I reinstalled iPhoto 9.1 and now I can't drag and drop photos to the desktop.  The photos have a grayed out flag in the upper left corner and a pull down menu in the bottom right. Please help.

I reinstalled iPhoto 9.1 and now I can't drag and drop photos to the desktop. The photos have a grayed out flag in the upper left corner and a pull down menu in the bottom right. Please help.

Do you get any error messages?
Regards
TD

Similar Messages

  • My big old IPod is stuff with an error stating Disk mode at top with a big check  mark in middle of screen and an OK to disconnect at the bottom. Please help I have a lot of reggae music I can't lose.

    My big old IPod is stuff with an error stating Disk mode at top with a big check  mark in middle of screen and an OK to disconnect at the bottom. Please help I have a lot of reggae music I can't lose.

    Ok so I've done what you said and this is what it's come back ....
    I don't know that these are the errors , but they're the things which don't look right ...
    Throughout the shut down there is a recurring line ;
    It says ;
    Com.apple.launchd 1 0x100600e70.anonymous.unmount 301 PID still valid
    Then there are 2 more which I think are related ;
    Com.apple.securityd 29 PID job has I overstayed its welcome , forcing removal.
    Then the same with fseventd 48 and diskarbitrationd 13
    Oh and on Launchd1 : System : stray anonymous job at shut down : PID 301 PPID13 PGID 13 unmount...
    Then the last process says "about to call: reboot (RB_AUTOBOOT).
    Continuing...
    And stops ...
    Hope this means something to you ... Thanks again for your help so far :-)

  • On an iMac I can't enter any text in safari or Firefox header bar. In all my program's I just have the arrow cursor and can't change to any tools in the tool bars - please help!

    I cant type any text in safari or and in all programs i have the arrow cursor and can't change to any tools in the tool bars - please help!

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • HT201263 My daughter installed a password to unlock her iPad which she forgot and now her iPad is disabled and cannot be used. I can't even connect to iTunes thru the computer.  Please help.

    My 9 yr. old daughter installed a password to unlock and lock her iPad which she forgot and now her iPad is disabled.  We can't even connect to iTunes thru the computer.  Please help.

    Forgot or Wrong Passcode
    http://support.apple.com/kb/HT1212
    Forgot Passcode use recovery mode to restore
    http://support.apple.com/kb/HT1808

  • Trying to create a drop down menu in numbers...please help

    Hi
    Can anyone indicate how to go about creating a drop-down menu.
    Thanks in advance

    Hi Meela,
    Welcome to Apple Discussions and the Numbers 08 forum.
    Check page 66 of the Numbers User Guide supplied with your copy of iWork. The guide refers to them as "pop-up" menus, so a search using "pop-up" will be more successful than one using "drop down".
    Essentially the process is:
    Click on the cell to select it.
    Open the Inspector and choose Cell Format (icon is a cell containing 42)
    Click the Cell Format menu and select Pop-up Menu from the bottom of the list.
    Double click an item in the list to edit it. Click the + button to add an item, the - button to delete the selected item.
    Done.
    Regards,
    Barry

  • Java Script Drop Down menu is not working someone please helP!!!!!

    Okay will I had a domain hostlyon.com which was changed to
    hostlion.net . Anyhow when i re uploaded all the files to my new
    domain my drop down javascript wasn't functioning properly .... the
    menu didn't drop down.
    When you go to hostlyon.com it works... but on my new domain
    it doesn't work. What might be causing the problem..... someone
    please help!!!!

    watzursn wrote:
    > Okay will I had a domain hostlyon.com which was changed
    to hostlion.net .
    > Anyhow when i re uploaded all the files to my new domain
    my drop down
    > javascript wasn't functioning properly .... the menu
    didn't drop down.
    >
    > When you go to hostlyon.com it works... but on my new
    domain it doesn't work.
    > What might be causing the problem..... someone please
    help!!!!
    >
    Error: ypSlideOutMenu is not defined
    Source File:
    http://hostlion.net/
    Line: 1
    Mick

  • Several months ago I kept getting prompted to "update" my iphoto library.  I finally gave in and clicked on the update button and EVER SINCE THEN,  ALL of my photos have been 'grayed out' and I can't see ANY of them unless I click on the photo and open it

    Several months ago,  I kept getting prompted to 'update' my iphoto library.  When I finally clicked on the 'update' button,  it 'greyed out' ALL of my photos.  Now ALL of my photos are grayed out and I can't see ANY of my pictures unless I click on each grayed out photo individually and open them,  ALL of the thumbnails are greyed out.  It is THE WORST!!  I have no idea how to fix this problem and its been MONTHS AND MONTHS of *** pain.  Anyone??  Please help!!!
    Thanks so much!!!

    Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - rebuild your iPhoto library database
    and please tell us what version of iPhoto and of the OS you have
    LN

  • Apple Senior tech lady deleted all my external drive data while sorting out other problem. How can I restore all my photos , music etc back to my Mac Pro?(I am so scared, I haven't connected to sync! Please help)

    Apple Senior tech lady deleted all my external drive data while sorting out other problem. How can I restore all my photos , music etc back to my Mac Pro?(I am so scared, I haven't connected iPhone to sync! Please help)

    It was tele tech. I couldn't open my Page Numbers etc. Frist tech chat idiot - following dumping few things in bin, asked me yo upgrade to Yosemite. But the problem still persists. This morning I was asked to do it via telephone and like yesterday, after wasting 20 min, I was put to this apparent Tech Queen ( my foot!). She eventually decided to reinstall  Yosemite asked me to connect my external drive while I connected to her. She was moving cursor asking me to move files and delete and I followed her like a dummy. It took 3/4 hours and she called me 3 times once the lengthy process was completed. I suspected from the beginng for the fact that why should be asking me to click all my backup from the very beginning! Eventually she said I deleted... Or someone else or may be my children ! It was a blatant lie. I run my small business from home and I was simply staying in front of the Mac whole day! Children were at school. Then she said I must have used another computer! I only have laptop and the iPad. I will talk to their manager first thing in the morning. In the mean time please let me know as to how can I transfer photos, music etc back to my laptop from my Iphone and IPad .? I am will connect to laptop as I am worried the new BLANK iPhoto may supersede iphone/iPad stuff? Will it? Please let me know. I am not a very tech savvy person. My son who could help me, is in Manchester Uni and Inam in London.

  • How to reset the BRUSH of the Smudge Tool for CS6 Mac? Accidentally changed the brush, it now leaves choppy marks when all other settings were the same. Please help!!!

    I'm not sure what is going on, but the brush for the Smudge Tool is apparently gone and it leaves these choppy marks instead of its smooth blending, no matter WHAT I do to the brush. It also has this really annoying habit now of starting off with a dark spot that does get blended out, but it never did that before and the setting is on normal.
    Help in resetting the brush? What do I do to fix that?
    Thanks!!!

    In the top tool bar far left side is an icon that looks like the tool being used. Right click on it to choose to reset the menu. An alternative is click on that same icon then in that dialog box is a cog wheel icon, click it will bring up a larger menu, you can choose reset tool there as well.

  • I can't add a midi to my iTunes.  I need to do that, so I can create an mp3 for e-mailing.  It used to be easy to do, but now it can't be done, even when following the instructions on your Help Center page abpit Add Items from your computer...   It says t

    If anyone has a solution to my problem (not being able to add a midi to my iTunes Library, so I can format an mp3, which I need to e-mail to my Webmaster, even tho I've followed the instructions on the Help page), please e-mail me direct : ken at princesf dot com  Thank you!

    Audio files from Midi. Topic Jan., 2012: "iTunes no longer recognizes midi files how can I play and convert them?" - https://discussions.apple.com/thread/3666447

  • HT201299 have updated my iphone 4s to the new iso7. Now i can't find how to switch on the cellular data. Please help.

    Hi
    I have updated my iphone 4s, with the new iso7. Now i can't find how to switch on the cellular data, please help!! Can't find the option in Settings

    Settings>cellular>cellular data

  • When I go into my email account through Safari, I cannot see all of my messages.  26 may show on the screen but it says I have 32.  However, at the bottom right it appears as if all the messages are showing and the arrow to get more is not highlighted.

    When I go to my email account through Safari, I cannot see all of my messages.  It says there are 34 but I can only see 26.   However, at the bottom right  the arrows to go to the next screen are not highlighted?  I also cannot scroll any further down.  Does anyone know how to scroll down to see all of my messages?  I use Travel-net Communications as my email provider (Ottawa, On, Canada).

    hey ,
    if it is showing you 34 mails them it is correct. when you see your mail. apple has a smart way of arranging your mail.suppose you recieve 4 mails from one email id it will show you under one highlighted mail. so when you open a mail from anyone trying scrolling it down and you will find your missing mails.

