I tried to download iOS7 to my iPhone 4, it put my phone into recovery mode and every time I try to restore it, it says it failed? HELP

I have an iPhone 4, I tried to download iOS 7 from iTunes tonight. I made sure my iTunes was up to date and everything, and while it was downloading iOS7 my screen went black and the iTunes symbol with the USB cord popped up onto it and in my iTunes tab, it said that it detected an iPhone in recovery mode and to restore/update it. I've tried it twice already, resetting my laptop twice and I don't know what to do someone please help!

I think this could help. Also, there are links to other posts for a bunch of possible soultions. I'd try this first. http://support.apple.com/kb/HT1808

Similar Messages

  • HT201210 my iphone 1st gen is stuck in recovery mode and every time i try to reinstall firmware i get an error code 1015 can anyone help please?

    my iphone 1st gen is stuck in recovery mode and every time i try to reinstall firmware i get an error code 1015 can anyone help please?

    Make sure you are using current iTunes on your computer. Click the iTunes Tab at the top of this page. Or try to Restore your iPhone with a different computer.

  • Ive tried recovery mode but every time i try to restore my ipod touch it just goes back to conect to itunes and it wont connect because i dont know the password

    ive tried re

    A Complete Guide to Restore or Recover Your iDevice (or if you forgot your passcode)
    iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    iOS- Understanding passcodes
         If you have forgotten your Restrictions code, then follow the instructions
         below but DO NOT restore any previous backup. If you do then you will
         simply be restoring the old Restrictions code you have forgotten. This
         same warning applies if you need to restore a clean system.
    If you need to restore your device or if you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
    Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
    Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
    Follow these steps to restore your device:
         1. Verify that you are using the latest version of iTunes before attempting to
             update.
         2. Connect your device to your computer.
         3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
         4. Select the Summary tab.
         5. Select the Restore option.
         6. When prompted to back up your settings before restoring, select the Back Up
             option (see in the image below). If you have just backed up the device, it is not
             necessary to create another.
         7. Select the Restore option when iTunes prompts you (as long as you've backed up,
             you should not have to worry about restoring your iOS device).
         8. When the restore process has completed, the device restarts and displays the Apple
             logo while starting up:
               After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
              to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
              iOS, keep your device connected until the "Connect to iTunes" screen goes away or
              you see "iPhone is activated."
         9. The final step is to restore your device from a previous backup.
    If you can not restore your device then you will need to go to recovery mode.
    Placing your device into recovery mode:
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
         1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
             of the cable connected to your computer's USB port.
         2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
             red slider appears, then slide the slider. Wait for the device to turn off.
              If you cannot turn off the device using the slider, press and hold the Sleep/Wake
              and Home buttons at the same time. When the device turns off, release the Sleep/Wake
              and Home buttons.
         3. While pressing and holding the Home button, reconnect the USB cable to the device.
             The device should turn on. Note: If you see the screen pictured below, let the device
             charge for at least ten minutes to ensure that the battery has some charge, and then
             start with step 2 again.
         4. Continue holding the Home button until you see the "Connect to iTunes" screen.
             When this screen appears you can release the Home button.
         5. If necessary, open iTunes. You should see the following "recovery mode" alert:
         6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Additional Information:
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

  • HT201210 Hello, I am trying to update my mother in laws I phone 3 and have ran into an error 1015.  The phone has gone into recovery mode.  Every time I try and recover it, I get the noted message. Any ideas?

    Hello, Trying to update a iPhone 3G and phone keeps going into recovery mode.  Any help?

    That error usually means that the phone was hacked or jailbroken. Was it?

  • HT1766 my iphone 4 is stuck in recovery mode and every time i go to restore it gives me a error code any ideas ????

    helllllppppppp

    Perhaps you'd like to tell us exactly what the error code is? Or would you just like us to guess?

  • After updating my Iphone 4s to os 7.1.1 ota, my phone went into recovery mode. Yet when I try to restore it with Itunes on my windows 7 laptop it says the network connection has been reset! My phone has the itunes logo and charger symbol on it .

    After updating my Iphone 4s to os 7.1.1 from 7.1 over the air, my phone went into recovery mode. Yet when I try to restore it with Itunes on my windows 7 laptop it says the network connection has been reset. Make sure your network settings are correct and your network is active, or try again later. My phone has the itunes logo and charger symbol on it, as well as an arrow pointing at the Itunes logo. After holding the sleep button down or even doing the hard reset the same screen comes up on my phone regardless of whether it is plugged in or not to my computer. I have turned my computer off and on again. It is plugged in and charging as it's battery life is very short. I also reset my modem and the same error message pops up. The only option on my computer when my phone is plugged in is to restore it. My firewall also allows Itunes through it. I have literally tried everything I know being someone who knows very little about technology. I also do not want to hear about how the update worked for other people. My phone has been in recovery mode for 5 hours at least now so it will just make me more frustrated if a bunch of people post about how the update worked for them.

    Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...
    kevinpowell1 wrote:
    how can i get it out of recovery mode?
    Make sure you have the Current Version of iTunes Installed on your computer
    iTunes free download from www.itunes.com/download
    Then See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps...
    Take your time... Pay particular attention to Steps 3 and 4.
    Some users have reported as many as 8 or 9 attempts were necessary before success.
    After you have Recovered your Device...
    Re-Sync your Content or Restore from the most recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766
    If the issue persists...
    Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
    Be sure to make an appointment first...

  • Ipad displays "ipad is disabled connect to itunes", I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?

    Ipad displays “ipad is disabled connect to itunes”, I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?
    My son let one of his friends use his ipad. The next time he tired to use it he could not get it unlocked, I tired to unlock it but it kept telling me that I had the wrong pass code. With out me knowing my son continued to tire until it completely disabled it self.

