I tried downlaoding itunes on my Windows Vista and after it completes, the icon doesn't appear on my desktop. The itunes setup can be found just not the actual program.

I tried downloading itunes on my Windows Vista and after it completes, the icon doesn't appear on my desktop. When I search for the itunes under my programs, this is what shows: iTunes64Setup.

It did prompt me to run it. I apologize. I said save.
This is what happens, I run the iTunes64Setup, it downlods, says it has completed and then I click finish on the iTunes installer. After that, nothing comes up. Usually the program will start after it installs. There isn't an icon on my desktop either. When I go and search for iTunes under programs, only the iTunes64Setup appears. I am also having trouble downloading Adope Photoshop as well.

Similar Messages

HT1923 iTunes on my Windows Vista has failed to update over several weeks. Attempting uninstal/reinstall according to iTunes support page. Will not uninstall 'Apple Mobile Device Support' - goes to 99% then progress bar unwinds completely. Tried rebooting

iTunes on my Windows Vista has failed to update over several weeks. Audio will not play out. Attempting uninstal/reinstall according to iTunes support page. Will not uninstall 'Apple Mobile Device Support' - goes to 99% then progress bar unwinds completely. Tried rebooting. Any clues??

Hey petanque1,
Thanks for the question. I understand that you are experiencing issues installing iTunes for Windows. The following article outlines the error message you are receiving and a potential resolution:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Some Windows customers may experience installation issues while trying to install or open iTunes 11.1.4.
Symptoms may include:
"The program can't start because MSVCR80.dll is missing from your computer"
"iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 126)”
"Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly"
"Entry point not found: videoTracks@QTMovie@@QBE?AV?$Vector@V?$RefPtr@VQTTrack@@@***@@$0A@VCrashOnOverf low@@***@@XZ could not be located in the dynamic link library C:\Program Files(x86)\Common Files\Apple\Apple Application Support\WebKit.dll”
Resolution
Follow these steps to resolve the issue:
Check for .dll files
1. Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
2. If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
3. Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
1. Uninstall iTunes and all of its related components.
2. Reboot your computer. If you can't uninstall a piece of Apple software, try using theMicrosoft Program Install and Uninstall Utility.
3. Re-download and reinstall iTunes 11.1.4.
Thanks,
Matt M.

Windows Vista and IIS7

We are trying to install webtools on a demo laptop that is running Windows Vista and IIS7 - is that a supported platform? We are having problems with IIS.

Hi John,
Unfortunately, Webtools does not run on Vista or IIS7.

I cannot update my ipad2 to ios5. Updating through iTunes on pc Windows Vista, Error message reads "cannot connect to iPad Software Update Server. Tried resetting network settings, still not connecting. Tried updating iTunes, still not connecting.

I cannot update my ipad2 to ios5. Updating through iTunes on pc Windows Vista, Error message reads "cannot connect to iPad Software Update Server. Tried resetting network settings, still not connecting. Tried updating iTunes, still not connecting.

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
 Cheers, Tom

I'm trying to install iTunes 10.3 on my PC (windows vista) and I keep getting this message, "There is a problem with this windows package. A program required for this install to complete could not be run. Contact your support personnel or package vendor."

I'm trying to install iTunes 10.3 on my PC (windows vista) and I keep getting this message, "There is a problem with this Windows Installer Package. A program required for this install to complete could not be run. Contact your support personnel or package vendor." I accidentally removed the Bonjour service from my system a few weeks ago, but my iTunes continued to work. Now I have no iTunes and I don't know how to fix it. SOMEONE PLEASE HELP!!!!

