I tried to enter my printer code to the 'Add Printer' and was told it was out date. I require a

I require a new printer code as the one supplied with the printer is out of date. The number supplied with the printer is
ipdid38adiv43. I will also require a new e-mail address.

Hey acatto!
The email address should stay the same, but the code does expire after 24 hours. What you need to do to get it running again is to reprint the email information sheet. You can do this normally through the web services menu under settings. If you tell me what kind of printer you have though I'd be happy to tell you exactly where it is.
Let me know if this helps!
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

Similar Messages

  • Canon LBP6000 print driver - no printer appears in the 'add printer' section'  I have installed Mac CAPT Ve r340 and nothing shows.r

    I was having problems printing from my Canon LBP6000.  Print jobs remained held in the queue.  I uninstalled and reinstalled the Mac CAPT Ve r340 driver from Canon's website, no improvement.  The printer works fine with my Windows laptop.
    I found an option to remove all printers from the Print preferences section. I can't remember how I did this, but all printers were removed.  I reinstalled the above driver, but now in the 'print & scan' - 'add printer' section, I have no printer options.  And no idea how to get printer options.  So very open to advice.
    Thanks
    T.

    The ability to see the LBP6000 in the Add Printer view is not reliant on the printer driver but the USB cable. If you have the printers USB cable connected directly to the Mac, as opposed to having it connected to the Windows computer you mention or to some sort of USB hub, then it should appear in the Add Printer > Default view. If it does not show, then try another USB cable. You can also open System Information on the Mac and select the USB section in the left column. Then in the top right pane you will see all the USB busses on the Mac and the LBP should be seen under one of the busses if the USB cable is okay.
    With regards to the action to remove all printers, I would bet that you performed a reset of the printing system.

  • No printer appears in the add printer box even though I have downloaded the drivers

    I was trying to print and got an error message Printer is offline. All connections are in place. I downloaded the drivers for my printer but when I go to add printer, there is no printer to select

    CatherineMaryG wrote:
    I downloaded the drivers for my printer but when I go to add printer, there is no printer to select
    Did you actually install the drivers as well as repaired permissions and restarting your computer? 

  • Where can I find my proxy address and the printer code on the HP officejet 8500A Plus

    where can I find my proxy address and the printer code on the HP officejet 8500A Plus

    Hi TanaS,
    I understand that you're trying to setup ePrint.  Most users when setting up ePrint do not require entering a proxy address. 
    Are you having trouble setting up ePrint?
    Are you getting an error message when you try to setup ePrint?

  • My Character Report don't send printer codes to the printer

    Hi every one !
    I am developing an ASCII report, I made my own prt file for my printer, I defined my width ... etc.
    I want to print bold characters in the printer and configured the printers code in the report (before and after), I put the "codes" in my prt file but the printer don't print in bold. I tryed using RWRUN60 from the command line but is the same.
    I put the printer in Data Dump Mode to review all the data in the printer's buffer and what is receiving. The printer is not receiving the printers codes.
    What is grong ?
    Can Some body help me ?
    Thanks,

    Robin:
    Thanks for the tip. I tryed that and don't work.
    I did a change in the report layout and print in doble wide that i wanted in bold.
    Other issue was the "NAME" of the code, in my case, the name of the code works with numbers not with a name.
    After many, many tries, this is a copy of my prt file for my printer that works !
    printer "rdsp"
    height 22
    width 80
    before report esc "x0"
    return control(M)
    linefeed control(J)
    after page control(J) esc "@"
    code "12" esc "!1"     
    code "56" esc "!M"
    code "999" esc "@"
    !1 = doble wide+doble strike+12 cpi Master select(!) and then 49 (the
    ASCII code of character 1)
    = ESC ! 1 or 27 33 1 or 1B 21 1 or [21 1
    @ = Initialize printer
    This is the only thing that it works !!!!
    Thanks

  • Where do i get my eprint printer code on the deskjet 3050a?

    So long story short, I moved and now I cannot get my printer to work at all.  I think I finally got it back online, but I had removed it from my hpeprint.com account so now I need to re-add it but cannot find the code.  I have the Deskjet 3050a.  I'm worried about internet connectivity because I hit the eprint button and went to "print information page" hoping the code was on that, and all it does is say "downloading page" and then it never prints.

