I want to format a disc into FAT32 format

I have bought a TV that supports recording and timeshift to harddrives that uses FAT32.
So, no I try to format a harddrive to FAT32 but cannot find this option on my Win7 system.
What can I do?

In addition to Lewis Renwick's post, you can try formatting using Command Prompt. Goto start -> type cmd -> press Ctrl+Shift+Enter. Click Yes if UAC prompts.
Type format <drive letter>: /fs:FAT32 and then press Enter. This will format the partition in FAT32.
Additionally, you can use DISKPART to format the HDD:
C:\> Diskpart
DISKPART> list disk
DISKPART> select disk (id)
DISKPART> online disk (if the disk is not online)
DISKPART> attributes disk clear readonly
DISKPART> clean
DISKPART> convert mbr (or gpt)
DISKPART> create partition primary
DISKPART> select part 1
DISKPART> active (if this is the boot partition)
DISKPART> format fs=fat32 label=(name) quick
DISKPART> assign letter (letter)
DISKPART> list volume
This will format the complete HDD to FAT32 filesystem.
Balaji Kundalam

Similar Messages

Re: Need to format an internal hard drive into FAT32, how?

OK, this is no playstation forum but bear with me.
I bought a new 1 TB samsung internal HDD for my playstation 3 but it will not recognize it, probably because it is not pre-formatted into FAT32. I need to format this drive. I tried to put into an old laptop and do it but the connections were different. I put it into my Satellite A500-12W and thought I would use an old windows XP cd and find a "format" option instead of installation. However, the computer would not boot from the CD with the new hard drive in. I got the error message:
"PXE-E61: media test failure, check cable
PXE-MOF: exiting Pxe rom"
The drive is brand new and should not be faulty. I had created Sattelite recovery discs before so I put number 1 in and then I reached the installation process but it seemed I had no option but to install the entire thing which is 4 DVDs and when I did it before I recall it being a days work (formatting often is with all the OK's that needs to be pressed) and I am working a lot these days, I would like to avoid making a full install just to be able to felete everything again and format it into FAT32. Since we are talking about the internal drive I can't just do it from windows since there is no windows on it....
The user manual has nothing useful to contribute, I have looked through setup looking for a "format" option but can't find one.
Can anybody help me? Can I for example enter MS-DOS without an operating system istalled and do it from there? All I want is an empty FAT32 HDD....

Hi
I assume you have formatted the HDD in FAT32 but you didnt create an partition.
You have to create an partition on the HDD and then you can format this in FAT32
Then the full 1TB should be accessible.
You can do this using tool like fat32format
Copy this fat32format on diskette or HDD. Its not big 24kb
Now you have to point to the fat32format.exe and have to start this application using command fat32format.exe
Then use command fat32format X: (X means the HDD drive in most cases its C)
Now you have to press Y for Yes
Other method:
Boot the notebook using an Linux Live CD like Knoppix
Such linux does not need to be installed on HDD.
Now Linux should be able to access the HDD and you could create an FAT32 partition on this HDD

I want to format FAT32

I have a hard drive in a USB enclosure and I need to format it FAT32 from my Mac. Can I do this and confirm that it's FAT32?
chris

