I want to Beep the user
I have a case where the user drills down into lower and lower levels of detail. When the user gets to the leaf level and they try to drill down even further I display an error message in a message list component. I would also like to make some kind of beeping noise. How do I make a beeping noise in JSC?
You definitely don't want to run Toolkit.getDefaultToolkit().beep().
That's java code, which will be run on the server! Everytime a user makes a mistake your server will beep - alerting you, not the user :)
To get the browser to beep you'll need to use javascript.
Google "javascript beep", but I think it's as easy as calling "Beep()" from javascript code.
-- Tor
http://blogs.sun.com/tor
Similar Messages
-
Hi, I have a PPC Running OSX 10.5.4 and I want to delete the User "Guest"and "Shared"Folders on my HD, they won't let me change the permissions and I keep getting errors that say the permissions should be 0 and are 501 and having files i can't delete that go on and on ad infinitum... I think it's a virus or a corruption? Can anyone tell me or help me and let me know what I'm dealing with here or wether I'm mistaken and should leave it alone?
I'd appreciate it.
Thanks,
Mattmattmakesvidiots wrote:
Hi, I have a PPC Running OSX 10.5.4 and I want to delete the User "Guest"and "Shared"Folders on my HD
Why do you want to delete those? What have you done so far to do that?
I doubt that Mac has a virus. On the other hand, your attempts to deleted those folders may have caused corruption.
Two other comments:
1) Is there a reason that Mac hasn't been updated to OS X 10.5.8?
2) You've been misled by the poor field labeling on this Web site into trying to type your entire post into the "subject" field. In the future, just put a short summary of your post into that field. -
We want to create the User Profile service in Project Service 2010. Are there any PowerShell commands that can be used to achieve this?
Thanks in advance.Hello,
See the links below for examples:
http://www.harbar.net/archive/2010/10/30/avoiding-the-default-schema-issue-when-creating-the-user-profile.aspx
http://thesharepointfarm.com/2011/03/configuring-user-profile-service-and-user-profile-synchronization-service-via-powershell/
http://blogs.msdn.com/b/rcormier/archive/2012/05/10/how-to-create-a-sharepoint-user-profile-service-application-with-powershell.aspx
I'd also review this is if it is stuck starting:
http://www.harbar.net/articles/sp2010ups2.aspx
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS -
Selling an Imac to a family member and want to delete the user
So I'm selling my 2008 iMac to my mom because I just bought a new macbook pro. I've transferred everything to my new computer and now want to delete my user account on my old one (which is the only user on the computer). I want my mom to be able to make her own account so she can customize it like any mac user should be able to do, but I don't want her to lose some of the apps and stuff that I have.
If I delete the account will It lose some of that data? I also want to take the mac off of my apple ID so that Its not taking up one of my 5 devices (I think that's how many they allow haha). I am still curious about how to do this because I want to do it correctly.
Thanks in advance for the helpWhat to do before selling or giving away your Mac
Erase the drive and install Snow Leopard from scratch:
Clean Install of Snow Leopard
1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
with your computer. Insert the disc into the optical drive and restart the computer.
After the chime press and hold down the "C" key. Release the key when you see
a small spinning gear appear below the dark gray Apple logo.
2. After the installer loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the Utilities menu.
After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
size.) Click on the Partition tab in the DU main window. Set the number of
partitions to one (1) from the Partitions drop down menu, click on Options button
and select GUID, click on OK, then set the format type to MacOS Extended
(Journaled, if supported), then click on the Apply button.
3. When the formatting has completed quit DU and return to the installer. Proceed
with the OS X installation and follow the directions included with the installer.
4. When the installation has completed your computer will Restart into the Setup
Assistant. Be sure you configure your initial admin account with the exact same
username and password that you used on your old drive. After you finish Setup
Assistant will complete the installation after which you will be running a fresh
install of OS X. You can now begin the update process by opening Software
Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1. -
Want to know the user who created conditin record for Batchaes. T-Code VCH1
Can any one help me to find out the user who created the condition record for batches T-Code VCH1
I got the answer, we need to go to strategy record slect it and next select selection criteria and environment--->change document.