    These steps typically resolve the issue:
    1. Press the ePrint button on the printer's front-panel screen, then press "Print Info Page".
    2. Head over to the ePrintCenter website (http://www.eprintcenter.com/), and log in (or sign up for a new account if you don't have one).
    3. Click the "+Add Printer" button and enter the printer code from the ePrint info page (“Print Report” page from step 1). Create a customized ePrint email address.
    If that does not work and it never prints follow the steps below:
    1. Unplug the power cord from the back of the printer.
    2. Unplug the power cord from the back of your router (and modem, if separate from the router).
    3. Wait 20 seconds, then plug the router (and modem, if applicable) back in.
    4. Wait 30 seconds, then plug the printer back in and power it on.
    5. Press the ePrint button on the printer's front panel, and it should try to connect to Web Services again.
    Those steps usually resolve the issue, but if it still occurs you can try setting static network info for the printer (which sometimes helps to stabilize the printer's ability to get outside of your network, to the internet):
    1.  Press the network icon at the top of the printer's screen and note the IP address.
    2.  Enter the IP address into the address bar of a web browser on a computer and press enter or click the browser's go button. 
    3.  The printer status page should be opened.  Click on Network at the top.
    4.  Select Proxy Settings.
    Note:  If you are prompted for a redirect, select OK.  If you receive a certificate warning, select the option that lets you continue anyway.
    If you receive a Internal System Error, refresh the page until it loads the proxy settings.
    5.  Verify that all fields are blank.  If they are not, clear them and make sure the Proxy Server requires authentication is unchecked and click apply.  You should get a success message.
    6.  Click on IPv4 under the correct connection (wired or wireless) on the left.
    Note:  If you only see IP Address Configuration and DNS Address Configuration with a yellow note, refresh the page until it loads completely.
    8.  Leave the IP Address Configuration as Automatic IP.
    9.  Change DNS Address Configuration to Manual DNS server.
    10.  Enter 8.8.8.8 for the Manual Preferred DNS Server and 8.8.4.4 for the Manual Alternate DNS Server.
    11.  Click Apply and you should get a success message.
    12.  Power off the printer for 30 seconds and then turn it back on to force the new settings to take effect.
    If I have SOLVED your issue, please feel free to provide KUDOS and make sure you mark this thread as SOLUTION PROVIDED!
    Although I work for HP, my posts and replies are my own opinion and not those of HP.

  • No printer code for my D110a printer

    I am unable to find the printer code on my d110a printer. Wireless services are enabled on the printer. The code (email address) does not print out or show on the panel. Web services are enabled and I have no problems printing from my laptops?
    When I try to download apps. The printer indicates it cannot connect to the network??? I've tried reinstalling the printer with the same results?

    Mandybear: 
    You need to update the firmware on your printer. 
    Go to: 
    Setup>Preferences and select Product Updates...this will cause the unit to search for and download a firmware update. 
    Allow that update and you should have no problems enabling Web Services.  
    When you enable web services an info sheet will print out...go to the ePrintCenter web site, create an account, and add your printer to your account using the printer code on the left side of the info sheet.   Do that within 24 hours of the info sheet printing out.  If you do it later that 24 hours you'll need to reprint the info sheet to re-enable the printer code for adding it to your account.  
    Once you've added your printer you can configure ePrint, and add/remove/re-order, and configure print apps on your printer. 
    I am an HP employee.

  • HT2495 I have a wirless network. I connect all my computers to it and a printer. I can print wirelessly from all computers. I tried to add the printer to my new Macbook, but can't find the printer on the add printer and scan icon on preferences.

    I have a wirless network. I connect all my computers to it and a printer. I can print wirelessly from all computers. I tried to add the printer to my new Macbook, which is connecte to the network, but can't find the printer on the add printer and scan icon on preferences. I downloaded a installation printer utility from the Manufacturer (lexmark), but it didn't work. Any sugestions?
    Thanks,
    Ivette

    You would need to get the IP address of your printer then manually add a network print queue.
    To get the IP address, on the control panel of your printer, press on Setup > Network Setup > TCP/IP > View/Set IP address.

  • I am trying to save a custom code snippet in Flash CC and it does not save, any ideas why?

    I am trying to save a custom code snippet in Flash CC and it does not save, any ideas why?  I am using Windows 8.1 with Flash CC.
    I even when into the "Edit Code Snippet XML" and added a Custom folder and a custom template.  Then I went back to add the code snippet again and it still did not work.
    About line 32, I added:
       <category title="Custom"
          isBranch="true" expanded="false"
          description="Code for common interactions">
          <snippet isBranch="false">
          <title>Custom Snippet</title>
          <description>This is an example of a custom code snippet.</description>
          <requiresSymbol>true</requiresSymbol>
          <code><![CDATA[
    // Code goes here
    trace("A custom code snippet");
          ]]></code>
        </snippet>
        </category>     
    Any assistance would be greatly appreciated.

