I seem to be unable to follow date sequences in Numbers

Hi all, when I create a sheet in Numbers, in many instances, I like to highlight things such as
all dates that fall on a Sunday like this:
However, when I click on each date in succession all the system does is to group all days in between e.g if I click on the 8th Sept, and then want to highlight each Sunday after that, I click on the 15th but the system throws a frame around all 8 days, instead of just letting me just click on those dates that I wish to highlight i.e. 15th, 22nd and 29th. I was able to do what I'm trying to explain with iWork '08, but this '09 version is just not doing what I want it to do, or am I missing something?

Sapper,
It seems you post is missing the screenshot or image you meant to include:
I think based on your description you want to select non-contiguous cells. In this case click the first cell, then hold the <COMMAND> key while click other cells:
As you can see the cells that are highlighted are NOT all contiguous.

Similar Messages

HT1766 I keep getting the following message, Unable to load data class information from Sync Services

I keep getting the following message when I try to sync. Unable to load data class information from service. Reconnect or try again late

Try this
iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert

When I attempt to sych with I tunes I get the following Error Message. "Itunes was unable to load data class information from synch services. Reconnect or try again later." How do I fix this? This started happening after I updated to the latest version

When I attmpt to synch my Iphone I get the following error message. "Itunes was unable to load data class informationfrom synch services. Reconnect or try again later. This started after I uddated to the latest version of Itunes. What should I do?

My iPods are working fine...this is just on our iPhone 3GSs....friend said his iPhone 4 was working fine with upgrade.
Tried: the winsock reset, uninstall/re-install of iTunes, shut the firewall down. Even called Apple...and after 2 hours of being told that "I'm savvy and have done everything they'd recommend" still with no fix...
Still: Takes over 2 minutes (not hooked up to phone) to open Edit-Preferences-Device...and can't find any backups?!?! Takes over 2 minutes to even open the phone to change spps, musice, books, etc....but won't let me do anything with contacts...wonder if this is what that error message is about (because I don't actually sync to an email program, I've just kept it all on the phone - mistake).
**banging head on table**

I keep getting the following message every time i plug in my Iphone to Itunes on my windows vista computer Itunes was unable to load data class information from sync services. reconnect or try again later. any suggestions pls Mario

I keep getting the following message every time i plug in my Iphone3gs to Itunes on my windows vista computer
Itunes was unable to load data class information from sync services. reconnect or try again later.
any suggestions pls
Mario

The article says that I should upgrade to the latest iTunes. I am on the latest iTunes version.
If you could read just a tiny little bit further, under the "Additional Information" section immediately after that, it says:
If you are still experiencing this issue when syncing, or have not installed Xcode 4 and get this alert:
Follow the troubleshooting steps in Mac OS X v10.5, v10.6: Resetting the SyncServices folder.
If the issue is still unresolved, follow steps in Sync Services: Advanced troubleshooting for contact and calendar syncing.
Have you tried those measures?

Cannot sync devices. Get the following message, "iTunes was unable to load data class information from Sync Services..." Any help?

Can anyone help me with syncing my devices?
I'm on a PC that I had to recover, but forgot to save my iTunes data for post recovery.
Now I get the following message, "iTunes was unable to load data class information from Sync Services..."
Thanks!

Sync Your iOS Device with a New Computer Without Losing Data
http://www.howtogeek.com/104298/sync-your-ios-device-with-a-new-computer-without -losing-data/
Syncing to a "New" Computer or replacing a "crashed" Hard Drive
https://discussions.apple.com/docs/DOC-3141
 Cheers, Tom

Why am I getting the following message - itunes was unable to load data class information from sync services

Has anybody received this message when trying to sync? - itunes was unable to load data class information from sync services. All purchased apps were lost. Do you know how to recover them?

Sync Your iOS Device with a New Computer Without Losing Data
http://www.howtogeek.com/104298/sync-your-ios-device-with-a-new-computer-without -losing-data/
Syncing to a "New" Computer or replacing a "crashed" Hard Drive
https://discussions.apple.com/docs/DOC-3141
 Cheers, Tom

Receiveing "Unable to load data from Sync Services" message following iOS 5 Upgrade on iPhone 4 w/ Windows Vista, iTunes 10.5.1. How do I repair?