It gives u the change log information for the condition record. -
I want to change the user details to my wife how is it done please
I have a first generation Ipad which is registered to me, i want to give it to my wife and register it to her can you tell me how I do this please.
Also when I try to download her Iphone games and apps from back up it just syncs all my stuff from itunes, any ideas?You need to de-register the iPad that you are going to give to your wife:
https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/258/wa/directToSignIn ?wosid=C0MakkkgHStsuDOsue85sg&localang=en_US
Change to your region, etc.
Then your wife can register on her name.
I would advise before registering to do a reset - General > Reset > Erase all content and settings. -
I have 2 iPads and want to change the user I'd on one of them so they are not the same
How do you get a new Apple ID for one of two ipads
You realize that you will not be able to share the apps that you have already purchased with the one ID on the iPad that you want to use with a new ID, don't you? Apps, music, books, movies .... All purchases are tied to the ID that was used to make the purchase.
my advice is don't do it. If there is some real compelling reason why you need to do this like you are giving the iPad to someone else, that's another story.
iTunes: How to set up an Apple ID within iTunes - Support -
Help:allow the user to select which 3 waveforms he want and plot in one graph
Hi all
I have a question and I am kind of lost. I used block diagram to generate 5 Waveform and I want to give the user the ability to pick up three waveform in plot it in one graph.
I tried to to do in formula node but as I know I can't wire it together .
can any one tell me how to fo it
thanksnever get own wrote:
thanks for ur respond
i will be generating the waveform from block diagram. my only questions how can i plot them together in one graph or chart.
lets say i have sin, triangle, square waveform and need to plot them all in one graph.
Use an array. Please look at the examples that ship with LabVIEW. They show you how to use the chart, waveform graph, and XY graph. If you turn on Context Help and place the cursor on the graph's terminal on the block diagram you will also get a short review of how to send data to the chart/graph. -
I want to prompt the user by asking, "Are you sure you want to do this?" when the user presses a switch. If the user clicks "Yes" then the switch changes state, if the user clicks "No" then the switch retains the current state. Does such a thing exist or do I have to invent it? I am new to LabVIEW.
Thanks.You can use an event structures filter event on mouse down for something like this. Pop up a dialog and invert the logic for the output and sent it to the Discard? modifier on the right side. See example for assistance.
Attachments:
Untitled 1.vi 24 KB -
Popup a message and if the user doesnt answer - do something!
Hi,
I'm trying to write a simple popup message, but I want that if the user doesnt answer (press OK) for lets say - 10 seconds, I'll make 3 beeps.
the value of the JOptionPane until the user is answering is UNINITIALIZED_VALUE but I cant get that value because the thread is waiting for the
return value from 'setVisible' method.
It means I got to start another thread that will check the value after 10 minutes?
If so, how am I doing it? Im pretty weak when it comes to play with threads. and how do I 'say' to the "stuck" thread to stop waiting for a return value?
thanks,
Michael.
by the way - thats the code Ive written for the popup-
JOptionPane pane = new JOptionPane("Message body!");
Object[] options = new String[] { "OK" };
pane.setOptions(options);
JDialog dialog = pane.createDialog(new JFrame(), "Headline");
dialog.setVisible(true);
Object obj = pane.getValue();
if (obj == JOptionPane.UNINITIALIZED_VALUE) {
// Beeping...
}Before you show the popup you can start a Swing Timer. If the Timer fires you can do whatever processing your want. If the popup is closed then you stop the timer to make sure it doesn't fire.
Read the section from the Swing tutorial on [How to Use Timers|http://java.sun.com/docs/books/tutorial/uiswing/TOC.html]. -
How to provide the user with a list of files to pick from...for downloading
hai..
I have uploaded the file succesfully.. now we need to download the file...... which has been uploaded..... for that we have implemnted the Query as..
select max(id) from APEX_APPLICATION_FILES ,here the latest uploaded record will be retrieved and shown.