First: Check to make sure MS-DOS (FAT) shows up, this is FAT16 NOT FAT32 as everyone says it is. I am 100% sure as I checked the block size on linux and windows.
This part can get very TECHY for some, so don't go any further unless you know what I am talking about.
If you are not seeing MS-DOS in the erase or partition tabs this means the MBR (Master Boot Record) has not been added to the Hard Drive. Doing so will ERASE everything.
Adding MBR (open disk utility):
1. Click your HARD DRIVE on left you want to format
2. Click Partition Tab
3. Click the "Volume Scheme" Pull down, Partition 1, 2 and so on.
NOTE: Before you begin, if you have a Firewire 800 Drive, i recommend you partition most of you space as Mac OS Extended. This is so you can take advantage of the Speed on FW800 and size of individual files. On a FAT32 partition you have a limitation on a single file size. If you are NOT doing video then this is not really a problem for you. I think the limit is 2GIGS per file in FAT32, on Mac OS Extended its unlimited.
4. Once you select a partition type you should see the "Options..." button enabled.
5. Click "Options"
6. Select "Master Boot Record", Click "OK"
7. Set your first partition to your larger of the two, (Example: 300gb to Partition 1, 200gb to Partition 2).
8. Select the Format you want under "Format" menu, do this for both partitions or a single partition if you choose to do a single FAT32 partition.
9. Click "Apple" when done, keep in mind this will erase everything on the drive
Tech Part: This may damage the drive if not used correctly. Be very careful what you type. BE WARNED!! I am not responsible for your damages.
1. Select the drive you want FAT32
2. Right Click the drive select Information (or press Apple+I)
3. Disk Identifier is what you are looking for, should be something like disk1s#
4. Right Click the drive select Unmount
4. Open a terminal (Application->Utilitiies->Terminal.app)
5. Type:
newfs_msdos -F 32 -v "MyDriveName" /dev/rdisk1s#
The drive should be the same exact name as you noted above, only with the "r" added to the beginning of the name.
Be sure to DOUBLE check everything, this will wipe the drive.
After running newfs_msdos, you can mount your drive by going back into Disk Utility right click the drive and select Mount.
Also, be sure the first step of checking if "MS-DOS (FAT)" is an available option. If it is not, you will get an error when running the newfs_msdos command on the drive when inside "Disk Utility" and repair will NOT work on the drive.
I hope this helps someone. As it took me a few hours of playing around to get this to work correctly. I still don't know why apple does not have FAT32 as an option yet you can do it via the command line.

I want to import a Universal disc into iMovie

Hi
I want to import a Universal disc formated disc into iMovie, any one know how?

Handbrake.
Google it.

DvD will not mount but cd-r will When I install the the disc into the super drive the format box comes up which is not the same box that comes up when installing a cd-r.

DvD will not mount but cd-r will When I install the the disc into the super drive the format box (disc utilities) comes up which is not the same box that comes up when installing a cd-r. I check the priference settings under general and it is set to show on the desk top.

Not yet will have to get one from a freind. I bought a stack of the Sony DVD+R and that is all I have.

I am facing 'How do you want to use this disc' whenever I read/open any lightscribe discs having data.

Hi,
When I insert a lightscribe DVD/CD into a lightscribe optical drive, then when I click to open the DVD, I faced this error 'How do you want to use this disc', although the DVD was full of data. When opening these
lightscribe DVD/CD via NON lightscribe optical drive, I noticed that the DVD/CD opened well without any problems at all.
Also, how can the System show to me 'How do you want to use this disc' , in particular when a DVD is non rewritable(DVD-R) and also contains data)?
Bear in mind, not all DVDs/CDs were not detected. However, only full lightscribe discs' (having data)
However, even blank lightscribe discs were detected without problems. When insert a lightscribe disc having data, then I faced that error. However, when inserting blank lightscribe discs I found that the disc were opened. Also,
non lightscribe discs were opened well.
When checking the device manager, I didn't see any issue with DVD/CD drive. If there were a problem unrecongnising, then I would have seen 'a remarkable mark' in front of it.
Note: I have faced this problem after trying formating a rewritable CD inserted onto the drive. Althouthg the format failed, all data on the disc was deleted. Anyway, after that, then inserting full-lightscribe discs are unregonised
Do you think the problem wth my optical drive. IF so, I would be saying why it wasn't happened with all other non lightscribe discs. If my lightscrib discs were corrupted, then why would they have opened well on another laptop.
I have done:
Press the Windows logo key+R to open the Run dialog box.
Type devmgmt.msc in the Run dialog box, then press Enter. If you are prompted for an administrator password or for a confirmation, type the password, or click Allow
In Device Manager, expand DVD/CD-ROM drives, right-click the CD and DVD devices, and then clickUninstall.
When you are prompted to confirm that you want to remove the device, click OK.
Restart the computer.
But the same prolbem is existing.
yes there is a virtual CloneDrive program installed on my PC, however, there is no any CD mounted into it. Even if a CD was mounted into Virtual Clondrive, there would be no problem at all, because the virtual CloneDrive is used to only
mount ISO disc images into it, and not physical discs.
Any I have do what you have said, when inserting a light-scribe disc having data, then I open it, I found this
NOTE: in the above screen shot there is a lightscribe DVD having data inserted. However, in the screen shot below, there a ightsrbe DVD not having data inserted. In the first screen shot, the disc is not reconginsed by Windows, however, in
the second is recognised.
Even when I have inserted a lightscribe disc not having data(empty), it opened well regardless of what virutal CloneDrive is enabled or disabled.
But when cliced on my problem didn't solve,
A man should convert his anger and sadness into strength to continue living in this life.

