I try to update and I get "a recommended security and stabllity update is available but you do not have system permissions required to install it". I am the administrator and have password - how do I deal with this?

this is my own single computer. I am the administrator and have the password,
Mac OS 10.5.8

Maybe it is better to wait with updating.
See:
* https://support.mozilla.com/forums/contributors/705144

Similar Messages

I paid for an app and after the iOS upgrade it tell me I have to pay for it again to get the fetures I had before how do I deal with this?

I paid 1.99 plus taxes for the upgrade pedometer with the talking ,daily goal etc and after the iOS up grade they want me to pay again how is that (its aids over 5,000,000 users worldwide!)

You shouldn't have to pay again, unless your AppleID has changed. I suggest contacting the app developer. If the upgrade was an in-app purchase you should be able to "restore purchases" within the app.
However, for $1.99 how much time is it worth wasting on this? I have an app that has $280 worth of in-app purchases. So for me it really made a difference. I contact the developer and he told me how to restore the purchases, no problem.

My iPad is connected to wifi,but every several minutes later,I just can not connect to webpage,then I have to shut off iPad and turn it on again,and several minutes later the same thing happens again,how can I deal with this?

Why I can not go to webpage even wifi is on?it happens every 6 minutes.......

Is it the same webpage everytime? And is it exactly 6 minutes?
If you have control over the modem and wifi router, i.e. your personal router in your home, I would powercycle your modem and router and see what happens.
1. unplug the wifi router's power cord
2. unplug the modem's power cord
3. wait 10 - 15 seconds (I usually wait about a minute)
4. plug the modem back in and wait for it to stabilize
5. plug the router back in and wait for it to stabilize
6. try to to to the web page again.
And while I am waiting for my modem to start back up and get itself connected to the internet I usually restart my iPad/iPhone. Hold the Home button and the Power button down at the same time, wait for the apple logo to appear and then wait for the device to to a restart. Very much like rebooting your PC.

HT1420 I purchased new computers twice within the same year because they old were damaged in a storm. However, I can't deauthorize/reauthorize the new computers. How do I deal with this situation.

I purchased new computers twice within the same year because they were damaged in a storm. However, I can't deauthorize/reauthorize the new computers because it has been less than a year. How do I deal with this situation?

BrianBlaze wrote:
I have 3 Computers at home, I am studying computer sciences and am constantly rerformatting my computers, installing windows and linux over and over again.... EVERYTIME I reformat I have to authorize the same computer and so it takes up one of my 5 authorized computers... Anyways after deauthorizing all my computers in september I was not aware I couldn't do it for another year (why does APPLE assume these stupid tactics prevent piracy). Anywysw I need to reach apple and have them make it so I can do it again. I had a similar problem with Playstation and when I called them they fixed it for me... even windows (which you can only have one serial per computer) made it easy because all I had to do was call them and they fixed it for me. Now I need APPLE to do the same and this is the only place I could see to actually say what is going on... I can't believe I have to do this with my iPhone... I wanted an mp3 player and a phone together and if I can't put new songs until September 20, 2012 I am going to freak out!
HELP!
Brian
Try this link: http://www.howtogeek.com/howto/23974/beginner-deauthorize-all-computers-associat ed-with-your-itunes-account/

It says that "there was a problem connecting to the server". What's wrong with this, and how can I deal with this problem?

I just got my new iPad Mini2, and when I choose "sign in with your apple ID", it says that "there was a problem connecting to the server". What's wrong with this, and how can I deal with this problem?

1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings

HT5621 I have moved permanently from the US to live in the UK. when I try to download a UK app I am often told that I cannot use a UK Apple sstore, only a US store. I need to access various UK stores how can I deal with this?

I have moved permanently from the US to live in the UK. when I try to download a UK app I am often told that I cannot use a UK Apple sstore, only a US store. I need to access various UK stores how can I deal with this?

