I see a message in notification center but can't read it in the message app because it is not here.

Just "received" a message from a friend but i can't see it in the message application. There is the red "1" digit upon the message icon and i see the message in the notification center so i don't understand how to solve the problem.
Cheers.

The next steps in user troubleshooting are a restore from backup, and if necessary a restore as a new device, not from a backup. Perform what is necessary.

Similar Messages

User Executes Stored Procedure That Executes sp_send_dbmail; receives email but also gets error Cannot alter the queue 'ExternalMailQueue', because it does not exist or you do not have permission.

Using SQL Server 2012 SP1
I have a user that is submitting a procedure that uses sp_send_dbmail. I have also noticed that they have the following code in their procedure
DECLARE @rc INT
IF NOT EXISTS (SELECT * FROM msdb.sys.service_queues
WHERE name = N'ExternalMailQueue' AND is_receive_enabled = 1)
EXEC @rc = msdb.dbo.sysmail_start_sp
The user submits the procedure and she gets the email but she also gets the following error message:
Msg 15151, Level 16, State 1, Procedure sysmail_start_sp, Line 8
Cannot alter the queue 'ExternalMailQueue', because it does not exist or you do not have permission.
Mail (Id: 2402) queued.
(1 row(s) affected)
I have granted execute to sp_send_dbmail and sysmail_start_sp. I have also granted select to service_queues.
Does anyone have any solutions for the above error message?
lcerni

The contents of sysmail_start_sp is this:
CREATE PROCEDURE sysmail_start_sp
AS
SET NOCOUNT ON
DECLARE @rc INT
   DECLARE @localmessage nvarchar(255)
ALTER QUEUE ExternalMailQueue WITH STATUS = ON
SELECT @rc = @@ERROR
IF(@rc = 0)
BEGIN
ALTER QUEUE ExternalMailQueue WITH ACTIVATION (STATUS = ON);
   SET @localmessage = FORMATMESSAGE(14639, SUSER_SNAME())
   exec msdb.dbo.sysmail_logmailevent_sp @event_type=1, @description=@localmessage
END
RETURN @rc
The user get the error, because she does not have any permission on the queue in question. To be able to alter the queue, the following applies according to Books Online:
Permission for altering a queue defaults to the owner of the queue, members of the db_ddladmin or db_owner fixed database roles, and members of the sysadmin fixed server role.
Note that is would be db_ddladmin or db_owner in msdb. Now, supposedly the queue is already active, and in that case I think that it is sufficient that the user has VIEW DEFINITION on the view. This would permit her to see the row in sys.service_queues,
why there would be no need to call sysmail_start_sp.
Altertanively, change the check to:
DECLARE @isenabled bit
SELECT @isenabled = (SELECT is_receive_enabled FROM msdb.sys.service_queues
               WHERE name = N'ExternalMailQueue')
IF @isenabled = 0
   EXEC @rc = msdb.dbo.sysmail_start_sp
The idea here is that, if the user has no permission to read the information in the DMV, @isenabled will be NULL, and you just pray and hope that the queue is up and running.
I suspect that the reason this worked for you on SQL 2005 is that on that instance someone at some point in made all the required configurations for it to work, but all that is forgotten now. That happens to me too.
If you really want the user to be able to start the queue, I have some better ideas than adding her to a role, but I skip the details for now.
Erland Sommarskog, SQL Server MVP, [email protected]

How do you use Time Machine to restore a specific users account? I can't do it from the user screen because I am not allowed. I can't do it from the admin because I can't see other users in Time machine.

I can't restore my user account from the users screen because I get an alert that Mac OS needs something. I can't restore in TimaeMachine from the Admin screen because I can't see other users home folders. What can I do?

See Pondini's TM FAQs for starters.

HT4910 i save my photos to camera roll. then back up but can't see it on icloud. why? we just lost 300 photos on my other iphone because we do not get proper help. that's why i need to learn now.

i save my photos to camera roll. then back up but can't see it on icloud. why? we just lost 300 photos on my other iphone because we do not get proper help. that's why i need to learn now.

You can't view your back up files at icloud.com.
You can't view your camera roll and you can't view your Photo Stream files at icloud.com.
The icloud back up plan allows you to "restore" your iOS device from the files you backed up at icloud.com.

When I swipe down the notification center, I can not find "tap to tweet" or "tap to post." How can I put it back?

When I swipe down the notification center, I can not find "tap to tweet" or "tap to post." How can I put it back?

Hi there,
When I swipe down the notification center, I can not find "tap to tweet" or "tap to post." How can I put it back?
I can help you with that!
Go to Settings > Notifications > Share Widget and toggle Notification Center to ON.
If Notification Center is OFF in the Share Widget, then the Share Widget will be located under the sub-heading "Not In Notification Center."
If Notification Center is ON in the Share Widget, then the Share Widget will be located under the sub-heading "In Notification Center."

