Ideapad A1-07 tablet wifi-bluetooth does not work!

Hello everyone. As you can see from the title on my tablet is not working wifi and bluetooth. When turning wifi tablet is reset and continues to be off and on until it forcibly turns off, and when you turn it on again, and do not touch wifi everything is normal and there are no problems with resetting. Can someone help me and give suggestion to solve this stupid problem. I'm from Croatia and I'm bad with the English writing.

Hi
Welcome To Lenovo Community
Please perform a factory reset
Please ensure you have backed any important data before doing factory reset
Hold the volume down and the power till Lenovo logo appears .
System will boot into recover mode. Follow the instructions
Hope This Helps
Cheers!!!
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with Kudos!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

WiFi iPhone 4S does not work after update iOS 6.0

WiFi iPhone 4S does not work after update iOS 6.0

This sounds more like a hardware issue.
Have you checked that the dock connector port is not dirty?

I am using iPad1. Running v4.3 and when connecting to wifi iPad keyboard does not work. Keyboard works for everything else including typing this question out. Why would it not work when typingin password for wifi connection?

I am using iPad1. Running v4.3 and when connecting to wifi iPad keyboard does not work. Keyboard works for everything else including typing this question out. Why would it not work when typingin password for wifi connection?

Kowhai wrote:
Lots of WIFI needs a username and password to get access. I guess you're lucky and yours is set up unsecured.
Normal secured WiFi requires only a password to get access. The password is used to encrypt traffic between your device and the WiFi access point. If whatever you are using requires a username as well then it is not simply normal secured WiFi. It might be a subscription WiFi service like GOGO, ATT, etc., or a service with authentication, i.e., college campus, etc. To help you out we need to know what you are using and what connection dialog you are being presented with. You don't have exactly the same problem as the original poster. He is having a problem entering a password into the password dialog that iOS presents when one tries to connect to a normal secured WiFi network. Could you clarify exactly which WiFi service you are using.

Time capsule Wifi (for guest) does not work

Using the last model of airport time capsule, i faced an issue with the guest wifi. I see the guest wifi on the available wifi list, then i digit the password (system accept it) but i cannot abtain any connection. I tried several time by making several set up (also without protection) but the connection does not work. Only the main wifi is working well (i mean the wifi without any restriction..used by administrator). Someone could help me? thx Marco

The TC must be in router mode.. if it is in bridge even though it looks like guest network is available and even though Apple says it now works.. it doesn't.

Yoga tablet 2 pro microphone does not work with Skype or Google+ hangout

I have a new yoga tablet 2 pro, with most recent build and most recent version of skype for android.
When using skype or hangout, the other party cannot hear me (unless I speak directly into built-in microphone hole from a few inches away). The mike works fine with OK google, etc. Skype and hangout also work well with earphone and external mike combo.
I think there is a problem with apps accessing microphone gain....... is there a fix?
thanks!

In order to assist my investigation into these reports, if you are still experiencing this issue could you please provide:
the model number
If the model is wifi/3G/LTE
the OTA your device is running
Thank you,
Amy Tupper
Technical Resolution Lead, Pervasive Issues
Lenovo US
ThinkPad T431s, S3 Yoga 14, Helix, Edge 11 & 14, E431, IdeaTab A1107, IdeaPad A1-07, IdeaCentre Horizon, Yoga Tablet 2 10 1051
First computer was a 1980 Commodore 64 from Radio Shack/ GEnie SFRT member from 1993-1996

HT1386 Does this work for anyone? For a company who spouts "It Just Works" this WiFi sync just does not work.

What's up with WiFi sync? Is there a trick to it? I get it to work once and then it just doesn't work again. I have an iPhone 5, iPad 3, iOS 6, IMac 2011, latest OS and iTunes, a Cisco E4200. How the heck do you make it work?

Is your computer ON while you're trying to sync through wifi? Sync through wifi will work only if your computer is running at the same time.

Lenovo S8-50LC Wlan(WiFi) Does not work when use Sim Cart(3G)

Hi
Tablet Lenovo S8-50LC
Wlan(WiFi) Does not work when use Sim Cart(3G).
What is the solution for this problem?
Build Number : TABS8-50LC_S000200_150121_ROW
SoftWarw Version : TABS8-50LC_150121

Right, but if you have the SIM in the tablet and you put the tablet in airplane mode, does wifi work then? If so, it may be a bad SIM. Do you have another SIM you can try?

