I use noscript and when clicking on "print" on newspaper articles or links to social networks I get javascript:void(null) error and nothing happens. ???

If I am reading an article on, example, the Indy Star website, and there is a button to print, I see this javascript:void(null) error message in the lower corner and nothing happens. If I go to noscript and keep "temporarily allowing all pages" eventually it will print. The same goes with trying to put an article, again say off the Indy Star website, on my Facebook page, I get the same error and have to follow the same routine (temp allow all pages) before it finally works. Any suggestions?

Yes, if you block JavaScript by using the NoScript extension, JavaScript print buttons aren't going to work until you allow JavaScript for the particular domain that print button is for.
You should study the NoScript features and learn how to use that extension. <br />
http://noscript.net/features
It is a very powerful extension which adds a good deal of security to Firefox, but there is a steep learning curve, and when you first start using it you need to set up the whitelist for web sites that you frequently visit.

Similar Messages

  • Javascript:void(null) error on clicking OBIEE prompts

    Hi Gurus,
    I have an OBIEE application with four tabs. It was working fine earlier but now when I click on any tabs in the 1st page of the application (even the "Page options" tab in the top right corner), am getting Javascript:void(null) error in the left bottom corner of the page and nothing is happening means the page is not at all navigating. I tried by disabling the pop-up blocker also, even then am getting the same error. Can anyone provide me a solution for this. Thanks in advance.

    Hi Evgeniy,
    Thanks for your reply. But that doesnt solve my issue. I cross-verified all the .js files used in the 1st page of my OBIEE application and am sure no modifications had been done in any of the .js files. Is anything else causing this issue. Kindly help. Thanks alot.

  • I lost my ipod and i remotely locked my ipod on the computer using icloud, but when click on find my ipod it says  NO DEVICES, how can i get back to the find my ipod page??? pliz help :(

    i lost my ipod and i remotely locked my ipod on the computer using icloud, but when click on find my ipod it says  NO DEVICES, how can i get back to the find my ipod page??? pliz help

    The only way you will be able to track that iPod is if it is turned on and connected to a wifi network by the person that has it.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

  • Everytime i click on the view in itunes button/link on the itunes website so that i can download apps, nothing happens. I accendentally  clicked on the button other than open itunes and now i cant fix it

    everytime i click on the view in itunes button/link on the itunes website so that i can download apps, nothing happens. I accendentally  clicked on the button other than open itunes and now i cant fix it

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Go to Settings>iTunes and App Stores and sifnout and sign back in
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.

  • When attempting to format my new internal Hitachi 500 GB hard drive I get an I/o error and the drive is reading as a 3.4 TB drive in disk utility.  Any thoughts?

    I have a 2007 MacBook. 2 years ago I upgrade the HD to a 500 GB 7200 RPM Hitachi. That drive just failed so I purchased another from the same store. When attempting to reload the OS the drive was not showing up as an option when asked to select a destination drive for the OS. I then exited the install and opened disk utility. Disk utility lists the capacity of the drive as 3.4 TB and when attempting to partition the drive it gives an input/output error. So I tried the hard drive from my other MacBook which already has an OS on it and it works fine. I surmised that the drive was faulty and had the store exchange it for another of a different model, but same specs. Second drive is doing the exact same thing. I figured there must be something wrong internally with the logic board so I tried using my other MacBook to load the OS and it's giving me the same exact error. Now I'm wondering what the deal is. When using the original 160 GB HD that came in the machine it works fine but the brand new one doesn't work. Any thoughts?