  • InDesign CS5 stopped working and Can't drag or drop

    A colleague of mine has a Mac G5 with OS 10.5.8 and Adobe InDesign CS5 installed which has suddenly stopped working. On top of that she can't drag or drop items either.  She didn't have this issue yesterday. She didn't install anything new or added any new hardware.
    Does anyone have a solution?

    Hello,
    In the Finder, at the locations/folders she's trying to Drag & Drop, & see if they're Locked or whaat Rights she has.

  • I am unable to create a new entry on the calendar menu, in other words there is no (+) at the bottom right corner of the calendar menu, please help?

    I bought a new iPad 2 and I was trying to create entries on the calendar application but I cannot because there is no plus sign(+) at the bottom right corner of the calendar application. Please assist?

    Try going into Settings > iCloud and toggle Calendars 'off' and 'on' and see if you then get the '+'

  • My macbook pro is stuck on grey screen with apple symbol in center with the progress circle under it continusly spinning. After I had turned it on. Prior to turning it on I had to force close and shut down a few hours prior. Please Help?

    My macbook pro is stuck on grey screen with apple symbol in center with the progress circle under it continusly spinning. After I had turned it on. Prior to turning it on I had to force close and shut down a few hours prior. Please Help I have tried everything I know to do

    Unfortunately this means that there is a problem in the boot sector of your hard drive. It might be indicative of a fundamental corruption in the coding that allows your computer to boot your operating system from your hard drive. I had this problem twice and it resulted in me having to get a new hard drive and restore my data.
    In other words, your computer can't talk to your operating system so you can't access your data.
    Here is my advice: DON'T CALL APPLE TECH SUPPORT though they are kind and usually helpful it will take you an hour just to explain the situation and they will only tell you to do what I'm gonna say here.
    First: Shut down your computer completely
    Two: boot up while holding down the following keys: command, option, p, and r. The computer will reboot 3 times. This solution will likely fail so if you're frustrated skip to the next step.
    Three: Boot up while holding down the option key. Select recovery drive. Select your default language. Select disk utility, click on Macintosh HD, and select "verify and repair volume." Likely the verification will produce some line like "unused node not erased." Or something like that. If anything using the words "node structure" comes up, you need a new hard drive.
    If after verification and repairs you still can't boot I sincerely hope you have apple care because you will need a new hard drive. Set up an appointment to come in to the apple store, they will tell you to go and get data recovery, just ask them to give you the old hard drive. Unless you have an up to date backup in which case you can just restore from that. If you're lucky the only issue is with the boot sector which means that if you ask them to give you the old hard drive, you can buy an enclosure and you have effectively been given a free external hard drive. It still works to store data just not to load an operating system.
    If you have a back up drive bring it to the apple store and they'll do the whole thing right there, it should take around an hour and a half but may take longer.
    Hope this helps, it's annoying but it's your safest bet.
    All the best.

Maybe you are looking for

  • Grand Total on Count Distinct - Crosstab

    Hello I use Discoverer 9.0.2.39.01. On a crosstab layout: the data point is a count distinct item , I use Grand total at bottom and also Grand total at right. Both totals are displayed correct but the cell combining between them is blank. The join be

  • Userfield-Values in Order Recommendation Report lost after update

    Hi together, i've got a problem in the Order Recommendation Report. i've add 3 udf's in the matrix. The problem appears when I update the report. All the values in the userfields are cleared. Can anyone help me to find a solution? Do I have to custom

  • Portal EP 7.3 FQDN Throwing HTTP Internal Error 500 on every link

    Hi Expert, Currently we have a strange issue on the portal 7.3 that might you had this issue also. The problem is, everytime we use the FQDN, all the links in the j2ee / portal will throwing an error 500. Currently the portal was on initial sp level

  • Constructor in Package

    Hi, In a package after declaring a list of procedures and functions, we give the below statement as BEGIN      ProcFromItsOwnPackage; END TestPack; We call this as Constructor. Here, will it run when we call any Procedure or Function from the package

  • PSE13 Organizer crashes every time I want to open a Folder.

    Is not possible to open a folder. PSE13 is installed on a brand-new imac. Is this a problem of this version? How I get rid of it?