I upgraded my phone to iOS 5 yesterday. Lost several apps which I restored through my Purchased list in the iStore. Now when I try to sync the phone using iTunes, I receive an error message advising iTunes is unable to load data from Sync Services, and to disconnect and try again later. Have tried again later...no difference. After I acknowledge the error, iTunes continues to say it is Syncing the phone, but it continues to idle.
I have an iPhone 4. I am running iTunes 10.5.1.42 on a Windows Vista system.
What do I need to do to clear this up?

http://support.apple.com/kb/TS2690

So, I'm new to Itunes and seem to be unable to download my selected tunes. What am I doing or not doing. I seem to be following instructions, what little there are.

So,I'm new to itunes and seem to be unable to download tunes to my computer. The instructions make it so simple to sign on, but, not to download.

Call Apple Care. They will either help you over the phone, or they will help you send it in for repair (it takes only a few days to do that - you usually have it back literally two or three days after you send it in)...What you are describing is something malfunctioning and that is NOT usual for a mac.

TcpListener not working on Azure: Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host

Hi Everybody,
i'm playing a little bit with Windows Azure and I'm blocked with a really simple issue (or maybe not).
I've created a Cloud Service containing one simple Worker Role. I've configured an EndPoint in the WorkerRole configuration, which allows Input connections via tcp on port 10100.
Here the ServiceDefinition.csdef file content:
<?xml version="1.0" encoding="utf-8"?>
<ServiceDefinition name="EmacCloudService" xmlns="http://schemas.microsoft.com/ServiceHosting/2008/10/ServiceDefinition" schemaVersion="2014-01.2.3">
<WorkerRole name="TcpListenerWorkerRole" vmsize="Small">
<Imports>
<Import moduleName="Diagnostics" />
<Import moduleName="RemoteAccess" />
<Import moduleName="RemoteForwarder" />
</Imports>
<Endpoints>
<InputEndpoint name="Endpoint1" protocol="tcp" port="10100" />
</Endpoints>
</WorkerRole>
</ServiceDefinition>
This WorkerRole is just creating a TcpListener object listening to the configured port (using the RoleEnvironment instance) and waits for an incoming connection. It receives a message and returns a hardcoded message (see code snippet below).
namespace TcpListenerWorkerRole
using System;
using System.Net;
using Microsoft.WindowsAzure.ServiceRuntime;
using System.Net.Sockets;
using System.Text;
using Roche.Emac.Infrastructure;
using System.IO;
using System.Threading.Tasks;
using Microsoft.WindowsAzure.Diagnostics;
using System.Linq;
public class WorkerRole : RoleEntryPoint
public override void Run()
// This is a sample worker implementation. Replace with your logic.
LoggingProvider.Logger.Info("TcpListenerWorkerRole entry point called");
TcpListener listener = null;
try
listener = new TcpListener(RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint1"].IPEndpoint);
listener.ExclusiveAddressUse = false;
listener.Start();
LoggingProvider.Logger.Info(string.Format("TcpListener started at '{0}:{1}'", RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint1"].IPEndpoint.Address, RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint1"].IPEndpoint.Port));
catch (SocketException ex)
LoggingProvider.Logger.Exception("Unexpected exception while creating the TcpListener", ex);
return;
while (true)
Task.Run(async () =>
TcpClient client = await listener.AcceptTcpClientAsync();
LoggingProvider.Logger.Info(string.Format("Client connected. Address='{0}'", client.Client.RemoteEndPoint.ToString()));
NetworkStream networkStream = client.GetStream();
StreamReader reader = new StreamReader(networkStream);
StreamWriter writer = new StreamWriter(networkStream);
writer.AutoFlush = true;
string input = string.Empty;
while (true)
try
char[] receivedChars = new char[client.ReceiveBufferSize];
LoggingProvider.Logger.Info("Buffer size: " + client.ReceiveBufferSize);
