I recently lost iphone4s and it was in the cloud had pics on it and was not found i have a new device and cant seem to get those photos to this new device
I cant seem to the get the previous pictures off of the other device, shouldn't they be able to transfer throught the cloud
If you had Photo Stream enabled on the 4S that was lost, turning on Photo Stream with your iCloud account settings on your new iOS device should download all photos currently available in your iCloud Photo Stream.
Similar Messages
-
itunes wont open at all, error message : quicktime was not found .... please reinstall ... i did that but no luck this only seems to have happened since the 10.4 update, im on windows 7 ..
Can you start QuickTime on your computer?
You'll probably have to search for the Windows Installer Cleanup Utility and use it to remove QuickTime Player and iTunes. Then download and install the iTunes again. -
how do i reset my mac completely? I have parental controls and cant seem to get to time machine cause i bought the computer with parental controls on it and they did not have the password. How do i completely reset my macbook pro?
If you have a rescue email address (which is not the same thing as an alternate email address) on your account then the steps on this page will give you a reset link on your account : http://support.apple.com/kb/HT6170
If you don't have a rescue email address (you won't be able to add one until you can answer your questions) then you will need to contact Support in your country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps on this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5620
Or, if it's available in your country, you could change to 2-step verification : http://support.apple.com/kb/HT5570 -
I cannot seem to get the Apple Lakeside store to send me an email of my recent purchase (iPad2)(26 April 2011.
Have spoken to one of the managers by phone and have spoken to Applecare. When ringing the store seems that nobody answers the phone on extension 5, but is quickly answered on the business extension. Seems a bit of a shame, being an Apple fan that the shop is quickly turning into just another electrical superstore. Anybody got a clue as to how I can get an emailed Receipt for £514.00.The online Applestore sorted it out.
-
I need help to locate my pictures in the cloud
When my son updated my phone early this year it wiped out all my pictues on my I-phone 4S
How do I access the cloud to view my pictures??Do you have Photo Stream enabled with your iCloud account on your computer?
iCloud is temporary storage - limited to 1,000 photos and 30 days for each photo.
Photos/videos in your iPhone's Camera Roll can and should be imported by your computer as with any other digital camera especially before installing an iOS update. -
HT204053 i have a ipod that i cant seem to get new songs down louded from my mac
I have a ipod that i cant get new music from my mac on Itunes to down loud on it. Can anyone explain what i need to do?
Hi simekdebbie,
What is happening when you try? Are you trying to sync? Do you have Automatic Downloads for Music turned on under Settings>iTunes & App Store on your device?
We need a little more info on what you are trying to do and what is happening.
Cheers,
GB -
So i have a mac book air. And i am trying to type a paper but none of the tools are on m document for easy access. I have to go in and try to change everything under the settings manual. I was wondering how i put all of the easy acces tools such as font spacing and styles all on the front part of my screen not up at the top menu area. I just want it where its suppossed to be not hidden. How do i do that? Thanks.
Thank you so much
Kiss Kiss Kiss Kiss
Life saver
Best wishes and Many thanks
Samantha -
I have an old iPod that has all of my music and use my personal computer to keep iTunes on and store all of my music. Recently my old computer died and had to get a new computer. I got my iTunes restores on my new computer and see all of my music, but when I tried to sync up my old iPod (love it!), I ended up erasing all of my playlist. In my "manage my device" I see my iPhone, my iPad, but I do not see my iPod. How can I add my iPod to "my manage my Devices" and get it synced up? Any help would be greatly appreciated.
BTW - Somehow I was able to restore my iPod back to Factory Settings.There are lots of ideas floating on the web for this particular issue - all of which I tried. I had the same problem and it turned out to be my USB cable. I thought the cable was fine as it would charge my phone and play but the data transfer pin was bent. I replaced the cable and it fixed the problem. Worth a shot as it is an easy fix!
-
I am trying to get photos from a friends i pad to mine so that I can make a slide show for him. I tried using my i pad camera connection kit with a SDHC card in it and followed the instructions in the manual. I got to the part where it had me select COPY from the drop down menu. When I did that nothing happened. Can this be done at all?
only option is to download an app for bluetooth transfer which may be quite slow, checkout 'Bump' or search for photo transfer or similar.
-
my i phone pass code is locked and i cannot get it to come back on. thanks for any help
You can restore the iPhone from backup on the last computer your iPhone synced with, this will allow you to reset the passcode http://support.apple.com/kb/HT1414. If you do not have access to the last computer the phone synced with, you will have to force the phone into recovery mode & restore as a new device, all data on the phone will be erased http://support.apple.com/kb/HT1808.
-
Im trying to input a DC voltate on channel 1. So i hook up +5 to the channel 1 analog input, and hook up ground to the AIGND. When i measure it in continous time, i get a reading of -1.3 V, when i move the cable connecting the NI board and the DAQ, the voltage jumps around. I even tried connecting AIGND straight to channel 1 analog input, and read a voltage of 2.3, but its not stable, it jumps around a lot. What is this problem. please help
This is going to depend on how you have your DAQ board configured. In differential mode, the positive input is channel 0, but the negative input is channel 8 (for 8 differential/16 single ended MIO boards. Channel 32 is - on 32 differential/64 single ended MIO boards). (Similarly, chan 1 (+) and chan 9 (-) are the next channels, etc).
