I've re-opened an InDesign CC document and the placed EPS logos now look bitmapped

I'm on Mac OS X 10.8.5. I'm used to InDesign CS3 and have had a little use of CS5.5. This is my first try of InDesign CC on a live job.
I've re-opened an InDesign CC document made last week and the placed EPS logos now look bitmapped. The same logo (used smaller) on another layer appeared OK. For the main logo, I tried to re-link them, it had no effect. Bringing them in again was no better. The EPS files are still in original folder, right beside the INDD files. I've tried to change settings in Prefs (File handling: Preview size up to 1024) and closed and re-opened INDD CC. Also, my CS4 saveback has the same fault when opened in CS5.5.
Nothing has worked, please advise cause and solution.

graphicsguyCS3 wrote:
I've tried to change settings in Prefs (File handling: Preview size up to 1024) and closed and re-opened INDD CC.
Just to note that the "Preview Size" is for viewing pages of your InDesign file in Adobe Bridge, you can choose to Preview None, 2 pages, or more pages in the settings, and choose the thumbnail size.
This is only for programs that can preview InDesign files, like Adobe Bridge.
The preference you should have changed is in the Preferences under Display performance and drag the "Vector Images" slider all the way to the right.

Similar Messages

Is there a way of opening up old PSD documents and photos on the iMac please?

Is there a way of opening up old PSD documents and photos on the iMac please?

.psd (photoshop) files should open in preview to view them and make some simple adjustments.
If you want to edit them but don't want the expense of buying Photoshop (or Elements) for your Mac, consider downloading Gimp - it's free.
http://www.gimp.org/downloads/

So I've been trying to open some Microsoft Word Documents and it says it can't be opened because PowerPC applications are no longer supported. What do I do about this?

So I've been trying to open some Microsoft Word Documents and it says it can't be opened because PowerPC applications are no longer supported. What do I do about this?

Workarounds:
1. Restore the OS X that you formerly used to run Word 2004;
2. Partition your hard drive or attach an external hard drive and install Snow Leopard (and Rosetta) so that you can "dual-boot" into Microsoft Word 2004;
3. Upgrade to Word 2011 or use an alternative program; or
4. The solution I use: Install Snow Leopard (and Rosetta) into Parallels 7 or 8:
[click on image to enlarge]
Full Snow Leopard installation instructions here:
http://forums.macrumors.com/showthread.php?t=1365439

I have just downloaded Mac OS X 10.9 and Pages 5. When I open any pre-existing document in the new Pages the format is zoomed to 125%, the headers are out of position, the margins are changes, and inserted images are also relocated. What can I do?

I have just downloaded Mac OS X 10.9 and Pages 5. When I open any pre-existing document in the new Pages the format is zoomed to 125%, the headers are out of position, the margins are changes, and inserted images are also relocated. What can I do?

Have you tried resetting the SMC ? > Resetting the System Management Controller (SMC)

Whenever i click on word or powerpoint it always brings up a recent document. I want to have the option like when i had first opened the app that gives the options of new document and the variety of different documents. how do i get it back to that?

whenever i click on word or powerpoint it always brings up a recent document. I want to have the option like when i had first opened the app that gives the options of new document and the variety of different documents. how do i get it back to that?

tbreezy wrote:
THANK U!! K ONE MORE QUICK QUESTION. HOW DO I GET RID OF THAT POP UP BOX?
Not sure, try googling "the global template normal.dotm is already open as an add-in program"

When I click on Pages I get an old document and the spinning wheel, I can't create a new doc, open another doc, or edit the one that does open, what do I do now?

I go to the Pages application and click on it, and instead of getting the normal Pages menu I get an old Pages document and the spinning wheel. I can't open the menu bar, can't create a new document, can't open another document, can't access the menu. All that happens is the spinning wheel, it's been thirty minutes now and it's still spinning

Menu > Apple > Force Quit… > Pages
Try opening Pages with the shift key held down.
To escape what is happening in Pages if you can't get at the menu, click on your Desktop then come at the Apple menu by sliding around from top right.
Peter

Relation between statistical document and the real document

How do I get relation between statistical document and the real document.
Actually I want to reverse the posted real document and then convert statistical document into real document.
Problem is that I have the Main/Sub transaction of statistical document but not of real document. So how do i link both of them.

