I want to connect tpg261 with labview serially but in NI max i always got no device found, how can i get drivers of pfeiffer tpg261??

i downloaded the drivers from the main site but in that zip file all .vis are there. no setup is given.
plz help me to fing this driver.
here, i am submtting the zip file.
Solved!
Go to Solution.
Attachments:
LabView_Dual_Gauge.zip ‏593 KB

The only thing you will detect in MAX is the com port that you have connected the instrument to. Unzip to the instr.lib folder

Similar Messages

I havev installed a new Hard Drive on my laptop but cannot find my Photoshop Elements product box with the serial number to install Elements 10 or Elememts Premier 10. How can I find out the serial / installation codes for these?

I havev installed a new Hard Drive on my laptop but cannot find my Photoshop Elements product box with the serial number to install Elements 10 or Elememts Premier 10. How can I find out the serial / installation codes for these? I saw a reply however, it was not my name and assumed it was for someone else. Now timed out. Can UI still have help on this matter please?

If you registered PSE before, go to the main page of adobe.com, sign in and go to your account and you should find the serial number there in your purchases.

I imported a slide on my old mac book pro to my iTune i had on it, but it got a new one how can i get my old iTune back with that slide i imported

imported a slide on my old mac book pro to my iTune i had on it, but it got a new one how can i get my old iTune back with that slide i imported

If this is a question about syncing with iTunes, you might want to post it over in the iTunes forum.

Apple ID. My newly updated iPad 2 wants an email for the apple ID. My apple ID is not an email address. How can I get past the set-up screen?

My newly updated iPad 2 wants an email for the apple ID. My apple ID is not an email address. How can I get past the set-up screen?
I can't change my Apple ID. It would mess all my stuff up.

To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iPhone (if you're using iOS 7), then sign back in with the ID you wish to use. If you don't know the password for your old ID, or if it isn't accepted, go to https//appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Tap edit next to the primary email account, tap Edit, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https//appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

I was listening to music on my ipod shuffle when it went off.It hasn't turned on since then.When i connect it to the computer,the connection and disconection sounds play continuously without the ipod showing.What could be wrong or how can i get it to work

I was listening to music on my ipod shuffle when it went off.It hasn't turned on since then.When i connect it to the computer,the connection and disconection sounds play continuously without the ipod showing.What could be wrong or how can i get it to work?

Hello,
I am currently an owner of an Ipod Touch 4th generation. I see you are having problems with your Ipod Touch, so I will try to find a solution to your problem.
Hold down the Sleep/Wake and Home buttons for at least 10sec. or until Apple logo appears (Nothing will be lost, this is just a "Hard Reset")
Hope that helps!
If none of the above solutions work, can you please respond back ASAP as I will try to find another solution to your problem (This might even help others with the same problem!)
Cheers!
Pizza98704

I am unable to update devices with Apple Configurator because of this message - unable to send ClearPasscode command to device - I am running Configurator 1.5 and ios 7.1.1. I am unable to rename/number devices. How can I get rid of this error message.

I am unable to update devices with Apple Configurator because of this message - unable to send ClearPasscode command to device - I am running Configurator 1.5 and ios 7.1.1. I am unable to rename/number devices. How can I get rid of this error message.

I've just seen this message for the first time and it's showing on 10 devices.
What I really love about Apple Configurator is the copious amount of context driven help offered to you.
"Unable to send ClearPasscode command to device.
The device was disconnected.
Check the USB connection to the device."

After copying a movie to the harddisk of my MacBook I wanted to also copy it to my iPad, but for this you first have to copy it to the library in iTunes, but this doesn't seem to be working. So how can I get this movie to the library ? And to the iPad ?

After copying a movie to the harddisk of my MacBook I wanted to also copy it to my iPad, but for this you first have to copy it to the library in iTunes, but this doesn't seem to be working. So how can I get this movie to the library ? And to the iPad ?

How is it not working? And how are you doing it? Drag the movie onto the iTunes icon on the Dock... what happens?

My phone is stolen i need to get the serial number but i only have yje IMEI what should i do how can i get my serial number

my phone is stolen i need to get the serial number but i only have yje IMEI what should i do how can i get my serial number

Why do you need the serial number? The phone can't be tracked by either serial number or IMEI.
See this article:
http://support.apple.com/kb/HT4061

I downloaded garage band on my iPad ages ago but now it just says waiting and when I click on it it just says "retry" and does nothing. I've spent literally ages making songs (I've got like 20 ). How can I get it back with all my songs still there?

