I've formatted my pc, to upgrade to 64bits and 32g of memory. I need to reinstall my softs
I've formatted my pc, to upgrade to 64bits and 32g of memory. I need to reinstall my original softwares - CS6 and Lr4 - but my serials dont't match. What to do, please?
I hope you deactivated them before you formatted you disk. You should just install them line in the past. If you had two activation for them and did not deactivate one for each product you will need Adobe Customer Support's help activating the products.
Similar Messages
-
if i upgrade to mountain lion (from lion), will i need to reinstall my windows VM? and what about my apps and other stuff? will those need to be reinstalled too?
I started off with problems about being in the wrong region and now have Plug- in Failure
I am trying to access Setanta Sports Australia which requires
Microsoft Silverlight and was already pre-installed on a Macbook Pro Retina 2.5 ghz Intel core i5 with Mountain Lion 2.8.3
I have these different PlugIns active :
file://localhost/Library/Internet%20Plug-Ins/DivXBrowserPlugin.plugin/
file://localhost/Library/Internet%20Plug-Ins/Flash%20Player.plugin/
file://localhost/Library/Internet%20Plug-Ins/JavaAppletPlugin.plugin/
file://localhost/Library/Internet%20Plug-Ins/QuickTime%20Plugin.plugin/
file://localhost/Library/Internet%20Plug-Ins/Silverlight.plugin/ -
Apple offers a download for 11.0 .5 or something but I now can't connect my iPhone with OS 7 to my computer with ver 11.0.5!!
I wished that was a warning that had been publicized before I upgraded the phone OS !!!
What do I do????Hello jocko666,
Thank you for your question. It sounds like you are trying to install iTunes 11.1 on your Windows Vista computer. Windows Vista is compatible with iTunes 11.1. You can check the other requirements here:
Windows System Requirements
PC with a 1GHz Intel or AMD processor and 512MB of RAM
Windows XP Service Pack 2 or later, 32-bit editions of Windows Vista, Windows 7, or Windows 8
64-bit editions of Windows Vista, Windows 7, or Windows 8 require the iTunes 64-bit installer
400MB of available disk space
Broadband Internet connection to use the iTunes Store
You can download the latest version of iTunes here:
Download iTunes
http://www.apple.com/itunes/download/
If you are running Windows (64-bit), you can download iTunes 11.1 from here:
iTunes 11.1 for Windows (64-bit)
http://support.apple.com/kb/DL1615
Thank you for using Apple Support Communities.
Best,
Sheila M. -
I upgraded to Yosemite and I'm told I need to buy a new printer. Any way around this?
Hello ~ I recently upgraded to Yosemite. Unfortunately, I didn't realize (didn't notice?) that, as a result, my Canon MP620 printer is no longer compatible with my Mac. I certainly don't want to buy a new printer and, with my limited use of my computer, I really don't need and update. Do I have any options? Thank you.
Geoffreygeoffreyag wrote:
Hello ~ I recently upgraded to Yosemite. Unfortunately, I didn't realize (didn't notice?) that, as a result, my Canon MP620 printer is no longer compatible with my Mac...
Do you know that it's not compatible with Yosemite because you've tried it and it doesn't work? Canon is showing software that's compatible with Mavericks, as well as some which is compatible with Yosemite, and if you haven't already installed it, you might give it a try. -
Error Message of disk not formatted when trying to upgrade to Lion
I am trying to upgrade to Lion and have received an error message stating "The disk in not formatted as Mac OS Extended (Journaled). Use disk utility to enable.
What exactly am I supposed to do in Disk Utility?
I opened it up and I wasn't sure if I am supposed to reformat? Repair? Partition? Am I supposed to be reformatting as an Extended Mac OS?
How exactly do I do that?
Basically has anyone encountered this and what steps are needed to continue from this point?Open Disk Utility.
Select the volume to enable or disable journaling on.
To enable, click the Enable Journaling button or choose Enable Journaling from the File menu.
