I want to document of touch id in details (hardware, Software support)

i want to document of touch id in details (hardware, Software support)

hey Stedman1,
already use this article in my documentation but i will need hardware component details like (
Laser Cut Sapphire Crystal
Stainless Steel Detection ring
Touch ID sensor
Tactile Switch)
in above four points, i want to explain this topic so please help me ....

Similar Messages

  • I just purchased a new ipod touch so now I have two. I do not want the second ipod touch to sync the same as the old ipod touch - 2 people with 2 different music preferences. How do I keep them separate.

    I just purchased a new ipod touch so now I have two. I do not want the second ipod touch to sync the same as the old ipod touch - 2 people with 2 different music preferences. How do I keep them separate.

    These are two possible approaches that will normally work to move an existing library to a new computer.
    Method 1
    Backup the library with this User Tip.
    Deauthorize the old computer if you no longer want to access protected content on it.
    Restore the backup to your new computer using the same tool used to back it up.
    Keep your backup up-to-date in future.
    Method 2
    Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
    Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
    I'd recommend method 1 since it establishes an ongoing backup for your library.
    Note if you have iOS devices and haven't moved your contacts and calendar items across then you should create one dummy entry of each in your new profile and iTunes should  merge the existing data from the device.
    If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
    Should you be in the unfortunate position where you are no longer able to access your original library or a backup then then see Recover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data.
    tt2

  • I want to buy ipod touch 4 (8GB) , but i dont know is that enough for me

    I want to buy ipod touch 4, my friends said i should buy 8GB one, but i dont know is 8GB enough for me to use. some people said that it only have 6.7GB for you to use, cause the ipod apps already used some of it. I want to have maybe 100 songs, some apps, pics, few games, 5-7 books, few online movies. For some of these, i would probably delete them and download new ones. So, any suggestion?? Please? I really want to buy it before this summer. but i dont want waste my money.

    I would opt for the 32 GB one. Many users have been disappointed when they purchased the 8 GB since they quickly filled it.
    Some apps can take 1 GB themselves. See the following for some other stirage useages:
    iTunes Store: Download times will vary

  • Documents saved in firefox format cannot be viewed in the preview pane. Why? Also, I don't want my documents changed to another format. How do I change back?

    Documents in Firefox format do not open automatically in the preview pane. Why? Also, I don't want my documents changed from the original format. How do I change them back and how do I keep this from happening again. I don't want to have to select a different format every time I try to open a document. That is a pain in the neck. I want to "click to open" and the document be in it's original format. If necessary I will go back to one of the other browsers I have used in the past. As I don't want multiple browsers on my computer it would be necessary to uninstall Firefox. I like it so far other than you all hijacking my documents and altering the way they open. You also might want to remember that even the "legitimate" folks on the internet are seen as predatory, i.e., gathering information, tricking us into installing crap we don't want or need, and in some cases, requiring a specific program to open a specific document. I'd be working very hard to show you are trustworthy. If you have a solution to this and it is complex then you will be wasting your time and my time trying to explain it. You guys created this so, if I'm going to use Firefox, you fix it on your end. FYI, if I have to uninstall Firefox I will, when asked, strongly recommend against using your service. Thank you.

    Do you mean PDF documents?
    The installer was supposed to add Firefox as an ADDITIONAL viewer for PDFs, not as the DEFAULT viewer. Sorry you were affected by this glitch and hopefully they will figure out why some systems get changed this way.
    You can try this fix suggested by a user in another thread:
    # Open Adobe Reader / Acrobat*
    # Edit->Preferences
    # In the Categories column click 'General'
    # Near the bottom of the page click the button marked 'Select Default PDF Handler'
    # In the dialog, select 'Adobe Reader XI' (or Adobe Acrobat, as the case may be) and click 'Apply'
    # A Windows Configuration screen will appear. Allow it to do its stuff (takes a few minutes), then restart your computer when prompted.
    Does that work for you?
    ''*'' If you do not have Adobe Reader 10 or 11, you can install it from here: http://get.adobe.com/reader/

  • Credit card expiration/I want to get in touch with...