Hello,
LFA1 is just a master data table.
To get the number of open items you refer table BSIK
To get the number of cleared items, you refer table BSAK
These two tables gives you the number of line items posted on vendors.
Hope this is informative.
Regards,
Ravi

I am trying to open PDF files from safari, but when I click on them they open in a separate window and the information is encrypted. Any ideas on how to get them to open them in Adobe? Any help please!

I am trying to open PDF files from safari, but when I click on them they open in a separate window and the information is encrypted. Any ideas on how to get them to open them in Adobe? Any help please!

The pdf is loading as html code. If you save it, it will download as :
605124.pdf.html
Change the extension to .pdf
And it opens and works perfectly, I just tested it:
Use this link to download it automatically:
http://saladeaula.estacio.br/arquivo.asp?dir=00/1020624/605124.pdf&num_seq=59828 4

My i pod is working fine till i plug it into the computer and the i tunes logo appeared now it wont go back to original stting i cant even open and browse the i tunes logo stays on.. what do i have to do

my ipod is workingfine till i plugged it into the computer and the i tunes logo stays on . wan t to open and go back to regular setting .how could i do it?

Sounds like you are in recovery mode. Try using RecBoot to kick it out of recovery. If that does not work, you may need to restore.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

Cr2 files won't open I have PS CC and the latest CR update available.

I have a Canon Rebel XS, a fairly old camera.
It writes a cr2 file and PS won't open it.
PS shows a link tat says update CR and I have the latest update available.
Running PS CC and have the latest update.
MBP OS 10.9.3 with the latest CR update.
Does anyone have an answer for this prob?
Thanks in advance!
R

cr2 files won't open I have PS CC and the latest CR update available.
I have posted a file on DropBox at: Dropbox - _MG_7302.CR2
Can anyone open it with DNG converter or Photoshop?
Neither of them work on mine.

I have just completed a long document and the Pages application quit unexpectedly. Is that it gone irretrievably?

I have just completed a long document and the Pages application quit unexpectedly. Is is lost irretrievably?

Yes, unless you've saved manually or have autosave software for it installed, which is only preloaded when using the latest Pages version on Mac OS X 10.7.
Save your work frequently.
(59502)

I was working on a word document and the computer shut down suddenly.

I was working on a word document and the computer shut down suddenly. I got a grey screen with a message that your computer shut down because of a proble. It was written in various languages. It asked me to press any key to restart. I tried to restart it but the wheel just kept going on and on. So I shut it down and I tried to restart it. But I still keepgetting the wheel under the apple symbol and nothing else.

See
About kernel panics,
Technical Note TN2063: Understanding and Debugging Kernel Panics,
Mac OS X Kernel Panic FAQ,
Resolving Kernel Panics,
How to troubleshoot a kernel panic, and
Tutorial: Avoiding and eliminating Kernel panics for more details.

Refernce between MIRO document and the customer billing document

Hi,
We have aa requirment in the third party business process. Is there any referce table between the Miro document and the customer billing document in case of third party business process other than sale orders.
Is there any other way where i can know that for this billing document this is my MIRO document number in case of third party business process. For the reportin purpose we need the information is there any table or any function module which satisfies the above requirement.
Thanks in advance.
Sunil

Hi,
As per my best knowledge there's no direct connection between "MIRO document" and billing document.
- the logistics invoice(s) (MIRO document) is (are) connected to the PO in table EKBE (PO no. in EBELN, Invoice no. in BELNR where BEWTP="Q")
- PO and SO are connected in table VBFA (SO no. in VBELV, PO no. in VBELN where VBTYP_N="V")
- SO and billing documents are connected in table VBFA (SO. no. in VBELV, Billing doc. no. in VBELN where VBTYP_N="M")
Maybe there are other solutions too.
Regards,
Csaba

Why did in the right-click menu the "open in a new tab" and the "open in a new window" -buttons change places? And can you change it back?

With the Firefox 4 RC, the "open in a new tab" and the "open in a new window" -buttons have changed places. It's quite annoying because I normally do it without even looking at it, but now it always opens in a new window instead of a new tab. Is it possible to change it back? Maybe in your own settings?

You can use the menu editor extension to rearrange menu items - https://addons.mozilla.org/firefox/addon/menu-editor

Table having the link between Clearing document and the Invoice document

pls can someone tell me the table that having the relationship between clearing document and the Invoice document.
Thanx .

Hi,
You can try with the following tables: BSE_CLR, BSEG, BSAD, BSAK.
Regards,
Svetlin

I've re-opened an InDesign CC document and the placed EPS logos now look bitmapped

Similar Messages

Maybe you are looking for