A2109 tablet autorotate does not work

The autorotation on my recently purchased tablet A2109 does not work. I look in settings and the auto rotate field is not highlighted, I therefore cannot choose to turn it on.The tablet has the Android jellybean OS and I did update it but to no avail. Can anyone help?
Thanks
Solved!
Go to Solution.

Dear tdsouza
Welcome in lenovo forums
just a clarification , do you mean option Rotate is dimmed in setting
Please let me know
Thanks
Alaa
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

For what reason on my tablet with OS Android 4.1 does not work flash on the sites?

Hi! I recently bought a Google Nexus 7 tablet with Android 4.1 operating system and on my tablet does not work flash sites. Why adobe does not release a new version of flash for android 4.1? Why it was necessary to buy a company Macromedia, if adobe does not want to develop web technology? I think against Adobe can sue for violation of antitrust

I found this for example:
http://www.slashgear.com/adobe-no-jelly-bean-flash-flash-player-pulled-altogether-august-1 5-29236404/

My flash flayer does not work on my Windows 8 Surface Tablet, it also won't let me see if i already

My flash flayer does not work on my Windows 8 Surface Tablet, it also won't let me see if i already have it installed...

1.      Are you getting any error message?
2.      Which browser are you using?
3.      Were there any recent changes made on the computer prior to the issue?

My flash player does not work on my tablet.

My flash player does not work on my tablet

Your tablet uses Android OS.
There is no more Flash Player for Android and there won't be another. Android is no longer compatible with Flash Player. Playing Flash content is very processor consumptive and it drains your battery, also shortening the life of it. Android (Google) recommends using either "Dolphin" or "Puffin" as your browser if you need to view Flash content with a mobile device running Android. They're both free in the GooglePlay store. These browsers use "server side" rendering to reduce the load on your device.

My Time Capsule does not work with existing WiFi

Following a question solved on March 24 by LaPastenague, but gone bad again.
Apple AirPort Time Capsule
I felt the need for a physical backup of my data, as I would not completely trust the different clouds. I use, and have used Dropbox for 4-5 years and are very satisfied with that, but I am still not sure if or when a political lunatic will shut off the internet.
I purchased the Apple AP Time Capsule 2T, because all my other stuff are Apple, and that it's wireless. My old backup is Maxtor 300 GB.
Since we stay 2-3 weeks on two locations, one in Norway and one in Sweden (two different countries) we must use Mobile Broadband 4G, cables or fibre connections are useless for us, and we don't have it up to the houses. I have one mini router for each country, we bring with us iPhones, iPads, iMac, Apple TV, APExpress. When we pass the boarder I change the mini router, and the system continues working perfect on the WiFi, except the APExpress that needs to be reconfigured, but then it works.
The APTC was difficult to make working as it would not accept to be in an existing network, but with good help from the Apple Community, LaPastenague, with forcing the TC connect to the APE with Ethernet cable in bridge mode, ref "My Time Capsule does not work with existing WiFi" from March 24, the problem was solved and all gadgets worked together in a perfect harmony, until we changed location.
Now, as I have my second WiFi network, and the APExspress is reconfigured, it's like the TC thinks, I am the base boss here, I am not taking orders from APE one more time, and it simply does not work, not only that, it fluctuates all the time.
I have a slight feeling that the two WiFi bands are making the trouble as during the configuration of the TC sometime the last figure 6 and 7 pops up, and that has something two do with the two different 2,4 and 5 GHZ bands
So, I am curious if you have any idea ?
I am thinking of returning the TC if I don't make it work now, but how do I delete all the data that's on it?

I can deal with the last question first and easily.
I am thinking of returning the TC if I don't make it work now, but how do I delete all the data that's on it?
Open the airport utility .. go to the disk tab and select erase.
When you select erase you will get mulitiple options.
Quick removes the file table but does not delete the files,, it takes 2min or less.
A Zero out data is the secure way,, by writing 0 ie low level drive format.
It can take several hours..
7 pass will take a week.. not recommended..
35 pass erase is ridiculous.. it would take a month.. put an ax through the TC. It is quick and better.
Now, as I have my second WiFi network, and the APExspress is reconfigured, it's like the TC thinks, I am the base boss here, I am not taking orders from APE one more time, and it simply does not work, not only that, it fluctuates all the time.
The fact that it did work and has now failed might point to faulty unit.
The only way to tell is reset it properly to factory and start over.
Universal Factory Reset.. any model TC or AE.
Unplug your TC/AE from power or turn off at the power point.
Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. (this is often difficult without a 2nd person or a 3rd arm).
Release it when the status light flashes rapidly. If it doesn’t flash rapidly you have missed it and try again.
Note..
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations of the router.
No files are deleted on the hard disk in a TC.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
Generally having multiple wireless AP should not cause problems.. but it is better to set channels manually.. so it doesn't go beserk rotating channels.
Remember to keep all names short, no spaces and pure alphanumeric.
Sadly though the Apple routers have no logging now and no SNMP and almost nothing to help diagnose a problem, so if it continues .. take it back to apple.. they have given you no other method of fixing it.