int readedChars = reader.Read(receivedChars, 0, client.ReceiveBufferSize);
char[] validChars = new char[readedChars];
Array.ConstrainedCopy(receivedChars, 0, validChars, 0, readedChars);
input = new string(validChars);
LoggingProvider.Logger.Info("This is what the host sent to you: " + input+". Readed chars=" + readedChars);
try
string orderResultFormat = Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\xB")) + @"MSH|^~\&|Instrument|Laboratory|LIS|LIS Facility|20120427123212+0100||ORL^O34^ORL_O34| 11|P|2.5.1||||||UNICODE UTF-8|||LAB-28^IHE" + Environment.NewLine + "MSA|AA|10" + Environment.NewLine + @"PID|||patientId||""""||19700101|M" + Environment.NewLine + "SPM|1|sampleId&ROCHE||ORH^^HL70487|||||||P^^HL70369" + Environment.NewLine + "SAC|||sampleId" + Environment.NewLine + "ORC|OK|orderId|||SC||||20120427123212" + Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\x1c\x0d"));
writer.Write(orderResultFormat);
catch (Exception e)
LoggingProvider.Logger.Exception("Unexpected exception while writting the response", e);
client.Close();
break;
catch (Exception ex)
LoggingProvider.Logger.Exception("Unexpected exception while Reading the request", ex);
client.Close();
break;
}).Wait();
public override bool OnStart()
// Set the maximum number of concurrent connections
ServicePointManager.DefaultConnectionLimit = 12;
DiagnosticMonitor.Start("Microsoft.WindowsAzure.Plugins.Diagnostics.ConnectionString");
RoleEnvironment.Changing += RoleEnvironment_Changing;
return base.OnStart();
private void RoleEnvironment_Changing(object sender, RoleEnvironmentChangingEventArgs e)
// If a configuration setting is changing
LoggingProvider.Logger.Info("RoleEnvironment is changing....");
if (e.Changes.Any(change => change is RoleEnvironmentConfigurationSettingChange))
// Set e.Cancel to true to restart this role instance
e.Cancel = true;
As you can see, nothing special is being done. I've used the RoleEnvironment.CurrentRoleInstance.InstanceEndpoints to retrieve the current IPEndpoint.
Running the Cloud Service in the Windows Azure Compute Emulator everything works fine, but when I deploy it in Azure, then I receive the following Exception:
2014-08-06 14:55:23,816 [Role Start Thread] INFO EMAC Log - TcpListenerWorkerRole entry point called
2014-08-06 14:55:24,145 [Role Start Thread] INFO EMAC Log - TcpListener started at '100.74.10.55:10100'
2014-08-06 15:06:19,375 [9] INFO EMAC Log - Client connected. Address='196.3.50.254:51934'
2014-08-06 15:06:19,375 [9] INFO EMAC Log - Buffer size: 65536
2014-08-06 15:06:45,491 [9] FATAL EMAC Log - Unexpected exception while Reading the request
System.IO.IOException: Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host. ---> System.Net.Sockets.SocketException: An existing connection was forcibly closed by the remote host
at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)
--- End of inner exception stack trace ---
at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)
at System.IO.StreamReader.ReadBuffer(Char[] userBuffer, Int32 userOffset, Int32 desiredChars, Boolean& readToUserBuffer)
at System.IO.StreamReader.Read(Char[] buffer, Int32 index, Int32 count)
at TcpListenerWorkerRole.WorkerRole.<>c__DisplayClass0.<<Run>b__2>d__0.MoveNext() in C:\Work\Own projects\EMAC\AzureCloudEmac\TcpListenerWorkerRole\WorkerRole.cs:line 60
I've already tried to configure an internal port in the ServiceDefinition.csdef file, but I get the same exception there.
As you can see, the client can connect to the service (the log shows the message: Client connected with the address) but when it tries to read the bytes from the stream, it throws the exception.
For me it seems like Azure is preventing the retrieval of the message. I've tried to disable the Firewall in the VM in Azure and the same continues happening.
I'm using Windows Azure SDK 2.3
Any help will be very very welcome!
Thanks in advance!
Javier
En caso de que la respuesta te sirva, porfavor, márcala como válida
Muchas gracias y suerte!
Javier Jiménez Roda
Blog: http://jimenezroda.wordpress.com

