I want to maintain discount by default

Dear Guru's,
In my client contract vendor is giving some % of discount, so now i want to maintain the same in info record, so while creating the PO, the net price needs to be selected from info.pls guide me what i need to do ?
B/regds,
CB

Hello,
Supplementary conditions are usually maintained for a certain condition type (main condition). Supplementary conditions are stored with their associated main condition in one data record in a condition table (=condition record).
All supplementary conditions that the system is to suggest for a certain condition type must be grouped together in a separate calculation schema (see below). This calculation schema must be stored for this condition type (main condition).
Example: Discounts/surcharges and freight costs are frequently maintained in relation to the gross price (PB00). They are therefore entered as supplementary conditions belonging to the gross price.
The supplementary conditions are grouped together in calculation schema RM0002. This schema is assigned to condition type PB00.
Regards,
Shailesh

Similar Messages

In material master costing 1 tab i want to maintain by default as origin

Hello,
i want to maintain in material master costing 1 tab by default material orgin field has been check where i do these settings to mainatin
sudarshan

hello Vijay
this shoulb be applicable for all materials and when i creating the material master the field material orging should be selected as default where i can do these settings to get as default in Material master
Thanks in advance for your reply
sudarshan.

I downloaded iMesh and I can't stop it from automatically popping up each time I request a new tab. I have uninstalled the program, but I want to stop it from defaulting as a new tab. I tried uninstalling, but it is no longer installed as an add-on

I downloaded iMesh and I can't stop it from automatically popping up each time I request a new tab. I have uninstalled the program, but I want to stop it from defaulting as a new tab. I tried uninstalling the add on and plug in, but it is no longer installed as an add-on or plug in. How do I get the "new tab" request to simply open with a blank address in the address box instead of www.imesh.com.

Ok, I finally managed to get rid of it.
First I did the thing with the about:config but I flitered for imesh instead and managed to reset two thing but when I got to the keyword.URL I got the same thing as lolbabe98 did with the "An attempt to change your search engine or homepage was blocked."
Then I did a search on my C: drive for iMesh and discovered some things that hadn't been removed even though I had unistalled both the toolbar and the actual program. After that it worked fine and I now have a regular "untitled" tab when I open a new tab.
One last thing, when I tried to remove some of the files there was one that said it was in use, it was called datamanagerUI or something rather. The only thing I had to do there was to open Task Manager and kill a process called DATAMN~1 and I was able to remove it. Hope this helps.

I do not want Bridge to be the default program for opening folders.

I have recently upgraded from CS5.5 to CS6 Design and Web Premium. Since my upgrade, when I click on any “folder” IExplorer no longer is my default browser for my folders. Bridge now opens all my folders. This is very annoying. I DO NOT want Bridge to be default. I tried uninstalling Bridge and it did not work, Bridge must have corrupted my registry.
When I tried to open a folder it warns me there is no program associated with this file. This is unbelievable that Adobe would do this. Why would you not give the user a chance to choose if they wanted Bridge to be the default folder browser. Or at least have an easy way to revert it back to IE.

I HATE that every time I try to open a “FOLDER” Bridge opens.
It seems the Adobe Forums are unreachable due to an update but using email I do respond nevertheless.
To be Honest, I don't understand how you are able at all to start Bridge when opening a folder?? Can you report back with details of System and version info of Bridge and maybe explain your workflow?
And Bridge is only slow for the first time, it needs to cache files first. Which brings me to the point that Bridge is a file browser and not so much as a folder browser. You can use the folder panel for an overview of the system content and folder structure and for fast and easy navigating.

Do not want launchpad to be the default import on images

I have the new mac pro (late 2013) and lightrrom 5 on os 10.10.2 . i import a lot of raw image files but when i do this on the new mac the launchpad wants to improt the files. I want LR to be the default software to import the files ( Like my old mac did!) can anybody help to turn off the launchpad prefreance and add Lr?
tahnsk
john

I HATE that every time I try to open a “FOLDER” Bridge opens.
It seems the Adobe Forums are unreachable due to an update but using email I do respond nevertheless.
To be Honest, I don't understand how you are able at all to start Bridge when opening a folder?? Can you report back with details of System and version info of Bridge and maybe explain your workflow?
And Bridge is only slow for the first time, it needs to cache files first. Which brings me to the point that Bridge is a file browser and not so much as a folder browser. You can use the folder panel for an overview of the system content and folder structure and for fast and easy navigating.

How to create a day type in Infotype 0041 (Want to maintain EE Retirement date)

Dear Consultants,
Can any buddy tell how to create a day type (Retirement date) in Infotype 41,
My client want to maintain employees retirement date in Infotype 0041, please share your Ideas.
Thanks & Regards,
Navesh

Hi Sridevi,
Thanks for quick reply.
Regards,
Navesh

In View, I want Bookmarks to be the default not History which is what is happening

In View, I want Bookmarks to be the default not History which is what is happening. I don't know why but I like using History but I primarily use Bookmarks.

Nevermind - I answered my own question, which is I CAN"T READ ANY BOOKS I purchased in iBooks on my MacBook Pro. If I want to read on my mac I have to use Kindle or Nook. Which means any book I've already purchased through iBooks has to be read on my iPad. Kind of a drag because there are times when it's more convenient for me to read while I'm sitting with my Mac.