I downloaded garage band on my iPad ages ago but now it just says waiting and when I click on it it just says "retry" and does nothing. I've spent literally ages making songs (I've got like 20 ). How can I get it back with all my songs still there?

Thanks for that. Much more constructive than the last comment. It's only the restriction code I can't recall, not the access passcode. So I can currently access the device, just not age restricted content. Does that's make a difference? I also wondered if anyone knew how many attempts you get to try to get it right. Now tried 21 times and so far nothing bad has happened but I am concerned I'll eventually be completely locked out of the device. That doesn't seem in the spirit of things though. Surely it's foreseeable that a child could repeatedly try to guess the code so I can't see that it would be right to lock the device down completely in that circumstance, particularly if the access code is being typed in correctly every time.
Thanks

Siri help! so i saw on the siri commercial where the guy says text my wife, tell her ill be late or whatever. i tried it with my girlfriend but it says i dont know who your gf is. how can i set it up so it knows?

so i saw on the siri commercial where the guy says text my wife, tell her ill be late or whatever. i tried it with my girlfriend but it says i dont know who your gf is. how can i set it up so it knows?

Say to Siri "My girlfriend is Jane Doe" or whatever her name is in your contact list. Now would be a good time to read the manual. There's a bookmark for it in Safari on your phone.

HT5622 i want to buy something on a game but it keeps saying your purchase could not be completed. how can i slove this poblem?

i want to buy something on a game but it keeps saying your purchase could not be completed. how can i slove this poblem?

Do you have a valid credit card andhave sufficient funds in there?

My new smart TV recognizes my network, & asks, "Please enter you WEP keys (10 or 26 hex digits)" but my netwotk uses a password of 6 characters. How can I get my smart TV to connect to my network?

I have a current iMac with the latest OS update.
My new smart TV recognizes my network, & asks, “Please enter your WEP keys (10 or 26 hex digits). My Airport Express, an early model, only requires a password of less than 10 characters.
When I open “airport utility,”on my iMac it tells me this version doesn’t support my base station & says go to “Airport Service & Support.” That’s what got me here.
My earlier MacBook runs OS 10.6.8. Its version of Airport Utility works. Its Airport ID has 17 characters, & uses the same password to access the internet, but it also has a “wireless password” of 26 characters, but only shows me the dots. i haven’t the foggiest notion what the characters are, if I put them in there years ago when i did the original configuration, or if they got there otherwise..
I’m afraid of changing those settings for fear that I’l mess up the whole thing.
How can I get my smart TV to connect to my network, ?

Please check out the following AirPort User Tip on how to recover AirPort passwords.

I bought printer with that recognizes my wireless router it is hook up to my pc, how can i get my mac and i pad to print to to, i bought printer with that recognizes my wireless router it is hook up to my pc, how can i get my mac and i pad to print to to

i bought a printer with wireless capabilities, i have it recongnizing my router and it is loaded to my pc. how can i get the printer to recongnize my mac book and ipad. all my apple prouducts use my router.

While uselessSABOTAGE's advice is great, in case of future issues, it would helps us in the future if you would post accurate tech specs of your model iMac.
You info states you have an older IMac PowerMac, but is also says your OS X version is OS X 10.7.2.
This is not possible. OS X 10.7.2 Lion only runs on Intel CPU Macs.
Please, go up to the Apple symbol in the upper top left of OS X main menu bar. Click the symbol. Then click About this Mac. A popup window appears that gives some basic info. Then, click the More Info button and both post your iMacs complete specs by selecting/highlighting all of the info and copy paste this into a reply to this post, editing out your iMac's serial number. Then update the info you posted in your user profile with some of this new found data for future postings.

I updated my iPhone 4 to iOS5 and let it sync with my Macbook and now all my iPhone iCal entries are gone. How can I get my iCal events back on my iPhone?

I updated my iPhone 4 to iOS5 and let it sync with my Macbook (running Lion) and now all my iPhone iCal entries are gone. How can I get my iCal events back on my iPhone?

Me too! Help anyone?

I have just purchased a 5th generation iPod Nano. I have synched it with my library but the videos have not gone on to it. How do I get my videos over to my new iPod

I have just putchased a 5th generation Ipod Nano and when I synced it with my Itunes library I cannot get the Videos to go onto the Ipod. How can I get my ENTIRE iTunes library over to my new iPod

Make sure iPod is configured to sync movies from under its Movies configuration tab. See this article for more details.
http://support.apple.com/kb/HT1333
B-rock

I want to connect tpg261 with labview serially but in NI max i always got no device found, how can i get drivers of pfeiffer tpg261??

Similar Messages

Maybe you are looking for