I tried partitioning my HD to install linux, the installion was not successful and now I can't boot my mac, I tried internet recovery, it was not helpfull as the disk utility cannot delete the partition I created.

I tried partitioning my HD to install linux, the installion was not successful and now I can't boot my mac, I tried internet recovery, it was not helpfull as the disk utility cannot delete the partition I created. It was only showing me an error message "EFI files are missing", I realized that it is trying to boot from the new partition I created for the installation of the linux I intended to do.

It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
http://www.adwaremedic.com/kb/baddns.php
http://www.adwaremedic.com/kb/hackedrouter.php
If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

Similar Messages

  • After installing Win7, I created an 3a. partition and now I can't boot with Win7

    After installing Win7 with success, I created an other data partition and now I can't boot with Win7 anymore. What can I do?
    Thanks!
    Vernon

    Thanks, hatter! But I´m new in the Mac World and that´s greek for me. I have no idea about what is BCDedit, GPT, EFI, etc... I went to your bookmarks and found many discursions there. I selected 5 that the subject looks useful for me (https://discussions.apple.com/thread/3543804, https://discussions.apple.com/thread/3477901,
    https://discussions.apple.com/thread/3360787, https://discussions.apple.com/thread/3354587 and https://discussions.apple.com/thread/3199099) but, as a tipical windows user, a really new mac user and a non-american (I don´t speak English well), it´s impossible to me to understand all this.
    Do you know any "how to" in this forum or i any other part of the Internet where explain step-by-step what a dummy needs to do to recover the acess to the Windows partition (my primary objective) and create an third partition (FAT32) for data acessible for both OS?
    Thank you very much!

  • Downloaded the newest version of itunes and now I can't access any of my libraries. It says The file iTunes Library.itl cannot be read because it was created by a newer version of itunes. Any help??? I have checked my entire computer!!!!!!

    Downloaded the newest version of itunes and now I can't access any of my library. It says The file iTunes Library.itl cannot be read because it was created by a newer version of iTunes. Anybody know what to do?????

    I got that Exact message...  I think I updated my version of iTunes and it worked correctly.
    Hope this helps...

  • So my daughter set a password to lock her ipod and now she can't remember it.  I tried to restore to factory settings but it still wants a password.  I tried 0000 and that doesn't work.  Any ideas what to do to?

    So my daughter set a password to lock her ipod touch and now she can't remember it.  I tried to restore to factory settings but it is still asking for a password.  I tried 0000 and that didn't work  Any ideas what to do?

    From this Apple support document: iTunes: Specific update-and-restore error messages and advanced troubleshooting
    This device is not eligible for the requested build: Also sometimes displayed as an "error 3194." If you receive this alert, update to the latest version of iTunes. Third-party security software or router security settings can also cause this issue. To resolve this, follow Troubleshooting security software issues.
    Downgrading to a previous version of iOS is not supported. If you have installed software to perform unauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. First you must uninstall the unauthorized modification software from the computer, then edit out the "gs.apple.com" redirect from the hosts file, and then restart the computer for the host file changes to take affect.  For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Troubleshooting iTunes Store on your computer, iPhone, iPad, or iPod—follow steps under the headingBlocked by configuration (Mac OS X / Windows) > Rebuild network information > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart. Also, using an older or modified .ipsw file can cause this issue. Try moving the current .ipsw file, or try restoring in a new user to ensure that iTunes downloads a new .ipsw.
    Error 3194: Resolve error 3194 by updating to the latest version of iTunes. "This device is not eligible for the requested build" in the updater logs confirms this is the root of the issue. For more Error 3194 steps see: This device is not eligible for the requested build above.
    B-rock

  • I just updated to the latest version of Firefox and now I can no longer download facebook videos with realplayer as I formerly could. How can I downgrade to my previous version of Firefox?

    Question
    I just updated to the latest version of Firefox and now I can no longer download facebook videos with realplayer as I formerly could. How can I downgrade to my previous version of Firefox?

    Many thanks b Noir
    This is a copy of ONEof the keys  in the registry I changed  as told by Apple support today. I also have changed others as instructed by GEAR  software support to manually delete GEAR drivers (that I had installed but couldn't delete some of the others  they mentioned from Windows system 32. Then some bright spark at work told me I need the Gear drivers so  I downloaded the software and installed again.
    Sorry, just this minute went to insert image  and it is giving me a message saying this sort of content  is not allowed?.
    The most recent key I altered is in: HKey _local _machine. System\class - 4D36E965-E325-11CEBFC1-08002BE10318. Upper Filter data: Upper filter NTIDrvr  SiRem GEARAspiWDN.
    The GEARsoftware info about manually deleting  GEAR drive is from:
    http://www.gearsoftware.com/wiki/index.php?title=DRIVERS:_Windows_-_Updating%2C_ removing%2C_64_bit_versions%2C_etc
    I hope you can help

  • I recently downloaded the newest version of itunes and now I can't get it to open

    I recently downloaded the newest version of itunes and now I can't get it to open

    I got that Exact message...  I think I updated my version of iTunes and it worked correctly.
    Hope this helps...

  • My nephew lost the paired Apple TV remote and now I can't pair a new one with it.  How do I unpair the lost remote without pairing another remote?

    My nephew lost the paired Apple TV remote and now I can't pair a new one with it.  How do I unpair the lost remote without pairing another remote?

    See this official Apple article on how to unpair your remote with an Apple TV.
    http://support.apple.com/kb/HT1555?viewlocale=en_US&locale=en_US
    Let us know how this works for you.
    Also, are you positive the battery in your Apple TV remote is good?
    Never hurts to check or ask.

