I recently updated to iOS8.1on my iPad 1and it ran very slow. Just a few minutes ago, it shut down compoeteoy and I cannot get ANY response at all. Just a black screen. Any help pkease?
Can anyone tell me how to restart my iPad that just shut down, while I was reading a book on Overdrive? I still had plenty of battery life. I tried to reboot holding down the off button, but no response at all.
Photos that are in the cloud stay there until they are removed by a device that has the right privileges. If your iPad is logged in with the same AppleID, then doesn't it show the photos from iCloud?
You will only be on iCloud Drive if you expressly chose to upgrade.
Similar Messages
-
I performed a software update and the system is installing an update but it has been running for over 24hrs and keeps saying "This may take a few minutes, don't shut down your computer" Can anyone help?
Hello cor-el, thanks for your reply. I changed my settings for downloads to desktop and it has appeared on there. When I double click I am asked which program I want to open file. I click firefox and another box "opening install" says I have chosen to open the file which is an application and do I want to save it. This is the only real option so I press save file. I get a box saying this is an executable file which may contain viruses - do you want to run. I press ok and the final box showing C drive file name and desktop appears stating application not found.
This happens the same whenever I try to install.
To my untrained eye the application is not being recognised as an application and I cannot work out how to get it to do that.
My plugin is still showing as out of date.
Is there anything you could suggest. Thanks for your time. -
Updated 3.0.0.102 just a few minutes ago.
And I noticed the watch face is now 12 hours and not 24 hours anymore.
Thanks Sony.
Now to explore the other new features such as the now selectable watch cardsalexdon wrote:
@Xperyan even before the update, the band would vibrate when battery was low. But the new features are nice. Not sure why here they say that it should vibrate on disconnect as it is not available:
https://talk.sonymobile.com/t5/SmartBand-Talk/vibration-to-disconnect/m-p/948063#U948063
LOL. in that case it is a update/upgrade feature for my smartband.
It have never done the vibration before. Band died on me a few times when I didn't pay attention to the battery level.
Good job Sony..now I will await for a smartband talk with color e-paper jusk like the new Pebble Time -
how to trobleshoot an ipod touch. yesterday i tried to reset the setting then after i click reset it suddenly shut and after a few minutes an apple logo came out. It cannot be open anymore until now and the logo is still their. what will i do.please help me thank u
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
ipad 3 64 GB wifi and cellular though no sim at present.:
A week ago I began the process of downloading iOS 8.1 and the ipad is now unusable for 'veryfying update' is still on the screen. I cannot power off or do anything except watch the message. Help would be so appreciated. Thank you.Try a reset by holding the power and home keys down until the Apple logo appears.
Barry -
I have noticed that my iMac 0SX is VERY SLOW. I would like to clean it up. I have been receiving pop-ups from TUNEUP MY MAC. They want $40 to supposedly clean up my computer and make it run smoother and quicker. Any reviews? Any suggestions?
DO NOT repeat DO NOT download or install any performance applicaiton's of any type. This is a scam and should be avoided. You haven't told us anything about your computer such as the version of OS X installed or how it's configured. I would recommend downloading and running an EtreCheck report so we can get a better idea about your system. You can find Etrecheck by clicking:
http://www.etresoft.com/etrecheck
Run it's report then post it back to this forum. -
How can I recover today's photos? I was editing them about 91...i photo had already put photos in catergories..when suddenly..i photo just SHUT DOWN!
When I tried to reopen i photo..they had all disappeared. please help me!There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have. -
I need help with troubleshooting for flashing "special characters" screen on my MacBook with Snow Leopard. The screen flashes regardless of what app is on; it is as if it is trying to load but it does not. Is there a duplicate or conflicting file in the system that should be deleted? Where would it be?
Thanks in advance for your attention.
Consuelo CorretjerUmmm, nope. All due respects, this problem cropped up suddenly, at about the same time, for multiple users, on different laptop types. Probability of all this happening at once due to simultaneous hardware failures is much lower than if it was caused by say a software update not playing well with something (a piece of 3rd party software, etc). I'm having the same exact problem, I have put a new battery in, same thing happens.
