I want to connect to a Profile database using the Sanchez JDBC Driver.

I want to connect to a Profile database using the Sanchez JDBC Driver. Is that possible? Would I need to create an extension?

You can't do it directly - only those databases listed in the help under third party databases are supported.
You may well be able to write an extension to connect to an additional database, but it seems like a lot of work.

Similar Messages

How to Connect Microsoft SQL 2000 database using JDBC

Hi all..
I want to connect Microsoft SQL 2000 database using JDBC. I want from initial steps also. (about JDBC driver & its installation)
Thankz

Just checkout the SQL Server JDBC Driver Documentation at the manfacturer's site: http://msdn2.microsoft.com/en-us/data/aa937724.aspx

Connecting to a Mysql database using a ColdFusion server

can't create a mysql datasource in CF Administrator.
If I use the following datasource settings in CF
Administrator:
JDBC URL: jdbc:mysql://localhost:3306/test
Drive Class: MySQL Connector J
AND (note the emphasis) I set my local and remote folders in
my DW site local folder, remote folder and testing server folders
all to C:\CFusionMX\db\, I can connect to my mysql database in CF
Administrator.
However, with these DW site folder settings, DW doesn't
recognize any databases (Access or Mysql) at all.
When I change my DW site folder settings to 'wwwroot'
(e.g.local folder C:\CFusionMX\db\' is changed to
'C:\CFusionMX\wwwroot') DW now lists all my CF Administrator
databases.
The problem is CF Administrator can't connect to my Mysql
data sources. It gives me the error:
"Connection verification failed for data source: javaserver
[]java.sql.SQLException: SQLException occurred in JDBCPool
while attempting to connect, please check your username, password,
URL, and other connectivity info.
The root cause was that: java.sql.SQLException: SQLException
occurred in JDBCPool while attempting to connect, please check your
username, password, URL, and other connectivity info"
I've tried changing the 3306 port to 8500, but this doesn't
help.
My java path and connector file is:
C:\CFusionMX\wwwroot\WEB-INF\lib\mysql-connector-java-3.0.17-ga-bin.jar,
Is this a ID/password problem? I've tried both 'root' and
leaving the ID field in the CF Administrator add data source block,
both to no avail. I don't have a password set in Mysql for 'root'
either.
Any help would be gratefully appreciated. I've been working
on this for weeks and keep running into one problem after another.
Thanks a million in advance.
Sincerely,
Graham A. Kerby

If it were me I would use the MySQL JDBC driver and not ODBC. Then DSN versus not-DSN wouldn't be an issue.

I want to connect my Mac Book Pro to the internet in France without any wifi connection available? Mi Fi? Sim card?

I want to connect my Mac Book Pro to the internet in France without any wifi connection available? Mi Fi? Sim card? All we have is a phone signal in this rural French location. I want to be able to Skype to states from there. We have a friend with a 3G ipad who uses an Orange sim card to do it. I would rather not have to buy an Ipad.
thanks

I found out that the data package for one month useage with MiFi is 1G. How many minutes of online time does that correspond to?

Connecting to an Oracle database using ASP

Hi
I am having problems connecting to an Oracle database using ASP. I am trying to do this for a school project the school's database server is running Oracle 9i. The repository is version 6. The web server I have access to only has ASP not ASP.net. What kind of connection string would I need to be able to connect to the database?

You do need to ensure that the Oracle client and Oracle server are compatible, but that is generally pretty easy to accomplish. Unless you are trying to cross more than one major release (i.e. 9.2 client to a 7.3.4 database), you're pretty safe there.
You could try downloading and installing the latest 8.1.7.x Oracle ODBC driver from OTN on the machine with the 8.1.7 Oracle client (I believe the last ODBC patchset was 8.1.7.10), but I don't have particular confidence that that will solve the problem. If it doesn't, we can do an ODBC trace to focus in on the issue, but installing a new driver is a much easier process, so that probably ought to be the first step.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

Hi.I want to connect my laptop to tv using Apple tv. i wannt to make something like mirroring.Can i do it?thnaks

I want to connect my laptop to tv using Apple tv. i wannt to make something like mirroring.Can i do it?
thnaks

Welcome to the Apple Support Communities
If you want to stream the PC onto your Apple TV, you can use AirParrot to do it > http://www.airparrot.com

Connection error to 9i database using JDBC thin driver

When trying to connect to a new 9i database using the JDBC thin driver, I received the following error:
java.sql.SQLException: ORA-00600: internal error code, arguments: [ttcgcshnd-1], [0], [], [], [], [], [], []
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java)
at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java)
at oracle.jdbc.ttc7.Oall7.receive(Oall7.java)
at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java)
at oracle.jdbc.ttc7.TTC7Protocol.fetch(TTC7Protocol.java)
at oracle.jdbc.driver.OracleStatement.doExecuteQuery(OracleStatement.java)
at oracle.jdbc.driver.OracleStatement.doExecute(OracleStatement.java)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java)
at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java)
at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java)
at oracle.jdbc.driver.OracleDatabaseMetaData.getTables(OracleDatabaseMetaData.java)
I have no problem with my code connecting to an Oracle 8 database, just 9i.
I'm trying to debug in Visual Cafe (JDK 1.1.7) and have both the classes111.zip and the nls_charset11.zip in my CLASSPATH.
Any suggestions would be appreciated. Thanks

