I want to create report on Sybase which provider I should use.
I want to create report on Sybase which is good provider that I should use. I don't want to use the DSN.
CR no longer has a native Sybase driver. Your only option is to u se ODBC or possibly a JDBC driver if they have one or their client supports one. Look on Sybases site for options.
Similar Messages
-
I wanted to create a module pool which accepts a table n flag
i wanted to create a module pool which accepts a table n flag.
and based on flasg value it allows the table to get into edit or display mode.
the table has to use table control to display for user
and it should be able to edit the table as well as append if the flag value is edit.
the table which has been change should be passed back.HI Shailesh ,
On your screen which contains the table control , you can definately put the flag . Now use 2 conditions , one for change n other for display mode .Initialize the value of the flag to be "X" and based on the flag valu design your table .
lets say u have a screen 0100 ,
at the begining put FLAG = 'X'.
lets say , this is for your change screen .
then loop at the table control and allow the fields for fields input . all you should do in the PBO only .
next in PAI , fill the table control with the changed values .
and in PAI , in AT-user command module , code for the flag ( / push button ) . and pass the values when the user clicks on the button .or else here you can check whether the value of the flag is "X" ( for change mode ) or " " .
if it is " " then loop at the screen and make all the fields inactive for input ( Display mode )
Inactivation of the fields should be done in the PBO based on the conditions .
Revert back if you need further clarification .
This logic should definately work .
Reward if helpful .
Thanks
Ranjita -
In which situations we should use Character Mode Reports?
Question: In which situations we should use Character Mode Reports?
Explaination: I am faced with a certain situation. I feel that I should develop reports in Character Mode. But I am not sure about this.
I invite all readers to contribute on the subject matter. Once I receive responses, I will explain my specific situation as writing it now may narrow the list of such situations.
Also I would like to know what problems we face when developing reports in Character Mode. I was developing my first Character Mode report and I faced layering problems. So I would like to know more such precautions.
TIA
TariqHi Muhammad,
There's any number of cases for using character mode Reports. However, they all typically come down to what your doing with the output of the report.
Basically, you need character mode reports whenever the Report output needs to be read by some sort of Ascii file reader. This could be notepad, VI, MSVC, dot matrix or fixed character set printers, ...
A less common case is where you just want to get at the data within the report. You're just using the ascii output as a data dump to pass through to another program/utility. (This is really just a specialised case of the previous one).
There are some cases where character mode output may be one of several choices. Eg: the body of an email message which could be HTML or plain text.
Robin. -
Which tool i should use to develope a portal
Hi all,
we are planning to develop a portal which we will expose to internet.
Now my question is which tool i should use to develope this
1.BSP
2. jspdynpage
3.Webdynpro java
4.Webdynpro abap
Which application will perform better on internet.
Lots of rfc calls and webservice calls are there.
plz give me suggestions .
Thanks
developerHi,
BSP - Abap workbench
JSP Dynpages - NWDS (Netweaver Dev Studio)
Webdynpro Java - NWDS
Webdynpro ABAP - ABAP Workbench
above all applications will perform at same level depend on the content.
best regards
Hari -
Which protocol we should use for file transfer in ios ?
which protocol we should use for file transfer in ios ?
My friend that's definitively a Lotus Domino question, you'll probably ask in the Domino's forums if it generates wsdl, or simple http services you're ready to consume those services in Flex.
-
Which Listener I should use if I drag and Drop an image/icon into a JPanel?
Dar Friends:
Happy new year.
I try to drag and Drop an image/icon into a JPanel, and hope I can immediately detect it after DND,
Which Listener I should use in this JPanel if I drag and Drop an image/icon into a JPanel??
ThanksThank camickr .
I can dnd an image into a JPanel called JPanelOld already, I hope to use another JPanel or JTree to listen to any Dropped Image in JPanelOld later on so I can take some action in another JPanel or JTree.
so what kind of Listener I should use for my purpose??
where to add this Listeners??
Happy New Year. -
Can someone tell me which player I should use to run flv,avi file in my iPad 3 after downloading video from any site ????
Can someone tell me which player I should use to run flv,avi file in my iPad 3 after downloading video from any site ????
-
I have an iPhone in my name and my wife has an iPad in her name. We have just ordered an iMac and wondered which account we should use to get the best out of all the devices? Can we use both accounts in iCloud?