hi Javier,
I changed your code like this:
private AutoResetEvent connectionWaitHandle = new AutoResetEvent(false);
public override void Run()
TcpListener listener = null;
try
listener = new TcpListener(
RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint"].IPEndpoint);
listener.ExclusiveAddressUse = false;
listener.Start();
catch (SocketException se)
return;
while (true)
IAsyncResult result = listener.BeginAcceptTcpClient(HandleAsyncConnection, listener);
connectionWaitHandle.WaitOne();
The HandleAsync method is your "While (true)" code:
private void HandleAsyncConnection(IAsyncResult result)
TcpListener listener = (TcpListener)result.AsyncState;
TcpClient client = listener.EndAcceptTcpClient(result);
connectionWaitHandle.Set();
NetworkStream netStream = client.GetStream();
StreamReader reader = new StreamReader(netStream);
StreamWriter writer = new StreamWriter(netStream);
writer.AutoFlush = true;
string input = string.Empty;
try
char[] receivedChars = new char[client.ReceiveBufferSize];
// LoggingProvider.Logger.Info("Buffer size: " + client.ReceiveBufferSize);
int readedChars = reader.Read(receivedChars, 0, client.ReceiveBufferSize);
char[] validChars = new char[readedChars];
Array.ConstrainedCopy(receivedChars, 0, validChars, 0, readedChars);
input = new string(validChars);
// LoggingProvider.Logger.Info("This is what the host sent to you: " + input + ". Readed chars=" + readedChars);
try
string orderResultFormat = Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\xB")) + @"MSH|^~\&|Instrument|Laboratory|LIS|LIS Facility|20120427123212+0100||ORL^O34^ORL_O34| 11|P|2.5.1||||||UNICODE UTF-8|||LAB-28^IHE" + Environment.NewLine + "MSA|AA|10" + Environment.NewLine + @"PID|||patientId||""""||19700101|M" + Environment.NewLine + "SPM|1|sampleId&ROCHE||ORH^^HL70487|||||||P^^HL70369" + Environment.NewLine + "SAC|||sampleId" + Environment.NewLine + "ORC|OK|orderId|||SC||||20120427123212" + Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\x1c\x0d"));
writer.Write(orderResultFormat);
catch (Exception e)
// LoggingProvider.Logger.Exception("Unexpected exception while writting the response", e);
client.Close();
catch (Exception ex)
//LoggingProvider.Logger.Exception("Unexpected exception while Reading the request", ex);
client.Close();
Please try it. For this error message, I suggest you could refer to this thread (http://stackoverflow.com/questions/6173763/using-windows-azure-to-use-as-a-tcp-server
) and this post (http://stackoverflow.com/a/5420788).
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

The Game Center is "unable to load data due to network connectivity issues or errors".

The Game Center is "unable to load data due to network connectivity issues or errors".
My internet is fine: all other apps that do not rely on the Game Center work, as does my browser and other online functions; additionally, a friend's iPhone connects to his Game Center perfectly while he is sitting next to me.
Closing the Game Center app and then reopening it is ineffective. Opening the options for the Game Center in the settings, logging out of my Apple ID, then logging back in, and then reopening the Game Center is ineffective. Opening the options for the Game Center in the settings, logging out of my Apple ID, then reopening the Game Center app and logging back in from there is ineffective.
This issue has gone on for more than a month, and so the phone has gone through all variations of "turn it off then back on again, refresh the system, etc etc" that are the basic first suggestions for trouble shooting.
One game app, which required a Game Center profile to launch, stopped working entirely, and would return a message saying something like "connect to the Game Center". I eventually deleted it to free up space. Other games which can be linked to the Game Center to connect with friends simply fail to link, returning "Game Center unavailable". This is the aspect that is currently bothering me the most: I cannot play games with friends unless the app can also link to Facebook and connect to friends from there.
When I open the Game Center, I see the following screen. The bubbles float gently, and it seems as if I had the ability to update my "status". However doing so results in a message that has vanished once the app is reopened.
Upon tapping Games, either the bubble from the main screen or the option on the ribbon at the bottom, the following screen appears. Clicking on Challenges shows a message that achievements must be viewed to issue a challenge. Clicking achievements results in a message that games must be connected (and from my friend's phone I know I have several apps that should appear).
Upon tapping friends, it does show me a list of suggested friends pulled from Facebook, but attempting to send a friend request results in the following screen. After accepting the error box, the "send" button for the request is grayed out and unavailable regardless of adding or deleting friends and/or an accompanying message.
In short, the Game Center is completely unresponsive for no discernible reason, and this problem began with no warning and is now long term. Though my iPhone is older (a 4s), my friend's is even older (a regular 4) and works fine.