Try here
http://support.apple.com/kb/HT1311
when you have UK Cards etc best to change as well

TS1436 I received this message twice on 2 new & separate attempts to burn a playlist to a NEW cd: "The attempt to burn a disc failed. The burn failed because of a medium write error." What is a "medium write error" and how can I deal with this?

I received this message twice on 2 new & separate attempts to burn a playlist to a NEW cd: "The attempt to burn a disc failed. The burn failed because of a medium write error." What is a "medium write error" and how can I deal with this?

Hello Pat,
The following article provides troublehsooting steps and information that can help get iTunes burning discs again.
Can't burn a CD in iTunes for Windows
http://support.apple.com/kb/TS1436
Cheers,
Allen

My iphone was disable and it say connect to itunes. but when i connect it to my computer, my computer cant detact my device. how do i deal with this situation?

hi, i have a problems. my iphone is being disable after my daughter play with it and been entering all the wrong code. so my iphone is now disable and it say connect to itunes. i already plug my iphone to my computer, how ever my computer could not detact my devic. and because of that i cant connect it to my itunes. how do i deal with this problems?

iOS: Device not recognized in iTunes for Windows

Hi apple am new user to apple i just bought i phone 4s and i set up passowrd and forgot it how and the iphone is not responding now how can i deal with this broblem please helpe

hi apple am new user to apple i just bought i phone 4s and i set up passowrd and forgot it how and the iphone is not responding now how can i deal with this broblem please helpe

iPhone User Guide (For iOS 5.1 Software)

I get a message popup saying unable to update because I do not have system permissions required when trying to go to 3.6.13 on my IMac,but I am the system administrator.

I tried updating from 3.6.12 to 3.6.13 on my IMac and get a pop up window that says Unable to update because I do not have system permissions required to update. If I download the latest version and try to replace the existing version it says "The operation can’t be completed because you don’t have permission to access some of the items." I called Apple and made sure I was the system administrator and I am. I made sure that the two other users did not have FireFox open and it still fails the same way.
Note: This problem resolved itself for some reason but I still want to thank everyone for their suggestions.

* Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
* Trash the current Firefox application to do a clean (re)install.
* Install the new version that you have downloaded.
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

After I installed ios7, I entered the wrong Apple ID. How do I replace with the correct ID?

After I installed ios7, I entered the wrong Apple ID. How do I replace with the correct ID?

OK, so all you need to do is:
Go into Settings>iTunes, tap on the Apple ID and then tap on Sign Out. Then sign back in with your new Apple ID.
Go to Settings>iCloud, scroll to the bottom and tap on Delete Account (it will ask you for a password). Try typing in the password that you think goes with that Apple ID. If that doesn't work, try your current Apple ID password. If that doesn't work, go into Manange your Apple ID and sign on with the old Apple ID and reset the password: https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/
Once you have deleted the old iCloud account, you can then go to Settings>iCloud and sign on with your current Apple ID.
Cheers,
GB

I am trying to create a ringtone, when I right click and and go to get info I can't open anything under options. Itunes is not allowing me to do anything under options including changing the start and stop times. ??

I am trying to create a ringtone, when I right click and and go to get info I can't open anything under options. Itunes is not allowing me to do anything under options including changing the start and stop times. ??

GarageBand '11 - Create an iPhone ringtone - Apple Support

How can i deal with this problem

For example, In my database, there are three records:
field : a b c
a.txt c:/a.txt adsfs
b.txt c:/b.txt asdfsf
c.txt c:/c.txt asfdsf
Now I open one file b.txt to check the database whether have the same filename,filepath, hash value.
the results display:
The file: b.txt has not been registered
The file: c://b.txt appears OK
The file: b.txt has not been registered
I want to do is to only shows the results of 'The file: c://b.txt appears OK'. I know the problem is the body of while(rs.next).
is there any best way to conform to my demand
try{
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
String url="jdbc:odbc:MD5";
Connection connection=DriverManager.getConnection(url);
Statement statement = connection.createStatement();
String sql="SELECT * FROM MD5";
ResultSet rs = statement.executeQuery(sql);
while (rs.next()) {
if (file.getName().equals(rs.getString("a")))
if (file.getPath().equals(rs.getString("b")))
if (m.equals(rs.getString("c")))
jTextArea2.append("The file: " + file.getPath() +"appears OK"+"\n");
else jTextArea2.append("The file: " + file.getPath() +"has been modified"+"\n");
else jTextArea2.append("The Path for the" + file.getName() +"has been modified"+"\n");
else jTextArea2.append("The file: " + file.getName() +"has not been registered"+"\n");
rs.close();
connection.close();
}