    My CC was expired, I had NO notification prior to it expiring (although I read Skype would notify you). However, I did get a notification afterwards saying it HAD expired and that Skype could NOT auto-renew my account BUT THEY DID as I have a new charge. I could not update my account and see from other posts that others have had same difficulites. The only way I found it to be successful was to delete my whole CC acount and start again and that entailed ANOTHER MONTHLY CREDIT charge. I want to get in touch with Skype and have the second charge REVERSED. This is VERY frustrating not being able to easily access any IT people at Skype! How do I get a hold of someone with in the company?

    just open the link pasted below to see the instructions on how to get in touch with customer service -
    https://support.skype.com/en/faq/FA1170/how-can-i-contact-skype-customer-service
    IF YOU FOUND OUR POST USEFUL THEN PLEASE GIVE "KUDOS". IF IT HELPED TO FIX YOUR ISSUE PLEASE MARK IT AS A "SOLUTION" TO HELP OTHERS. THANKS!
    ALTERNATIVE SKYPE DOWNLOAD LINKS | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUSPICIOS CALLS AND MESSAGES

  • I want add Document type and Document text std report S_ALR_87012357

    Hi Gurus
    I want add Document type(BLART) and Document text(BKTXT)  for std report S_ALR_87012357  .how can i pull these fields .do i need to change the code .
    Please help me
    Thanks & Regards
    Sandya
    Edited by: sandya rani on Feb 3, 2010 1:36 PM

    Hi
    Suggest you to ask the help of the ABAPER & Debug the report  S_ALR_87012357
    Please also check field HWBAS(Tax Base Amount in Local Currency)  in Table BSET  (Tax Data Document Segment)
    Regards
    Praveen P C
    Edited by: Praveen Chirakkel on Apr 20, 2011 6:13 AM

  • I want all document updates and comment notifications on by default

    I got it working and sending mail to exchange.  But now I want to be able to control default notification settings.  For example:  Our company has a phone list in MS-Excel.  When it is updated I was everyone to recieve a notification that it is updated.  I don't want them to have any choice in the matter. 
    And I want all document updates and comment notifications on by default.

    Hi iTunesDJ,
    There is no way to do this. What I would do is put your Settings app on a page itself, so its out of your way. Just ignore your notifactions. I hope this helps!
    Thanks,

  • I can't open pdf, it wants a document password.

    I can't open pdf, it wants a document password.

    Ask the person who created the document for the password.

  • Want to know about User exit in detail

    Hi ALL,
    I M NEW TO sap ABAP. I WANT TO KNOW ABOUT USER EXIT IN DETAIL. PLS DO THE NEEDFUL . If there are eny document regarding this pls mail to this id [email protected]
    thanks and regards
    Nandha

    Hi Nanda,
    Welcome to SDN,
    Userxits allow us to add our own functionality to SAP standard program
    without modifying it . These are implemented in the form of subroutines and hence are also known as FORM EXITs. The userexits are generally collected in includes and attached to the standard program by the SAP.
    User exits are used when the flow for a particular transaction has to take some other route other then the normal flow. this can be the case when you have to attach some additional functionality lik u need a customised screen, or new functionality (using a functional module). based on these things user exits can be classified as screen exits, function module exits, field exits( not used anymore). hope this gives some help on userexits.
    The naming standard of function modules for functionmodule exits is:
    EXIT_<program name><3 digit suffix>
    The call to a functionmodule exit is implemented as:
    CALL CUSTOMER.-FUNCTION <3 digit suffix>
    To find a Exit.
    Goto Transaction -- Find The Package
    SMOD >f4>Use the Package here to Find the Exits In the Package.
    Else if you Want to search by Application Area wise ,
    There is one more tab to find the Exits in the Respective Application Area.
    Implementing the Exit-- CMOD Create ProjectsAssgn your Component .
    Now Run ur Transaction to Check if it Triggers.
    Thats it..
    For More information on Exits, check these links
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sap-img.com/ab038.htm
    http://www.planetsap.com/userexit_main_page.htm
    http://www.sap-basis-abap.com/sapab013.htm
    http://sap.ittoolbox.com/documents/popular-q-and-a/user-exits-for-the-transaction-code-migo-3283
    These links will help you to learn more on user exits.
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/frameset.htm
    http://www.planetsap.com/userexit_main_page.htm
    http://www.allsaplinks.com/user_exit.html
    www.sap-img.com/abap/what-is-user-exits.htm
    Also please check these threads for more details about user exits.
    Re: Screen exit
    user exit and customer exit
    user exit
    1. Document on UserExits in FI/CO
    http://www.ficoexpertonline.com/downloads/User%20ExitsWPedit.doc
    2. Finding User Exits...
    http://sap.ionelburlacu.ro/abap/sap2/Other_Useful_Tips.html#Finding_User_Exits
    3. List of all User Exits...
    http://www.planetsap.com/userexit_main_page.htm