a colleague of mine suffers from the same problem. did a quick look on the apple support pages. found many topics covering the same problem.
also saw 1 marked as correct answer... (just browse the discussion pages before you ask, this answer appearantly was sitting there from oct. 14...)
(i'm not on windows, so i can't test...)
good luck!
j.
Correct Answer by Peter Lepere on Oct 14, 2011 3:07 AM
Hi Rick,
by "repair" I mean I went to the control panel, option - programs and features, and in the list of all my installed programs I selected "Apple Software Update". On top of the screen you find the options Uinstall, Change and Repair. I clicked the repair button and that did the trick. After the repair I could uninstall the program. I also uninstalled iTunes, Apple Application Support, Apple Mobile Device Support en Bonjour, thus all Apple programs. Then I installed iTunes 10.5 again and everything went fine.
Success,
Peter

Trying to install itunes on windows vista and get the following error message:

Trying to install itunes on windows vista and get the following error message: An error occurred during the installation of assembly "Microsoft.VC80.CRT,version="8.0.50727.4053",type="win32",publicKey Token="1fc8b3b9a1e3b",process orArchitecture="x86"". Please refer to Help and Support for more information. HRESULT: 0x80070424.

A broken Windows Modules Installer then. It's a bit of an involved fix getting past it, but we've had success here with it in the past.
First, I'd strongly suggest setting up a system restore point.
Now try the Scenario III treatment from the following document:
Windows Update Error 80070424 in Vista
Head back into Windows Update and attempt to get updates again. If they still fail, this time with an 8000FFFF error code, try the following Microsoft document:
Windows Update error 8000FFFF
If you get Windows Updates flowing again, stock up on any you're behind on (restarting the PC when requested to do so). This may take some time and may have to be done in several batches, depending on how far you've fallen behind. Basically, keep going back to Windows Update until it stops offering you new updates.
After the updates have been installed, restart the PC one more time (in order to ensure that any pending installs requiring a restart have been resolved).
Now try another iTunes install. Does it go through without the 0x80070424 this time?

TS1717 On Windows Vista and tried several times to start up my iTunes, but keep getting 'application failed MSVCR80.dll error-7 (windows 126) is this an easy fix ...?

On Windows Vista and tried several times to start up my iTunes, but keep getting 'application failed MSVCR80.dll error-7 (windows 126) is this an easy fix ...?

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99442)

I am trying to reinstall iTunes on my PC (Windows Vista) and download stalls at the end and message reads "The procedure entry point kCMByteStreamNotification_AvailableLengthChanged could not be located in the dynamic link library Core Media.dll"

I am trying to reinstall iTunes on my PC (Windows Vista) and the download stops just before completion with the following message: "The procedure entry port kCMByteStreamNotification_AvailabileLengthChanged could not be located in the dynamic link library Core Media.dll" Also "error 127. Any suggestions?

Okay. Trouble at the "publishing production information" stage also suggests trouble with Apple Application Support.
Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, does iTunes launch properly now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

TS1717 i have a windows vista and i tried downloading the newest version of itunes and it said it wasnt installed correctly.How can i reinstall it because i went to apple software update and it didnt let me it told me your software is up to date and close

I have a windows vista and i tried downloading the newest version of itunes and it said it wasnt installed correctly.How can i reinstall it because i went to apple software update and it didnt let me,it told me your software is up to date and then closed on me,please help.

it said it wasnt installed correctly
What's the precise text of that error message, please? (There's a few different ones I can think of that you might be getting.)

I have windows vista and I'm receiving a runtime error message R6034 after trying to install latest update of itunes. How do I resolve this issue?

I have windows vista and I'm receiving a runtime error message R6034 after trying to install latest update of itunes. How do I resolve this issue?

The best discussion of resolving the issues is found in the user tip: https://discussions.apple.com/docs/DOC-6562

I have windows vista and can open itunes but cannot access store anymore it tries but stops like it's stuck no message comes up .I would be grateful of any help. thankyou

I have windows vista and can access my itune downloads but when I try to access the store it thinks about it and then stops - the bar is stuck halfway across. I get no message come up. Desperate to access the store but am at a loss what to do. I am a novice on the computer so an idiot's guide for me would be welcome. many thanks, regards Lesley

I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.