I want to maintain the interantional code of 233 in the contact list

I want to maintain the interantional code of +233 in the contact list & still have the name shown when the caller calls. Anyone know how to enable this happen on iphone 5s

You can get the source code (written in C++) of Sun's VM under the Community Licence arangement. Not sure quite where it is on this site, but if you look for it, I'm sure you'll find it.
BTW, it's not easy reading.
Sylvia.

I want to maintain Safari 10.6.8 on my computer and then install Maverick on a separate internal drive so I can run new FCPX software and maintain the older OS for my older software versions. Can you tell me how please?

I want to maintain Safari 10.6.8 on my computer and then install Maverick on a separate internal drive so I can run new FCPX software and maintain the older OS for my older software versions. Can you tell me how please?
I see an upgrade path from Safari but don't want to change that and would like to be able boot from Maverick when needed.
Is this possible and how?
Thank you!

On the Apple site I see an upgrade path but not from scratch. I will use my current systems and then it place a complete install of Maverick on the other drive to boot from?
Thank you!

I want to maintain payment terms...material wise

hi,
Experts,
here i want to maintain vendorwise and material wise payment terms....Vendorwise payment terms its ok i got it but how to maintain paymet terms for material.....is there any way to do maintain material wise payment term...
thaks in advance.......
Regards....
sunil.....
Helpful Ans will be awarded...

Hi,
Sorry to say but all the alternatives suggested did not work.
Because fundamentally what you are trying to do Sunil is not logical.
e.g. X person wants 100 qty of material, y person wants 2000 qty of material, the terms of payment are always dependent on the quantity of material, never on the material.
also various other factors play a role in determining payment terms:
like credit check,
payment history,etc
these terms are all related to the customer only.
thus depending upon the fact that majority of its dependant fields are invovled with customer, it can only be configured with respect to customer.
plz clarify on the situation as to why do you need to configure it on material basis.
regards,
Siddharth.

I want Google Search as my default search engine but SpeedBit Search is always interfering as default. What shall I do?

I want Google Search as my default search engine in Mozilla Firefox but every time when I open Firefox, SpeedBit Search is opening up instead of Google search. What shall I do?

Troubleshooting extensions and themes
* https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
Search bar
* https://support.mozilla.com/en-US/kb/Search%20bar
Location bar search
* https://support.mozilla.com/en-US/kb/Location%20bar%20search
Check and tell if its working.

Firefox by default opens the last used profile. I want it to open the default profile always unless specified with -P option

To make it more clear. If I use the following command
firefox -P profileRare
and then close the firefox, When I open the firefox again with by giving
firefox
It opens the profileRare again. Is there anyway to override this behaviour and open default profile when I call firefox without -P option?

Make sure that the profile that you want to use as the default is set as Default=1 in the file [http://kb.mozillazine.org/profiles.ini_file profiles.ini]
If you use -P "profile_name" then the selected profile shouldn't change. Only if you use the profile manager and select a new profile then that profile will become the last selected profile, so make sure that "Don't ask at startup" is selected.

I have a macbook air/ipad/phone, etc. I use my macbook for my home business and bought a TC. My husband does not want it to be our default wifi. Does it have to be?

I have a macbook air/ipad/phone, etc. I use my macbook for my home business and bought a TC to do backups. My husband does not want it to be our default wifi/modem as he is exclusively a PC user. Does it have to be? I thought it did everything wirelessly?? I don't want to start disconnecting our modem/router etc as we are all set up with wireless printing and backups for that computer. If I have to muck around with it I am thinking of not bothering??

The TC will connect to your existing modem/router using an Ethernet cable. You will not have to use the wireless on the TC....you can even turn it off if you wish.
Backups to the TC will occur over your existing wireless.
Connect from a LAN <-> port on the modem/router to the WAN "O" port on the TC. Locate the TC anywhere that the Ethernet cable will reach. You can run the cable up to 300 feet with no loss.
Things will not automatically configure themselves. You will have to do some mucking around....no more than you would if you were installing the TC anywhere else.
Configure the TC to "create a wireless network". Once it is setup, you can ignore the TC wireless, or turn it off.

HT1338 Hello, I dropped coffee on my keyboard. I wiped the coffee off as fast as I could, BUT I hit al sorts of buttons while it was still connected to my computer. NOW Everything looks photo negative. I want to restore my desktop defaults.

Hello, I dropped coffee on my keyboard. I wiped the coffee off as fast as I could, BUT I hit al sorts of buttons while it was still connected to my computer. NOW Everything looks photo negative. I want to restore my desktop defaults.

Hit control-option-command-8 to reverse the negative effect. You can also do this, and check other settings, in System Preferences>Universal Access.

Want to maintain Material Master fields as default

Dear Friends,
Material Pricing Grp
Product Hierarchy
Acc assignment grp
Item cat Grroup (sales)
This fields I would like to make as default with recpective val.
Let me know if u hav solution.

Hi N Thombare
You can maintain these fields as mandatory in your material master...U must be using field reference i.e. say for eg 0001 or whatever which u can see in T Code "<b>OMSA</b>".......Against that field reference; u keep below mentioned fields as mandator i.e. in T Code "<b>OMS9</b>"........But these will help u to keep these fields as mandatory.......which means w/o entering values; u may not save material master
If required; assign these fields to field groups in OMSR
I hope it will solve your problem
Rgds

I want to maintain discount by default

Similar Messages

Maybe you are looking for