Hi,
The product Name of my computer is: HP Pavilion dv6-6093ex Entertainment
Notebook PC support
The number of my computer is : LM610EA#A2N.
Could anyone please at this splendid forum take some of their precious time
out to really reply my questions and solve my problems?
FIRST OF ALL:
My HP Pavilion Laptop is about 3 years old.
My
sister's Dell Inspiron laptop is 3 years old.
My HP lapotp is well-cared, as opposed to my sister's Inspiron Dell laptop,
which is always thrown in dust without caring at all. Also, its battery is
always inserted even when it is fully charged while the laptop is plugged in to
the main power supply.
However, my laptop is either used on only battery, or on plugin. Also, it is
kept from the dust.
But, I really found that the battery of the Dell laptop
still lasts about three and half hours, and there is no problem cooling fan is
not oproperly preporly.
I only remember one thing differently done on my laptop battery which is I
charged it fully, then I stored it without using it for about four months, then
when I reused it, I found it got worse over time. I.e. first time of using it
after storing,I found it empty, then I charged it again fully, however, then it
lasted about 2 hours, then 1 and half hours, next an hour, now it is only
lasting about 20 minutes without performance. If there is high performance, then
the computer shuts down suddenly.
My problem is follows:::
First: Whenever I inserted any Containing Data OR Data
CD/DVD-R LightScribe discs, I found that HP optical driver was
unable to read them. When clicking on the optical disc drive
'duble-click', then I find that disc opens as this way(NOT: With a CD/DVD player
is grayed out)
Blank Or Used CD, DVD±R,RW lightscirbe is unable to be
read:(clicking on it let it Open like a USB FlashDrive or With a CD,DVD player:
NOTE: with CD/DVD Player is grayed out)
Used CD/DVD±R/RW Non-LightScribe disc opens normal:
Blank CD,DVD±R,RW Non-LightScribe opens normal(Opens like a USB FlashDrive or
With a CD,DVD)::
My HP CD/DVD DVD±R/RW specis are::
Optical Drives
hp CDDVDW TS-L633R
Media Type DVD Writer
Name hp
CDDVDW TS-L633R
Availability Running/Full Power
Capabilities Random
Access, Supports Writing, Supports Removable Media
Read capabilities CD-R,
CD-RW, CD-ROM, DVD-RAM, DVD-ROM, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD-R DL, DVD-RW
DL, DVD+R DL
Write capabilities CD-R, CD-RW, DVD-RAM, DVD-R, DVD-RW, DVD+R,
DVD+RW, DVD-R DL, DVD+R DL
Config Manager Error Code Device is working
properly
Config Manager User Config FALSE
Drive E:
Media Loaded
FALSE
SCSI Bus 0
SCSI Logical Unit 0
SCSI Port 0
SCSI Target Id
1
Status OK
Trying to solve the problem,
I have done these steps in order::
I tried checking with dignostic ulitiy:
I have tried Advanced View , this is the file of output data
diagnostic utility
LightScribe System Software Settings:
SOFTWARE\LightScribe\MessageDir
C:\Program Files (x86)\Common
Files\LightScribe\
SOFTWARE\LightScribe\LSPrintDialog C:\Program Files
(x86)\Common
Files\LightScribe\LSPrintDialog.exe
SOFTWARE\LightScribe\LSPrintingDialog
C:\Program Files (x86)\Common
Files\LightScribe\LSPrintingDialog.exe
SOFTWARE\LightScribe\LsPrintLauncher
C:\Program Files (x86)\Common
Files\LightScribe\LSPrintLauncher.dll
SOFTWARE\LightScribe\ResourceDir
C:\Program Files (x86)\Common
Files\LightScribe\res
SOFTWARE\LightScribe\LSPrintAPI C:\Program Files
(x86)\Common
Files\LightScribe\LSPrintAPI.dll
SOFTWARE\LightScribe\Update\UpdateShellCommand
http://www.lightscribe.com/go/downloads/windows
SOFTWARE\LightScribe\Update\PreviousVersion
1.18.20.1
SOFTWARE\LightScribe\Update\CurrentVersion
1.18.27.10
SOFTWARE\LightScribe\Update\TrailingVersion
SYSTEM\CurrentControlSet\Services\LightScribeService\Type
16
SYSTEM\CurrentControlSet\Services\LightScribeService\Start
2
SYSTEM\CurrentControlSet\Services\LightScribeService\ErrorControl