    I have a 2007 MacBook. 2 years ago I upgrade the HD to a 500 GB 7200 RPM Hitachi. That drive just failed so I purchased another from the same store. When attempting to reload the OS the drive was not showing up as an option when asked to select a destination drive for the OS. I then exited the install and opened disk utility. Disk utility lists the capacity of the drive as 3.4 TB and when attempting to partition the drive it gives an input/output error. So I tried the hard drive from my other MacBook which already has an OS on it and it works fine. I surmised that the drive was faulty and had the store exchange it for another of a different model, but same specs. Second drive is doing the exact same thing. I figured there must be something wrong internally with the logic board so I tried using my other MacBook to load the OS and it's giving me the same exact error. Now I'm wondering what the deal is. When using the original 160 GB HD that came in the machine it works fine but the brand new one doesn't work. Any thoughts?

  • Excel is throwing error when it click print : 'No printers are installed. To install a printer click the File tab, and then click Print. Click No Printers Installed, and then click Add Printer. Follow the instructions in the Add Printer dialog box'

    Excel is throwing error when it click print : 'No printers are installed. To install a printer click the File tab, and then click Print. Click No Printers Installed, and then click Add Printer. Follow the instructions in the Add Printer dialog box'
    Word, and powerpoint application are working fine.  
    Environment :  Windows 7 64-bit, MS Office 2013 64-bit
    Steps to recreate
    (i)  Create new user account and add to any group ( do not log on using this
     account)
      (ii)  runas /user:<new user account>  <fullpath>\excel.exe
       it will ask password so enter on command prompt
    (iii)  open any excel document  and click File->Print
      (iv)  verify result  (it is failing) it pop ups below error
     Error:`Microsoft Excel
     No printers are installed. To install a printer click the File tab, and then click
     Print. Click No Printers Installed, and then click Add Printer. Follow the
     instructions in the Add Printer dialog box.                                                                                                               

    Sorry for late reply i was not at work
    I have a default set excel is still throwing error. Interestingly winword , powerpoint and publisher are working fine. I am able to print from all office applications except Excel.
     Probably excel behaves differently from other office applications.
     Probably it is a bug in excel
    Workaround : Log on to a system once using newly created account then runas excel using this account then print works fine.
    It means something in user profile should be configure to run excel print operation. Could you please somebody help what I need to configure in user profile that makes print operation success?

  • I am running LR 4.4 on a iMac with OS X (Yosemite).  Everything works in the develop module but when i get to the print module, clicl on print and the apple print dialogue box opens, and I click onn print there, the app closes.  It has now happened about

    I am running LR 4.4 on a iMac with OS X (Yosemite).  Everything works in the develop module but when i get to the print module, clicl on print and the apple print dialogue box opens, and I click onn print there, the app closes.  It has now happened about a dozen times.  I have downloaded LR 4.4 from the internet but the problem continues.

    Very Important, how much Free Space is on your Hard Drive first of all? Click on the Macintosh HD on the Desktop, then do a Get Info on it.
    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
    Do they launch OK while in Safe Mode?

  • Indesign crashes when clicking on print options

    indesign cs6 crashes when clicking on printer or page setup within the print options. OS 10.7.4

    Peter,
    Yes, I can bring up the Paragraph Styles and the Character palettes with no document open, edit the [Basic Paragraph] style to change the font family, then open a blank document, and new text boxes will use that font.
    I'm on a bit of a deadline right now, so I ended up uninstalling ID CS5 and reinstalling it.  I can now successfully bring up the Edit menu and the right-click context menu both in a blank document and in the document I was working on before.  I'm sure the problem will reappear again at some random point in the future, so I am still looking for fixes that don't involve reinstalling the app.
    BTW, I have tried exporting my work document to IDML and re-importing it, but to no avail.  I've also tried toggling Dynamic Spelling (past threads have suggested this as a possible fix), but also to no avail.
    It would be really nice if Adobe products produced some sort of crash dump or bug report when this sort of thing happens...

  • WHen I choose an album, upload a file(s), just as the file(s) is uploaded the file I have chosen disappears and I am asked to choose album again. If I ignore this and drag a file onto the sceneline, I get the "where is the file " message" and when click o

    WHen I choose an album, upload a file(s), just as the file(s) is uploaded the file I have chosen disappears and I am asked to choose album again. If I ignore this and drag a file onto the sceneline, I get the "where is the file " message" and when click on the file it is looking for I get the message "This type of file is not supported, or the required codec is not installed". I have made many little films before but always have this problem now. Any suggestions?