    UserAgent for the OP is - Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.3) Gecko/20100405 Namoroka/3.6.3 - he might be running a 64-bit 3rd party build.

  • I'm using the latest version of firefox, but unable to print any downloads. I've tried using the print icon on the downloaded form and also control P

    I've tried using the print icon on the downloaded form and also control P, but only get a blank page. I've even changed printers, but it didn't help. My print menu looks the same and I do not have trouble printing anything else, only with downloaded files.

    If you cannot see any content on pages you printed or in print preview, the cause might be margins which are set too high.
    #In order to check the margins, we need to go to ''File'' > ''Page Setup''.
    #Once this is done, switch to the ''Margins & Header/Footer'' tab.
    #Check what's set there under ''Margins''.
    The following are the default values for ''Margins'':
    '''Right''': 12.7
    '''Top''': 12.7
    '''Left''': 12.7
    '''Bottom''': 12.7
    Check these values accordingly and change them if necessary.

  • The Add Printer button on the eprintcenter website on my screen is not working.

    I just registerd on the eprintcenter.com site and now I am trying to click on the +Add Printer button/icon to add my printer and it is not working. I have tried it in all different web browsers and it doesn't take me anywhere on any of the browsers. Sometimes I get the "javascript&colon;void(0)" message down in the left hand bottom portion of my screen when my mouse goes over that button. What is wrong? Is it your site or my computer?

    I'm having same problem

  • Wireless MacBook Pro to wired C7280: Deleted offline printer queue, can't add printer again

    I posted about a year and a half ago about connectivity problems with our C7280 all-in-one, and PrintDoc gave me some great suggestions to get me back on line again--thanks again!
    I've had problems off-and-on again, but I've been able to get back again until now, and I can't get the usual tricks to work.
    Here's our set-up:
    Printer:  Photosmart C7280 All-in-One, connected to network via Ethernet, static IP address 192.168.1.200 (confirmed via printer's display as well as the printer's web page)
    Router:  Verizon/Actiontec MI424-WR (Verizon FiOS) with
    * Ethernet ports
    * 802.11b and 11g with WPA encryption
    My Laptop:  MacBook Pro, Mac OS 10.6.8, wireless connection
    Every now and then, the printer goes off-line.  (Our cordless phones and our WiFi occasionally hit the same channels, and our printer hiccups seem to happen after WiFi hiccups.  My theory is that a WiFi hiccup somehow screws up the print queues, possibly if it happens in the middle of a print job.  Haven't been able to prove it, though.)  I'm usually able to fix it by cycling power on the printer and/or resetting the print system (by right-clicking the list of printers in the Print & Fax window).
    That's not working this time.  I reset the print system, but when I try to add a printer, I don't see my printer in the Add Printer dialog.
    I've tried various combinations of:
    Cycling power on the printer (sometimes by cycling the power button off and on, sometimes by unplugging the power cord while powered on, and sometimes by unplugging the power cord while powered off)
    Resetting the print system again (sometimes by itself, sometimes followed by log off/on, sometimes followed by reboot)
    Powering down the Mac, then the printer, then the router, then powering them back up in reverse order.
    But I still can't see my printer in the Add Printer dialog.
    Somewhere along the way, I tried following the Mac OS 10.6-10.7 instructions from here:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02205477&cc=us&lc=en&dlc=en&product=3204785#N86...
    ...but Solution 1 assumes that the printer queue is still there; unfortunately, I'd already reset the print system by then.
    Since I'm using OS 10.6 which already has the printer drivers built in, I'm assuming that I can't uninstall and reinstall the printer drivers as in older versions of Mac OS X.  (Er, right?)
    The long-term solution (if my theory is right) is to get cordless phones that don't use the WiFi frequencies :-)  In the meantime, are there any tricks I'm missing?

    Today I tried to "add printer" again...and lo and behold, there it was!
    I wish I could tell you what fixed the problem, but I haven't got a clue. 