Yes you can. However, it is better to use one person's account most of the time for purchases in the Mac App Store and iTunes since you can share purchases, such as songs, among various devices using the SAME account. You Cannot share purchases among different accounts, though. So make one of your accounts the main "purchasing" account so you can share purchases.
Hope this helps -
Want to create a function module which will convert smartform into PDF .
Hi All ,
Requirement : I want to create a function module/report which will convert smartform into PDF .
Thanks in advanceHi All ,
zsuresh_test : for converting smartform into pdf.
when I am excuting this report(zsuresh_test) and by passing the smartform name FOPCR_STANDARD_F1
I am getting error :
Incorrect parameter with CALL FUNCTION
Can you please help me out..
REPORT zsuresh_test.
Variable declarations
DATA:
w_form_name TYPE tdsfname VALUE 'FOPCR_STANDARD_F1',
w_fmodule TYPE rs38l_fnam,
w_cparam TYPE ssfctrlop,
w_outoptions TYPE ssfcompop,
W_bin_filesize TYPE i, " Binary File Size
w_FILE_NAME type string,
w_File_path type string,
w_FULL_PATH type string.
Internal tables declaration
Internal table to hold the OTF data
DATA:
t_otf TYPE itcoo OCCURS 0 WITH HEADER LINE,
Internal table to hold OTF data recd from the SMARTFORM
t_otf_from_fm TYPE ssfcrescl,
Internal table to hold the data from the FM CONVERT_OTF
T_pdf_tab LIKE tline OCCURS 0 WITH HEADER LINE.
This function module call is used to retrieve the name of the Function
module generated when the SMARTFORM is activated
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = w_form_name
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
fm_name = w_fmodule
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Calling the SMARTFORM using the function module retrieved above
GET_OTF parameter in the CONTROL_PARAMETERS is set to get the OTF
format of the output
w_cparam-no_dialog = 'X'.
w_cparam-preview = space. " Suppressing the dialog box
" for print preview
w_cparam-getotf = 'X'.
Printer name to be used is provided in the export parameter
OUTPUT_OPTIONS
w_outoptions-tddest = 'LP01'.
CALL FUNCTION w_fmodule
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
control_parameters = w_cparam
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
output_options = w_outoptions
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
job_output_info = t_otf_from_fm
JOB_OUTPUT_OPTIONS =
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
t_otf[] = t_otf_from_fm-otfdata[].
Function Module CONVERT_OTF is used to convert the OTF format to PDF
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
FORMAT = 'PDF'
MAX_LINEWIDTH = 132
ARCHIVE_INDEX = ' '
COPYNUMBER = 0
ASCII_BIDI_VIS2LOG = ' '
PDF_DELETE_OTFTAB = ' '
IMPORTING
BIN_FILESIZE = W_bin_filesize
BIN_FILE =
TABLES
otf = T_OTF
lines = T_pdf_tab
EXCEPTIONS
ERR_MAX_LINEWIDTH = 1
ERR_FORMAT = 2
ERR_CONV_NOT_POSSIBLE = 3
ERR_BAD_OTF = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
To display File SAVE dialog window
CALL METHOD cl_gui_frontend_services=>file_save_dialog
EXPORTING
WINDOW_TITLE =
DEFAULT_EXTENSION =
DEFAULT_FILE_NAME =
FILE_FILTER =
INITIAL_DIRECTORY =
WITH_ENCODING =
PROMPT_ON_OVERWRITE = 'X'
CHANGING
filename = w_FILE_NAME
path = w_FILE_PATH
fullpath = w_FULL_PATH
USER_ACTION =
FILE_ENCODING =
EXCEPTIONS
CNTL_ERROR = 1
ERROR_NO_GUI = 2
NOT_SUPPORTED_BY_GUI = 3
others = 4
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Use the FM GUI_DOWNLOAD to download the generated PDF file onto the
presentation server
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE = W_bin_filesize
filename = w_FULL_PATH
FILETYPE = 'BIN'
APPEND = ' '
WRITE_FIELD_SEPARATOR = ' '
HEADER = '00'
TRUNC_TRAILING_BLANKS = ' '
WRITE_LF = 'X'
COL_SELECT = ' '
COL_SELECT_MASK = ' '
DAT_MODE = ' '