Why not add a WHERE clause to your statment to filter records having the name of the file in the first record. In this case you'd better use PreparedStatement and set the file name as statement parameter
Because now you loop through the entire table for a thing you can deal with at DB level.
And I agree with the others' remarks about those braces ;)
Mike

Albums with iPhoto imports have multiple versions of images. How do I deal with this?

I have been using Aperture happily for several months, and recently followed the Apple help suggestion to "Consolidate Masters." I had the impression that this would allow me to cut any awkward ties with my old iPhoto library, and use Aperture consistently with both those photos imported from iPhoto and newer images loaded directly to Aperture.
Now I notice that wherever edited iPhoto images appear in Aperture, I now have two versions of each photo: the original and an edited version. I don't mind this in the Projects/Events, but I really only want the edited versions to appear in albums. Worse yet, if I try to delete one of the "extra" images from an album, I get a scary warning message:
Are you sure you want to move the selection to the trash?
Some versions based on these master files are included in other albums.
These versions will be removed from all Albums, Books, Light Tables, Web Pages, Web Journals, Slideshows, MobileMe Albums, Flickr Albums, and Facebook Albums.
I thought that deleting from albums just removed a reference from the album, rather than removing the image from the library. Clearly I have messed up. I want to use Aperture exclusively for photo organizing and processing. I do not want extra versions of my images cluttering all my albums.
Should I recover my photo library from backup to the state prior to consolidating masters?
What then?
Should I delete my iPhoto Library? If so, how? (Delete the iPhoto Library folder in Aperture? In the Finder, delete the iPhoto Library file in the Pictures folder?)
Please help!

It never ceases to amaze me how questions on the forum are like buses, none for an hour then three come along. Not your fault but this was asked just a couple of days ago.
When your developers issue a new version you need to save a copy of the source, we just zip it up. Then you carry on editing for the next version and zip that up and go again.
Then when a change is required to an older version, you dig it up, amend it and zip it again.
Not sure how it works with source control. The above is easier and reliable, assuming you manage it tightly.
See www.grainge.org for RoboHelp and Authoring tips

How can I Deal with this 2 errors?

I'm so desperated I can't even run the HelloWorldApp, because it has this error in the interpreter (I compiled it and Zero erros):
Exception in thread "main" java.lang.NoClassDefFoundErros
and in other program I have this
Exception in thread "main" java.lang.NoSuchMethodError: detail.number () at Factorial.main
But I DO have a method named number which has been inclosed in the object detail.
Please Help Me! I'm really Frustrated (hey, you may be like me if HelloWorldApp doesn't evev runs!!!)

I'm so desperated I can't even run the HelloWorldApp,
because it has this error in the interpreter (I
compiled it and Zero erros):
Exception in thread "main"
java.lang.NoClassDefFoundErrosYou did compile your file using "javac" correct?
And you are not using "package" in your source code correct?
Once compiled you need to be in the directory where the class file is.
and in other program I have this
Exception in thread "main"
java.lang.NoSuchMethodError: detail.number () at
Factorial.main
But I DO have a method named number which has been
inclosed in the object detail.No you do not. What that error says is that at that particular point it can not find a method that matches the way you are using the method.
That could be because the method doesn't exist. Or because the signature is wrong. Or because it is private and it needs to be public. Or because it is not part of "detail" but is part of something else.

I try to update and I get "a recommended security and stabllity update is available but you do not have system permissions required to install it". I am the administrator and have password - how do I deal with this?

Similar Messages

Maybe you are looking for