    Margaret
    Although we are continents apart - Australia (Perth) vs North America (US), we will not let time zones interfere with getting your Premiere Elements 8.0/8.0.1 working.
    1. The usual Premiere Elements 8 drill.
    a. Are the automatic features of Background Rendering and AutoAnalzyer turned Off?
    For Background Rendering, see Premiere Elements workspace Edit Menu/Preferences/General. For AutoAnalzyer, see Elements Organizer workspace Edit Menu/Preferences/AutoAnalyzer Options.
    b. Are you running the program from the 8.0.1 Update? If not, see Help Menu/Update?
    c. Do you have the latest version of QuickTime installed on your computer with Premiere Elements 8.0/8.0.1?
    Apple - QuickTime - Download
    2. The usual computer drill....for your Windows XP 32 bit (SP3, I presume)
    a. Is computer opitimized, defragmented, etc.
    CCleaner - PC Optimization and Cleaning - Free Download
    b. Are you running your computer from a User Account with Administrative Privileges? That is important for Premiere Elements 8 as well as for its
    required QuickTime. In addition, right click the computer desktop icon for Premiere Elements 8 and select and apply Run As Administrator.
    3. Project Specifics
    For now, import your source media into the project from the computer hard drive using the project's Get Media/Files and Folders. Leave the Elements Organizer and Albums out of the equation for now. We will circle back to it soon after we decide everything else is working as it should be.
    a. You need to set a project preset. And, that project preset should match the properties of your source media. So important to know properties of source media.
    b. When you import your source media into a project you will get a red line over its content if the project preset is not a match - either because you set the wrong one or the program does not have a match for your particular video. That red line means that you are not seeing the best possible preview of what is being played back in the Edit area monitor. To get the best possible preview, you hit the Enter key of the computer main keyboard to get a rendered Timeline (red line goes from red to green after this type of rendering). That green line over your rendered Timeline indicates that you are now getting the best possible preview. This is solely a preview thing. Longer story, but I will leave it at that for now.
    c. Check Edit Menu/Preferences/Scratch Disks to assure that those Scratch Disks are being saved to a computer hard drive location with enough free space to accept them. Make sure that you do not have pile ups of previews files, conformed audio files, and conformed video files.
    See Local Disk C\Documents and Settings\Owner\My Documents\Adobe\Premiere Elements\9.0
    Never move, delete, or rename source files after they have been imported into a project which has been saved/closed. Otherwise, nasty media disconnect problems. You have only copies of media in Premiere Elements. The originals are on the hard drive, and the project must trace back to the originals where they were at import.
    Based on the above, try to start a new project. But, let me know ahead of time what you will be importing into the project. I am looking for
    Video
    video compression
    audio compression
    frame size
    frame rate
    interlaced or progressive
    pixel aspect ratio
    If you do not know, we could try to get that type of information from knowing the brand/model/settings for the camera that recorded the video.
    Photos
    Pixel dimensions and how many photos?
    Lots and lots of details, but eventually they all mellow into one workflow that you can customize for your projects.
    Please do not hesitate to ask questions or to ask for clarification. We can go at whatever pace you feel comfortable with.
    ATR

  • Programs go not responding when clicking File - Print

    When clicking File -> Print on Word, Adobe PDF reader and Internet Explorer (but works fine in Excel) the program goes not responding, eventually the print window loads, but goes very very slow from there on, regularly hanging. On Word and IE specifically,
    a small box flashes up with a message and goes before I get a chance to read it.
    I have tried repairing Office, virus scans, CCleaner, driver updates and reinstalls for printers, disabled no windows services. Nearly everything short of reinstalling windows.
    Anyone got any ideas. This user has had a large number of problems in the past with Office.

