I remember when the app took forever to launch?

Well, I just accepted it. Recently OWC said that many Mac's could increase their DRAMM memory well past the limit set by Apple with no bad results plus it would make the Mac more efficient. Well, I bot 2 8GB DRAMMs = 16GB memory & installed them. WOW. It indeed made my MacMini faster PLUS now InDesign loads almost immediately!
Just thought someone out there might like to know.....
I'm running CS6 Design Standard on a MacMini 2.7 (i75,2). Apple states that 8GB DRAMM is the maximum. Well, now I'm using 16GB!

For the apps quickly closing see:
iOS: Troubleshooting applications purchased from the App Store

Similar Messages

Can anyone remember when Preview.app first gained support for bookmarks?

Can anyone remember when Preview.app first gained support for bookmarks?
I think it was either with the advent of Tiger or reasonably early on within it's development (e.g. 10.4.2), although I may well be wrong.
The reason I'm asking is that there used to be a capability in Preview.app that allowed you to open multiple PDFs in one window and print them all at once. I'm wondering about going back through my desks and hunting it out:
http://discussions.apple.com/thread.jspa?threadID=1388297

Ha! Fixed it!
Kept reading all "Preview+plist" threads and found this one: https://discussions.apple.com/message/17195650#17195650
And sure enough, trashing ~/Library/Containers/com.apple.Preview/ reset the preferences for Preview.app and now all key commands work without crashing.
But if erasing that folder, and more importantly the plist in it, did reset the preferences, that would suggest the preferences were being saved there. So I now changed the prefs and quit the app, and then trashed the containers folder again, and restarted the app. But strangely the prefs remained. So I thought, well if the prefs were being stored there, maybe erasing that plist made Preview reinstate the regular plist in the regular Preferences folder? But no go, as there's still no regular Preview plist in the regular Preferences folder.
So now, there's no regular plist, and erasing the Containers folder no longer resets the prefs, but changes to prefs are still being saved somewhere … so where the **** are they being saved now? It's like they just keep burrowing down further into the ground with every attempt to erase them. What the **** is going on? ;-)
Anyways, the initial problem is solved, so … maybe I should just let the mystery remain? ;-)

I recently had to change my email address for the Apple ID and now when the App store comes up it still asks has my old email address and no password will work. What should I taccepts it all fine as does facetime. Help?

I recently changed my email address for the Apple Id and it was accepted but now when the App store comes up it still shows my old email address and no password will work. iCloud and Facetime are fine. Don't know why it stays there or how to alter it.

1. Sign out of old ID
2. Sign in with new ID
Settings>AppStore>Apple ID

When the apple review team review our app,they point out that our app uses a background mode but does not include functionality that requires that mode to run persistently.but in fact,when the app in background ,the app need data update to make the

when the apple review team review our app，they point out that our app uses a background mode but does not include functionality that requires that mode to run persistently。but in fact，when the app in background ，the app need data update to make the function of trajectory replay come ture。in fact， we have added function when the app is in background mode。we have point out the point to them by email。but they still have question on the background mode，we are confused，does anyone can help me，i still don't know why do review team can't find the data update when the app is in background and how do i modify the app，or what is the really problem they refered，do i misunderstand them？
the blow is the content of the review team email：
We found that your app uses a background mode but does not include functionality that requires that mode to run persistently. This behavior is not in compliance with the App Store Review Guidelines.
We noticed your app declares support for location in the UIBackgroundModes key in your Info.plist but does not include features that require persistent location.
It would be appropriate to add features that require persistent use of real-time location updates while the app is in the background or remove the "location" setting from the UIBackgroundModes key. If your application does not require persistent, real-time location updates, we recommend using the significant-change location service or the region monitoring location service.
For more information on these options, please see the "Starting the Significant-Change Location Service" and "Monitoring Shape-Based Regions" sections in the Location Awareness Programming Guide.
If you choose to add features that use the Location Background Mode, please include the following battery use disclaimer in your Application Description:
"Continued use of GPS running in the background can dramatically decrease battery life."
Additionally, at your earliest opportunity, please review the following question/s and provide as detailed information as you can in response. The more information you can provide upfront, the sooner we can complete your review.
We are unable to access the app in use in "http://www.wayding.com/waydingweb/article/12/139". Please provide us a valid demo video to show your app in use.
For discrete code-level questions, you may wish to consult with Apple Developer Technical Support. When the DTS engineer follows up with you, please be ready to provide:
- complete details of your rejection issue(s)
- screenshots
- steps to reproduce the issue(s)
- symbolicated crash logs - if your issue results in a crash log
If you have difficulty reproducing a reported issue, please try testing the workflow as described in <https://developer.apple.com/library/ios/qa/qa1764/>Technical Q&A QA1764: How to reproduce a crash or bug that only App Review or users are seeing.

Unfortunately, these forums here are all user to user; you might try the developer forums or get in touch with the team that you are working with.

How to create a Notification in the Action center when the app is in the suspended state...?