  • TS5376 HI, I installed Itunes on my computer. When i wanted to open the application, it gives error "Apple Application Support not found" "Error 2 (Windows error 2)"

    HI, I installed Itunes on my computer. When i wanted to open the application, it gives error "Apple Application Support not found" "Error 2 (Windows error 2)"

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if a component such as Apple Application Support won't install normally.
    tt2

  • Want to scan to text file on hp oj8600, software indicates only pdf or jpg file creation

    want to scan to text file on hp oj8600, software indicates can do. However printer system software only allows pdf or jpg file type creation.

    Hello @Richf95,
    Welcome to the HP forums.
    I understand that you are trying to save scans as a text file.
    I would like to help.
    PDF has become the standard file type used when scanning/saving a document.
    Most printers will not have text as a default option.
    Try the following:
    Open the HP scan utility
    In the lower left hand corner select 'Create New Shortcut...'
    Name your new short cut. I went with Text.
    In the next window select the file tab.
    In the drop down menu, select Text.
    This should create a shortcut that will allow you to save scans as a .txt file.
    Aardvark1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

  • A PDF document with information about activation for CS6 software

    Here's a PDF document with information about activation for CS6 software.
    I found it very useful for understanding how the system worked for activation of perpetual licenses, both in cases where the computer is and isn't connected to the Internet.

    Ann, with some browsers, the PDF document will download in the background rather than appear in a browser window.

  • Help needed! Just want to cancel my year subscription. No answer from support via mail, noone answers when I call, support chat don't work.

    Help needed! Just want to cancel my year subscription. No answer from support via mail, noone answers when I call, support chat don't work.

    Hi there
    I'll pass your details to our Russian team and they'll contact you to assist further.
    Kind regards
    Bev

  • Ipod touch 1st generation w/ upgraded software

    I have an ipod touch 1st generation w/ upgraded software.  I bought the game Angry birds to play, but when I click on the icon, it turns black as though the game is going to load, but it doesn't instead it goes back to original screen.  Any suggestions???

    - Try resetting the iPOd.  Nothing will be lost:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Next try deleting the app and redownloading/installing the app.

  • Updating iPod touch to iPhone 3.0 Software for iPod touch, getting error 14

    I recently tried to update my 2g iPod touch to the 3.0 software. During the installation, I got an error message saying that an "unknown error 14" has occurred. This happened during the restoration process, and then my iPod just gave me the screen with the USB cable and the iTunes logo. iTunes then told me to restore the ipod, and during that restoration process, I got the same error. I also tried doing the restore manually by finding the iPod software on my hard drive, and then option-clicking on the restore button the find the software and then install. If anyone has any fixes or suggestions for this problem, they would be greatly appreciated.

    Ok. I have spent the last 8 hours researching this problem and have the absolute 110% answer to everyone's problem with this issue.
    Error 13 and 14 : Are checksum problems with the firmware image that is in the update package.
    The update package is a .ipsw (IPod or IPhone SoftWare). This file is actually just a .zip renamed .ipsw.
    The error is caused by a failure to download a crc-free version of the file. Not really sure why there are so many crc problems with the iphone updates, but Apple does not check the integrity of the update package before wiping your current version of IPhone software and that is why all IPhones that start an update with a bad update package end up in recovery mode. These errors are NOT related to the iTunes installation, antivirus software, or firewalls.
    Recommendation : use a program like "Object Fix" (Freeware) to verify the integrity of the file prior to commencing with any new updates. You will have to keep trying to download it until you get a error free file. Once you have a CRC error free file this problem will go away. (I thought TCP/IP helped get rid of CRC errors.)
    I had another problem and that was...
    Error 1603 and 1604 : These are USB driver connectivity problems.
    Recommendation : FULLY uninstall and re-install itunes software as stated in the Apple support documentation. Be sure to reboot between each step and these problems should clear themselves up. In addition, firewalls and anti-virus software may cause these errors as well.
    Finally, shame on apple for not properly documenting their software so that end users do not have to decrypt their error messages with no true support to solve the issues. These are problems that enough people have had that there should be specific documentation on these problems.

Maybe you are looking for