I connect my mic with an M-audio mobile pre usb device. When I try to record, I can see that my voice is recording but can't hear it during playback.

I connect my mic with an M-audio mobile pre usb device. When I try to record, I can see that my voice is recording but can't hear it during playback. I tried different input and output settings but it didn't help. Any help will be appreciated.

Hear your microphone or instrument as you play and record (monitoring)
You can hear, or monitor, input from an instrument or microphone in GarageBand while you play and record. When you turn on monitoring for a track, you hear the musical instrument or microphone connected to the track’s input. Monitoring lets you hear yourself play so that you can hear the part you want to record as well as the rest of the project.
You can turn on monitoring for a Real Instrument track or Electric Guitartrack from the track’s header, or in the Track Info pane. Electric Guitar tracks always show their monitoring buttons, and you can show monitoring buttons for Real Instrument tracks using a menu command. You can use monitoring with feedback protection to avoid feedback while you play.
Hide
To turn on monitoring in the track header:
Choose Track > “Show Monitoring for Real Instrument Tracks.”Monitor buttons appear in the headers of Real Instrument tracks. On tracks with monitoring turned on, the button lights yellow.
Click the Monitor button in the header of the track you want to use.
HideTo turn on monitoring in the Track Info pane:
Double-click the header of the Real Instrument or Electric Guitar track you want to turn on monitoring for.The Track Info pane opens.
From the Monitor pop-up menu, choose one of the following:
Choose Off to turn off monitoring. You can hear your instrument only while you record.
Choose On to turn on monitoring and protect against feedback.
Choose On (no feedback protection) to turn on monitoring without feedback protection. If the input level is too high, it may cause feedback (especially if you are using a microphone and listening to your project through your computer speakers).
For an Electric Guitar track, you can view the Monitor pop-up menu by clicking Edit, and then clicking the back side of the amp. The Monitor pop-up menu appears with the input controls below the stage.
You should usually turn off monitoring when you are not playing or singing. When monitoring is turned on, your computer can pick up output from your speakers or monitors, causing unwanted feedback. Using headphones rather than speakers to listen to your projects can help eliminate feedback.
If you select your computer’s built-in microphone as the audio input, in the Audio/MIDI pane of GarageBand preferences, monitoring is turned off for all Electric Guitar tracks to avoid unwanted noise.
SEE ALSO
If you don’t hear sound from a Real Instrument
Was this page helpful?Send feedback.
© 2010 Apple Inc. All rights reserved.

Have downloaded the newest version of garageband but can't open it: getting the following message:

I have Macbook Air that had garageband pre-installed. I am trying to upgrade to the latest version. I get the following message when i try to execute the downloaded file:
The version of GarageBand installed on this Mac must be updated through the Mac App Store. Check the Mac App Store to see if an update is available.
And I did it through the mac apps store....so i don't get it!

There's an enigmatic post.
If you want help you’ll need to give us more information. There are 9 different versions of iPhoto and they run on 8 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.
Posts that consist of "iPhoto doesn't work. Help" or "iPhoto won't print" or "Suddenly I have no photos!!!!!!!!!!" mean that any helper is simply guessing.

We feel it better to have a status bar in firefox.we got it in firefox3 but can't find in firefox4&lettest.its really embarrasing for us not to see the exact status of browsing.is there any solution to browse lettest version with old status bar.pls answer

we feel it better to have a status bar in firefox.we got it in firefox3 but can't find in firefox4&lettest.its really embarrasing for us not to see the exact status of browsing.is there any solution to browse lettest version with old status bar.please answer or we have to use the old one because its very ugly to see a revolving status.

I checked the status of the server and hard drive by booting off of the 10.4 installation disk, select utilities and disk utility.
I know very little about terminal, however I'm pretty good at dos so I can figure some things out if given some commands.
Anyway, I ran some commands and here are the results:
megaraid -showstatus
MEGARAID CLI version 1.0.12
No cmd argument
Um, so I think I remebered the command incorrectly and I did -showdevices instead. Sorry.
megaraid -showdevices
Physical devices Available = 3
Drive ID Identification Size(MB) Status
0 Hitachi HDS722580VLSA80 78529 Failed
1 Hitachi HDS722580VLSA80 78529 Online
2 Hitachi HDS722580VLSA80 78529 Online
diskutil list
/dev/disk0
#: type name size identifier
0: Applepartitionscheme *153.3GB disk0
1: Applepartitionmap 31.5KB disk0s1
2: AppleHFSServer HD 153.2GB disk0s3
/dev/disk1
#: type name size identifier
0: Applepartitionscheme *2.6GB disk1
1: Applepartitionmap 31.5KB disk1s1
2: AppleDriveATAPI 4.0KB disk1s2
/dev/disk2
#: type name size identifier
0: untitled *467.0KB disk2
/dev/disk3
#: type name size identifier
0: untitled *95.0KB disk3
/dev/disk4
#: type name size identifier
0: untitled *95.0KB disk4
/dev/disk5
#: type name size identifier
0: untitled *95.0KB disk5
/dev/disk6
#: type name size identifier
0: untitled *219.0KB disk6
megaraid -showconfig
Logical Drive RAID Level Stripe Size(KB) Size(MB) Status
0 5 64 156958 Degraded
megaraid -showapater
FW Version = A130
Bios Version = G117
Product Name = MegaRAID SATA 150-4D
Cache Size = 64MB
diskutil checkRAID
No RAID sets found
Thank you for your help. I really appreciate it and so do the teachers and the students!