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • HT201263 i forget my passcode.now when i put my phone into recovery mode it connects to i phone software update server and sftware starts download but after much time of download error=-39 occurs

    now when i put my phone into recovery mode it connects to i phone software update server and sftware starts download but after much time of download error=-39 occurs

    my itune keep showing message that i tune is downloading software for my phone. but downloading for several minutes it displays message that i tune cannot connect to my phone because it is locked with a passcode. first entre the pass code.
    on the other hand phone is started with a message on screen phone is disabled.

  • I have a iphone 4s and its stuck at the apple logo to comes up then fades away and every time i try to restoring with iTunes it gives me a 4013 error i changed the charging port/dock and the battery ive also used a different computer and cable

    i have a iphone 4s and its stuck at the apple logo to comes up then fades away and every time i try to restoring with iTunes it gives me a 4013 error i changed the charging port/dock and the battery ive also used a different computer and cable

    See: http://support.apple.com/kb/TS3694#USB
    However, the most likely reason is your self-repair of a device that is only factory repairable broke something. Note that Apple does not sell replacement parts, so whatever parts you used were not made by Apple's supplier and are of questionable quality.

  • HT201210 my iphone 4 randomly went into recvory mode, and now when i go to restore it it says unable to restore error 9

    i just put my phone down for 2 minutes and i look back and it went into recovery mode i didnt touch nothing and last time i was using it, it was working well. so i go to restore it and i get error 9 when it goes to verify it with apple. i have tried everything changing usb cable changing computers restarting my computer, re downloading itunes. everything but nothing seems to work. side not i manged to download the ios 5.1.1 for i phone 4 and now it says the firmware might be corrput. so if anyone can help it would be greatly aprriciated. i have i phone 4. ios 5.1 its was bought less then a year ago if the helps a bit better

    I think this could help. Also, there are links to other posts for a bunch of possible soultions. I'd try this first. http://support.apple.com/kb/HT1808

  • I recently put my phone into recovery mode but it showed this "The iPhone can not be restored error(3419)."

    I put my phone into a recovery mode but it showed "The iPhone cannot be restored error (3419)." I want to restore it, but all it shows is a iTunes symbol, and an Apple cord. What do I do?! I'm really frustrated. I aside with that, I tried using TinyUmbrella, but my iPhone wont detect.. Can anyone solve this?!

    Error 1 is a very bad Hardware Error of the Baseband Chip. There is no fix. If you have Warranty or AppleCare Coverage, make Genius Reservation and take iPhone to Apple for resolution.

  • My iphone put its self into recovery mode and will not let me restore it what can i do ?

    i am really stuck my iphone does not seem to work it will not connect to itunes and i really do not know what to do it keeps telling me yo connect to itunes and restore but this is not working. i think the iphone software may be damaged but i am not sure has any one got any ideas :/ ?

    Put the phone in DFU mode (google it) and then restore.

  • HT201210 I just tried to update my iphone 5 c and its now put my phone into recovery mode

    when i connect it to the computer to restore it its making me download the update first which i dont want to do cos it takes hours,
    is there anyway out of the downloading the update at this stage and just restoring my iphone?
    Thanks

    Delete it?  My iPhone was connected to my laptop, and I said Download and Install (or whatever) from iTunes.  It downloaded it, then announced the firmware version was wrong... so I know of no intermediate file to delete.  I just tried it again, hitting the Download Only button, but I see absolutely no indication of where that file would be stored, or, now that it is (supposedly) downloaded, how I would go about installing it.  Thanks for your suggestion, though.

  • I bought an iPhone 5 yesterday and every time I try to restore my iPhone, I get error 21. I've tried numerous times and have tried things on the internet but still no luck. I have the latest iTunes update, anyone have any suggestions?

    Please help!

    Or the OP could try actually following Apple's documentation for troubleshooting and solving this very simple problem instead of uninstalling, reinstalling, installing old versions of software, etc...
    https://discussions.apple.com/docs/DOC-3141
    Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
    These errors typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
    Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.

  • I recently downloaded the newest iTunes update, but iTunes won't open... And every time I try to open iTunes, A box asks if I want to allow the program to make changes to my computer. I've clicked yes many times and it always comes up, any ideas?

    Also I've tried restarting my computer many times and it still says the same thing...

    Anyone know how I can fix this?

Maybe you are looking for

  • IOS 8.3 and file system - lost access

    Since updating to iOS 8.3 I've lost access to my iPad's file system using iFunbox and various file explorers using both PC and Mac. It seems that a sandbox is being enforced in a way that even prevents reading of files or deletion of junk files (whic

  • Removing Maxmize Option on the top right corner of the JPanel

    How to Remove the Maxmize and Minmize Option on the top right corner of the JPanel....

  • Connecting to EM, isql*plus

    hi all, after entering my isql*plus or EM URL, it dos not connnect it always replys CANT CONNECT TO SERVER or sometimes WINSOCK ERROR..... i just installed oracle 10g, i have tried reinstalling it but it is still the same. when i finshed installing i

  • Hi Mobile Sales

    Hi IAm new to SAP CRM Environment but worked on Vantive and remedy can body explain the Mobile Sales Business process how it happens in SAP CRM, and associated servers Regards Kumara Mangalum

  • Adobe flash 11.2 Help me ?

    I know how to deploy the flash msi, but my question is.. Is there a way to select "Install updates automatically when available"? Kaçak 23.Bölüm izle Currently, when you push the 11.2 update out, Kurt Seyit ve Şura 3.Bölüm izle  it defaults to 'notif