    I sorted the issue, really strange, but all i needed to do was select a default printer from the list of network printers as one wasnt selected already. Very very strange

  • I own both Photoshop Elements and Photoshop (the original editor).  I find the elements editor to be too cumbersome to use and would just like to edit using Photoshop.  When I try to install Photoshop as a secondary editor in elements I get an error messa

    I own both Photoshop Elements and Photoshop (the original editor).  I find the elements editor to be too cumbersome to use and would just like to edit using Photoshop.  When I try to install Photoshop as a secondary editor in elements I get an error message that I don't need to this because it is already supported on the edit menu and task bar.  I can not find any way to send images to Photoshop for editing - all I can do is send them to elements editor or the premier editor.  Can someone tell me how to send them to Photoshop?  Thanks!

    Hi,
    The D810 requires Camera Raw 8.6 or later - the latest version that is compatible with Photoshop Elements 12 is Camera Raw 8.5 as far as I can see.
    You need to either buy a new version of Photoshop Elements or use the free Adobe DNG converter.
    DNG  Converter 8.8
    Win – http://www.adobe.com/support/downloads/detail.jsp?ftpID=5888
    Mac – http://www.adobe.com/support/downloads/detail.jsp?ftpID=5887
    Useful Tutorial
    http://www.youtube.com/watch?v=0bqGovpuihw
    Brian

  • HT4437 I have followed all relevant steps, my iPhone5 and apple TV are connected to the same wireless network, but I still cannot use airplay. When I choose the airplay option on my phone, the only option I get is "iPhone"

    I have followed all relevant steps, my iPhone5 and apple TV are connected to the same wireless network, but I still cannot use airplay. When I choose the airplay option on my phone, the only option I get is "iPhone"

    Welcome to the Apple Community Willy.
    Try the following steps, check whether things are working after each step where appropriate, before trying the next.
    Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
    Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
    Restart the Apple TV (Settings > General > Restart).
    Restart the Apple TV by removing ALL the cables for 30 seconds.
    Restart your router. (Also try removing it’s power cord for at least 30 seconds)
    Restart your mobile device.

  • Javascript:void(0) error after clicking buttons in my trips and expenses

    Hi All,
    I have implemented EHP2 and activated FIN_TRAVEL_1, now I am getting all the ABAP webdynpro iviews.
    BUT when i go to "my trips and expenses" and try to click any button there like; create travel request, plan, exit, etc...
    than I get the message at the bottom left of page "javascript:void(0)"
    but when i actually go tarvel and expenses-->create new - Create Travel Request than i can create a new request and same is the case with create new plan and create expense report.
    Now in none of the screen Display form does not work, even exit, cancel button do work.
    I searched for this in form and found that this might be probably due to missing roles so I gave the following roles but still the same error:
    SAP_FI_TV_ADMINISTRATOR
    SAP_FI_TV_ADVANCE_PAYER
    SAP_FI_TV_MANAGER_GENERIC
    SAP_FI_TV_TRAVEL_ASSISTANT
    SAP_FI_TV_TRAVEL_MANAGER
    SAP_FI_TV_TRAVELER
    SAP_FI_TV_WEB_APPROVER
    SAP_FI_TV_WEB_ASSISTANT
    SAP_FI_TV_WEB_POLICY_ADMIN
    SAP_FI_TV_WEB_TRAVELER
    Plz given in your responses in this regards.
    Regards,
    JJ

    Hi All,
    Sorry for the late response....was actually really busy with my ess implementation...so i thought that i would update my forum once everything is working fine...
    coming back to error:
    the issue was probably with the host name...
    explanation:
    i was accessing my portal with [http://hostname:50000/irj/portal] which usually we do in normal scenario,
    but what i found was that when i was using EHP2 for travel module the screen were designed in abap webdynpro and on clicking any of the links i use to get javascript:void(0)....
    so after doing some RnD what i found is that if i access my portal with FQDN i.e: [http://hostname.domainname.com:50000/irj/portal] that the system understands the proper script to launch...
    plz update me if my understanding is wrong....
    Thanks & Regards,
    JJ.