If you're using 8i 8.1.7.1 or 8i 8.1.7.0 thin JDBC drivers on NT, then you can get them to connect to 9i by applying the 8i 8.1.7.1 Patch available at:
http://technet.oracle.com/software/tech/java/sqlj_jdbc/htdocs/solsoft.html
You might have to register/login first.
Basically, it's just a case of replacing a class already in your classes111.zip or classes12.zip with the class in the patch.
Took me a while to find this, but it worked first time after patching. Hope this helps.

Not able to connect to remote MySQL database using Connector/J

I have an application that uses a connection pool for database access.
It is initialized with this context.xml entry:
The db server is running on port 3307.
     <Resource name="jdbc/DB" auth="Container"
                    type="javax.sql.DataSource" username="un" password="pw"
                    removeAbandoned="true" removeAbandonedTimeout="60" logAbandoned="true"
                    driverClassName="com.mysql.jdbc.Driver"
                    url="jdbc:mysql://localhost:3307/myDB"
                    maxActive="8" maxIdle="4"/>Now after starting the context, I can see I have a connection to my database using the MySQL Administrator. So I know I am connecting.
The problem is, when I try to query any table in the db, I get this message:
java.sql.SQLException
: Table myDB.TABLE_NAME' doesn't exist
at com.mysql.jdbc.MysqlIO.checkErrorPacket(
MysqlIO.java:2921) ...
I know it does in fact exist because I am looking at it. And the code I am using works perfectly fine as long as it is running on a local db server.
Any ideas?

I know it does in fact exist because I am looking at
it. And the code I am using works perfectly fine as
long as it is running on a local db server.
Any ideas?Yes two.
I am bit unclear about the last thing you said... you are testing with two different servers or two different clients?
Anyway here are the possibilities off the top of my head.
1) Some sort of security issue. Surrounding who and from where users can connect to the database in question.
2) Case sensitivity problem. On Windows MYSQl makes all it's table names lower case only. Then it onlu supports the correct case to access them.
For example
CREATE TABLE TestMe
Can then only be accessed with
SELECT * FROM testme
Not TestMe.
This appears to vary with version but i have seen this issue before.

If the production database i down, how to switch to standby database using the replication environment in ASsE

This question is in Business Continuity Plan (BCP)
if the production database is down, how to switch to standby database using the replication environment in ASE

Assuming you're referring to Sybase's Replication Server (repserver) product ...
Repserver moves data changes from one database to another.
Repserver can't 'switch' your application to use a different database; something outside of repserver has to do the actual switching.
If your application happens to be connecting to your ASE via Sybase's OpenSwitch (or similar) product, then OpenSwitch would be responsible for switching your application to use the standby database. Whether you have OpenSwitch perform the switch automatically, or via a manual command, is up to your BCP requirements.
If your application connects directly to ASE then you'll have to decide how/when to get your application to switch to the standby database. In the simplest form this would require shutting down the application, making sure replication is quiesced (ie, all in-flight transactions have been applied to the standby database), modify the interfaces/sql.ini file (used by your application) to point to the standby database, make any customized changes to the standby dataserver/database (eg, unlock application logins, take databases out of 'dbo use only' mode, etc), and startup the application (at this point it should connect to the standby database per the changes to the interfaces/sql.ini file).

Problems connecting using MM.MySQL JDBC driver - Please Help

I have been trying to get the driver to work for the past two days and have hit a brick wall. If someone could offer any ideas on what other steps to try I would so much appreciate it. Here's the situation:
I'm working on Mac OS X.1, jdk 1.3, mysql (database) and using the mm.mysql driver version 2.0.6.1. I'm using a test script which loads the driver, tries to connect to the 'test' database (which doesn't require a username/password) and then prints out the systems date when successful.
//load the driver
Class.forName("org.gjt.mm.mysql.Driver");
//Try connecting to db
Connection conn = DriverManager.getConnection(jdbc:mysql:///test", "", "");
Statement stmt = conn.createStatement();
ResultSet rset = stmt.executeQuery("SELECT now();");
while (rset.next())
System.out.println(rset.getString(1));
// Close result set, statement and DB connection
rset.close();
stmt.close();
conn.close();
The problem is that everytime I run the script I get an error telling me that the driver could not be found:
Exception in thread "main" java.lang.ClassNotFoundException: org.gjt.mm.mysql.Driver
��at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
��at java.security.AccessController.doPrivileged(Native Method)
��at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
��at java.lang.ClassLoader.loadClass(ClassLoader.java:297)
��at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.j
The mysql database is running in the background, the driver's path location has been added to my classpath and I've also tried modifying the driver name as well as using older versions of the driver itself, but still no luck. This needs to be up and running so I can finalize a project I've been working on. If anyone has any ideas on what I could possibly try next, I welcome the suggestions.
Thanks in advance.