Mac OS X: About file system journaling -
Can't open Pages '09 Document (Upgraded to Mavericks and Pages 5.0))
There is one Pages '09 file that I can not open now that I have upgraded to Mavericks and the new Pages. Of course it is an assignment that my son needs for school! When I double-click on it I get the message that the document could not be read, that it does not have a valid format. I tried opening it with the 4.3 version of Pages, but get the same result. I also tried to pull the document from the time machine, and same problem.
Any suggestions/work-arounds? I tried simply renaming the file format--no luck. Do I need to repair permissions?
I am on a 3-week old iMac 2.7 GHz Intel Core i5 with 8GB 1600 MHz DDr3, 1GB old school drive.
JimMaybe try what was suggested here:
https://discussions.apple.com/thread/5466954?tstart=0
"I had this problem with both pages and numbers so I closed all the background apps did a reset by holding down the home and power buttons and now they both work." -
I have a hdd from a late 2009 mbp. I upgraded from leopard to snow leopard to lion to mountain lion. Now I want to upgrade to a ssd. Do I need to purchase a new copy of mountain lion to go on my new ssd? If I don't, then what is the procedure to transfer mountain lion with my 4 user accounts onto the new ssd from the hdd?
I'm confused on if I can use the recovery hd on a thumb drive to install mountain lion on my ssd. Will it be pheasible with so many OS X upgrades? And then how do I get my user accounts onto the ssd from the hdd. Do I use migration assistant? Do I need to make a time machine backup first? Should I use something called Carbon Clone or something like that?
Thanks for readingIf you have a cable that connects and external HDD to the MBP, it will do. If it is something like this, an enclosure will not be needed for the swap:
An enclosure allows you to use your old HDD for storage or backup purposes. The cable will not.
Here are instructions as to how the swap can be performed using DISK UTITY. Substitute You cable for the enclosure in same:
INSTALLING A NEW HDD IN A MBP
1. Make certain that you have backed up all of your important data.
2. You will need a HDD enclosure. One with a USB connection will do. A 9 pin Firewire is better.
3. Install your new drive in the enclosure and connect it to your MBP.
4. Open DISK UTILITY>ERASE. From the left hand column drag the new drive into the 'Name' field. Make sure that the format is 'Mac OS Extended (Journaled)'. Click on the 'Erase' button.
5. Click on the 'Restore' button (on top). Drag the old drive into the 'Source' field and the new drive into the 'Destination' field. Click on the 'Restore' button on the bottom right hand corner.
Depending upon the amount of data you are transferring, this may take a couple hours or more. A Firewire will speed up the transfer. This will result in both drives having identical information on them.
6. After the data transfer has completed, you may swap the drives. Start the MBP and you have finished the installation. The initial boot may take a bit longer than you are accustomed to, but that is normal.
7. When you are satisfied that the new hard drive if functioning properly, you can erase the old drive and use it for any needs that you may have.
If there is any confusion on your part, post back.
Ciao. -
Upgrade to Lion and then to Mountain has caused me problems
After upgrading to Lion a year ago or so I developed a problem on my MB Pro that I'd never had before. (1) My Mail app starting acting funny. I'd compose an email then click send, but it would sit in the Outbox--for hours, even days. I had to login to MobileMe to send mail and to get Mail. And (2), my system would frequently crash. If I left 3-4 apps open and then went and had lunch, for example, when I came back, my system had crashed. The screen was blanked out, and I had to move the mouse, kind of use it like an eraser to erase a part of the crap in the foreground of the screen so that I could see my login, after which I would enter my password and then login. After login in I would find that all of my apps had either crased or were frozen. I thought it might be that I needed to upgrade my Memory, so I upgrade from 4 GB to 8 GB, but this didn't do any good.
So...after Mountain Lion came out, I upgraded, hoping by some miracle this might solve the problem. But no, the problem persisted. I had AppleCare and so I called Apple three times about this problem, but they couldn't solve it either, although one senion tech adviser did manage to get my Mail app working again. He went to some folder (I wish I'd noted what this folder was at the time but I didn't), found there was sever gobbly-gook or junk files inside it, and then proceeded to delete them. After this my Mail app worked OK but the other problem persisted.
