I updated to ios8, and now I can't talk and have it turn into text. Instead it records my voice. How can I make it go back.
I Am not interested in recording my voice. the simple way I could just press the microphone key and talk was great. How can I go back to the old and convenie system?
There is no microphone to the bottom left, Just bottom right. And when I touch it it says "tap and hold to record and send audio." That is exactly how I do. To want my text messaging to operate.
edit. Auto corrected effed up that last sentence. That is exactly how I do not want my messaging to operate.
Similar Messages
-
I recently updated my IMac software to the latest version, now i can't see by WD back up drive in time machine. its conected to the firewire port ok and i can see it if i check firewire connections. The drive works ok on an old windows laptop. Any ideas.
leedssparky wrote:
Is it possible that i did this whilst updating the OS software whilst leaving the WD drive connected.
It's a good idea to eject and disconnect external HDs, just in case, but that shouldn't cause a problem.
Why when setting up time capsule, does it only look for WIFI drives through airport.
I think you're confusing Time Machine (the backup software) with a Time Capsule (Apple hardware combining a wireless router and HD). Unless you have a Time Capsule you want to back up to, there's no point to clicking the Set Up Time Capsule button, if that's what you mean:
I've attached the Firewire bus from system profiler, dont understand why i can see it there but not in TM.
There seems to be some sort of problem with the drive, since Disk Utility thinks it's fixed, but immediately the problem returns (per the first sample you posted).
How old is the drive?
If it's within the warranty period, you might want to contact WD or the place you bought it. -
Take My Nashille Album, Which had the right Album name and right artitsts is now "American Ride" By Tobey Keith!!! And there are many more like that!
Backup with this User Tip, restore the library to the new computer using the same tool, keep the backup up-to-date in future. Deauthorize the old computer if you no longer need to access protected content on it.
As to your issues with compilations albums select all the tracks, set the Album Artist to Various Artists and on the options tab set Part of a compilation to Yes. See Grouping tracks into albums for details.
tt2 -
where do i restore my content from? and not just my music
For general library squiffiness following an upgrade the easiest thing is to restore your last backup, but I guess if it were that simple you wouldn't be here.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2 -
Just updated my iphone. Now I can se I have two! iCloud accounts? One of them appears on my phone, and I have forgotten the password. When I try to add the other account, I get the message that this account is already added, but with the name of the first account where there is no available password. I have tried several times to reset the password, bun I don't get the information I need - I have no access to email. What can I do?
Hi, thanks for the suggestion. I have tried as you suggested, and when opening the "purchased" apps some have the icloud logo next to them, but I only have "OPEN" against "Find My iPhone". When opening it up, it goes through the same routine; needs to be updated before proceeding, and wouldn't update because I don't have IOS8.
Anything else I could try, or am I doomed!
All of your help is much appreciated, thanks -
I updated to IOS8 and now i cant find my photos of streming or "carrete"
I Updated o IOS8 and now i can't find my photos of streming and carrete
PhotoStream was deleted from iOS8
Where did photostream and Cameraroll go in iOS 8?
http://www.imore.com/yes-camera-roll-gone-ios-8-heres-where-it-went-and-why
http://www.macworld.com/article/2359708/icloud-meet-photos-whats-changing-for-yo ur-images-in-ios-8.htmlhttp://www.macworld.com/article/2359708/icloud-meet-photos-whats-changing-for-yo ur-images-in-ios-8.html
http://www.imore.com/photos-ios-8-explained -
I have just updated to Yosemite, but now I can't get the custom short-keys to work.
In Mavericks I had no problem whatsoever, but now even after googeling and restart no solution.
Does anyone have the problem? All the other shortcuts work!Hi Thomas,
I can confirm the problem you are hitting. The XML test trace does not get recognized at all, and it defaults to Eclipse's basic Open File behaviour. I am not sure if it's because the format definition is missing, or if it's because something prevents the trace type from being recognized. I will open a bug about it.
Thanks for identifying this issue!
In the meantime, if you'd like to experiment with XML analyses, you can also take a look at the example at https://github.com/tracecompass/xml-analysis-example .
Cheers,
Alex -
My employer and I both have iPhone 5. We both recently updated as recommended. Now we can no longer text each other. I can text and receive from other iPhone users. Any ideas??
Well, that didn't work since I am already using my appleID for both FaceTime and iMessage but i did see the option to send as SMS when iMessage not available. so I am now able to send to him but I don't know if he can send to me. It's a start. It is only with his phone. His wife has a Galaxy and they are both on AT&T and she can send and receive. I am on sprint. If that info helps
-
i accidentally deleted iPhoto on my mac and it says the the app was downloaded with a different apple id and now i can't get the app back without paying $14.99
Did you install it yourself are somebody else for you?