I didn't realize you had to extract the information either.
Ok.. so I downloaded the latest jar file from sourceforge, extracted the data and IT WORKED!! Thank you so much. You saved my head from exploding.
Many thanks.
-c

I got an iphone 4. I had to update my macbook pro to Lepard just to sync. I updated to lepard. Now when I try to sync itunes does not recognize my new iphone 4 as mine and wants to erase everything I have bought using the phone.

I upgraded from Iphone 3g to iphone 4. I had to update my macbook pro to Lepard just to sync. the **** thing with the new iphone 4. I bought and updated to lepard. Now when I try to sync itunes does not recognize my new iphone 4 as mine and wants to erase everything I have bought using the phone before it will sync! It says everything on the phone now will be cleared in order to sync it with my existing info on the computer from my previous iphone. How can I just get everything from my current iphone 4 into itunes, basically add it to the info from my previous iphone 3g that is currently in my itunes? I dont want to lose what I have on my phone currently....I paid money for half the apps for crying out loud.
I was so frustrated by this when I first bought the phone that I just pushed it out of my mind and NEVER synced it. Please help...

Nope - you cannot restore a backup from a newer iOS version on to a device running an older iOS version. The reverse works, but in your case to use your backup, you must update to iOS 7.0.3 - no other option if you want to use that backup.

HT3382 I have a Samsung VGA Monitor connected to my MacBook Pro using the Mini Display Port to VGA Adapter. How do I configure the computer so that it doesn't sleep when I close the lid of the computer.

I have a Samsung VGA Monitor connected to my MacBook Pro using the Mini Display Port to VGA Adapter. How do I configure the computer so that it doesn't sleep when I close the lid of the computer.

Hi alangium,
Welcome to the Support Communities!
Resetting your computer's PRAM should restore your Macbook Pro's screen appearance.
OS X Mavericks: Reset your computer’s PRAM
http://support.apple.com/kb/ph14222
This article may provide some information about your Mini DisplayPort to AVI adapter. Have you tried to connect a different VGA monitor to your Macbook to see if you get the same results?
Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
http://support.apple.com/kb/HT3382
18. What is the maximum resolution available for use with the Apple Mini DisplayPort to VGA adapter?
The resolution available with the Apple Mini DisplayPort to VGA Adapter is 1920 x 1200. VGA displays that use higher refresh rates (such as 85 Hz) at resolutions of 1600 x 1200 or greater may not generate video properly until you lower the refresh rate.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573#5
How can I detect displays?
If the detect displays option is not available, hold down the Option key while you are in the Display pane.
How do I select additional resolutions on my display?
You can use the Display pane of System Preferences to specify how your display works. Not all options appear for all display models. By default the best resolution for your display will already be selected in System Preferences.
To select a different resolution, use the Scaled option. Some additional resolutions may be available when you hold the Option button.
I hope this information helps ....
- Judy

I have an iphone 4, i connect it to my laptop using the usb and then when connecting to itunes it says my phone is not up to date with itunes yet i cannot find an update 11.1 for my phones itunes? someone please help me.. kind regards

i have an iphone 4, i connect it to my laptop using the usb and then when connecting to itunes it says my phone is not up to date with itunes yet i cannot find an update 11.1 for my phones itunes? someone please help me.. kind regards

Itunes 11.1 is for your computer, not your iphone
It is required in order to sync with ios 7.

I want to cut out a head from a photo and insert it into another photo again. In the head hair flying in the wind and the blue sky can be seen between the hairs. This blue sky I want to remove, so I can only use the head with hair flying in another photo.

I want to cut out a head from a photo and insert it into another photo again. In the head hair flying in the wind and the blue sky can be seen between the hairs. This blue sky I want to remove, so I can only use the head with hair flying in another photo. Is it possible to simply delete this blue color of the sky?

Make your selection and then use Refine Edge.
See this video tutorial from Bob Gager.
https://www.youtube.com/watch?v=xrl3Qwg6zSc

I have CS 6 which requests I sign in to access my serial numbers, which I have already, and it fails to connect so that I cannot use the programs. How do I get past this, is there a direct line to customer support?

I have CS 6 which requests I sign in to access my serial numbers, which I have already, and it fails to connect so that I cannot use the programs. How do I get past this, is there a direct line to customer support in the UK?
Thanks

Sign in, activation, or connection errors | CS5.5 and later
Mylenium

I want to connect to a Profile database using the Sanchez JDBC Driver.

Similar Messages

Maybe you are looking for