A week ago I backed up everything on my MB Pro to my Time Machine BU, bought a new Mac Mini, and then used Migration Assistant to import all my data from the Time Machine BU. I was hoping for a miracle--i.e., hoping that this problem would disappear. But not only has the problem not disappeared, I now can't even use my Mail app on the new Mac Mini. It is completely disabled...plus I still get the random crashes. I am getting by using my old MB Pro. I've transfered back to my MB Pro my essential files and I am using it while I try to figure out what in the **** is going on with the original data on my Mac Mini.
Any ideas would be much appreciated.Install or Reinstall Lion/Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click on
the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on the Security button and set the Zero
Data option to one-pass. Click on the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion/Mountain Lion and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
Ever since upgrade to Mavericks I have been having problems which are too numerous to mention. I finally found a program from a UCBerkley professor called Pacifier which indicated 4000+ of 400,000+ files and folders did not install. I was unable to go further to try to fix everything because Pacifier can't find ANY Apple installers on my HD. It recommended I download the Mavericks installer without reinstalling to continue; however, after having done so (very slow connection; takes 30 hours to download) and although the installer appears in apps while downloading it disappears and NO Apple installer packages can be found on my hard drive. I tried to download Yosemite once and it indicated my system wasn't eligible for the upgrade. Its' download time was similar to Mavericks; 28+ hours.
I am using a Macbook Pro mid-2012 version OS X 10.9.5 (13F34); Processor 2.5 GHz Intel Core i5; Memory 4 GB 1600 MHz DDR3; Graphics Intel HD Graphics 4000 1024 MB.
Regardless of how many files and apps I remove my memory is being eaten up to the point I can hardly do anything at all. There are no civil words for how frustrated I am. Someone please help me.
Thanks,
JJInstall Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
This should restore the version of OS X originally pre-installed on the computer. -
I upgraded to Yosemite and computer running very slow. It is an older iMac 2009. if I cant get it running faster I will have to downgrade os or upgrade ram. Is there something else I can try? Here is scan of computer:
Problem description:
computer Very slow after upgrading to OS Yosemite
EtreCheck version: 2.0.11 (98)
Report generated November 15, 2014 at 3:50:50 PM MST
Hardware Information: ℹ️
iMac (20-inch, Early 2009) (Verified)
iMac - model: iMac9,1
1 2.66 GHz Intel Core 2 Duo CPU: 2-core
2 GB RAM Upgradeable
BANK 0/DIMM0
1 GB DDR3 1067 MHz ok
BANK 1/DIMM0
1 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce 9400 - VRAM: 256 MB
iMac 1680 x 1050
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: 4 days 4:38:8
Disk Information: ℹ️
Hitachi HDT721032SLA380 disk0 : (320.07 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 319.21 GB (201.09 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
OPTIARC DVD RW AD-5670S
USB Information: ℹ️
Apple Inc. Built-in iSight
Apple Inc. Keyboard Hub
Apple Inc. Apple Keyboard
USB Reader USB Mass Storage Device 31.67 GB
S.M.A.R.T. Status: Verified
NO NAME (disk1s1) /Volumes/NO NAME : 31.67 GB (27.49 GB free)
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Toast 11 Titanium/Spin Doctor.app
[not loaded] com.hzsystems.terminus.driver (4) Support
/Applications/Toast 11 Titanium/Toast Titanium.app
[not loaded] com.roxio.TDIXController (2.0) Support
/System/Library/Extensions
[not loaded] com.Huawei.driver.HuaweiDataCardDriver (4.0.6) Support
[not loaded] com.roxio.BluRaySupport (1.1.6) Support
[not loaded] com.sony.driver.prs (1.0.1d1) Support