I am having the very same problem on my iPad running ios 7. All is fine on my iPhone it opens no problem - this is running on ios 8. I wish they would fix it.

Unable to capture data from drop down list in custom added field in migo tcode at item level

Hi guys,
need bit help in resolving query related to custom added field in Tcode migo.
i have added a field in migo at item level ,in this i have used drop down list
to get data but unable to capture data from drop down list.gown through
many blogs in scn but unable to resolve.
Please help me out in this.
Thanks,
Umakant.

Hi,
U can use following code to fill the list box
write this code in PBO
In layout editor please select listbox in dropdown attribute of input field and put some fctcode attribute
TYPE-POOLS vrm.
DATA values TYPE vrm_values WITH HEADER LINE.
TABLES: <ur custom Database table>.
clear values, values[].
SELECT * FROM <ur custom Database table>.
    values-text = <TABLE FIELD TO DISPLAY IN DROPDOWN> .
    values-key = <TABLE KEY FIELD TO DISPLAY IN DROPDOWN>.
    APPEND values.
ENDSELECT.
CALL FUNCTION 'VRM_SET_VALUES'
    EXPORTING
      id              = '<SCREEN INPUT FIELD NAME>'
      values          = values[]
    EXCEPTIONS
      id_illegal_name = 1
      OTHERS          = 2.
Also please define the following before accessing the listbox value
data: <listbox input field name> type <table field name>,
        <inputfield name where text to display> type string in top include
In PAI, select the text from the table into <inputfield name where text to display> depending on value selected which will be called when enter key is pressed or any vale is selected

DropDrown unable to get data in ALV

Hi,
I'm trying to put an dropdown by key (or index) into an ALV but I'm unable to get data in the dropdown. Can someone please help me with this?
I was watching this threads on topics at the forum, but I can not solve this problem.
Copy my code.
DATA: lr_col                            TYPE REF TO cl_salv_wd_column,
             lr_dropdown                  TYPE REF TO cl_salv_wd_uie_dropdown_by_key,
             l_cmp_usage                TYPE REF TO if_wd_component_usage,
             l_alv_model                   TYPE REF TO cl_salv_wd_config_table,
             l_ref_interfacecontroller TYPE REF TO iwci_salv_wd_table.
l_cmp_usage = wd_this->wd_cpuse_doc_measure( ).
IF l_cmp_usage->has_active_component( ) IS INITIAL.
    l_cmp_usage->create_component( ).
ENDIF.
l_ref_interfacecontroller = wd_this->wd_cpifc_doc_measure( ).
l_alv_model = l_ref_interfacecontroller->get_model( ).
l_alv_model = l_ref_interfacecontroller->get_model( ).
l_alv_model->if_salv_wd_table_settings~set_read_only( abap_false ).
lr_col = l_alv_model->if_salv_wd_column_settings~get_column(
    id = 'VALEUR_DIFF' ).
CREATE OBJECT lr_dropdown
    EXPORTING
      selected_key_fieldname = 'VALEUR_DIFF '.
lr_col->set_cell_editor( lr_dropdown ).
DATA:
lo_nd_ctx_tab TYPE REF TO if_wd_context_node,
lo_ndinfo_ctx_tab TYPE REF TO if_wd_context_node_info,
lt_value_set TYPE TABLE OF wdr_context_attr_value,
ls_value_set TYPE wdr_context_attr_value.
ls_value_set-value = '01'.
ls_value_set-text = 'One'.
APPEND ls_value_set TO lt_value_set.
ls_value_set-value = '02'.
ls_value_set-text = 'Two'.
APPEND ls_value_set TO lt_value_set.
lo_nd_ctx_tab = wd_context->get_child_node( 'DOC_MEASURE' ).
lo_ndinfo_ctx_tab = lo_nd_ctx_tab->get_node_info( ).
lo_ndinfo_ctx_tab->set_attribute_value_set(
    name = 'VALEUR_DIFF' value_set = lt_value_set ).
DATA: lt_valueset TYPE TABLE OF wdr_context_attr_value,
            ls_valueset TYPE wdr_context_attr_value,
            lr_node TYPE REF TO if_wd_context_node,
            lr_nodeinfo TYPE REF TO if_wd_context_node_info.
lr_node = wd_context->get_child_node( 'DOC_MEASURE' ).
lr_nodeinfo = lr_node->get_node_info( ).
lr_nodeinfo->set_attribute_value_set(
EXPORTING
    name = 'VALEUR_DIFF'
    value_set = lt_valueset
Thanks.
Matías.