0
SYSTEM\CurrentControlSet\Services\LightScribeService\
SYSTEM\CurrentControlSet\Services\LightScribeService\DisplayName
LightScribeService Direct Disc Labeling
Service
SYSTEM\CurrentControlSet\Services\LightScribeService\ObjectName
LocalSystem
SYSTEM\CurrentControlSet\Services\LightScribeService\Description
Used by the LightScribe software components to support 3rd party disc labeling
applications using the LightScribe COM Application Programming Interface
(LSCAPI). This service needs to run for LightScribe direct disc labeling to
work.
SYSTEM\CurrentControlSet\Services\Eventlog\Application\LightScribeService\
SYSTEM\CurrentControlSet\Services\Eventlog\Application\LightScribeService\
SYSTEM\CurrentControlSet\Services\Eventlog\Application\LightScribeService\TypesSupported
7
SYSTEM\CurrentControlSet\Services\Cdrom\Enum\0
IDE\CdRomhp_CDDVDW_TS-L633R______________________0300____\4&334f7860&0&0.1.0
SYSTEM\CurrentControlSet\Services\Cdrom\Enum\Count
2
SYSTEM\CurrentControlSet\Services\Cdrom\Enum\NextInstance
2
SYSTEM\CurrentControlSet\Services\Cdrom\Enum\1
SCSI\CdRom&Ven_ELBY&Prod_CLONEDRIVE&Rev_1.4\1&2afd7d61&0&000000
SOFTWARE\Microsoft\Windows
NT\CurrentVersion\Winlogon\allocatecdroms
0
SYSTEM\CurrentControlSet\Services\CDRom\autorun 1
SOFTWARE\INTEL\Intel
Application Accelerator Not detected
Drives and Media:
Drive 0 : hp CDDVDW TS-L633R 0300 219 (E, Media
Imaging Parameter : 114
I tried running the below command line to fix potential disk issue 'Chkdsk
/r /f'
I cleaned the drive, discs, and so on.
I have uninstalled the all third-party data recording software.
I have uninstalled the Cyber DVD suite, lightscribe system software which
came pre-installed with my HP pavilion Notebook.
I have recovered my system from the Factory Recovery discs.
I have tried opening all those LightScibe discs not opening on my HP optical
drive, on a Dell optical drive, and all of them were opened well, although Dell
optical drive did not have a lightscribe feature at all., nor third party disc
recording software
However, the problem is still with opening the discs LIGHT-SCRIBE
Thus, my questions are:
How to determine if the drive is corrupted and needs to be replaced with
another one.
I think there something needed to be done on the BIOS Of my HP
laptop[[[A similar problems happened on my Desktop computer's optical
drive which is as follows:::(ALL discs are opened as empty by Optical Drive of
My Desktop Computer) ---while my optical drive of my desktop was connected to
the primary slave IDE, and the HDD was connected to the
primary master IDE, the optical drive and hard disk are functioning
well. However, I remember that while burning an image with Nero essential V: 5,
something went wrong, and then the Optical Drive of My Desktop Computer
(HL-DT-ST DVD-RAM GH22NP20) became NOT recognised/Installed on
BIOS, although it was still shown on the device manager as a
recognised device. Also, it was listed on my computer, however, when entering a
disc(blank or with data) into the drive, I found it was not recognised, and it
opened empty(no files at it), although it contains data. Thus, I decided to boot
to BIOS, and clicked on 'Autodetection for IDE', then I found that only HDD was
still shown as installed on BIOS. However, the optical drive was not. Th I tried
clicking on it on BIOS and then clicking on 'enter' to try to let the device be
re-recognized. However, that made no difference. I had to take part my computer
,and then reconnected the optical drive onto the secondary slave
IDE , and let HDD connected to the same primary master IDE.
Then, I found that the problem solved and all discs became being read
normally. Aslo, optical drive became installed on BIOS]]]
What is meant with with double Layer Support.
How much does it cost?
A man should convert his anger and sadness into strength to continue living in this life.

