I reset my iPad Mimi now it's taking forever to download

I can't get my iPad Mimi to download

Download what? You really need to provide some more information.

Similar Messages

I have reset my ipad 2,now it is showing connect to itunes

i have reset my ipad 2,now it is showing connect to itunes.
how to fix this problem?

What does "reset" mean anyway? You held the sleep and home buttons down until the Apple logo appeared on the screen? You restored the iPad?
Doesn't really matter because the message that you are getting on the screen is telling you what to do. Connect the iPad to your computer's iTunes and restore your iPad iOS software. Something went wrong when you "reset" your iPad.
This will explain how to do it.
http://support.apple.com/kb/ht1414

TS3274 I reset my Ipad and now the only thing on the screen is an apple. Help! What to I do?

I reset my Ipad and now the only thing on the screen is an apple. Help!

Is you iPad jailbroken?
Restoring iOS software
http://support.apple.com/kb/ht1414
 Cheers, Tom

I reset my iPad and now when I try to sign in it won't accept my password

I reset my iPad and now when I try to sign in it won't accept my password. The message I get is, "Unable to join network"

Try this:
1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings
3. Reset iPad; hold the Sleep and Home button down until you see the Apple Logo

I just reseted my ipod and now it won't let me download any apps. Why?

i just reseted my ipod & now it won't let me download any apps. Why?

Hi
I'm having the same problem on my iPads, iPods and iPhones. All use the same apple I'd for the App Store.
Has been like this for a few days. Happening with updates, new apps and if I delete and try to re-download.

Factory reset my ipad but now its saying the activation server isnt available can anyone help

factory reset my new ipad but it is now saying that the activation server isnt available, has anyone got any ideas please?

Ring 133622

I reset my iPad and now its back to factory settings. Except those are in Chinese. Help!

I did a full reset of my ipad. Which i have done before; its never been a big deal. Until this time when everything is in chinese. Is there some way i can navigate around this? Help!

If the iPad is in a language that you don't understand then see if this page helps you change it : http://support.apple.com/kb/HT4051

I reset my ipad and now it went blank

i went to settings ns put erase all content..... and the screen went blank nd the only thign on the screen is a itunes sign nd a usb cord . i feel like it means plug it to the computer and thats wht i diod but im lost

If you connected the iPad to your computer, did iTunes start up on your computer? If it didn't then launch iTunes on your own and see if it takes you through the activation process. You erased all content and settings so you are starting over again.

I had to reset my iPad and now can't log in using my Apple ID.

The request to log in keeps timing out. Anybody got a suggestion for me? I'm using the iPad as my planner, so I'm in some serious difficulty if I can't get back into it!

Try locating your account first - http://support.apple.com/kb/HE34 - then contact support for assistance if you'll have a hard time doing so.
https://expresslane.apple.com

HT1212 I completed the steps and reset my IPad. Now what it still says disabled. This is not the origninal computer that I set up on.

What is wrong with this thing?

Hello ahuycke,
I would be be concerned too if I was not able to access my iPad. If you have not resolved the issue, I recommend following the steps in the article belowfor an issue like this:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
As always, it is a good idea to create a backup before hand:
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
Thank you for using Apple Support Communities.
Best,
Sheila M.

HT201209 Yes my iTunes card code was coded into my new ipad 4 with an email address that I could not verify it on!! I have since reset my iPad AGAIN & now I cannot put the code of iTunes card through on this email!!!! HELP

My iTunes card was coded into my new iPad4 with an email that I could not verify my card...my new email will not let me use this code again!!! Please can anyone HELP????

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

My imac restarted but now it is taking forever

I upgraded from Mavericks to Yosemite and my imac restarted after installing. I entered my password and now there is a progress bar that has moved halfway after over an hour. I tried restarting the computer but that did not help. Is it normal to take this long? My new laptop had no problems.
I cannot give any specs because I cannot bring that info up on the computer.
Thanks for any help.
Catherine

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

My iPad is taking forever to download anything since I got the new iOS7. How do I fix this?

It's taking at least an hour to download any app or tv episode. It never used to take this long until it recently updated my iPad. I'm using the exact same internet connection I did before. What can I do to speed up my downloads? I'm getting very frustrated. This is on my IPad2

Has the unit EVER been jailbroke? Has it EVER been dropped? Did it EVER get excessively wet? Did you EVER load a pirated developer's version of the IOS?
If "No" to all the above, first try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore and you have IOS-6 or lower, go into Recovery Mode per the instructions here. Also, if you have IOS-7, read this.

I generally back up and restore my iphone every week... and this time i backed it up..and i can see that backup time and file size.. now.. when i try to restore my iphone.. i select the back up and now it is taking forever to restore. help me

i generally back up and restore my phone every week.. just that i dont have any problem with the network issues. !!
today at 00:46 1st june.. i backed up my iphone and it was perfect...
when i try to restore it.. it is taking 15+ hours .. and that time stays like that for almost 3 hours... it does not happen.
i even called the apple help center. and they said me to install as a new device... and when i said what wil happen to my messages.. they say .. they wont stay.. and wil be deleted.. and all my apps i need to download again..
but earlier i din need to do any of it.!!! it worked really fine .!!!
please help me..!!! i got some important details in this back up.... please help me.!!!

Once in a while the restore process seems to mess up. What I don't understand is why you would perform a weekly restore.
At any rate, if you must restore, perform a device reset (settings>general>reset) and then you will have the opportunity to restore from iCloud. Restore a device whenever it no longer works correctly, not just as a matter of maintenance. If it ain't broke, don't fix it.

So I just updated to the osx and it had me log back into my i cloud and I hit I forgot my pass word and now it's taking forever to load and I need it. And it won't let me shut it down . What do I do?

Please help

If you're on windows try the following:
This worked for me an hour ago and has allowed me to sync ok. Still haven't tried downloading the new version 5 to the phone yet as I'm still backing up photos etc just in case.
1. Quit itunes
2. Start an elevated command prompt (Start Menu -> All Programs -> Accessories -> right click Command Prompt -> Run as Administrator)
3. Once in the command prompt type the following 3 words starting where your cursor is flashing: netsh winsock reset
4. press ENTER
5. Reboot your machine
6. Restart itunes & connect device to sync
7. Good luck

I reset my iPad Mimi now it's taking forever to download

Similar Messages

Maybe you are looking for