  • I have IMac 10.7.5 Lion I use I forgot the password and I did a few fixes from the we sites, which did not work and now I can not get the computer to reboot the gray screen comes on and if a shift c I get a load bar and it goes half way and help

    I have IMac 10.7.5 Lion I use I forgot the password and I did a few fixes from web sites, which did not work and now I can not get the computer to reboot the gray screen comes on with the apple and if a shift+c, I get a load bar and it goes half way and stops, I can get into the black screen area with the hard drive info
    I did the following:   mount -uw /    rm/var/db/.AppleSetupDone    shutdown/uses/us  reboot Ok I know I should not have, but now I need help to reboot and hopefully not lose everything on the desk top, Linda Markle

    You did the wrong things. In the future it's a good idea to remember not to do something when you don't know what you are doing and what happens when you do it.
    Forgot Your Account Password
    For Lion, Mountain Lion, or Mavericks
        Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
         When the menubar appears select Terminal from the Utilities menu.
         Enter resetpassword at the prompt and press RETURN. Follow
         instructions in the dialog window that will appear.
         Or see:
           Reset a Mac OS X 10.7 Lion Password
           OS X Mountain Lion- Reset a login password,
           OS X Mavericks- Solve password problems,
           OS X Lion- Apple ID can be used to reset your user account password.

  • I was playing around with the size of my window and now I can't get it back to the standard size, any suggestions?

    I was playing aaroound with the size of my window and now I can't get it back to standard size. Any suggestions?

    If you're using Lion, you can resize by dragging from any corner, in Leopard and lower it can only be resized from the bottom right hand corner.

  • Why can't i connect to my iphone after updating to 7.1.1? i don't even get the screen that lets me login into my apple account??? plz help my phone was stolen and through help of the police i recovered it and now i can't access my phone

    why can't i connect to my iphone after updating to 7.1.1? i don't even get the screen that lets me login into my apple account??? plz help my phone was stolen and through help of the police i recovered it and now i can't access my phone

    You must have had find my iPhone on, or it was locked by your phone carrier.
    Call your our cell carrier first.
    then log on to a computer to iCloud to erase your iPhone.  
    NOW... You will be able to setup with a backup.

  • HT1338 I had to reinstall my system because I was locked out and now I can't get back any of my purchased applications, not a On my account it shows the newest software purchases. How can I get them back after reinstalling my entire system with an older d

    I have a MacBook in Japan. I had to reinstall my system using an older version of the disc that came with my computer because I was locked out and now I can't get back any of my purchased applications, not any of the software updates. On my account it shows the purchases. How can I get them back? None of the websites, such as iTunes seem to explain that...
    Thank you in advance,
    Erika

    Go to an Apple store or authorized Apple service provider.

  • Two prongs that go in to the charging part bent backwards and now it can't chage its on 20% and I need to save everything to icloud, should I turn it on?

    two prongs that go in to the charging part bent backwards and now it can't chage its on 20% and I need to save everything to icloud, should I turn it on?

    It might, but you have no other option to save your data.  And the longer you wait to do it, the weaker the battery will become, lessening the chance that you can perform a successful backup.

  • I updated to the new version of Itunes and now I can't sync my ipod or iphone.  It's not recognizing either in Itunes, but both are charging

    I updated to the new version of Itunes and now I can't sync my ipod or iphone.  It's not recognizing either in Itunes, but both are charging.  How can I get Itunes to recognize my devices (that have always been recognized until this latest software update)?

    Hi there bowlerinager75,
    Welcome to Apple Support Communities.
    The article linked below provides troubleshooting suggestions that’ll resolve most issues like the one you described, where your iOS devices are no longer recognized by iTunes on your PC.
    iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support
    Cheers,
    -Jason 

  • HT203175 I updated to the latest version of iTunes and now I can't go into the iTunes Store.  Every time I try, the program closes.  Any suggestions?

    I updated to the latest version of iTunes and now I can't go into the iTunes Store.  Every time I try, the program closes.  Any suggetions?

    Reading multiple threads here and other sites. Very frustrating without a possible solution in sight so far.

  • The code on my gift card was scratched off and now i can't use it

    the code on my gift card was scratched  off and now i can't use it

    See Here:
    https://discussions.apple.com/message/15249975#15249975

Maybe you are looking for

  • Error while processing sales order as new pricing carried out.

    "new pricing procedure carried out".iam getting this error while processing the sales order.

  • Time Capsule, Time Machine and external HD connected to time Capsule

    Hi. I am a new mac user and have an imac. I have a 1T Time capsule with an external hub connected to the time capsual. The Time caspsule creates a wireless home network which has the internet connected to it. To this external hub I have a printer con

  • Sending Map String,String data to an MXBean?

    Hi, I have been trying to figure out how to send a HashMap<String, String> from a JMX client to a remote MBean Server. I have looked into constructing the data using TabularDataSupport but can not figure out the exact syntax. I have attached the stac

  • Where is the plugin for FCP to recognize M2t. files

    this plugin was mentioned in the 6.02 update and apple says sony is responsible, and a sony rep says apple is responsible. it was "released" across the internet 2 weeks ago, but it was only a blind link? am i missing something? does anyone know here

  • USB Tethering; Camera to Xoom Tablet

    I have tethered my Xoom to my digital camera via a female to female usb connector.  USB tethering is still grayed out in my settings.  Anyone know how to get this to work so I can xfer pictures from my digital camera to my Xoom tablet?