I have an external drive - WD My Passport FOR MAC. I want to format it to work on both mac and windows. Which format do you think I should use? Will either one cause damage to the files on the hard drive?

I have an external hard drive - WD My Passport FOR MAC. I want to format it to work on both mac and windows. I also want to be able to connect it to my TV and watch movies.
I read up and I think I am supposed to use exFAT or FAT32? I also saw MS-DOS. Which format should I should use? Will any of them cause damage to the files on the hard drive?
My little memory stick uses MS-DOS and it works on both mac and windows.
Please can you just tell me a little about each and suggest which one to use.
I know how to change it once you tell me so don't waste your time writing about changing it.

Will any of them cause damage to the files on the hard drive?
WARNING: FORMATTING A DRIVE ERASES IT COMPLETELY !!
If you need to carry large files (e.g., larger than about 4GB) back and forth, you may need ExFAT. Otherwise MS-DOS works for smaller files.
The Mac can Read, but not write Windows New Technology File System (NTFS) without an add-on program such as Paragon NTFS.

I have a huge file which is in GB and I want to split the video into clip and export each clip individually. Can you please help me how to split and export the videos to computer? It will be of great help!!

I have a huge file which is in GB and I want to split the video into clip and export each clip individually. Can you please help me how to split and export the videos to computer? It will be of great help!!

video
What version of Premiere Elements do you have and on what computer operating system is it running?
Please review the following workflow.
ATR Premiere Elements Troubleshooting: PE11: Project Assets Organization for Scene and Highlight Grabs from Collection o…
But please also determine if your project goal is supported by
a. format of your source
and
b. computer resources
More later based on details that you will post.
ATR

Videos I burnt to disc on my pc won't play on my macbook, when I insert the disc into the macbook it says it's blank but plays fine on the pc

Videos I burnt to disc on my pc won't play on my macbook, when I insert the disc into the macbook it says it's blank but plays fine on the pc, does anyone know how to fix this? The photo's I burnt on the exact same type of disc work fine in both pc and macbook but the videos will only play on the pc.

If you are trying to play these on quicktime then what video format are those videos?
Wmp's? You need to install Flip4Mac.
Most other formats? Install Perian.
Or just use vlc instead. It's a much better, more powerful, and more general video player.

Ipod recognised on vista but wants to format it...

Basically i've recently re-installed vista64 after it went faulty, went to setup itunes/ipod on this install and it's not being picke dup properly.
If i plug in the ipod, itunes says its corrupted and wants to run a restore, vista wants to format it.. can't explore the drive in my computer etc
if i plug the ipod into my other pcs or one in work it works fine, can explore the drive etcetc.
anyone any ideas what the problem is, tried 3 different versions of itunes, different usb ports etc

oh aye and it's a 5th gen 80gb ipod

Hello, I just want to formate the computer and start fresh??