Startup Items: ℹ️
HWNetMgr: Path: /Library/StartupItems/HWNetMgr
Startup items are obsolete and will not work in future versions of OS X
Problem System Launch Agents: ℹ️
[failed] com.apple.accountsd.plist
[failed] com.apple.AirPlayUIAgent.plist
[failed] com.apple.bird.plist
[failed] com.apple.CalendarAgent.plist
[failed] com.apple.CallHistoryPluginHelper.plist
[failed] com.apple.CallHistorySyncHelper.plist
[failed] com.apple.cloudd.plist
[failed] com.apple.coreservices.appleid.authentication.plist
[failed] com.apple.coreservices.uiagent.plist
[failed] com.apple.EscrowSecurityAlert.plist
[failed] com.apple.icloud.fmfd.plist
[failed] com.apple.iconservices.iconservicesagent.plist
[failed] com.apple.nsurlsessiond.plist
[failed] com.apple.pbs.plist
[failed] com.apple.pluginkit.pkd.plist
[failed] com.apple.printtool.agent.plist
[failed] com.apple.scopedbookmarkagent.xpc.plist
[failed] com.apple.secd.plist
[failed] com.apple.security.cloudkeychainproxy.plist
[failed] com.apple.spindump_agent.plist
[failed] com.apple.telephonyutilities.callservicesd.plist
Problem System Launch Daemons: ℹ️
[failed] com.apple.AssetCacheLocatorService.plist
[failed] com.apple.awdd.plist
[failed] com.apple.cache_delete.plist
[failed] com.apple.coresymbolicationd.plist
[failed] com.apple.ctkd.plist
[failed] com.apple.diagnosticd.plist
[failed] com.apple.iconservices.iconservicesagent.plist
[failed] com.apple.iconservices.iconservicesd.plist
[failed] com.apple.ifdreader.plist
[failed] com.apple.MobileFileIntegrity.plist
[failed] com.apple.nehelper.plist
[failed] com.apple.nsurlsessiond.plist
[failed] com.apple.periodic-daily.plist
[failed] com.apple.periodic-weekly.plist
[failed] com.apple.sandboxd.plist
[failed] com.apple.softwareupdate_download_service.plist
[failed] com.apple.softwareupdated.plist
[failed] com.apple.spindump.plist
[failed] com.apple.sysmond.plist
[failed] com.apple.tccd.system.plist
[failed] com.apple.wdhelper.plist
[failed] org.cups.cupsd.plist
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.adobe.AdobeCreativeCloud.plist Support
[not loaded] com.sony.ReaderLibrary.RunReaderLibrary.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.google.keystone.agent.plist Support
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
HP Registration Assistant UNKNOWN (missing value)
Reader Library Launcher ApplicationHidden (/Library/Reader Library/Reader Library Launcher.app)
HP Scheduler Application (/Library/Application Support/Hewlett-Packard/Software Update/HP Scheduler.app)
Internet Plug-ins: ℹ️
Default Browser: Version: 600 - SDK 10.10
OfficeLiveBrowserPlugin: Version: 12.3.6 Support
net.juniper.DSSafariExtensions: Version: (null) Support
AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 Support
FlashPlayer-10.6: Version: 15.0.0.223 - SDK 10.6 Support
AdobePDFViewerNPAPI: Version: 11.0.0 - SDK 10.6 Support
Silverlight: Version: 5.1.30514.0 - SDK 10.6 Support
Flash Player: Version: 15.0.0.223 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0
NP_2020Player_IKEA: Version: 5.0.94.0 - SDK 10.6 Support
AdobePDFViewer: Version: 11.0.0 - SDK 10.6 Support
User Internet Plug-ins: ℹ️
BrowserPlus_2.9.8: Version: 2.9.8 Support
fbplugin_1_0_3: Version: (null) Support
3rd Party Preference Panes: ℹ️
BrowserPlus Support
Flash Player Support
Perian Support
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
7% syncdefaultsd
0% launchservicesd
0% launchd
0% systemstatsd
0% SystemUIServer
Top Processes by Memory: ℹ️
126 MB HP_Officejet_4620_series
30 MB Finder
28 MB ScreenSaverEngine
24 MB mds
24 MB WindowServer
Virtual Memory Information: ℹ️
25 MB Free RAM
344 MB Active RAM
333 MB Inactive RAM
337 MB Wired RAM
9.71 GB Page-ins
146 MB Page-outscould the launch agents failing slow the computer or they just don't work. I mean I am willing to upgrade ram but not if there is good chance it won't change speed much. Also to downgrade is it necessary to format the hard drive?