For single ended mode, chan 0 is the +, and AIGND is the -.
I suspect you have your board in differential mode, and your - is not connected to the correct pin; therefore, your voltage is floating.
Mark -
I am having a problem updating itunes to the latest version on my windows xp i get the error message 126 and the banner that says this application has failed because MSVCR80.dll was not found. anyone have a fix suggestion? thanks
Click here and follow the instructions.
(98724) -
The Network Path was not Found - Server 2008
I am managing a Windows Server 2008. When I go into the Group Policy Management Council and attempt to edit, or add group policy it comes up with an error "Failed to open Group Policy [...] The Network Path was not found." I am new to using Windows Servers and quite confused as to the problem.
Hi,
This problem may be related to network access. I list some common factors and corresponding troubleshooting steps as below. Please check them one by one and let me know the result.
1> DNS issue
From the problematic PC, please run the following commands and then check if the issue still exists:
1) Can you ping FQDN of the DCs in your networks?
2) Can you ping IP of all the DCs in your networks?
3) Does the DNS configuration point to the correct DNS server?
2.
1). Start -> run -> cmd
2) Type nslookup, and then press Enter; Type set type=all, and then press Enter.
3) Type _ldap._tcp.dc._msdcs.<yourdomainname>, and then press Enter to check the result.
If SRV records could not be resolved successfully, please type 'net stop netlogon' and 'net start netlogon' to regenerate SRV records.
2>. Permission
Ensure you logon DC using the user with domain administrator privilege. If so, please check if you have the proper permission on sysvol files under %systemroot% and inf file under %system root%
3>. PDC is not available.
By default, Group policy object editor connects PDC role to enumerate GP settings. Please
refer to the following article to confirm which DC is PDC role:
How to view and transfer FSMO roles in Windows Server 2003
http://support.microsoft.com/kb/324801
How to view and transfer FSMO roles in the graphical user interface
http://support.microsoft.com/kb/255690
After locating the PDC role, please logon it and see if sysvol file under %systemroot%\SYSVOL\ has been properly shared and has the correct structure.
If not, you can refer to the following KB to rebuilt Sysvol tree.
How to rebuild the SYSVOL tree and its content in a domain
http://support.microsoft.com/kb/315457/
4> We can control which DC is preferable DC that Group policy object editor connects by default via GP, which is User configuration\ administrative template\system\group policy\domain controller selection. Also, please enable it as 'Use any available Domain controller' and run 'gpupdate \force' to test the result.
If this issue still continue, please post back. -
Error : Hierarchy version was not found.
Hi all,
I am finding the following warning message, basially it is a business content report and I loaded data to concern cube and while generating a query I'm finiding the following message:
"Hierarchy PROJECT HIERARCHY in version was not found for key date 200504"
Can any one advice me how to over come this.
Thanks in advance.
Regards.Bhanu Gupta,
Hi.
Let me give you lil background abt our working scenario.
Currently we are working in BW 3.3 integrated with xRPM 2.0.
During extraction, I successfully replicated the data source 0RPM_PROJECT_HIERARCHY and I am able to see the same , in list of data sources(When I go to RSA1 >> Source Systems >> SELECTING OUR SC >> CONTEXT MENU >> DATA SOURCE OVERVIEW).
Now my problem is I'm confused to map this a particular data source, which need to load data in above context.
Can you plz tell me where can I find to which info source that I can assign this particular data source 0RPM_PROJECT_HIERARCHY.
I mean is there any mechanism or way to find??
Looking forward for your response.
Regards. -
the windows computer that i had been syncing my ipod to died and was unfixable. i now have a new windows computer. how can i back up my ipod on to my new computer without losing all my music and apps?
See these 2 User Tips...
Syncing to a New Computer...
https://discussions.apple.com/docs/DOC-3141
Recovering your iTunes library from your iPod or iOS device
https://discussions.apple.com/docs/DOC-3991
Maybe you are looking for
-
I am confused about something. How do I read a book on my MacBook Pro? I can't find the iBook app anywhere, which is what I use on my iPad. The book I want to read is in my iTunes but I can't click on it. Some of my iBooks show up in my iTunes bu
-
Is there any user control on the iphone anymore?
Ok so I hate the new OS 7 but before you write me off as just complaining please read further: I have a very hard time reading the phone because of the white backgrounds on everything , I understand some like this. Is there any way to change this? I
-
Created files in trail version now having issues using file in CS3
Hi Everyone, Hopefully someone can answer my question. I don't have much experience with Dreamweaver, so any help would be greatly appreciated. I downloaded the free trail version of Dreamweaver CS5.5 and starting creating a new site with it. My
-
So I use ARD on a daily basis at work to manage over 300-400 users, and before this update everything was working fine. The major issues that the 3.7 update seem to have caused are the following: Eats up huge amount of RAM which cause the whole machi
-
PE 9 crashed. I tried to uninstall program and reinstall it. I keep getting error message "setup has detected that Adobe PE9 is currently in use. Please close all running exe." I can't close the damaged program. Help