Hi,
I want to send a notification to the action center of Windows phone 8.1, when I get a callback from the lower layer code which I have registered for(I have implemented). I am able to do it when my app is in the foreground. How can I achieve the same when
the app is in the background.(ie. in the suspended state)

Yes Franklin, your understanding is correct. But I cannot use Push Notification, as it require a cloud server to send the raw notification.
Is there any other method, which can be used to trigger the app (ie... the background service registered) to send a toast message, when app is in background. Trigger should be initiated by a lower layer service running as different process. I am looking
for something similar to "Broadcast Receiver" in Android...
Hi Jose,
>>But I cannot use Push Notification, as it require a cloud server to send the raw notification
The Background Task is the only way to make things work in the background in Windows phone, it have some triggers we can use, such as
SystemTrigger,
TimeTrigger, or
NetworkOperatorNotificationTrigger:
https://msdn.microsoft.com/en-us/library/windows/apps/windows.applicationmodel.background.backgroundtaskbuilder.settrigger
I would also recommend you to read this sample:
https://code.msdn.microsoft.com/windowsapps/Background-Task-Sample-9209ade9
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

When the app is being downloaded it doesnt show the icon its like gray icon

When the app is being downloaded it doesnt show the icon, its like a gray icon that appears... does that happen to anyone?

Yes - did not used to happen this way, but started after one of the updates. Once the download completes, the 'regular' app icon should show up. Nothing to worry about.

How do I install InDesign CC when the app overview says "up to date" even though I haven´t installed anything yet?

How do I install InDesign CC when the app overview says "up to date" even though I haven´t installed anything yet?

It sounds like maybe you installed a trial at some point in the past and trashed the application folder rather than doing an uninstall?
Have you tried the cleaner tool:
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

HT204053 What do I do when the app store asks for a credit Card and I don't have one

What do I do when the app store asks for a credit card and I don't have one.

See the following link that discusses doing what you want:
http://support.apple.com/kb/HT2534?viewlocale=en_US&locale=en_US

I'm trying to download a FREE app on my iphone4s and the billing information thing keeps popping up. It wasn't doing that yesterday. What should I do? Idk why I need that info when the app is free

I'm trying to download a FREE app and the billing info thing keeps popping up. It wasn't doing that yesterday. Now I can't even download anything. What should I do ? Idk why I need thus info when the app is free

You must have a payment method in your iTunes account, even for free content. It is used to verify your identity. See: http://support.apple.com/kb/HT2534 for information on how to create a billing method if you don't have a credit card.

Microsoft Office 2011 no longer opens because "there is a problem" after updating mountain lion when the app store said there was an update available this morning. Reinstalling did not work. What's the problem?

Microsoft Office 2011 no longer opens because "there is a problem" after updating mountain lion when the app store said there was an update available this morning. Reinstalling did not work. What's the problem?

Has your problem been solved by the updates??
Have a similar problem. This MacBook opened all MS Office programs in Dec2012 but no longer does in Feb2013. Went to Microsoft/mac/downloads but none of the three updates would run citing a problem "version of software needed to run this update was not found on this volume".
MacBook: 7.1, Intel Core 2 Duo, 2.4 GHz
Microsoft Office 2011: version 14.2.3
Mountain Lion: 10.8.2 (12C60)

Help! iWeb won't open properly after I updated to Yosemite. No old websites, no workspace- nothing is displayed even when the app is open. HELP!

Help! iWeb won't open properly after I updated to Yosemite. No old websites, no workspace- nothing is displayed even when the app is open. HELP!

To open your domain file in Lion, Mountain Lion or Mavericks or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with AppleScript Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
do shell script"/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"
delay 1
tell application "iWeb" to activate
You can download an already compiled version with this link: iWeb Switch Domain. Note: you may have to Control (right) - click on the app after uncompressing and select Open due to the Sandboxing feature of OS X. If you have problems with the app create your own with AppleScript Editor.
Just launch the application, find and select the domain file in your Home/Library/Application Support/iWeb folder that you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder. So rename your domain files once they've been created to something other than the default name.
NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible in Lion or Mt. Lion enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
For Mavericks and Yosemite go to your Home folder and use the View ➙ Show View Options menu to bring the this window:

Getting notification when the APP is closed (Android, iOS)

Hi
I'v been searching for a while with no luck. Is there a way to get notifications even when the APP is not opened.
As I can some native APPs have some kind of notification system which works even if the APP is not opened.
Is there a way to do that with AIR?
Thanks
Behzad

an event is dispatched if your open app is closed
NativeApplication.nativeApplication.addEventListener(Event.EXITING, onExit);
but it doesn't make sense to get notification of i-have-no-idea-what-you're-thinking when your app is already closed.

[svn:bz-4.0.0_fixes] 16148: Update config testsuite on 4.0. 0_fixes branch to force kill the app server before running any tests when the app server is Tomcat .

