it while it's connected to power. If you can't restart, reset your device.
If you can’t charge your iPhone, iPad, or iPod touch
-Jason H. -
When I click on a picture, Photoshop Elements 12 does not automatically open.
When I click on a picture, Photoshop Elements 12 does not automatically open (as it did when I used previous versions Photoshop Elements 4 and 9). I can't even right-click (Windows) on the picture and choose Open With and specifiy Photoshop Elements 12. I have called Adobe several times (Case No. 185140584) and they keep saying it has been sent up to senior management and they will call me back with a solution - but to no avail! No return calls and I still can't really use the Product I paid for and downloaded. The only way I can open up a picture to edit it is to open Photoshop Elements 12 and then then click "Open" and then search for the picture on my hard drive (which takes a lot more time! I did not experience this difficulty at all with versions 4 or 9!
Hi,
You failed to say which Windows system you have - I can get the "Open With" to work on my Windows 7 64bit system.
When you try to set up the "Open With", are you setting the correct target program?
It's the green one (not the red one) in the above image.
Once you have selected that program, make sure you set it as default so that a double click will open the photo in the editor.
Good luck
Brian -
does any one know how to connect itunes up? when i click on store it always says 'itunes could not connect to the store. Make sure your network connection is active and try again.' if you know how to fix tell me please, please! thanx
Work through all the troubleshooting here: iTunes: Advanced iTunes Store troubleshooting
B-rock -
Currently when I double click it creates cpgz file and does not open. The only way to open pages doc is to manually ask to open with pages.
Hi Karen,
Sounds like OS X has lost the association between Pages and its files.
Start by quitting Pages, then going to Finder.
In Finder, locate a .pages file. Click on it (once), then press command-I (eye, not one) to Get Info.
In the Info window that opens, expand the Open With section.
In this section, click on the pop-up menu and choose Pages (even if Pages is already shown).
Click the Change All button to associate all files with the .pages extension with Pages.
Close the info window.
Double click any .pages file to check that Pages will now launch and open the file.
Regards,
Barry -
I'm trying to purchase printable ITunes cards -- which I've done in the past...no problem. Now a message reads: this Apple ID does not support this purchase....or something to that effect. What do I do?
First of all, I think you are confused by something.
You don't print cards. You print Certificates. So which item are we dealing with here first of all?
Also, you can't buy gifts with just Store Credit, so do you have a linked CC? -
Safari always warned me when I had multiple tabs open before it would close. Now it closes whenever I hit the red X (close out). When I was at the Apple store ithey indicated that that is how the latest Safari works, but it is supposed to open all the tabs that were open when it is relaunched. Mine appeared to do that when I was at the Apple store, but now it does not. When it opens now, it just opens my home screen with no tabs.
Can anyone shed light on this?One change in Firefox 4 is to by default stop Firefox displaying the warning message, but it can be turned back on by changing some preferences.
# Type '''about:config''' into the location bar and press enter
# Accept the warning message that appears, you will be taken to a list of preferences
# Locate the preference '''browser.tabs.warnOnClose''', if its value is set to '''false''', double-click on it to change its value to '''true'''
# Repeat this for these 3 preferences '''browser.warnOnQuit''', '''browser.warnOnRestart''' and '''browser.showQuitWarning''' -
I have a mac but am experiencing the same prompt? "iTunes could not contact the iPod software update server because you are not connected to the Internet. Make sure your Internet connection is active and try again."
Hey ksgrech,
I found the following information which may be of assistance in troubleshooting this error on a Mac:
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
Furthermore, you may want to refer to this article (error 3194):
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
Cheers!,
Matt M. -
just bought a new I-Mac. At start up several updates were needed. The I-movie one stopped and shows an ERROR HAS Occurred. Howevr it does not allow me to update it again. In my purchases it shows as Installed with Error. What should I do?
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select "/var/log/install.log" from the file list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting. -
My aux input does not work. When i put in my headphones my mac does not respond, and my speakers just continues as normal. What to do?
I had the same issue. Initially i thought i need to take it to apple for replacing the aux port. But luckily I was able to fix it by resetting the PRAM . To reset the PRAM
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Immediately press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.Continue holding the keys down until the computer restarts, and you hear the startup sound for the second time.
Release the keys.
Resetting PRAM may change some system settings and preferences. Use System Preferences to restore your settings.
You can try this before you take to apple store. It may work if you are lucky. Good luck
Maybe you are looking for
-
Single Report for production scrap and Movement type 551 scrap
Hi All, Can we include the scrap information from production and scrap from movement type 551 into a single BW report?.......My assumption is we cannot include it into a single report coz production scrap will have a different material information an
-
Itunes wont Open with Vista Service pack 2
My itunes stopped working a while ago and so i decided to delete it, i then reformatted my laptop and reinstalled vista back to the way it was when i first got my laptop and by wonders itunes worked. However since i have completed the updates that wi
-
Exit or badi for tcode F110, which called during the payment run.
Hi All, We have a requirement to create a txt file in the application folder, while doing the payment run. right we are copying the standard program RFFOEDI1, but we dont know in which part of code , we can find the values from REGUP and REGUH tables
-
Repairing database does not find missing folders stored in Library
Has anyone successfully found a way to manipulate the iPhoto database to restore images that are missing from the iPhoto app but still stored in the iPhoto Library package? The corruption to some folders from 2007 must have happened a while ago. My b
-
Changing BI Job Priority in ECC
Hi All, I have a requirement to change the priority of BI jobs running in ECC (i.e. Infopackage job running in ECC.. have to make it B from default priority C ). I have gone through other threads but couldn't find any solution on that. Please let me