I do not see my messages app on my iphone

i do not see my messages app on my iphone

It cannot be deleted.
Search all home screens and folders.
If still unable to find it, go to Settings > General > Reset > Reset Home Screen Layout to put it back in the default position.

You see this message either because your Flash Player is outdated or because you disabled JavaScript in your browser.

When going to several sites that play videos I get the following error on the page instead of the video. You see this message either because your Flash Player is outdated or because you disabled JavaScript in your browser.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

While trying to open iPhoto this message coming-You can't the application "iPhoto" because it is not supported on this type of Mac

I recently upgraded my MacBook from Moutain Lion to Maverick.After upgrading I can not open the iPhoto.Whenever I try to open I get the message --You can't open the application "iPhoto" because it is not supported on this type of Mac.Tell me how to solve the problem?

To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2. Download it from the App Store to reinstall It's on your Purchases List* there.
For older versions that have been installed from Disk you'll need these additional steps:
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 or later they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
*Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

I am trying to install Firefox 4 on my Mac OS 10.5.8 and I get the error message "You cannot open the application "Firefox" because it is not supported on this architecture" Help!

I am trying to install Firefox 4 on my Mac OS 10.5.8 and I get the error message "You cannot open the application "Firefox" because it is not supported on this architecture" Help!

Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
Mozilla are working to prevent Mac users with non-compatible systems from getting the notification about Firefox 4, and also not displaying the "Download Firefox 4" button on http://www.mozilla.com

Shapes are already on Ai CC Library but can't drag them to the canvas, why?

I created some images on Adobe Shape and saved them for Illustrator CC; I can see them on the Ai Library but can't drag them to the canvas. If I double-click on one thumbnail this message appears: This item isn’t directly editable in Illustrator, but it can be placed in a document. To place the item, drag it into an open document.
- I thought that it CAN be editable in Ai.
- Drag doesn't happen.
Can you please tell me what to do?
Thanks.

Hello sarahginax,
You may need to enable 'manual mode' in the iPhone, then drag these songs to the iPhone. At that point you should be able to remove the songs as desired.
Managing content manually on iPhone, iPad, and iPod
http://support.apple.com/kb/HT1535
If still unable to remove these entries, you'll need to backup and restore the iPhone.
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
Cheers,
Allen

I cannot import my photos to iPhoto but can using another user sharing the same library.

I am trying to import my photos on my main user account on my iMac to iPhoto 11. I am running Mac OS X Version 10.7.5
When I try to upload using my main user account it will not upload the photos. It gives an error message "iPhoto cannot import your photos because there was a problem downloading an image. I also get urecognised file format from my Cannon SLR. The crazy thing is, I share the same library with my wifes user account on the same Mac and the images upload without any issues. I can see them in my user account but when I try to open the landscape files I get an exclamation mark on a black background.
Any help with this will be appreciated.

The exclamation mark means that iPhoto has lost/broken the file path to the original/master file. Apply the two fixes below in order as needed to reair the library:
Fix #1
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - run Option #4 to rebuild the database.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button and select the library you want to add in the selection window..
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

I downloaded Firefox 4 onto my PowerPC G4 1.67GHz running Mac OSX 10.5.6. When I try to open it I get error message You cannot open the application "Firefox" because it is not supported on this architecture. I can't find my Firefox 3.6.16 I'm on Safari.

I just want to download Firefox 3.6 again
I downloaded Firefox 4 onto my PowerPC G4, 1.67GHz running Mac OSX 10.5.6. When I try to open it I get error message You cannot open the application “Firefox” because it is not supported on this architecture.

Use Tony's suggestion. I am running it right now and it is awesome. I love Mozilla but they basically screwed all of those older Macs over. Come on Mozilla. These Macs still work, and there are plenty of people with them out there.

I see a message in notification center but can't read it in the message app because it is not here.

Similar Messages

Maybe you are looking for