Windows Vista and iTunes downloads

I have a new computer with Windows Vista and downloaded iTunes on it. My previous music iTunes library works fine, but when I try to play a recently downloaded song, I get a message that I am not authorized to play it on this computer. What does that mean? I already tried reinstalling everything and it did not help. Any other ideas?
Thanks!

I suggest you post your message in the "iTunes for Windows" forum found at <http://discussions.apple.com/category.jspa?categoryID=150>. It's a more appropriate place to find answers to your question.
Good luck! bill
1 GHz Powerbook G4 Mac OS X (10.4.9)

Is it safe to upgrade to iTunes 8 on Windows Vista (32-bit)

For the last few months after iTunes 8 has been released, I've seen post after post from folks who say that the upgrade process is less than perfect and in many cases causes lower level issues on their computer post-upgrade. I have iTunes 7.7.1.11, and each time I'm prompted to upgrade to version 8, I pass it up.
Is it safe to upgrade now, or does the iTunes/Windows community still hold reservations on the success of an upgrade and it should be done more at the caution to the user to proceed at their own risk, or is it once in a blue moon that a user would run into issues upgrading to iTunes 8 while running Windows Vista?
Also have folks tried iTunes 8 on Windows 7 and do they see any more positive results from that than on Vista?
Cheers,
George

In regards to Windown 7 Beta... I upgraded iTunes yesterday to 8.0.2 (never could get the 8.0.1 installer to work, even under WinXP). So far it's not been pleasant. I plugged by 80G Classic in to sync and it didn't want to eject. Windows and iTunes were fighting over the thing. The iPod synced and tried to auto-eject, then windows said "hey! here's a removable disk! What ya want me to do with it?" I told windows to ignore it (Cancel) and iTunes started syncing the iPod again. Lather, Rinse, Repeat... I was finally able to get it timed just right to unplug it during the split second that it showed the OK to disconnect screen and all appears OK on the pod for now. I'm not too happy at this point. I do still have 8.0.0.35 on my XP install.. may end up using that and uninstalling 8.0.2 if it doesn't clear up.

I keep getting the following message every time i plug in my Iphone to Itunes on my windows vista computer Itunes was unable to load data class information from sync services. reconnect or try again later. any suggestions pls Mario

I keep getting the following message every time i plug in my Iphone3gs to Itunes on my windows vista computer
Itunes was unable to load data class information from sync services. reconnect or try again later.
any suggestions pls
Mario

The article says that I should upgrade to the latest iTunes. I am on the latest iTunes version.
If you could read just a tiny little bit further, under the "Additional Information" section immediately after that, it says:
If you are still experiencing this issue when syncing, or have not installed Xcode 4 and get this alert:
Follow the troubleshooting steps in Mac OS X v10.5, v10.6: Resetting the SyncServices folder.
If the issue is still unresolved, follow steps in Sync Services: Advanced troubleshooting for contact and calendar syncing.
Have you tried those measures?

Is iTunes compatiable with Windows Vista??

hey ppl!
is iTunes compatiable with Windows Vista??? i wanna know this if i am getting Windows Vista and if it can work on it
cheers
hosey

Hi! I have just had windows vista installed onto my PC. I backed up all my songs etc from ipod yet when I have uploaded the latest version of itunes and installed the songs onto it, my ipod is not recognised. Basically when I go to put new stuff ontomy ipod a box appears saying that I can only be synced to one itunes library at one time. Then it asks if I want to sync to this library. Obviously I say no as I dont want to lose anything anyway now my old itunes library is somewhere in the ether and I cannot import any new songs! I have tried purchasing a few songs but again it will not importto my ipod!! Im so confused! Can anyone help me please??

I tried downlaoding itunes on my Windows Vista and after it completes, the icon doesn't appear on my desktop. The itunes setup can be found just not the actual program.

Similar Messages

Maybe you are looking for