I set up Airport wireless, but I miss something my network can not be found and I need connect manually every time with my ipod?
I have problems finding my connection, I configured the Airport Express Internet is ok the light is green, but always need to connect manually , when I look for my network never show??What I need change ????
Modem -> Router -> Airport -> Wireless DHCP
|
|
V
Work PC's Static Ip's
It would be a requirement that the wireless connections were on a seperate network that could not see any of the work PC's
Everything depends on the router ..
If the router offers vlan.. then you can set the airport to a different vlan than the Work computers and it will work fine.. But your setup currently is such that wireless clients behind the airport even if they get a different IP address range would still be able to access the work PC's.
Another possible method is to use secondary IP address in the router.. this is same idea as vlan really but some routers offer IP alias.. or secondary IP.. it has a number of names.. This would not fully protect the computers on the main IP address range but via firewall in the computers will effectively do so. It would be important to make sure the local firewall is setup and running.
Similar Messages
-
I am trying to update my itunes to the latest version, but it says the itunes server could not be updated and i need to connect to the internet when I amlready am connected. How do I get the latest version of itunes so i can sync my iphone with itunes without losing all my songs?
We were able to fix our machine! I just could not make sense of the error message, so we were trying non-Microsoft, non-Apple solutions.
Our Solution: Install MalWareBytes, and run a Quick Scan.
Even thought both Microsoft anti-virus and Defender were running on our Windows 8 machine, MalWareBytes found about 100 problems. As I looked over the types of problem and locations, I found several that referenced the exact directory referenced in this message. The machine had to be restarted for MalWareBytes to complete the cleaning, but iTunes installed afterwards with no problems.
Thank you MalWareBytes! -
I have just upgraded to Lightroom 5 and my pictures that were from an later version came over but read on each picture "File can not be found"
This screenshot shows which previous versions of iPhoto are compatible with Mavericks. It also indicates which versions qualify for a free upgradeto iPhoto 9.5.1 and which require a purchase:
Note 1: every day more users are reporting problems with iPhoto 8.1.2 so I've included it in the non compatible category.
Note 2: If your previous version of iPhoto was iPhoto 7 (08) or earlier you'll need to download and run the iPhoto Library Upgrader 1.1 application on the library before opening it with iPhoto 9.5.1 -
I have a old G4, I want to give to my son. It does not have a wireless card and because his room is on the second floor it is impossible to connect with a wire.
I wish to add an airport express to my airport extreme network and connect the computer and the airport express together with a cable. Is this possible?
second question:
software does not install.
I do have a network with a airport extreme and want to add the old airport express to it. I want to do this with airport software, however the software tells me the airport express is to old and i need to reinstall older software 5.6 to be precise. However installing fails, so I thought i just remove the airport software, but osx does not allow me to do that.i managed to install the older airport utility and am trying to set up a connection with an existing network, but airport utility cannot find the airport extreme AFTER it starts up again. I then went and again restored it to its factory settings and did the whole procedure again with airport utility, but again after utility tells the airport express to restart it does not come back.
-
Hi I just bought an Apple TV device i have detected the 2WIRE and entered the Product Key Password. It takes that okay the screen goes to Connecting followed by Activating below in small print it says Setting date and time but nevr leaves that screen it just clocks there for evr???
Welcome to the Apple Community.
Assuming this is not the first time you have used your Apple TV
You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
Also try restarting the router. (Also try removing it’s power cord for at least 30 seconds)
If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123. -
Trying to update itunes but getting error message bonjour.msi can not be found
Trying to update itunes but keep getting an error message ..... bonjour.msi file missing ? Anyone having this problem and if so how do you correct it?
i get the same message and am going crazy trying to fix it.mine gives me the option to search for this file, but i can't find the file.itunes then forces me to quit instalation at this point. when i try to un install itunes, it won't let me, HELP
-
The signal has been strong and effective previously and as far as i'm aware that nothing else in the house has changed. We have two apple computers, appletv, an ipad, 2 iphones, time capsule, and airport all running off the same network. If there is product, a configuration or program we can get to help diagnose and or solve any connectivity issue that would be awesome
The Powerline adapters mentioned by edex67 are your only hope if you cannot run an Ethernet cable.
Even if the home and office are on the same electrical circuit, you won't really know how well the Powerline adapters might work until you actually try them out at your location.
For that reason, it would be a good idea to understand the store's return policy before you buy. -
I recently bought a new computer becouse my old computer crashed. Now I can not sync my itunes account. I get an error when I try. It says that itunes will erase my phone content and replace with what is on the phone. I do not want to lose all my stuff so what do I do?
This is how it works.
Iphone will sync with one computer at a time. Syncing to another will erase the current content.