Hi,
In your code, you are trying to do set_attribute_value_set twice. If you read your code carefully, you are setting the values once using lt_value_set where you have correctly filled the values. But after this, you are again trying using lt_valueset without filling any values. This is why your previous value-list gets overwritten and you see nothing in the dropdown. Remove the following lines in your code and it will work fine.
DATA: lt_valueset TYPE TABLE OF wdr_context_attr_value,
ls_valueset TYPE wdr_context_attr_value,
lr_node TYPE REF TO if_wd_context_node,
lr_nodeinfo TYPE REF TO if_wd_context_node_info.
lr_node = wd_context->get_child_node( 'DOC_MEASURE' ).
lr_nodeinfo = lr_node->get_node_info( ).
lr_nodeinfo->set_attribute_value_set(
EXPORTING
name = 'VALEUR_DIFF'
value_set = lt_valueset
Please get back if you are facing any more issues.
Regards,
Nithya

Unable to embed data in any of the components

I have an xlf file that contains a series of charts, tables and other components with data embedded in them. As I get new data, I update the previous data. But, currently I am unable to embed data in the existing charts or any other new components that I create. I also have a backup of this file and the backup behaves in the same manner. I restored both these files to earlier versions created last week when I was able to update the embedded data. But I am still not able to make any changes.
I have another xlf file that was created 1-2 months ago and it works fine, so it seems that there is no problem with the software itself.
Any suggestions would be very helpful.

It had occurred to me that the old shutdown/restart routine can cure a multitude of problems. That's what I did and it took care of all of the problems in all my Numbers documents.

Unable to change Date Created in Metadata

Please help with my first post...
Unable to change Date Created field in Metadata.
I am a newspaper photographer sending .jpg pics with captions to my office from my iMac. They are viewed at the office on Windows PCs using SCC MediaGrid.
When changing Date Created in Metadata Invalid Format warning appears "Format should be ISO 8601 XML compliant, that is YYYY-MM-DDThh:mm[:ss][tz] (eg 2006-07-11T13:14:30-07:00)"
If 2009-09-26, for example, is entered then exported pictures opened up in Photoshop or shown on SCC MediaGrid do not display the date.
To get dates to show up I first have to open a pic in Photoshop, go to File Info, enter 26/9/09 in Date Created and Save As.
Next I have to Import this into Aperture where the Date Created shows as "20090926".
Using Lift Metadata and Stamp Metadata the date can be transferred to other pics.
Now when I export these pics the date does show up in Photoshop and SCC MediaGrid.
Can Date Created be typed straight into field in Aperture?...Very important when pics go into archive on a server.
Also if I hit Return key in a Metadata Caption, to type on the next line, both lines will appear as one with a small square in-between them when viewed on SCC MediaGrid on a Windows PC.
Thanks in anticipation.