-
Hello,
Customer has a CUCM 6.1.5 cluster which is getting upgraded to 7.1.5. currently the CUCM CDR is sent to a external system (performix) which generates required reports. I would like to know if there is any difference in the CDR output format of CUCM version 6.1.5 and 7.1.5/ its vital to confirm this prior to upgrade as the performix is managed by a different vendor.
Please advise !
ShahidYou can review the CDR documentation here to find that out, most likely there might be some changes
Maintain and Operate Guides
http://www.cisco.com/en/US/products/sw/voicesw/ps556/prod_maintenance_guides_list.html
CDR admin guides have the field definitions.
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk -
I just upgraded to Lion and switched my web page from MobileMe to Godaddy. But since upgrading to Lion a video I placed on my web page no longer shows up. instead I get "plug-in failure". That didn't happen until the Lion Upgrade what do I do?
What's the format of your video? That will give you a hint as to what plugin is failing (or missing).
If you don't know, what's the URL of your site - it shouldn't take long for someone to work out the specifics. -
Upgrade error messages and wont sync
I upgraded, as normal, and afterwards it said my computer wasn't authorized and therefore it would not sync it. i also wouldn't let me authorize it.. everytime an error message popped up. i can't do anything with my phone and its been almost a week since this started and i haven't found a solution. anyone else have any advice?
Try using the 12 digit code from the Android device, which is already connected to the Sync server, into the Desktop PC to set that device up after the format.
-
Please let me know how can I reinstall these programs once i have to format my mac book pro with OS X Mavericks?
Thank you for your reply that is most helpfull.
Best Regards
Luis Martin
No dia 17/02/2014, às 21:35, Ned Murphy <[email protected]> escreveu:
Re: I have purchased from Adobe (downloaded) the Photoshop 10 upgraded to 12 and The Lightroom 4
created by Ned Murphy in Downloading, Installing, Setting Up - View the full discussion
If you installed them by download then you will need to do the same when your machine is ready. If you upgraded to version 12 then as a minimum you will need to have the serial number from version 10 in order to confirm your eligibility for the upgrade activation. You do not need to have version 10 installed.
You can check your account online to see if there are links to download the installation files. If you cannot find them in your account, then here are links to find the trial versions elsewhere - you can activate them to full use using your serial numbers...
http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements &loc=us
Lightroom 4: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5566
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6129948#6129948
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6129948#6129948
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6129948#6129948. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Downloading, Installing, Setting Up at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0. -
I recently upgraded to Mavericks and I now cannot find under the file menu the option to "Save As" in my Numbers application. Where did it go?
In many, many apps Apple has now created a confusing array of "save as..", "export", and "duplicate" all doing essentially the same thing - saving a new copy elsewhere possibly with format changes. Drives me nuts.
But its always there.
Grant
Maybe you are looking for
-
Been working for a while with a slow workflow, I didn't feel like I needed to upgrade anything, because I always got the work done (somehow).. The file size is close to 900 MB, but there is no way I'll be able to get this project exported in a good q
-
Showing U$S / Hora in key figures values
Hi guys, I have a little question: It is possible to show as unit of measure in each value of a a key figure a description?, I mean: Generally We use: KF 100 MTS 100 HS 100 USD What I want: KF 100 U$S / Hora 100 U$S Movilización Thks! EV
-
Why is it that whenever i run my program using eclipse it works fine but whenever i export a jar file of it, it doesn't run at all? It does not even give an error message and this happens for only one specific class, all the others expoort perfectly
-
No back button function in Metalink?
Hi. Does anyone have a problem with the back button on the (Flash) Metalink? Any work-arounds for this please, other than going to the non-flash html site instead. Thank,
-
GL Balances Conversion Question
Hi, Recently I started working in oracle apps so you can consider me as a beginer.Now; I'm working on a GL Conversion project. We have balances from 2003. It has been decided that we will convert the balances from 2003-2006 and for 2007, 2008 we will