Now We want to provide the user with a list of files to pick from for downloading..,Dat is he should be shown the list of files which is available from dat he has to select one file to downlaod ???
can u plz tell me how to do it....
anooHi Anoo,
Create a report using the following SQL statement:
SELECT ID,
FILENAME,
CREATED_ON
FROM APEX_APPLICATION_FILES
ORDER BY CREATED_ON DESCThere are other fields available from the table, but the above gives you a start.
Then edit the report's Report Attributes.
Edit the CREATED_ON column and pick a Number/Date Format to use for the display and Apply Changes
Edit the ID column. In the Column Link section, enter:
Link Text: <img src="#IMAGE_PREFIX#download.gif" alt="Download">
Target: URL
URL: p?n=#ID#
Apply Changes and run your report
Andy -
Getting the User Info while Invoking the Process
Hi All,
We have created few processes and are working fine.. Now we got a new request to enable the Site Minder authentication for each request. In our project the LiveCycle process is getting invoked from a Flex code via SOAP end point. Flex application is authenticating the request by reading the info from the request object sent by the Site Mider. Is there a way in LiveCycle process to read information from the browser request object? Our application is not linked with LDAP. We wanted to know the user id that was passed as part of the Site Minder authentication and use it in the rest of the services.
Thank you for your time and help..
Regards
SriniJasmin,
Thank you for your reply. What you are saying is, the Parent app which is invoking the LiveCycle process needs to read the Request object and then pass the user info to the LiveCycle process.
So we do not have a way to read the browser cookie information from the LiveCycle process. Just want to confirm..
Thanks
Srini -
How to identify the user who has created accounts,lead, Opp in portal
Hi experts,
I am working in CRM 5.0 now i want to know the user who has created a particular account, Lead, and opportunity in Portal not in GUI kindly give some inputs regarding this .
Thanks in advance
AmarHi Frederic,
Thanks for your reply.
But is there any way by which we can make it happen in PCUI.
The customer is very particular about it. They use only PCUI to create new accounts and they want a facility to view change history in PCUI Account Application itself. They are not interested to go back to GUI to know change history for that BP.
We have just checked whether any related BSP structures containing change fields are assigned to COMM_BUPA but not successful.
Kindly help with a possible solution.
Regards,
Amar -
How to add the USER who logged in discoverer desktop to the title
i want to add the user name on the title above the page body of discoverer desktop next to the &DATE and & TIME in title
Hi,
When adding to the title:
The default available on the Insert menu is the full page item list &PageItems.
However the undocumented way to add a single page item is to type &PageItemName which in this case will be the calculation item for the USER function.
For example:
Calculation TheUser defined as USER.
Place TheUser on pageitems area.
Add &TheUser to page title (does not require &PageItems to be present)
regards
John -
How to find the user belongs to ?
Hi all,
i want to find the user in which role he belongs to ? in which view we can find these information?
pls help me
Thanks
Regards,
M.Murali...Hi,
check user_role_privs or dba_role_privs
- Pavan Kumar N
Maybe you are looking for
-
I have spent hours trying to get itunes working on my laptop. The only functinoality I crave is to be able to get pictures off my iphone 5 (which has the latest ios installed.), as almost all other functinoality of itunes I find painful beyond belief
-
Two system disks, system will not boot.
I installed a "second" system on a SSD drive I just put in a mac pro. My plan was to use the stratup utility to choose the SSD as the system disk. However, upon startup, I am getting only a white screen with the twirling circle. It is as if the mac p
-
OWB Transfer Wizard - Does It Work?
Hello, I'm trying to find out how the functionality to import metadata in CWM (Common Warehouse Metamodel) format works, so I fire up the wizard from Design/Import/Bridges Hit Next to get to the Source and Target Metadata Locations screen. Now, if I
-
Bought AKG 120 USB microphone - Picks up to much background noise
How can I reduce the hum? I bought the AKG 120 USB microphone for voiceover. I used a Seinnheiser ew100 G3 before - which worked okay. But I guess a condenser microphone is even more powerful and picks up more of what I did not want. When I compare t
-
Quick question about rebuild library. Need answer ASAP
Will rebuilding the library delete all the thumbnails? Antonio