CONFIRM_OVERWRITE = ' '
NO_AUTH_CHECK = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
WRITE_BOM = ' '
TRUNC_TRAILING_BLANKS_EOL = 'X'
WK1_N_FORMAT = ' '
WK1_N_SIZE = ' '
WK1_T_FORMAT = ' '
WK1_T_SIZE = ' '
IMPORTING
FILELENGTH =
tables
data_tab = T_pdf_tab
FIELDNAMES =
EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
SEPARATOR_NOT_ALLOWED = 8
FILESIZE_NOT_ALLOWED = 9
HEADER_TOO_LONG = 10
DP_ERROR_CREATE = 11
DP_ERROR_SEND = 12
DP_ERROR_WRITE = 13
UNKNOWN_DP_ERROR = 14
ACCESS_DENIED = 15
DP_OUT_OF_MEMORY = 16
DISK_FULL = 17
DP_TIMEOUT = 18
FILE_NOT_FOUND = 19
DATAPROVIDER_EXCEPTION = 20
CONTROL_FLUSH_ERROR = 21
OTHERS = 22
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. -
I Want to create report that do
Hello All
I want to make sql statment to dispaly months from jan and up to special (varible) month ,main reson is that i have table for empployees salaries every month and i want to make report to display employees salaries from start of year till to special
month supose my system installed in may 2005 i want report to display jan,feb.mar,april with value of zero
tank uCreate a table with months, and use an outer join to this table to retrieve records even if there are no salary data.
Look here:
Re: Empty records -
Using two T lists i want to create a UI, from which user can make selection
I want to create a UI in forms 6i, wherein there will be two T lists on the same canvas. I'll populate the left one from the record group and then make selections to the right one using four buttons in between.
I'm using the add_list_element, delete_list_element, get_list_element_label, get_list_element_value built ins to do that. But it is not working properly. Giving a lot of forms errors.
The same thing can be done in JDeveloper using a shuttle bean.
An example of the UI that i want to construct :
The kind of UI that i'm talking can be seen when we construct a new form manually, then we goto data block wizard. There we browse for a table and the wizard gives the list of the columns for that table, from this list selections can be done using the four buttons in the same way that i intend my form to do. This is the kind of UI i want to develop.
I'm very new to development in forms. I'm sure you people at OTN will help me.
Thanks,
Abhishek.Hi Abhishek
What is happening by these
Copy(v_value, p_tlist_into); and
...This commans set list item value (list selection).
The most simple way to move all elements between lists is to populate the target list from record group, and the to clear the source list. The lack of the given method - order of elements will be same, as in group.
PROCEDURE Move_All_Elements (p_tlist_from VARCHAR2, p_tlist_into VARCHAR2) is
v_value VARCHAR2(100);
v_label VARCHAR2(100);
v_index_from NUMBER;
v_index_into NUMBER;
v_count_from NUMBER; -- Count elements of tlist_out
BEGIN
--v_index_from := Get_List_element_count(p_tlist_from);
-- Get_List_element_count never return zero!
v_index_from := Get_List_Current_Index(p_tlist_from);
if v_index_from = 0 then -- The source list is enpty
--fnd_message.debug('elements=0, so return');pause;
RETURN;
end if;
--v_index_into := Get_List_element_count(p_tlist_into);
v_index_into := Get_List_Current_Index(p_tlist_into);
if v_index_into = 0 then -- The target list contant only DEFAULT value
--fnd_message.debug('no elements, so clearing the list');pause;
clear_list(p_tlist_into);
end if;
v_count_from := Get_List_element_count(p_tlist_from);
FOR i IN 1..v_count_from
LOOP
v_label := Get_List_Element_Label(p_tlist_from, i);
v_value := Get_List_Element_Value(p_tlist_from, i);
--Add_List_Element(p_tlist_into, v_index_into, v_label, v_value);
Add_List_Element(p_tlist_into, v_index_into+i, v_label, v_value);
-- The commands are lower in a loop are not necessary.
-- The commands after the loop make too most.