Nick I don't generallt use the IPTC metadata, so I'm not sure I will be too much help.
What version of Aperture are you using? I tried both things and I didn't have any problems with the latest version of Aperture on my Mac.
I was able to enter a date into "Date Created" both with and without the time-zone adjustment. Can you tell us the exact string you tried to enter into the "Date Created" and exactly when you get the error? I tried to enter my time zone (eastern US) as "-5:00", but Aperture wouldn't let me enter the 5 and popped up the error message when I typed that key. I had to use "-05:00".
As for the caption, when I hit return, Aperture ends my edit. I cannot reproduce your described behavior of actually getting a new-line into the field. I suspect your problem (although I don't know how you get to your problem) is one of the following:
1) The IPTC standard doesn't tell if the software should use a Unix-style end-of-line (which is a line-feed), or a DOS/Windows style end-of-line (which is carriage-return followed by line-feed). Aperture may put in the Unix-style and your Windows programs don't know what to do with it.
2) The IPTC standard does indicate the end-of-line style, but either Aperture or your other programs don't follow it.
or
3) IPTC Metadata doesn't actually support end-of-line, so Aperture should not allow you to enter multiple lines, but it has a bug so it does allow you to do that.
Can you tell us where exactly you are editing the caption? I tried it in the inspector pane (on the left) in the "Metadata" tab, and then I hit the "IPTC" button at the bottom of the tab.
nathan

Unable to find data source null [Caused by: jdbc/Apps1DataSource not found]