  • I am unable to upload the latest version of iTunes.  It worked before and when prompted uploaded the newest version.  Now I'm unable to access iTunes..."Error 7 Windows Error126.  Insufficient privileges".  What do I do?

    I am unable to upload the latest version of iTunes.  It worked before and when prompted uploaded the newest version.  Now I'm unable to access iTunes..."Error 7 Windows Error126.  Insufficient privileges".  What do I do?

    Hey thomashfrompa,
    Thanks for the question. I understand that you are experiencing issues with iTunes for Windows. The following article outlines the error message you are receiving and a potential resolution:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Some Windows customers may experience installation issues while trying to install or open iTunes 11.1.4.
    Symptoms may include:
    "The program can't start because MSVCR80.dll is missing from your computer"
    "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 126)”
    "Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly"
    "Entry point not found: videoTracks@QTMovie@@QBE?AV?$Vector@V?$RefPtr@VQTTrack@@@***@@$0A@VCrashOnOverf low@@***@@XZ could not be located in the dynamic link library C:\Program Files(x86)\Common Files\Apple\Apple Application Support\WebKit.dll”
    Resolution
    Follow these steps to resolve the issue:
    Check for .dll files
    1. Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    2. If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    3. Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    1. Uninstall iTunes and all of its related components.
    2. Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
    3. Re-download and reinstall iTunes 11.1.4.
    Thanks,
    Matt M.

  • Can the WAN port be used as LAN when AirPort Express (2nd Generation) is setup to join a wireless network?

    Can the WAN port be used as LAN when AirPort Express (2nd Generation) is setup to join a wireless network? (IE: 2 LAN ports)
    I haven't been able to get a clear answer on this. I believe the 1st generation would act as WAN/LAN depending on setting, but what happens with the 2nd generation?
    Thank you for your time.

    If the Express joins a wireless network wirelessly, in other words its WAN port isn't connected to anything, the correct way to connect a wired client to it is by using its LAN port.
    I don't know what would happen if you were to connect a wired client to its WAN port instead — it's just not supposed to be used for that purpose. It won't permanently break anything if you were to try it though. If you were, the worst that would occur is that your network would become unresponsive as packets continuously traverse its WAN port in a circular fashion, which might require that you power down your router to reset your whole network.
    If you are already using your Express's LAN port and you need another, the way to provide more ports is to purchase an inexpensive ($10 or so) switch. Connect it to the LAN port and as many other pieces of equipment as the switch's available number of ports.
    You're correct about the first generation with the single Ethernet port. It could be used in either capacity depending on its configuration.

Maybe you are looking for

  • How to delete a file from time machine without entering time machine mode ?

    Is there  a terminial hack or a third-party app  to delete a backed up file from the finder and at the same time from time machine without having to enter time machine mode, and is there a shortcut to do so ?

  • Cant charge phone ! help

    help, whilst trying to upload latest software my phone lost its charge, all i get now on the screen is 'the connector symbol on screen ie trying to connect to i tunes with white arrow ', tried different usb ports , switched of computer several times

  • Sap offline daily backup

    Hi Experts,                      I am facing one problem.yesterday i take Full NT Backup at (OS LEVEL).it will be successfully completed. Then i start the production server .the sap is work in good condition. then start sap daily backup schedule.but

  • How can i change LOGIN NAME in ipod touch to download applications...

    How can i change LOGIN NAME in ipod touch to download applications... someone log in before me to install video...

  • How to execute a query than open a popup?

    Hi, We created a custom OA module. This module has buttons on it. Those buttons generates events. Depending on each event, I should execute a query, transform the result in a xml than open a popup and pass the xml content to the jsp page that was ope