Hello, I just want to formate the computer and start fresh??

NavarroSergio,
since you have a Late 2011 model, you can use OS X Internet Recovery to start fresh.
First, you’ll need to completely erase your internal disk. Boot your MacBook Pro into Recovery mode by holding down a Command key and the R key as it starts up. Once the Mac OS X Utilities menu appears, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk (typically the first item in the list). On the right-hand side, click on the Erase tab. In the Format dropdown menu, select “Mac OS Extended (Journaled)”; in the Name textbox, enter a name for the reformatted volume (“Macintosh HD” is typical). Press the Erase… button, and erase your disk. When the erasure is completed, exit Disk Utility and select Shutdown from the Apple menu.
The next time that you start up, OS X Internet Recovery will download your MacBook Pro’s original version of OS X (either 10.7.2 or 10.7.3) from Apple’s servers, and then install it. When it finishes, you’ll again see the welcome video just like when you first got it. Fill in your relevant information as you did the first time, and when you log in for the first time, run Software Update to get back to 10.7.5.

Want to write some data into xls or cvs in defferent sheet

Hello,
     I want to write some data into xls or cvs in defferent sheet (under one xls or csv file).
     suppose i have 3 StringBuffer i want to to write one StringBuffer into one sheet1 another one in sheet2 and last one in sheet3.
     Please suggest me somthing.

First of: csv files don't have sheets. Only Excel files have that.
Second: for Excel you'll have to find a library that implements that format for you. Apache POI is one possible choice, jExcelAPI is another one.

I'm going to give my iMac (21" - late 2007) to my brother. So, I did a back-up and now I want to format it and create his new profile. What to do and how? I have OS.x 10.7 (Lion)

I'm going to give my iMac (21" - late 2007) to my brother. So, I did a back-up on an external disk and now I want to format it and create his new profile. What to do and how? I have OS.x 10.7 (Lion). Thanks very much for your support and help.

Welcome to Apple Support Communities
There isn't a Late 2007 21-inch iMac. I think you are referring to a Mid 2007 20-inch iMac, right?
In that case, you can't give him your iMac with OS X Lion. OS X Lion is registered to your Apple ID, and he won't be able to reinstall Lion unless you give him your Apple ID.
The best you can do is to give him the Mac with Snow Leopard installed, if you have the DVD. Follow these steps:
1. Insert the DVD and hold the C key while your computer is starting.
2. Choose your language, and go to Utilities menu (on the menu bar) > Disk Utility.
3. Choose Macintosh HD in the sidebar, go to Erase tab and erase the disk.
4. Close Disk Utility and reinstall Mac OS X. When the installation finishes, hold the mouse or trackpad to eject the disc and turn off the computer.
This is the most recommended way to do it and avoid problems. Anyway, if you insist on giving him the iMac with Lion, you just have to start in OS X Recovery (holding Comman and R keys while your computer is starting), use Disk Utility to erase Macintosh HD as described above, and finally, reinstall Lion with your Apple ID

I want to format my mac, can some one help me?

I want to format my mac, can some one help me?

This is done with Disk Utility when your Mac is booted from the OS X install disc.
http://www.macusersguide.com/2009/05/reformatting-hard-drive/

Is it possible to use my music files in both my girlfriend's and my separate Itunes libraries through our seperate user accounts?? I want to import my music into her library with out copying the files onto my hard drive a second time....

Is it possible to use my music files in both my girlfriend's and my Itunes library's through our seperate user account? I want to import my music into her library without copying to my hard drive a second time.....

Would any of these help you?:
http://www.apple.com/itunes/inside-itunes/2011/05/two-ways-to-share-media-librar ies-through-itunes.html
http://www.apple.com/itunes/inside-itunes/2011/01/keeping-multiple-itunes-librar ies-on-a-single-computerif-you-share-your-computer-with-others-and-you.html

I want to format a disc into FAT32 format

Similar Messages

Maybe you are looking for