--Copy(v_value, p_tlist_into);
--Delete_List_Element(p_tlist_from, i);
--v_index_from := Least(v_index_from, Get_List_Element_Count(p_tlist_From));
--v_value := Get_List_Element_Value(p_tlist_from, v_index_from);
--v_value := Get_List_Element_Value(p_tlist_from, v_index_from + v_index_into);
--Copy (v_value, p_tlist_from);
--fnd_message.debug('done for one element');pause;
--exit when v_label is null;
END LOOP;
clear_list(p_tlist_from);
v_value := Get_List_Element_Value(p_tlist_into, v_count_from + v_index_into);
Copy (v_value, p_tlist_into);
EXCEPTION
when others then null;
END; -
Using two T lists i want to create a UI, from which selections can be made
I want to create a UI in forms 6i, wherein there will be two T lists on the same canvas. I'll populate the left one from the record group and then make selections to the right one using four buttons in between. I'm using the add_list_element, delete_list_element, get_list_element_label, get_list_element_value built ins to do that. But it is not working properly.
I'm very new to development in forms.
If anybody has developed such an UI in forms, please help me.
Thanks,
Abhishek.The kind of UI that i'm talking can be seen when we construct a new form manually, then we goto data block wizard. There we browse for a table and the wizard gives the list of the columns for that table. This is the kind of UI i want to develop. I hope the people at OTN would not dissappoint me.
Abhishek -
Reports to show which workbooks/sheets that use certain folders/columns
Hi,
I need to be able to create reports in Discoverer 10.1.2.45.46c that show which workbooks/worksheets use certain folders and preferably columns.
Can anyone point me in the right direction ?
Thanks
DennisHave you looked at the Admin Guide? - there is an end-user layer export included with the product that has a lot of this pre-built. If it doesn't have the exact report you need at least it builds a lot of structure to help you on your way. You just go into the Admin tool and import the provided EEX file.
-
I have an iPhone, and IPad. I just got a iPod. I want to create a new apple ID for the iPod so I can access face time and messages separately. However can I use the same credit card account?
Just do it. You can use the same credit card for multiple accounts.
-
Problem occured while creating a .dll file which has to be used in CIN
hi all,
i am a rookie in labview,iam getting an error while trying to build .dll file in vc++ 6.0 , i followed all the instructions available in labview "using External Code" manual,the error was as follows;
Compiling...
CINsample2.c
Linking...
Running LVSB Utility
The system cannot find the path specified.
Error executing c:\winnt\system32\cmd.exe.
sample1.dll - 1 error(s), 0 warning(s)
plz help.
santosh.
Regards,
santoshHi santosh,
It sounds to me that you are mistaking CINs (Code Interface Node) with
DLLs (Dynamic-Link Library). You mention that you want to create a DLL
in Microsoft Visual C++, but the errors you are getting are related to
CINs.
Don't worry! Here are my favorite links to getting started creating and using DLLs with Microsoft Visual C++ and LabVIEW:
How to Build a DLL with Visual C++
Creating and Calling LabVIEW DLLs with Various Data Types from Microsoft Visual C++
I hope that this helps you to get on the right path.
Have fun!
- Philip Courtois, Thinkbot Solutions
Maybe you are looking for
-
My itunes radio is not working on my microsoft computer. I downloaded the new itunes but it says there is an error in my itunes store. What do i do to fix the problem?
-
Premiere Pro CS6 Trial Mac crashes on launch
I installed Master Collection CS6 on my Mac Pro tower 3,1 quad core, 16 GBs RAM. I set up a new video project in Premiere and all was going fine, loaded all assets, etc ... Next I was attempting to set up audio hardware for recording a narriation on
-
Apple Mail seems to stall when sending messages
I've had a problem for a few days now with my Apple mail. When I compose and send a message, it seems to stall and stays in my Outbox for ages. The spiral wheel spins continuously but the message doesn't get sent. In a few cases, the mail has taken 2
-
GW 6.5 Tokens and ItemGetText
Greetings, I have a VBA program that opens E-mails and saves attachments from those E- mails to specific directories based on the sender, subject and the attachment name. We are in the testing stages of 6.5 and the following code does not work as it
-
What does "item XUL is in use" mean and how do I turn it off?
It trying to install upgrade, I am asked to replace older item with newer one and I click Replace. Then I get a message "The operations can't be completed because the item "XUL" is in use. What does that mean and how do I proceed?