  • Excel is throwing error when it click print : 'No printers are installed. To install a printer click the File tab, and then click Print. Click No Printers Installed, and then click Add Printer. Follow the instructions in the Add Printer dialog box'

    Excel is throwing error when it click print : 'No printers are installed. To install a printer click the File tab, and then click Print. Click No Printers Installed, and then click Add Printer. Follow the instructions in the Add Printer dialog box'
    Word, and powerpoint application are working fine.  
    Environment :  Windows 7 64-bit, MS Office 2013 64-bit
    Steps to recreate
    (i)  Create new user account and add to any group ( do not log on using this
     account)
      (ii)  runas /user:<new user account>  <fullpath>\excel.exe
       it will ask password so enter on command prompt
    (iii)  open any excel document  and click File->Print
      (iv)  verify result  (it is failing) it pop ups below error
     Error:`Microsoft Excel
     No printers are installed. To install a printer click the File tab, and then click
     Print. Click No Printers Installed, and then click Add Printer. Follow the
     instructions in the Add Printer dialog box.                                                                                                               

    Sorry for late reply i was not at work
    I have a default set excel is still throwing error. Interestingly winword , powerpoint and publisher are working fine. I am able to print from all office applications except Excel.
     Probably excel behaves differently from other office applications.
     Probably it is a bug in excel
    Workaround : Log on to a system once using newly created account then runas excel using this account then print works fine.
    It means something in user profile should be configure to run excel print operation. Could you please somebody help what I need to configure in user profile that makes print operation success?

  • Mac OS X 10.7 drivers for HP LaserJet 1300: installation at the "Add Printer" process ended, every time, with message "Currently drivers for this printer are UNavailable..."!   PLEASE HELP?

    APPLE [see Apple Support's Article HT 3669] says Mac OS X 10.7 (Lion) has drivers for this Printer. 
    But, every time I've tried installing it to my Mac Book Pro (which came with OS X 10.7), it does recognize that the Printer (connected via USB cable) is HP LaserJet 1300 -- in fact, right below, this statement appears: "The drivers for this Printer are available...".  But, when it comes to the actual process of downloading, the "Add Printer" window -- after 20+ minutes of its "searching" for the drivers -- always ends with the message: "Currently drivers for this printer are UNavailable... contact the manufacturer."!!!  (Can you imagine? Apple says it's available... but its own "Add Printer" process says it's UNavailable!)
    I went to HP's support site, and it, too, says that drivers for this Printer are available!  -- see the 2 links:
      http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01664444&lc=en&cc=us&dlc=en &product=4152639
      http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02915680&tmp_track_link=ot_ faqs/top_issues/en_us/c02915680/loc:4&cc=us&dlc=en&lc=en&product=4152639#N507
    Can somebody help me?  Would very much appreciate it.

    You haven't installed any of the Photoshop updates for CS5.
    Go download and install the updates.

  • The only working print-related function in BioBench1.2 on my PC is the "Print Report", all the other "Print" functions gave me "Error, the printer is not set up correctly".

    I used to print all my BioBench data by first exporting them to Excel and then print from there. Recently I need to print some of the screen shots and some data directly from array analysis, but when I click on the "print" buttons, the "Error, the printer is not set up correctly" message occurs. The only thing I can print from BB without this error is the report printing function. I have a postcript printer and I have set the postscript option to be "true"... Thanks !

    This problem is a result of a limitation in Windows 9x regarding the size of an image that you can send to the printer. The problem does not occur on Windows 2000/NT. This problem appeared with the increased color options of LabVIEW 6.0 on which the BB1.2 is based.Although it is not immediately obvious, your video driver and settings play a role in printing.
    1. Try adjusting the color palette your driver uses (i.e., 256 color, high olor, true color). The error may occur only in one of these modes. Also, change the resolution (number of pixels) to represent the Screen Area; e.g., change from a 1024 x 768 display to an 800 x 600 pixel display.
    2.Certain video drivers also support "acceleration" modes. Using a non-accelerated mode often eliminates the error. For
    Windows 95/98, right-click on your My Computer icon and select "Properties" from the pop-up
    menu. On the Performance tab, click the Graphics button and change the Hardware Acceleration (e.g., if it is set to "Full", lower the setting a notch or two); for Windows 2000/NT, right-click on your Desktop and select "Properties" from the pop-up menu. On the Settings tab, click the Advanced button and go to
    Troubleshooting.
    3.In Windows, the standard VGA driver provided by the operating system is very stable. Try using this driver in place of the specific one written for your video hardware. If the error is eliminated, there is likely a problem with your vendor-provided video driver.
    4.These errors are most often fixed with the latest
    video/printer driver. Be sure to contact your hardware manufacturer and install the latest driver. An easy way to determine if your error is "driver-related" is to move your code to another machine (and hopefully a different set of drivers) and see if th
    e error persists. If the problem is printer related, try another printer.
    5.Make sure there are at least 100M avalible space in your C: drive. If not, set the virtual memory to the other drive which has larger available space.

Maybe you are looking for