This is similar to 3 or so years ago when widgets were first introduced, laptop battey lifes dropped to about 1/3 and the machines heated up. General consensus was it must be hardware, well no it was software, and a software fix took care of it. I'm hoping someone figures this out soon...
Thanks -
I was updating my iPad air and in the middle of update it suddently cannot reconnect to my computer and it has the iTunes logo with a plug picture on a black screen, PLEASE HELP!!!! I did try steps from http://support.apple.com/kb/HT1808?viewlocale=en_US - IT DOES'N WORK!
Yes, that is your only option.Yes. You have to restore.
Try the following if you have difficulty restoring.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Just upgraded my iPad to IOS5 and when the download was completed, a window said that there was an error and it could not restore. Now I have a black screen with the Apple logo and the circle lines. None of the buttons respond. Help, please!!
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. Maybe this will let the iPad reboot and then you may need to restore again but see if this helps to start the iPad first.
-
Hello,
I recently tried downloading the IOS8 to my iPod 5th generation and when it was almost done the computer said there was an error. Right after that, the iPod shut down completely and now it's on recovery mode. I plugged it in and it said that I had to restore it and update it so I could use it again but it doesn't let me. What can I do? I even did a backup before the update.
I really need help.What happens when you connect to computer and restore via iTunes?
Without knowing that:
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I just bought a new iMac, plugged it in and nothing, black screen any suggestions and the apple support function is no help, real glad I bought the apple care plan and you can only use that if your machine turns on!
If you bought the computer at an Apple Store return it. Let them know you aren't happy about your start in the Mac world. If you bought the computer online and have an Apple Store nearby you can take it there even though you didn't buy it there. Note: if going to an Apple store go online and make an appt with the Genius. Stores tend to be busy so this will give you a time to know you can walk in and pretty quickly get attention. Just walking in with a dead computer you may have to wait a while.
No Apple store nearby? No problem, call AppleCare and they'll take care of you. Ask for expedited return & shipment and again, let the technician know you are new to the Apple world and not happy. The last time I brought home a dead computer I not only got a replacement right away but I got an Apple gift card for my inconvenience. -
My TV show purchases don't play correctly. When I click on them, a black screen with no audio plays. The timecode for the show runs, but I don't see or hear anything besides that black screen. Help!
Have you tried resetting the iPad:
Reset iPad: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears. -
I recently updated the iOS on my ipad 3 and lost all my files in the process. How do I recover my lost files which were not previously backed up?
If you don't have them backed up somewhere, then there's little possibility of recovering them. There are some utilities that can in some cases recover an inadvertently-deleted photo, but I've found none that can recover photos or other data from an iPad that was erased as part of an iOS upgrade. You can do a web search for something like "iPhone photo recovery" and you'll find some utilities you can try.
Regards. -
To open “Java Preferences,” you need to install a Java runtime, but you are not connected to the Internet. I have tried links that people have put on other discussions but all i get is a black screen please help!!
Try this link, warning, it's straight to download mode:
http://support.apple.com/downloads/DL1421/en_US/JavaForMacOSX10.7.dmg
Maybe you are looking for
-
Is it possible to run sub vi and main vi at same time from startup?
Is it possible to run both my main vi and my two sub vi`s from startup, all of them continuously? I have to sub vi`s that are supposed to take in measurements from two different instruments continuously. I manage to make a program where I can open up
-
Flex Guru's - Answer this if you can
I am having a strange problem. We have a Struts based application. All our JSP pages are within the WEB-INF folder. When I use Flex tags to even print a label, the compilation takes place, but then during execution page comes up blank with a backgrou
-
everything was successful in pi and when i checked in sxmb_moni in r/3 it has shown a error as below. PI is calling a inbound proxy in this proxy it is calling the bapi function module. I HAD CHECKED IN PI Mapping the field gl_account is string and w
-
Orcle inventory-is it integrated and does it capture best busness practics
Hello all, I have a basic but imp qn , for which I have tried to find a comprehensive answer but in vain I would like to know what features in oracle apps make you say that it is integrated and captures best business practices.. provide your views or
-
Limiting Body size post list in SharePoint 2013 blog site
Hi, I want to fix the length of the body content in the post list in blog site in SharePoint 2013. And also i want to set the limit to show number of blog in the home page. Please help. Thank you!