Copy everything from your backup copy of your old computer to your new one. -
app is redirecting me to the support page when trying to buy plan?
If you are getting a message to contact iTunes Support then you can do so via this link and ask them why the message is appearing (we are fellow users here on these forums) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
-
i do all the steps to set wirelessly my TC but when i do my network can't find it. i don't have a modem near by but i have good signal to the mac. what am i doing wrong?
Since you mention that the "modem" (which I'm guessing is a wireless router) is not close to the Time Capsule, I'm guessing a second time when I ask if you are trying to configure the Time Capsule to "join" your network using wireless only.
Is that correct? -
where do I download drivers for airport extreme.....my iPad can not be set up by he current software
I have an airport extreme with updated software(latest) and I setup an Ipad 3 on it with ios6(wirelessly). You can access the airport to update it with the utitlity app on an ios device, mac, or pc. I dont think it has anything to do with the airport software. Did you try rebooting the airport, then trying again?
Like james said, maybe more detail would help someone help you. -
Home sharing problem: I have never set up home sharing but I feel I the concept and how it works. I recently (last 2 months or so) deauthorized, first time ever, all computers with my iTunes account. I have 3 computers authorized. I am trying to set up home sharing but get iTunes says:
"Home Sharing could not be activated because this computer is not authorized for the Apple Id "#########@###.com". Would you like to authorize now?" I click "authorize" and get the next error " You cannont authorize more than 5 computers. You have already authorized 5 computers with this Apple ID. To authorize this computer you must first deauthorize one of the other computers."
Can someone help or shed more light on my problem?
Thanks,
RichardHome Sharing is designed to work on your local network not across the internet/cloud.
Stuff is accessed under the Computers column where your local iTunes library on a local computer would appear.
Home Sharing would share your iTunes content (i.e. stuff stored in itunes on the computer, not in the cloud) with AppleTV or an iPad etc on the SAME network.
AppleTV2 will not be able to see itunes content on the work computer over the internet. It's not designed to. if the work computer was on the home network it would.
iCloud is in it's infancy and is not a mature product - iTunes TV Show purchases appear on AppleTV, but currently music does not unless you are subscribed to iTunes Match. I find this rather odd to be honest, along with the inability to buy music on AppleTV2. Movies purchased in iTunes are not authorised for iCloud viewing currently either.
Maybe it has something to do with iTunes Match 'getting in the way' - i think they assume you'll use that whereas you really want to be able to access Purchased music from the cloud without subscribing to itunes Match which is overkill for some.
AC -
I have an older HP connected to the usb port of my Time Machine, and have it shared. I want to print from my iPhone on the network, but it can not be found in airport? How do I make this work?
AirPrint printers connected to the USB port of the Apple AirPort Base Station or Time Capsules are not supported with AirPrint.
Read through this for information about Airprint printers and how to use them:
http://support.apple.com/kb/ht4356 -
I have an ipad3 and wireless keyboard but for the life on me can not type a pound (GBP) symbol - can anyone help?
I would think you'd have to change the language to British English to get the pound sign. THat or turn off your wireless keyboard and get the pound sign from the on screen keyboard, then turn your wireless board back on.
-
I have a used ipad mini. I did a reset on it and I am trying to set it back up, but it is still tied to last users iTunes ID and will not let me set it up with mine. Any ideas. I tried setting it back to factory defaults with usb cable, but still no go. How do I activate ipad mini with my iTunes ID.
delete the email account and try again
Maybe you are looking for
-
Aperture wont start when I booted up this morning . There is an upgrade that it needs to install and I am being directed to log onto a hotmail account that does not exist to install it . I cant get any sense out of hotmail and the account has been de
-
How to Display PHP Output as Portlet in HTML Region using utl_http.request
I wanted to be able to parse PHP functions to add more functionality to my Page. nothing fantasy, something simple like: http://phpsysinfo.sourceforge.net/phpsysinfo-dev/?template=classic Where the realtime values are retrieved from the OS. this repr
-
Songs imported from CD not displaying in song list
I tried to import songs from three different CDs. The first and third were fine, but the second CD imported, but doesn't display the songs imported in the list of all songs, although they are playing. I tried re-importing and it asks do I want to ove
-
Using Blackberry as Wireless Router
PDaNET software can be downloaded to a Blackberry to use it as a wireless router. Does anyone know if this will work with the iPAD? You would also have to download Blackerry Desktop Support driver to the iPAD. I don't know if that is possible. Any he
-
Can I automatically generate a PDF each time I close an InDesign document?
Hello. Is there any way that I can automatically generate a PDF each time I close an InDesign document? I'd appreciate any help with this at all. Thanks a lot.