SWP 6.4 install on second computer in wifi WIN 7 network does not work for me.

Installed on my desktop, works fine. Installed on my Laptop, does not work.
As administrator I see the clip window, can open and close it but no menu, so I cannot use it.
As user the switch in the toolbar is there but it does not activate the clip window.
On both machines the OS is Win 7 Home Premium, the printer is the Smart 109B. Printing through Wifi to my printer which is attached to my desktop as a USB-printer works fine. But i take it the real printing is not involved in working with SWP. Maybe networking but I cannot find any hint. Pse help me.
Henk

Hi Tomasz,
as I figured out, this problem is related to the usage or measurement of the InDesign-document at least for me.
I create two portrait-oriented InDesign Layouts.
For the first I choose Print-usage in the New Document-dialog.
For the second I choose Web-usage in the New Document-dialog.
The first will render as bitmap (wrong).
The second will render as PDF (correct).
Folio- and Article-Image-Type is set to PDF in both cases.
Strange behavior.
Regards
Ingo
Am 06.09.2011 um 15:52 schrieb Tomasz Kuczborski:
OK. Ingo, have a look:
attached below is what you see whenever you create new article. So, if you create 10 articles, you have 10 opportunities to set the rendering intent differently. I think this is wrong, as the image format setting applies to the whole folio. Or maybe it has changed recently? If not, the least what should happen is a warning, that your new choice changes the actual setting.
Cheers,
Tomek
http://forums.adobe.com/servlet/JiveServlet/showImage/81969/ScreenShot2011-09-06at15.46.58.png
>

My wacom tablet does not work correctly after updating to mavericks.

My wacom doesn't work.

Jason, how did you switch back? My tablet does not work either. All I can do for the moment is work on my laptop which has the old system.
Thanks,
Teresa
I was almost certain that the new osx would be trouble as was Lion and after that Mountail Lion. So, instead of my usual hard drive clone, which I make with superduper, I made a second one just to be certain. After 10 minutes of Mavericks, I am happy back to snow leopard.
I really think that it is the most developed, glitch free operating system. If it wasn't for all these money thirsty companies stopping the support of the previous op. systems perhaps we could stop at Snow leopard. What more to ask. Even aesthetically osx 10.9 is much worse that snow leopard.
Anyway, long answer. sorry. It is a good habit to clone your HD once in a while.
p.s. my only reason for wanting to upgrade is because Lightroom stopped support but I am still doing my work with the previous versions. I guess people will allways think that if they have the newest, biggest, baddest version of a software will make them better in what they do..or in who they are, really.

EPrint does not work after new wifi router on Verizon DSL

I have been using ePrint on my iPod, iPad, and iPhone for a few months without a problem, but recently had to switch to a new wifi router on my Verizon DSL, as my wifi kept turning off and Verizon's solution was an updated wifi router. Since the switch, I cannot ePrint from my mobile devices. I can, after reconfiguration, print from my laptops. The ePrint app still finds the Deskjet 3050a, says "sending to printer", but will not print. The ePrint is turned on. I tried to delete the app and reinstall in hopes that I can start fresh, but it still does not work. I tried to add a new printer, with the email supplied on the ePrint screen on the printer, but nothing.
Any ideas?

Hi Honor Student
Is your printer connected to the new router as it sounds like it is still looking for the old one ? Maybe just disconnect it and reconnect it again to your new router and then the ePrint APP should pick it up.
I work for HP.
Thanks
Caroline
Although I am a HP employee, I am speaking for myself and not for HP.

Ideapad A1-07 tablet wifi-bluet​ooth does not work!

Similar Messages

Maybe you are looking for

Ideapad A1-07 tablet wifi-bluetooth does not work!