If you installed them yourself, but do not remember which AppleID you used, try all AppleIDs you might have used in turn.
If somene else set up your Mac for you, ask the person to reinstall it. If you bought the mac second hand, the previous owner needs to contact Apple to transfer the iLife apps. If that is not possible, delete the apps that you cannot update and buy them using your AppleID. -
I deleted my music through the "manage storage" section in the options to make room for the ios update awhile back. Now I can't get any music back onto my device through itunes. (I've tried restoring the device twice to no avail)
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
i have connected my iphone5 to update the ios8 sofware, now it is stuck in the plug-n screen indicating itunes. the phone is not getting recognized when logged in to itunes on the computer
Try this:
Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
Confirm that your security software and settings are allowing communication between your device and update servers.
If you still see the error message when you update or restore, contact Apple support.
copied from Resolve iOS update and restore errors -
I have updated to iOS8. Now cannot connect to BT speaker that I have been using for months. BT discovers it but will not pair. I have tried switching both off & on but nothing helps.
I am sure the BT speaker not the problem because it works fine with iOS8 on my iPad!
... And no I am not trying to connect both at once. To be sure I have switched the iPad off completely and switched the speaker off & on but still with the same failure to pair. The iPhone sees the speaker but then gives me the pairing unsuccessful message when asked to connect. -
I installed the last update to acrobat..now I can no longer start acrobat or reader
I installed the last update to acrobat..now I can no longer start acrobat or reader..How do I fix this?
What version of Acrobat and Reader under what OS?
-
I bought my iMac from someone. Everything was changed over to my name however when I try to update programs it only shows the old users apple ID and I can't update. How do I change this so I can update the applications and have everything fully under me?
The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You — not the previous owner — must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
1. You don't own another Mac.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the previous owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
2. You do own another Mac.
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can boot from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
Once booted in Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
After partitioning, quit Disk Utility and run the OS X Installer. You will need the Apple ID and password that you used to upgrade. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
3. Other issues
If you see a lock screen when trying to boot from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another authorized service provider to be unlocked. You may be asked for proof of ownership.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information. -
I currently have Leopard, and there are no longer updates for it. So I must upgrade to either Snow Leopard or Mountain Lion. Without doing so I cannot update my itunes, and my ipod is no longer compatile with my mac. How can I buy the upgrade, since I do not have access to the mac store as that comes with Snow Leopard? I went to Best Buy and they said neither Snow Leopard or Mountain Lion can be bought there.
Start by checking if you can run Snow Leopard:
Requirements for OS X 10.6 'Snow Leopard'
http://support.apple.com/kb/SP575
Whilst Apple have withdrawn Snow Leopard from their stores, you can still get it from Apple by calling 1-800-MY-APPLE (if you are in the USA) and they will supply the SL DVD for $20 for a single user, or $30 for a family pack that covers up to 5 Macs. You can also purchase the code to use to download Lion from the same number (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard), or you can purchase Mountain Lion from the App Store - if you can run that:
http://www.apple.com/osx/specs/
If you are outside the US call your national Apple Helpline:
http://support.apple.com/kb/HE57
If you're in the UK, use this number: 0871 508 4400
When you have installed it, run Software Update to download and install the latest updates for Snow Leopard.
To use iCloud you have to upgrade all the way to Mountain Lion:
http://support.apple.com/kb/HT4759
Maybe you are looking for
-
Premiere Elements freezing and closing after adding a Menu.
I have been making movies with Premiere Elements for awhile now. Ever since I started, I have had the same problem. It would hang, and eventually close on me. I then got the new version, PE8 a while back. Unfortunately, I still had the same probl
-
Some generic questions about JMF
Hi, as new to JMF, I would like to ask some generic questions about JMF from this community Though including RTP stack, JMF is only compatible to old RTP draft, RFC1889. I know that Sun stopped developing/supporting JMF. What is the alternative solut
-
How can I use javascript functions?
I want to put a custom image gallery on my Muse layout. To do that I put all my .js-files-folder in the same folder like the other html-files. Now I have to import javascript files, which you normally have to put between the <head></head> tags. <body
-
Hi Everybody, I created a planning folder, with UPSM. In there I put on Layout a automatic function. (right Button on funtion, then Attribute function and finally check options "..before to change layout". So , I want to convert that to WEB Interface
-
Trying to install Dreamweaver MX 2004. I can't activate it with the serial number.
I just got a new hard drive and I'm trying to install Dreamweaver MX 2004. I can't activate it with the serial number. I can't get through on line or by phone. I'm using the 30 day trial period but what will I do when the trial period is over?