Revision: 16148
Revision: 16148
Author:   [email protected]
Date:     2010-05-17 06:40:40 -0700 (Mon, 17 May 2010)
Log Message:
Update config testsuite on 4.0.0_fixes branch to force kill the app server before running any tests when the app server is Tomcat. The regression runs were hanging on this branch when going to run the config suite because the Tomcat server isn't shutting down cleanly at the end of the MXUnit run. I believe this is an issue with the version of ActiveMQ we are using. Since I don't think we want to update ActiveMQ on this branch force killing the Tomcat server will workaround the problem.
Modified Paths:
    blazeds/branches/4.0.0_fixes/qa/apps/qa-regress/testsuites/config/build.xml

Hi,
Thanks for the reply. I have tried this on another machine running the same version of Blackboard. It works fine.
Only difference is that the machine that has the JVM crash is running on Fujitsu PrimePower and the OS is Solaris 9 (but twigged for PrimePower).
The one where it runs and starts up successfully is running on SunFire (OS is Solaris 10).
I am wondering if there is a problem with the JVM loading required libraries because of the OS being different versions.
Any leads on this is welcomed. Thank you.
Regards,
Hon Peng
===================
On Fujitsu Primepower
SunOS 5.9 Generic_118558-33 sun4us sparc FJSV,GPUS
the Dependencies for libjvm.so are as follows:
===================
bash-2.05$ ldd -r libjvm.so
libsocket.so.1 => /usr/lib/libsocket.so.1
libsched.so.1 => /usr/lib/libsched.so.1
libdl.so.1 => /usr/lib/libdl.so.1
libCrun.so.1 => /usr/lib/libCrun.so.1
libm.so.1 => /usr/lib/libm.so.1
libthread.so.1 => /usr/lib/libthread.so.1
libc.so.1 => /usr/lib/libc.so.1
libnsl.so.1 => /usr/lib/libnsl.so.1
libmp.so.2 => /usr/lib/libmp.so.2
/usr/platform/FJSV,GPUS/lib/libc_psr.so.1
=====================================
On SunFire, Sun machine
SunOS 5.10 Generic_118833-36 sun4u sparc SUNW,Sun-Fire-280R
the dependencies are different for the libjvm.so:
=====================================
bash-2.05$ ldd -r libjvm.so
libsocket.so.1 => /lib/libsocket.so.1
libsched.so.1 => /usr/lib/libsched.so.1
libdl.so.1 => /lib/libdl.so.1
libCrun.so.1 => /usr/lib/libCrun.so.1
libm.so.1 => /lib/libm.so.1
libthread.so.1 => /lib/libthread.so.1
libc.so.1 => /lib/libc.so.1
libnsl.so.1 => /lib/libnsl.so.1
libmp.so.2 => /lib/libmp.so.2
libmd5.so.1 => /lib/libmd5.so.1
libscf.so.1 => /lib/libscf.so.1
libdoor.so.1 => /lib/libdoor.so.1
libuutil.so.1 => /lib/libuutil.so.1
/platform/SUNW,Sun-Fire-280R/lib/libc_psr.so.1
libm.so.2 => /lib/libm.so.2
/platform/SUNW,Sun-Fire-280R/lib/libmd5_psr.so.1

I cannot change apple id when the app store asks me to update anything

i cannot change apple id when the app store asks me to update anything

App Store products can only be updated by signing in to the store with the same Apple ID that was originally used to download them. You can't update anything, including your own purchases, as long as there are pending updates linked to the other ID.
If you can't sign in with the other ID, you have to delete all the apps that are linked to it. If you don't know which apps those are, see below.
1. Triple-click anywhere in the line of text below on this page to select it:
kMDItemAppStoreHasReceipt=1
Copy the selected text to the Clipboard by pressing the key combination command-C.
2. In the Finder, press command-F to open a search window, or select
          File ▹ Find
from the menu bar. In the search window, select
          Search: This Mac
from the row of tokens below the toolbar. Below that is a popup menu of search criteria, initially showing Kind. From that menu, select
          Other...
A sheet will drop down. In that sheet, select
          Raw Query
as the criterion, then click OK or press return.
Now there will be a text box to the right of the menu of search criteria. That's where you enter the raw search query. Click in that box and paste the text you copied earlier by pressing command-V.
3. The search window will now show all the App Store products that are installed. Compare those search results with the list of your purchases from the App Store. To see the complete list, you may need to unhide hidden purchases. If any apps were download from the App Store using other Apple ID accounts that you control, sign in to the store under each of those ID's and check the purchases.
4. At least one of the apps in the Spotlight search results is not among your purchases in the App Store. Delete each such item by following the instructions in the Apple Support article linked above.
5. Quit and relaunch the App Store.
If you find these instructions confusing, ask for an alternative method.

How can I purchase items for app when the app was loaded on another ID before? I has to Chang my AppleID and also transferred an app to new phone. I can't purchase items for app because it wants me to buy the app through new ID. The app was free.

How can I purchase items for app when the app was loaded on another ID before? I has to Chang my AppleID and also transferred an app to new phone. I can't purchase items for app because it wants me to buy the app through new ID. The app was free.

All apps (and other content from the store) are tied to the account that downloaded them, whether or not they are free. To do in-app purchases in that app you will either need to log in with the account that downloaded it, or delete it (which will delete its content) and download it with your currently logged in account if you want to do IAPs on that account.

I remember when the app took forever to launch?

Similar Messages

Maybe you are looking for