Hi,
I am using OA Adapter which listens to an EBiz HRMS event, and I am encountering the following error in $Home\j2ee\oc4j_soa\log\oc4j_soa_default_group_1\oc4j\log.xml while registering the ESB service.
Error details:
<MSG_TEXT>Failed to process control event for Service "DefaultSystem.SyncWorkerPartyEbizOAAdapter" due to an error while adding the Service! Reason : oracle.tip.esb.server.common.exceptions.BusinessEventFatalException: An unhandled exception has been thrown in the ESB system. The exception reported is: "ORABPEL-12517
AdapterFrameworkImpl::endpointActivation - Endpoint Activation Error.
The Resource Adapter Oracle Applications Resource Adapter was unable to activate the endpoint oracle.tip.adapter.apps.AppsWFBesQueueDequeueActivationSpec:{MessageSelectorRule=tab.user_data.event_name = 'oracle.apps.per.api.person.update_person', QueueName=WF_BPEL_Q, Consumer=ORA_6krj2dpn70s36c1g6h1k8dhi8h, DatabaseSchema=APPS, AppsEventSchema=ANY_SCHEMA} due to the following reason: javax.resource.ResourceException: Unable to find data source null Caused by: jdbc/Apps1DataSource not found
Please correct the reported issue and redeploy the BPEL process.
     at oracle.tip.adapter.fw.jca.AdapterFrameworkImpl.endpointActivation(AdapterFrameworkImpl.java:566)
     at oracle.tip.esb.server.service.impl.inadapter.ESBActivationAgent.activateInboundJcaEndpoint(ESBActivationAgent.java:390)
     at oracle.tip.esb.server.service.impl.inadapter.ESBActivationAgent.performEndpointActivation(ESBActivationAgent.java:306)
     at oracle.tip.esb.server.service.impl.inadapter.ESBActivationAgent.activateEndpoint(ESBActivationAgent.java:236)
     at oracle.tip.esb.server.service.impl.inadapter.ESBActivationAgent.activateEndpoint(ESBActivationAgent.java:209)
     at oracle.tip.esb.server.service.impl.inadapter.InboundAdapterService.activateEndpoint(InboundAdapterService.java:177)
     at oracle.tip.esb.server.service.impl.inadapter.InboundAdapterService.activateService(InboundAdapterService.java:119)
     at oracle.tip.esb.server.service.EsbServiceFactory.activateEsbService(EsbServiceFactory.java:222)
     at oracle.tip.esb.server.service.EsbServiceFactory.addEsbService(EsbServiceFactory.java:240)
     at oracle.tip.esb.server.common.RuntimeESBSystem.addService(RuntimeESBSystem.java:211)
     at oracle.tip.esb.common.system.ServiceEventsHandler.handleCreateService(ServiceEventsHandler.java:72)
     at oracle.tip.esb.common.system.MetadataChangeListener.handleServiceEvent(MetadataChangeListener.java:136)
     at oracle.tip.esb.common.system.MetadataChangeListener.onMetadataChange(MetadataChangeListener.java:85)
     at oracle.tip.esb.common.control.ControlMessageHandler.handleMessage(ControlMessageHandler.java:115)
     at oracle.tip.esb.server.dispatch.agent.ESBWork.process(ESBWork.java:162)
     at oracle.tip.esb.server.dispatch.agent.ESBWork.run(ESBWork.java:120)
     at oracle.j2ee.connector.work.WorkWrapper.runTargetWork(WorkWrapper.java:242)
     at oracle.j2ee.connector.work.WorkWrapper.doWork(WorkWrapper.java:215)
     at oracle.j2ee.connector.work.WorkWrapper.run(WorkWrapper.java:190)
     at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:814)
     at java.lang.Thread.run(Thread.java:595)
Caused by: javax.resource.ResourceException: Unable to find data source null
     at oracle.tip.adapter.apps.AppsManagedConnectionFactory.getDataSourceConnection(AppsManagedConnectionFactory.java:411)
     at oracle.tip.adapter.apps.AppsManagedConnectionFactory.getConnection(AppsManagedConnectionFactory.java:288)
     at oracle.tip.adapter.apps.AppsManagedConnection.getConnection(AppsManagedConnection.java:85)
     at oracle.tip.adapter.apps.AppsConnection.getJdbcConnection(AppsConnection.java:70)
     at oracle_tip_adapter_apps_AppsConnection_Proxy.getJdbcConnection()
     at oracle.tip.adapter.aq.database.MessageReader.establishDBconnection(MessageReader.java:358)
     at oracle.tip.adapter.aq.database.MessageReader.<init>(MessageReader.java:265)
     at oracle.tip.adapter.aq.inbound.AQActivationSpecDequeuer.init(AQActivationSpecDequeuer.java:142)
     at oracle.tip.adapter.aq.AQEndpoint.<init>(AQEndpoint.java:99)
     at oracle.tip.adapter.aq.AQResourceAdapter.endpointActivation(AQResourceAdapter.java:73)
     at oracle.tip.adapter.apps.AppsResourceAdapter.endpointActivation(AppsResourceAdapter.java:147)
     at oracle.tip.adapter.fw.jca.AdapterFrameworkImpl.endpointActivation(AdapterFrameworkImpl.java:541)
     ... 20 more
Caused by: javax.naming.NameNotFoundException: jdbc/Apps1DataSource not found
     at com.evermind.server.rmi.RMIServerContext.lookup(RMIServerContext.java:207)
     at com.evermind.server.ApplicationContext.unprivileged_lookup(ApplicationContext.java:257)
     at com.evermind.server.ApplicationContext.lookup(ApplicationContext.java:197)
     at javax.naming.InitialContext.lookup(InitialContext.java:351)
     at oracle.tip.adapter.apps.AppsManagedConnectionFactory.getDataSourceConnection(AppsManagedConnectionFactory.java:408)
     ... 31 more
</MSG_TEXT>
I have added the connection properties in $Home\j2ee\oc4j_soa\application-deployments\defaul\oc4j-ra.xml as follows:
<connector-factory location="eis/Apps/apps1" connector-name="Oracle Applications Adapter">
     <config-property name="xADataSourceName" value="jdbc/AIADataSource"/>
     <config-property name="dataSourceName" value=""/>
     <connection-pooling use="none">
     </connection-pooling>
     <security-config use="none">
     </security-config>
</connector-factory>
Please correct me if the connection properties are wrong.
I tried AppsEventSchema with 'NO-SCHEMA' and 'ANY-SCHEMA' also.
If I use File Adapter I was able to register the ESB and instances were created successfully.
My versions:
JDEV:      10.1.3.3.0
SOA:     10.1.3.3.0
I have done a lot of research on this but in vain. Is there any patch for rectifying this error?
Help me on this issue pl.
Regards
RK

You need to check your datasource name jdbc/AIADataSource
Check out your data-sources.xml to make sure you didn't mistype it.

I seem to be unable to follow date sequences in Numbers

Similar Messages

Maybe you are looking for